Solid–liquid equilibria in the acetic acid–propanoic acid and propanoic acid–trifluoroacetic acid systems

Solid–liquid equilibria in the binary systems, propanoic acid–acetic acid and propanoic acid–trifluoroacetic acid, were measured by a synthetic method. A solid compound (1:1) was found in the propanoic acid–trifluoroacetic acid system. The obtained activity coefficients were successfully fitted by the Wilson equation.     

Solvation model for acetic acid in binary mixtures of cyclohexane–1,2-dichloroethane

The partition of acetic acid between aqueous solutions and various binary mixtures of 1,2-dichloroethane and cyclohexane were studied at 30.0 °C. The observed nonlinearities of both monomer partition coefficient and dimerization constant in the organic phase with the mole fraction of 1,2-dichloroethane are interpreted in terms of the preferential solvation of various solvation sites of the involved species. Two polar sites were identified for the monomer each with a solvation preference by 1,2-dichloroethane seven times that by cyclohexane. This preference decreases to about two upon dimerization.     

Acylation of α-SCF3 substituted β-carbonyl acetic acid and thiacetic acid derivatives with oxalyl chloride

α-CF₃S-substituted β-ketoacidamides, nitriles, thioamides and their Schiff bases are synthesised and their reactions with oxalyl chloride are investigated. As a new phenomenon the elimination of the CF₃S group during cylcisation to substituted 2,3,5-trioxo-1,4-oxazephine (7), 4-pyrroline-2,3-dione (9) and oxalyl (10) is observed. Factors influencing this course of the reaction and mechanism of product formation are discussed.     

Structural insight into the anion–water cluster: stabilised by alcohol and carboxylic acid containing tripodal ligand

A new flexible N-bridged, unsymmetrical, water-soluble tripodal ligand (L) bearing alcohol and carboxylic acid groups has been synthesised and its solid-state interaction with anions has been investigated. The fully deprotonated ligand encapsulates a sodium cation in a half cryptand bowl-shaped cavity (1). The chloride complex 2, contains a cyclohexane-like water cluster incorporating ligand OH groups. However, complexes with bromide and nitrate (3 and 4) are dimeric. Tetrahedral clusters containing two water molecules and two anions were found in complexes 3 and 4. Perchlorate complex 5 forms perchlorate–methanol adducts. Complex 1 forms a hydrophilic cation–water channel and complexes 2–4 form anion–water channels between the hydrophobic layers of the naphthalene moieties. Complexes 2, 5 and 3, 4 are isostructural in nature having similar packing structures.     

Lanthanide–actinide separation by bis-2-ethylhexylphosphoric acid from citric acid–nitric acid medium

Phosphate rock (Pho-ore) is the starting raw material used in manufacturing of most phosphate products. This material contains phosphorous, natural uranium, thorium potassium radionuclide and other trace elements. Single super phosphate powder (SSPho-P), single super phosphate granules (SSPho-G), and triple super phosphate (TSPho) are the common phosphate products produced along with phosphogypsym (CaSO₄) as a waste product. Since these materials are industrially manufactured by the reaction of the phosphate ore with phosphoric and sulphuric acids, these products and the waste product are extremely acidic. Pho-ore, SSPho-P, SSPho-G, TSPho and CaSO₄ samples were used in our study. Chemical analyses showed that these phosphate samples contain phosphorous, iron, aluminum ions and traces of uranium ions. Accumulation of the fertilizers on soils usually transfers some of these ions from the fertilizer materials to the soil/water interfaces. The migration of uranium U(VI), P, Al and Fe in subsurface soils was found to be strongly influenced by the sorption/desorption reaction at the solid/water interfaces. Thus, dissolution of these ions in soil/water phases is very important. Speciation of U(VI), P, Al and Fe in soil/water phases were calculated using a geochemical code (MINTEQA2). This study was conducted to determine sorption properties and the surface electrical properties of these ions at the soil samples.     

Esterification of acetic acid with n-Butanol using vanadium oxides supported on γ-alumina

Esterification of acetic acid with n-Butanol has been studied in a heterogeneous reaction system using two γ-alumina-supported vanadium oxide catalysts with different V loadings, which were prepared by the impregnation of a precipitated alumina. The alumina support and the supported catalysts were characterized using X-ray diffraction, N₂ adsorption, EDX analysis and NH₃-TPD techniques. The effects of the reaction time, of the molar ratio of the reactants, of the speed of agitation and of the mass fraction of the catalyst on the catalytic properties were studied. In the presence of the supported catalyst containing 10 wt % V₂O₅ (10V-Al₂O₃ sample) the conversion reached 87.7% after 210 min of reaction at 100 °C with an n-Butanol-to-acetic acid mole ratio equal to one. The conversion as well as the total acidity measured by TPD of NH₃ increased in the following order: Al₂O₃ < 5V-Al₂O₃ (5 wt % V₂O₅/Al₂O₃) < 10V-Al₂O₃. In all cases the reaction was completely selective to n-butyl acetate. Nevertheless, a loss in catalytic activity after three reaction cycles with 10 V₂O₅–Al₂O₃ catalyst was observed.     

Neutral cholic acid–coumarin conjugate exhibit excellent anion binding properties by cooperative aryl CH and amide NH segments

A neutral cholic acid–coumarin conjugate was developed for anion recognition. It is revealed by the experimental and theoretical results that the coumarin group can provide CH segments as hydrogen bond donors by cooperation with the adjoining amide NH segments. With excellent biocompatibility, this receptor with coumarin as fluorescence sensors also have the potential to be used as an efficient and non-destructive probe for anion detection in living cells. This work displays a new insight into the importance of coumarin group as anion recognition group, which is not well presented so far.     

A catalyst for the carbonylation of methanol to acetic acid in gaseous phase

A novel Rh/Ys catalyst for the carbonylation of methanol to acetic acid in gaseous phase is reported. The porous carbon beads (Ys) prepared from the carbonation of poly(vinylidene chloride) were used as the support. This catalyst has a specific surface area of 1 000 m2/g, high mechanical strength and thermal stability. The average diameter of the pore is in the range of 0.8 - 1.2nm. Experimental evidence showed that this catalyst was of high activity and selectivity, which could compare to those of the homogeneous catalyst from Monsanto. The catalytic rate could get to 900 g AcOH/g Rh·h during the carbonylation of methanol to acetic acid. The fine spreading of Ph over the Ys surface is the key factor for the activity.     

Design and synthesis of novel tweezer anion receptors based on deoxycholic acid

A novel type of molecular tweezer receptors based on deoxycholic acid has been designed and synthesized and their binding properties were examined by UV-vis spectral titration. These molecular tweezers showed a high selectivity toward F- over Cl-,Br-, I-, AcO-, H2PO4-.     

Temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction with following back-extraction for HPLC/UV–Vis determination of 3-indole acetic acid in pea plants

In this work, the ionic liquid (IL)[C₆mim][PF₆] was used as IL-based extractant for dispersive liquid–liquid microextraction, followed by back-extraction and HPLC/UV–Vis determination of 3-indole acetic acid (IAA) in pea plant. The effects of some crucial factors such as chemical structure and volume of IL, pH adjustment, dissolution temperature, extraction time, centrifugation time, and ionic strength of aqueous sample were studied. The linear range of the HPLC method for IAA quantification was 17.5 × 10^?2–36.8 mg L^?1. LOD, LOQ, method recovery, and preconcentration factor values were 0.170 mg L^?1, 0.175 mg L^?1, 98.3, and 40 %, respectively. The RSD for the suggested method was calculated as 0.93 % at 35.04 mg L^?1 of IAA and each IL phase was able to be reused for at least four DLLME/back-extraction cycles. To evaluate the applicability of the suggested method, IAA was determined in pea plant samples.     

Does dehydrocyclization of 4-benzoylthiosemicarbazides in acetic acid lead to s-triazoles or thiadiazoles?

Ever since the recognition of strong pharmaceutical activities of triazoles and thiadiazoles, these scaffolds have been the subject of vigorous studies. One of the best strategies for synthesis of these azoles is dehydrocyclization of 1,4-disubstituted thiosemicarbazides, which leads to s-triazoles in alkaline media, whereas in strong acidic media 1,3,4-thiadiazoles are formed. However, the literature is riddled with contradictory communications regarding the nature of the products of such reactions under mild acidic conditions. As these compounds are not amenable to X-ray analysis, we have resorted to NMR and theoretical modelling to resolve this discrepancy. In this article, we present arguments indicating that dehydrocyclization of 4-benzoylthiosemicarbazides in glacial acetic acid leads to thiadiazole derivatives. These structural findings are augmented by studies of bioactivity of a few members of the studied class of compounds.     

Vapor–liquid equilibria of systems containing acetic acid and gaseous components. Measurements and calculations by a cubic equation of state

Isothermal pressure-composition VLE data have been measured for four systems containing acetic acid and a gaseous component. The gaseous components are carbon monoxide, carbon dioxide, hydrogen and methane. The measurements were made in a static cell and the compositions of the gas and the liquid phases were measured by a gas chromatograph. A new correlation model (ACE, Association+Cubic Equation of state) was developed. It is based on a cubic equation of state and a model for the dimerization of acetic acid. It was applied to correlate the experimetnal VLE data with good results.     

A dual–ion battery using diamino–rubicene as anion–inserting positive electrode material

A novel and non-polymeric anion-inserting electrode material has been designed and prepared for promoting research on molecular ion rechargeable batteries: 5,12-diaminorubicene (DARb). The apolar core structure of a rubicene molecule has been coupled to two amino-groups for producing an original conjugated primary diamine exhibiting low affinity for polar solvents such as common carbonate-based battery electrolytes. The electrochemical reactivity of this organic molecule has been probed in a dual-ion cell configuration (vs. Li) using six different electrolyte formulations in terms of solvent (PC, EC-DMC) and lithium salt (LiPF₆, LiClO₄, LiTFSI). This diamino-rubicene material systematically showed a reversible electroactivity and promising performances when using 1 M LiPF₆ in EC:DMC (1:1 vol.%) as the electrolyte, such as an average potential of ~ 3.4 V vs. Li⁺/Li⁰, an initial capacity of 115 mAh·g^− 1 and a good capacity retention over 60 cycles without any optimization.     

Kinetic asymmetric protonation as a stereochemistry determining step in theMichael addition of acetic acid derivatives to α-substituted cinnamic acid derivatives

Summary The reaction between acetic acid derivatives and -substituted cinnamic acid derivatives has been studied inTHF andTHF:HMPT (80:20) as an alternative pathway of theMichael addition of phenylacetic and cinnamic acid derivatives. The regioselectivity observed is found to depend on the acceptor functional group and its geometry but not on the solvent used. The diastereoselectivity of the conjugate addition results from kinetic protonation of diastereotopic enolates (1,2-asymmetric induction). It varies from low in the presence ofHMPT to considerable or even high in pureTHF. The favouredanti orsyn configuration inTHF depends on the nature of the enolate. The results obtained are rationalized in terms of protonationvia transition structures different in type (openvs. chelated) and geometry.

---

Kinetische asymmetrische Protonierung als bestimmender Schritt für die Stereochemie bei derMichael-Addition von Essigsäurederivaten an -substitutierte Zimtsäurederivate

Zusammenfassung Die Reaktion zwischen Essigsäurederivaten und -substitutierten Zimtsäurederivaten wurde inTHF undTHF:HMPT=80:20 als ein alternative Weg derMichael-Addition von Phenylessigsäure und Zimtsäurederivaten untersucht. Es wurde gefunden, daß die beobachtete Stereoselektivität von der Akzeptorgruppe und ihrer Geometrie, nicht jedoch vom Lösungsmittel abhängig ist. Die Diastereoselektivität der konjugierten Addition folgt aus der kinetischen Protonierung der diastereotopen Enolate (1,2-asymmetrische Induktion). Sie variiert von klein (bei Anwesenheit vonHMPT) bis bedeutend oder sogar groß (in reinemTHF). Die bevorzugteanti odersyn Konfiguration inTHF hängt von der Natur der Enolate ab. Die Ergebnisse werden durch eine Protonierungvia bezüglich Typ (offen oder chelatiert) und Geometrie unterschiedliche Strukturen des Übergangszustands erklärt.

     

Determination of major and trace elements in human scalp hair by pressurized-liquid extraction with acetic acid and inductively coupled plasma–optical-emission spectrometry

An analytical method has been developed for determination of major (Ca, K, Mg, and Na) and trace elements (As, Cd, Co, Li, Ni, and Sr) in human scalp hair. The proposed method includes a novel, simple, rapid, highly efficient, and automated metal-leaching procedure, by pressurized-liquid extraction (PLE), combined with a rapid simultaneous detection system—inductively coupled plasma–optical-emission spectrometry (ICP–OES). PLE is one of the most promising recently introduced sample-preparation techniques, with the advantages of reducing solvent consumption and enabling automated sample handling. The operating conditions for PLE, including concentration of the extraction solvent, extraction temperature, static time, number of extraction steps, pressure, mean particle size, diatomaceous earth (DE) mass/sample mass ratio, and flush volume were studied using an experimental design (Plackett–Burman design, PBD). The optimum conditions were use of 0.75 mol L⁻¹ acetic acid as extracting solution and powdered hair samples thoroughly mixed with DE, as a dispersing agent, at a DE mass/sample mass ratio of 4. Extraction was performed at room temperature and an extraction pressure of 140 atm for 5 min in one extraction step. The flush volume was fixed at 60%. The PLE-assisted multi-element leaching proposed is complete after 7 min (5 min static time plus 1 min purge time plus 1 min end relief time). Under the optimised conditions the figures of merit, for example limits of detection and quantification, repeatability of the over-all procedure, and accuracy, were evaluated. Analysis of GBW-07601 (human hair) certified reference material revealed accuracy was good for the target elements. The optimised method was finally applied to several human scalp-hair samples.     

Liquid–liquid equilibria of water/acetic acid/1-butanol system — effects of sodium (potassium) chloride and correlations

Sodium and potassium chloride were experimentally shown to be effective in modifying the liquid–liquid equilibrium (LLE) of water/acetic acid/1-butanol system in favour of the solvent extraction of acetic acid from an aqueous solution with 1-butanol, particularly at high salt concentrations. Both the salts enlarged the area of the two-phase region; decreased the mutual solubilities of water and marginally decreased the concentrations of 1-butanol and acetic acid in the aqueous phase while significantly increased the concentrations of the same components in the organic phase. These effects essentially increased the heterogeneity of the system, which is an important consideration in designing a solvent extraction process. The equilibrium data were well correlated by Eisen–Joffe equation with respect to the overall molar ratio of salt to water in the liquid phases. By expressing the salt–solvent interaction parameters as a third order polynomial of salt concentration in the liquid phase, Tan's modified NRTL model [T.C. Tan, Trans. Inst. Chem. Eng., Part A 68 (1990) 93–103.] for solvent mixtures containing salts or dissolved non-volatile solutes was able to provide good correlation of the present LLE data. Using the regressed salt concentration coefficients for the salt–solvent interaction parameters and the solvent–solvent interaction parameters obtained from the same system without salt, the calculated phase equilibria compared satisfactorily well with the experimental data.     

Importance of aliphatic C–H hydrogen bonding on anion recognition

We have designed and synthesised new anion receptors 1 and 2, both of their C–H groups were at the α positions to carbonyl groups and further polarised by the attached polarising substituents. This enabled us to study hydrogen bonding donor ability of C–H bonds. The polarising substituents are electron withdrawing cyano group for host 1, while charged pyridinium group for host 2. As expected from charge effects, host 2 shows roughly an order of magnitude higher binding constants against various anion guests than those of receptor 1. Since the magnitude of polarisation change should be greatest for C–H group among various hydrogen bonding groups, this indicates the importance of C–H hydrogen bonding. In contrast, the relative order of binding constants was the same for both host 1 and 2. The order of association constants was found to be (CH₃)₂POO^? > CH₃COO^? > C₆H₅COO^? > Cl^? > Br^?. DFT calculation results were in good agreement with experimental binding constants and confirmed the importance of charged group substitution. In addition, receptor 1 showed the highest association constant for dimethyl phosphinate, which is implicated in many metabolic diseases.     

Counterion and solvent effects on the anionic polymerization of β-butyrolactone initiated with acetic acid salts

The comparative studies on the anionic polymerization of β-butyrolactone (BL) initiated with various salts of acetic acid have revealed strong sensitivity of the reaction rate on solvent polarity (benzene, THF, DMSO) and size of counterion. It was found that the polymerization rate in THF depends on the size of counterion and the type of macrocyclic ligand; it decreases in the following order: K⁺/Kryptofix® 222 ≈TBA⁺ > K⁺/18C6 > Na⁺/18C6 > Na⁺/15C5 > K⁺. It was also shown that the anionic polymerization of BL initiated with carboxylic acid salts depends strongly on the solvent polarity. In the polymerization initiated by acetate anions with a large counterion, the high-polar solvent as DMSO affects unfavorably the reaction rate, however, when a small counterion is applied, the opposite tendency is observed.     

Magnetic nanoparticles grafted with β-cyclodextrin for solid-phase extraction of 5-hydroxy-3-indole acetic acid

We describe the synthesis of ß-cyclodextrin modified magnetic nanoparticles (CD-mNPs) as a material for solid-phase extraction of the cancer biomarker 5-hydroxy-indole-3-acetic acid (5-HIAA) from urine. The CD-mNPs were characterized by TEM, FTIR, and XRD, and the kinetics and adsorption isotherms were studied. The strong interaction between the CD-mNPs and 5-HIAA is the main driving force for recognition and extraction, while the magnetic core of the NPs allows their separation from the sample matrix. Recovery of 5-HIAA from the adsorbent using an adequate solvent regenerated the adsorbent for further use. 5-HIAA was then quantified by fluorometry of its complex with ß-CD. The method works in the 1?×?10^?7 to 1?×?10^?5 mol L^?1 (R² 0.9982–0.9996) concentration range, and the limits of detection (3σ) and quantification (10 σ) of the method are 1.2?×?10^?8 mol L^?1 and 4.01?×?10^?8 mol L^?1 5-HIAA, respectively. The recovery of 5-HIAA from urine samples spiked with 5-HIAA in three concentrations (1.4?×?10^?6, 4.50?×?10^?6 and 1.0?×?10^?5 mol L^?1) are within 63?±?3 %.