A computational study of supersonic disk-gap-band parachutes using Large-Eddy Simulation coupled to a structural membrane

Large-scale fluid-structure interaction simulations of compressible flows over flexible supersonic disk-gap-band parachutes are compared with matching experimental results. We utilize adaptive mesh refinement, large-eddy simulation of compressible flow coupled with a thin-shell structural finite-element model. The simulations are carried out in the regime where large canopy-area oscillations are present, around and above Mach 2, where strong nonlinear coupling between the system of bow shocks, turbulent wake and canopy is observed. Comparisons of drag history and its dependence on Mach number are discussed. Furthermore, it is observed that important dynamical features of this coupled system can only be reproduced when sufficient grid resolution is used. Lack of resolution resulted in incorrect flow-physics prediction and, consequently, incorrect fluid-structure interaction coupling.     

Residual‐based artificial viscosity for simulation of turbulent compressible flow using adaptive finite element methods

In this paper, we present a finite element method with a residual‐based artificial viscosity for simulation of turbulent compressible flow, with adaptive mesh refinement based on a posteriori error estimation with sensitivity information from an associated dual problem. The artificial viscosity acts as a numerical stabilization, as shock capturing, and as turbulence capturing for large eddy simulation of turbulent flow. The adaptive method resolves parts of the flow indicated by the a posteriori error estimates but leaves shocks and turbulence under‐resolved in a large eddy simulation. The method is tested for examples in 2D and 3D and is validated against experimental data. Copyright © 2012 John Wiley & Sons, Ltd.     

Numerical simulation of compressible two-phase flow using a diffuse interface method

In this article, a high-resolution diffuse interface method is investigated for simulation of compressible two-phase gas–gas and gas–liquid flows, both in the presence of shock wave and in flows with strong rarefaction waves similar to cavitations. A Godunov method and HLLC Riemann solver is used for discretization of the Kapila five-equation model and a modified Schmidt equation of state (EOS) is used to simulate the cavitation regions. This method is applied successfully to some one- and two-dimensional compressible two-phase flows with interface conditions that contain shock wave and cavitations. The numerical results obtained in this attempt exhibit very good agreement with experimental results, as well as previous numerical results presented by other researchers based on other numerical methods. In particular, the algorithm can capture the complex flow features of transient shocks, such as the material discontinuities and interfacial instabilities, without any oscillation and additional diffusion. Numerical examples show that the results of the method presented here compare well with other sophisticated modeling methods like adaptive mesh refinement (AMR) and local mesh refinement (LMR) for one- and two-dimensional problems.     

An h-adaptive solution of the spherical blast wave problem

Shock waves and contact discontinuities usually appear in compressible flows, requiring a fine mesh in order to achieve an acceptable accuracy of the numerical solution. The usage of a mesh adaptation strategy is convenient as uniform refinement of the whole mesh becomes prohibitive in three-dimensional (3D) problems. An unsteady h-adaptive strategy for unstructured finite element meshes is introduced. Non-conformity of the refined mesh and a bounded decrease in the geometrical quality of the elements are some features of the refinement algorithm. A 3D extension of the well-known refinement constraint for 2D meshes is used to enforce a smooth size transition among neighbour elements with different levels of refinement. A density-based gradient indicator is used to track discontinuities. The solution procedure is partially parallelised, i.e. the inviscid flow equations are solved in parallel with a finite element SUPG formulation with shock capturing terms while the adaptation of the mesh is sequentially performed. Results are presented for a spherical blast wave driven by a point-like explosion with an initial pressure jump of 10⁵ atmospheres. The adapted solution is compared to that computed on a fixed mesh. Also, the results provided by the theory of self-similar solutions are considered for the analysis. In this particular problem, adapting the mesh to the solution accounts for approximately 4% of the total simulation time and the refinement algorithm scales almost linearly with the size of the problem.     

A local domain‐free discretization method to simulate three‐dimensional compressible inviscid flows

In this paper, the domain‐free discretization method (DFD) is extended to simulate the three‐dimensional compressible inviscid flows governed by Euler equations. The discretization strategy of DFD is that the discrete form of governing equations at an interior point may involve some points outside the solution domain. The functional values at the exterior‐dependent points are updated at each time step by extrapolation along the wall normal direction in conjunction with the wall boundary conditions and the simplified momentum equation in the vicinity of the wall. Spatial discretization is achieved with the help of the finite element Galerkin approximation. The concept of ‘osculating plane’ is adopted, with which the local DFD can be easily implemented for the three‐dimensional case. Geometry‐adaptive tetrahedral mesh is employed for three‐dimensional calculations. Finally, we validate the DFD method for three‐dimensional compressible inviscid flow simulations by computing transonic flows over the ONERA M6 wing. Comparison with the reference experimental data and numerical results on boundary‐conforming grid was displayed and the results show that the present DFD results compare very well with the reference data. Copyright © 2009 John Wiley & Sons, Ltd.     

An immersed boundary solver for inviscid compressible flows

In this paper, a simple and efficient immersed boundary (IB) method is developed for the numerical simulation of inviscid compressible Euler equations. We propose a method based on coordinate transformation to calculate the unknowns of ghost points. In the present study, the body‐grid intercept points are used to build a complete bilinear (2‐D)/trilinear (3‐D) interpolation. A third‐order weighted essentially nonoscillation scheme with a new reference smoothness indicator is proposed to improve the accuracy at the extrema and discontinuity region. The dynamic blocked structured adaptive mesh is used to enhance the computational efficiency. The parallel computation with loading balance is applied to save the computational cost for 3‐D problems. Numerical tests show that the present method has second‐order overall spatial accuracy. The double Mach reflection test indicates that the present IB method gives almost identical solution as that of the boundary‐fitted method. The accuracy of the solver is further validated by subsonic and transonic flow past NACA2012 airfoil. Finally, the present IB method with adaptive mesh is validated by simulation of transonic flow past 3‐D ONERA M6 Wing. Global agreement with experimental and other numerical results are obtained.     

A simple shock‐capturing technique for high‐order discontinuous Galerkin methods

This article presents a novel shock‐capturing technique for the discontinuous Galerkin (DG) method. The technique is designed for compressible flow problems, which are usually characterized by the presence of strong shocks and discontinuities. The inherent structure of standard DG methods seems to suggest that they are especially adapted to capture shocks because of the numerical fluxes based on suitable approximate Riemann solvers, which, in practice, introduces some stabilization. However, the usual numerical fluxes are not sufficient to stabilize the solution in the presence of shocks for large high‐order elements. Here, a new basis of shape functions is introduced. It has the ability to change locally between a continuous or discontinuous interpolation depending on the smoothness of the approximated function. In the presence of shocks, the new discontinuities inside an element introduce the required stabilization because of numerical fluxes. Large high‐order elements can therefore be used and shocks captured within a single element, avoiding adaptive mesh refinement and preserving the locality and compactness of the DG scheme. Several numerical examples for transonic and supersonic flows are studied to demonstrate the applicability of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical simulation of compressible multifluid flows using an adaptive positivity-preserving RKDG-GFM approach

The Runge-Kutta discontinuous Galerkin method together with a refined real-ghost fluid method is incorporated into an adaptive mesh refinement environment for solving compressible multifluid flows, where the level set method is used to capture the moving material interface. To ensure that the Riemann problem is exactly along the normal direction of the material interface, a simple and efficient modification is introduced into the original real-ghost fluid method for constructing the interfacial Riemann problem, and the initial conditions of the Riemann problem are obtained directly from the solution polynomials of the discontinuous Galerkin finite element space. In addition, a positivity-preserving limiter is introduced into the Runge-Kutta discontinuous Galerkin method to suppress the failure of preserving positivity of density or pressure for the problems involving strong shock wave or shock interaction with material interface. For interfacial cells in adaptive mesh refinement, the data transfer between different grid levels is achieved by using a L² projection approach along with the least squares fitting. Various numerical cases, including multifluid shock tubes, underwater explosions, and shock-induced collapse of a underwater air bubble, are computed to assess the capability of the present adaptive positivity-preserving RKDG-GFM approach, and the simulated results show that the present approach is quite robust and can provide relatively reasonable results across a wide variety of flow regimes, even for problems involving strong shock wave or shock wave impacting high acoustic impedance mismatch material interface.     

An immersed boundary method for simulation of inviscid compressible flows

In this paper, an immersed boundary method for simulating inviscid compressible flows governed by Euler equations is presented. All the mesh points are classified as interior computed points, immersed boundary points (interior points closest to the solid boundary), and exterior points that are blanked out of computation. The flow variables at an immersed boundary point are determined via the approximate form of solution in the direction normal to the wall boundary. The normal velocity is evaluated by applying the no‐penetration boundary condition, and therefore, the influence of solid wall in the inviscid flow is taken into account. The pressure is computed with the local simplified momentum equation, and the density and the tangential velocity are evaluated by using the constant‐entropy relation and the constant‐total‐enthalpy relation, respectively. With a local coordinate system, the present method has been extended easily to the three‐dimensional case. The present work is the first endeavor to extend the idea of hybrid Cartesian/immersed boundary approach to compressible inviscid flows. The tedious task of handling multi‐valued points can be eliminated, and the overshoot resulting from the extrapolation for the evaluation of flow variables at exterior points can also be avoided. In order to validate the present method, inviscid compressible flows over fixed and moving bodies have been simulated. All the obtained numerical results show good agreement with available data in the literature. Copyright © 2014 John Wiley & Sons, Ltd.     

Discontinuity-capturing finite element computation of unsteady flow with adaptive unstructured mesh

A discontinuity-capturing scheme of finite element method (FEM) is proposed. The unstructured-grid technique combined with a new type of adaptive mesh approach is developed for both compressible and incompressible unsteady flows, which exhibits the capability of capturing the shock waves and/or thin shear layers accurately in an unsteady viscous flow at high Reynolds number. In particular, a new testing variable, i.e., the disturbed kinetic energyE, is suggested and used in the adaptive mesh computation, which is universally applicable to the capturing of both shock waves and shear layers in the inviscid flow and viscous flow at high Reynolds number. Based on several calculated examples, this approach has been proved to be effective and efficient for the calculations of compressible and incompressible flows. The project supported by the National Natural Science Foundation of China (10125210), the Hundred-Talent Programme of the Chinese Academy of Sciences and the Innovation Project of the Chinese Academy of Sciences (KJCX-SW-L04, KJCX2-SW-L2)     

CAD-consistent adaptive refinement using a NURBS-based discontinuous Galerkin method

This study concerns the development of a new method combining high-order computer-aided design (CAD)-consistent grids and adaptive refinement/coarsening strategies for efficient analysis of compressible flows. The proposed approach allows to use geometrical data from CAD without any approximation. Thus, the simulations are based on the exact geometry, even for the coarsest discretizations. Combining this property with a local refinement method allows to start computations using very coarse grids and then relies on dynamic adaption to construct suitable computational domains. The resulting approach facilitates interactions between CAD and computational fluid dynamics solvers and focuses the computational effort on the capture of physical phenomena, since geometry is exactly taken into account. The proposed methodology is based on a discontinuous Galerkin method for compressible Navier-Stokes equations, modified to use nonuniform rational B-Spline representations. Local refinement and coarsening are introduced using intrinsic properties of nonuniform rational B-Spline associated with a local error indicator. A verification of the accuracy of the method is achieved and a set of applications are presented, ranging from viscous subsonic to inviscid trans- and supersonic flow problems.     

Evaluation of adaptive mesh refinement and coarsening for the computation of compressible flows on unstructured meshes

The compressible gas flows of interest to aerospace applications often involve situations where shock and expansion waves are present. Decreasing the characteristic dimension of the computational cells in the vicinity of shock waves improves the quality of the computed flows. This reduction in size may be accomplished by the use of mesh adaption procedures. In this paper an analysis is presented of an adaptive mesh scheme developed for an unstructured mesh finite volume upwind computer code. This scheme is tailored to refine or coarsen the computational mesh where gradients of the flow properties are respectively high or low. The refinement and coarsening procedures are applied to the classical gas dynamic problems of the stabilization of shock waves by solid bodies. In particular, situations where oblique shock waves interact with an expansion fan and where bow shocks arise around solid bodies are considered. The effectiveness of the scheme in reducing the computational time, while increasing the solution accuracy, is assessed. It is shown that the refinement procedure alone leads to a number of computational cells which is 20% larger than when alternate passes of refinement and coarsening are used. Accordingly, a reduction of computational time of the same order of magnitude is obtained. Copyright © 2005 John Wiley & Sons, Ltd.     

Block-based adaptive mesh refinement scheme using numerical density of entropy production for three-dimensional two-fluid flows

In this work, we present a fast and parallel finite volume scheme on unstructured meshes applied to complex fluid flow. The mathematical model is based on a three-dimensional compressible low Mach two-phase flows model, combined with a linearised ‘artificial pressure’ law. This hyperbolic system of conservation laws allows an explicit scheme, improved by a block-based adaptive mesh refinement scheme. Following a previous one-dimensional work, the useful numerical density of entropy production is used as mesh refinement criterion. Moreover, the computational time is preserved using a local time-stepping method. Finally, we show through several test cases the efficiency of the present scheme on two- and three-dimensional dam-break problems over an obstacle.     

Adaptive resolution refinement for pseudospectral simulations of isotropic homogeneous turbulence

Pseudospectral simulations of homogeneous turbulence provide an important class of benchmark flow problems used for fundamental studies of turbulence and for numerical validation purposes. Depending on the numerical resolution, fully resolved computations of homogeneous turbulence can consume large amounts of central processing unit (CPU) time. Here, we present an approach analogous to adaptive mesh refinement for computations performed in physical space to adaptively refine the spectral resolution for pseudospectral computations of isotropic homogeneous turbulent flows. The method is applied to simulations of two-dimensional and three-dimensional isotropic homogeneous turbulence, and the results are compared with direct numerical simulations (DNS) performed using a fixed fine mesh. Significant savings in computational time are found in each case, with little to no compromise in the accuracy of the solutions.     

An hp‐adaptive unstructured finite volume solver for compressible flows

The idea of hp‐adaptation, which has originally been developed for compact schemes (such as finite element methods), suggests an adaptation scheme using a mixture of mesh refinement and order enrichment based on the smoothness of the solution to obtain an accurate solution efficiently. In this paper, we develop an hp‐adaptation framework for unstructured finite volume methods using residual‐based and adjoint‐based error indicators. For the residual‐based error indicator, we use a higher‐order discrete operator to estimate the truncation error, whereas this estimate is weighted by the solution of the discrete adjoint problem for an output of interest to form the adaptation indicator for adjoint‐based adaptations. We perform our adaptation by local subdivision of cells with nonconforming interfaces allowed and local reconstruction of higher‐order polynomials for solution approximations. We present our results for two‐dimensional compressible flow problems including subsonic inviscid, transonic inviscid, and subsonic laminar flow around the NACA 0012 airfoil and also turbulent flow over a flat plate. Our numerical results suggest the efficiency and accuracy advantages of adjoint‐based hp‐adaptations over uniform refinement and also over residual‐based adaptation for flows with and without singularities.     

Mesh adaptation as a tool for certified computational aerodynamics

Mesh convergence order is a key for certification of the accuracy of numerical solutions. A few available results and tools in mesh adaption are synthetized in order to specify a mesh converging method for adaptive calculation of compressible flows including shocks or viscous layers. The main design property for this method is early second‐order convergence, where early means that the second‐order convergence is obtained with coarse meshes. Copyright © 2004 John Wiley & Sons, Ltd.     

Adaptive mesh refinement for simulation of thin film flows

We present a robust and accurate numerical method for simulating gravity-driven, thin-film flow problems. The convection term in the governing equation is treated by a semi-implicit, essentially non-oscillatory scheme. The resulting nonlinear discrete equation is solved using a nonlinear full approximation storage multigrid algorithm with adaptive mesh refinement techniques. A set of representative numerical experiments are presented. We show that the use of adaptive mesh refinement reduces computational time and memory compared to the equivalent uniform mesh results. Our simulation results are consistent with previous experimental observations.     

Validation of adaptive unstructured hexahedral mesh computations of flow around a wind turbine airfoil

In this paper we investigate local adaptive refinement of unstructured hexahedral meshes for computations of the flow around the DU91 wind turbine airfoil. This is a 25% thick airfoil, found at the mid‐span section of a wind turbine blade. Wind turbine applications typically involve unsteady flows due to changes in the angle of attack and to unsteady flow separation at high angles of attack. In order to obtain reasonably accurate results for all these conditions one should use a mesh which is refined in many regions, which is not computationally efficient. Our solution is to apply an automated mesh adaptation technique. In this paper we test an adaptive refinement strategy developed for unstructured hexahedral meshes for steady flow conditions. The automated mesh adaptation is based on local flow sensors for pressure, velocity, density or a combination of these flow variables. This way the mesh is refined only in those regions necessary for high accuracy, retaining computational efficiency. A validation study is performed for two cases: attached flow at an angle of 6° and separated flow at 12°. The results obtained using our adaptive mesh strategy are compared with experimental data and with results obtained with an equally sized non‐adapted mesh. From these computations it can be concluded that for a given computing time, adapted meshes result in solutions closer to the experimental data compared to non‐adapted meshes for attached flow. Finally, we show results for unsteady computations. Copyright © 2005 John Wiley & Sons, Ltd.     

Accurate and robust adaptive mesh refinement for aerodynamic simulation with multi‐block structured curvilinear mesh

A multi‐block curvilinear mesh‐based adaptive mesh refinement (AMR) method is developed to satisfy the competing objectives of improving accuracy and reducing cost. Body‐fitted curvilinear mesh‐based AMR is used to capture flow details of various length scales. A series of efforts are made to guarantee the accuracy and robustness of the AMR system. A physics‐based refinement function is proposed, which is proved to be able to detect both shock wave and vortical flow. The curvilinear mesh is refined with cubic interpolation, which guarantees the aspect ratio and smoothness. Furthermore, to enable its application in complex configurations, a sub‐block‐based refinement strategy is developed to avoid generating invalid mesh, which is the consequence of non‐smooth mesh lines or singular geometry features. A newfound problem of smaller wall distance, which negatively affects the stability and is never reported in the literature, is also discussed in detail, and an improved strategy is proposed. Together with the high‐accuracy numerical scheme, a multi‐block curvilinear mesh‐based AMR system is developed. With a series of test cases, the current method is verified to be accurate and robust and be able to automatically capture the flow details at great cost saving compared with the global refinement. Copyright © 2015 John Wiley & Sons, Ltd.