Unexpectedly Large Couplings Between Orthogonal Units in Anthraquinone Polymers

The unusual electronic properties of directly linked 1,4-polyanthraquinones (14PAQs) are investigated. The dihedral angle between the molecular planes of anthraquinones (AQs) is found to be close to 90°. Contrary to the prevailing notion that the interaction between orthogonal units is negligible due to broken π-electron conjugation, the coupling between neighboring AQ units does not have a minimum at 90° and is much larger than that expected. The unexpectedly large electronic coupling between orthogonal AQ units is explained by the interaction between the lone pairs of the carbonyl oxygen and the π system of the neighboring unit, which allows favorable overlap between frontier molecular orbitals at the orthogonal geometry. It is shown that this effect, which is described computationally for the first time, can be strengthened by adding more quinone units. The effect of thermal fluctuations on the couplings is assessed through ab initio molecular dynamics simulations. The distributions of the couplings reveal that electron transport is resilient to dynamic disorder in all systems considered, whereas the hole couplings are much more sensitive to disorder. Lone pair–π interactions are described, as a previously largely overlooked conjugation mechanism, for incorporation into a new class of disorder-resilient semiconducting redox polymers.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Probing charge transport in pi-stacked fluorene-based systems

The molecular parameters governing charge transport along a pi-stacked fluorene chain in poly(dibenzofulvene) are studied by a joint experimental and theoretical approach involving high-resolution gas-phase photoelectron spectroscopy and quantum-mechanical methods. We specifically investigate the electronic couplings between fluorene moieties as well as the intramolecular reorganization energies, for both holes and electrons. Our results indicate that a pi-stacked fluorene chain favors hole transport over electron transport. The values for electronic couplings and reorganization energies estimated here are compared with those derived recently for pentacene.     

Density functional theory study on electron and hole transport properties of organic pentacene derivatives with electron-withdrawing substituent

Attaching electron-withdrawing substituent to organic conjugated molecules is considered as an effective method to produce n-type and ambipolar transport materials. In this work, we use density functional theory calculations to investigate the electron and hole transport properties of pentacene (PENT) derivatives after substituent and simulate the angular resolution anisotropic mobility for both electron and hole transport. Our results show that adding electron-withdrawing substituents can lower the energy level of lowest unoccupied molecular orbital (LUMO) and increase electron affinity, which are beneficial to the electron injection and ambient stability of the material. Also the LUMO electronic couplings for electron transport in these pentacene derivatives can achieve up to a hundred meV which promises good electron transport mobility, although adding electron-withdrawing groups will introduce the increase of electron transfer reorganization energy. The final results of our angular resolution anisotropic mobility simulations show that the electron mobility of these pentacene derivatives can get to several cm(2) V(-1) s(-1), but it is important to control the orientation of the organic material relative to the device channel to obtain the highest electron mobility. Our investigation provide detailed information to assist in the design of n-type and ambipolar organic electronic materials with high mobility performance.     

Unravelling the Superiority of Nonbenzenoid Acepleiadylene as a Building Block for Organic Semiconducting Materials**

Acepleiadylene (APD), a nonbenzenoid isomer of pyrene, exhibits a unique charge-separated character with a large molecular dipole and a small optical gap. However, APD has never been explored in optoelectronic materials to take advantage of these appealing properties. Here, we employ APD as a building block in organic semiconducting materials for the first time, and unravel the superiority of nonbenzenoid APD in electronic applications. We have synthesized an APD derivative (APD-IID) with APD as the terminal donor moieties and isoindigo (IID) as the acceptor core. Theoretical and experimental investigations reveal that APD-IID has an obvious charge-separated structure and enhanced intermolecular interactions as compared with its pyrene-based isomers. As a result, APD-IID displays significantly higher hole mobilities than those of the pyrene-based counterparts. These results imply the advantages of employing APD in semiconducting materials and great potential of nonbenzenoid polycyclic arenes for optoelectronic applications.     

有机自旋光电子学的基本过程

有机自旋光电子学的研究方向分为磁场效应和自旋注入两个方面.研究表明,外加低磁场能够显著改变非磁性有机半导体材料的光致发光、注入电流、电致发光和光电流.这称为有机半导体材料的磁场效应.近年来,非磁性有机半导体材料的磁场效应引起了广泛的关注和研究兴趣.首先,有机半导体材料的磁场效应是强有力的实验手段,用以研究有机电学、光学和光电器件中电荷传输和激发态中的有用和无用过程,为解决电荷传输和激发态过程中的瓶颈问题提供有效的实验手段,为实现磁-光-电多功能集成提供科学原理,尤其是磁场效应能够为提高能量转换效率、探测和传感光电子学器件的响应频谱范围和灵敏度提供新思路.同时利用磁电极,有机半导体材料和器件中自旋注入及其对电荷传输和激发态过程的调控可以用于发展新型功能化的自旋光电子学器件.本文综述并讨论了有机半导体材料和器件中的磁场效应和自旋注入的光电子学效应.     

Theoretically Rational Designs of Transport Organic Semiconductors Based on Heteroacenes

A Marcus electron transfer theory coupled with an incoherent polaron hopping and charge diffusion model in combining with first‐principle quantum chemistry calculation was applied to investigating the effects of heteroatom on the intermolecular charge transfer rate for a series of heteroacene molecules. The influences of intermolecular packing and charge reorganization energy were discussed. It was found that the sulphur and nitrogen substituted heteroacenes were intrinsically hole‐transporting materials due to the reduced hole reorganization energy and the enhanced overlap between HOMOs. For the oxygen‐substituted heteroacene, it was found that both the electronic couplings and the reorganization energies for holes and electrons were comparative, indicating the application potential of ambipolar devices. Most interestingly, for the boron‐substituted heteroacenes, theoretical calculations predicted a promising electron‐transport material, which is rare for organic materials. These findings provide insights into rationally designing organic semiconductors with specific properties.     

Exciton Transport in Molecular Semiconductor Crystals for Spin-Optoelectronics Paradigm

Organic semiconductors with long-range exciton diffusion length are highly desirable for optoelectronics but currently remain rare. Here, the estimated diffusion length of singlet excitons (L_D) in 2,6-diphenyl anthracene (DPA) crystals grown by solvent evaporation was shown to be up to approximately 124 nm. These crystals showed a previously unseen parallelogram morphology with layer-by-layer edge-on molecular stacking, isotropic optical waveguiding, radiation rate and non-radiation rate constants of 0.15 and 0.26 ns⁻¹ respectively, as well as good field-effect transistor hole mobility and theoretically computed strong electronic couplings as high as 109 meV. Photoresponse experiments revealed that the photoconductivity of DPA crystals is surprisingly not related to the radiative pathway but associated with rapid exciton diffusion to the crystal surface for charge separation and carrier bimolecular recombination. Taken together, DPA was shown to be a promising semiconducting material for a new organic optoelectronics paradigm.     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

Hopping transport in conductive heterocyclic oligomers: reorganization energies and substituent effects

Molecular scale charge motion in disordered organic materials at ambient temperature occurs via a hopping-type mechanism with rates dictated both by the charge transfer integral and by the reorganization energy due to geometric relaxation. This contribution presents a systematic theoretical analysis of cation internal reorganization energies for a broad family of organic oligoheterocycles-variation of reorganization energy with oligomer chain length, heteroatom identity, and a range of heterocycle substituents provides key information on important structural properties governing internal reorganization energies. At room temperature, the range in reorganization energies induced by substituent variations corresponds to a >10(2)-fold variation in intrinsic hole transfer rate, suggesting that changes in reorganization energy dominate variations in charge-transfer rates for many semiconducting/conducting oligomers.     

Organic semiconductors based on small molecules with thermally or photochemically removable groups

Solution processable organic semiconducting small molecules are desirable for the manufacture of low-cost, large-area electronic products on flexible substrates. This article provides an overview of recent progress in OFETs based on solution processable small molecules that can be converted to insoluble organic semiconducting materials on films by thermal or photochemical removal of leaving groups after fabrication of the film.     

Siloxane‐Based Hybrid Semiconducting Polymers Prepared by Fluoride‐Mediated Suzuki Polymerization

Siloxane‐containing materials are a large and important class of organic‐inorganic hybrids. In this report, a practical variation of the Suzuki polymerization to generate semiconducting polymeric hybrids based on siloxane units, which proceeds under essentially nonbasic conditions, is presented. This method generates solution‐processable poly(diketopyrrolopyrrole‐alt‐benzothiadiazole) (PDPPBT‐Si) consisting of the hybrid siloxane substituents, which could not be made using conventional methods. PDPPBT‐Si exhibits excellent ambipolar transistor performance with well‐balanced hole and electron FET mobilities. The siloxane‐containing DPP‐thiophene polymer classes (PDPP3T‐Si and PDPP4T‐Si), synthesized by this method, exhibit high hole mobility of up to 1.29 cm² V^?1 s^?1. This synthetic approach should provide access to a variety of novel siloxane‐containing conjugated semiconductor classes by using a variety of aryldihalides and aryldiboronic acids/esters.     

Semiconducting Polymer Nanobiocatalysts for Photoactivation of Intracellular Redox Reactions

An organic semiconducting polymer nanobiocatalyst (SPNB) composed of a semiconducting polymer core conjugated with microsomal cytochrome P450 (CYP) has been developed for photoactivation of intracellular redox. The core serves as the light‐harvesting unit to initiate photoinduced electron transfer (PET) and facilitate the regeneration of dihydronicotinamide adenine dinucleotide phosphate (NADPH), while CYP is the catalytic center for intracellular redox. Under light irradiation, the semiconducting core can efficiently catalyze the generation of NADPH with a turnover frequency (TOF) 75 times higher than the reported nanosystems, ensuring the supply of the cofactor for intracellular redox. SPNB‐mediated intracellular redox thus can be efficiently activated by light in living cells to convert the model substrate and also to trigger the bioactivation of anticancer drugs. This study provides an organic nanobiocatalytic system that allows light to remotely control intracellular redox in living systems.     

Prediction of remarkable ambipolar charge-transport characteristics in organic mixed-stack charge-transfer crystals

We have used density functional theory calculations and mixed quantum/classical dynamics simulations to study the electronic structure and charge-transport properties of three representative mixed-stack charge-transfer crystals, DBTTF-TCNQ, DMQtT-F(4)TCNQ, and STB-F(4)TCNQ. The compounds are characterized by very small effective masses and modest electron-phonon couplings for both holes and electrons. The hole and electron transport characteristics are found to be very similar along the stacking directions; for example, in the DMQtT-F(4)TCNQ crystal, the hole and electron effective masses are as small as 0.20 and 0.26 m(0), respectively. This similarity arises from the fact that the electronic couplings of both hole and electron are controlled by the same superexchange mechanism. Remarkable ambipolar charge-transport properties are predicted for all three crystals. Our calculations thus provide strong indications that mixed-stack donor-acceptor materials represent a class of systems with high potential in organic electronics.     

Synthesis, characterization, and transistor and solar cell applications of a naphthobisthiadiazole-based semiconducting polymer

We report the synthesis and characterization of a novel donor-acceptor semiconducting polymer bearing naphthobisthiadiazole (NTz), a doubly benzothiadiazole (BTz)-fused ring, and its applications to organic field-effect transistors and bulk heterojunction solar cells. With NTz's highly π-extended structure and strong electron affinity, the NTz-based polymer (PNTz4T) affords a smaller bandgap and a deeper HOMO level than the BTz-based polymer (PBTz4T). PNTz4T exhibits not only high field-effect mobilities of ~0.56 cm(2)/(V s) but also high photovoltaic properties with power conversion efficiencies of ~6.3%, both of which are significantly high compared to those for PBTz4T. This is most likely due to the more suitable electronic properties and, importantly, the more highly ordered structure of PNTz4T in the thin film than that of PBTz4T, which might originate in the different symmetry between the cores. NTz, with centrosymmetry, can lead to a more linear backbone in the present polymer system than BTz with axisymmetry, which might be favorable for better molecular ordering. These results demonstrate great promise for using NTz as a bulding unit for high-performance semiconducting polymers for both transistors and solar cells.     

Crystallization and Organic Field-Effect Transistor Performance of a Hydrogen-Bonded Quaterthiophene

Crystalline thin films of π-conjugated molecules are relevant as the active layers in organic electronic devices. Therefore, materials with enhanced control over the supramolecular arrangement, crystallinity, and thin-film morphology are desirable. Herein, it is reported that hydrogen-bonded substituents serve as additional structure-directing elements that positively affect crystallization, thin-film morphology, and device performance of p-type organic semiconductors. It is observed that a quaterthiophene diacetamide exhibits a denser packing than that of other quaterthiophenes in the single-crystal structure and, as a result, displays enhanced intermolecular electronic interactions. This feature was preserved in crystalline thin films that exhibited a layer-by-layer morphology, with large domain sizes and high internal order. As a result, organic field-effect transistors of these polycrystalline thin films showed mobilities in the range of the best mobility values reported for single-crystalline quaterthiophenes. The use of hydrogen-bonded groups may, thus, provide an avenue for organic semiconducting materials with improved morphology and performance.     

Elaboration of nanohybrid materials by photopolymerisation of 3,4-ethylenedioxythiophene on TiO2

A method for the elaboration of a heterojunction composed on n-type inorganic semiconducting nanoparticles, TiO(2), and a p-type organic semiconducting polymer poly(3,4-ethylene dioxythiophene) by UV illumination is described.     

Electronic couplings and on-site energies for hole transfer in DNA: systematic quantum mechanical/molecular dynamic study

The electron hole transfer (HT) properties of DNA are substantially affected by thermal fluctuations of the pi stack structure. Depending on the mutual position of neighboring nucleobases, electronic coupling V may change by several orders of magnitude. In the present paper, we report the results of systematic QM/molecular dynamic (MD) calculations of the electronic couplings and on-site energies for the hole transfer. Based on 15 ns MD trajectories for several DNA oligomers, we calculate the average coupling squares V(2) and the energies of basepair triplets XG(+)Y and XA(+)Y, where X, Y=G, A, T, and C. For each of the 32 systems, 15,000 conformations separated by 1 ps are considered. The three-state generalized Mulliken-Hush method is used to derive electronic couplings for HT between neighboring basepairs. The adiabatic energies and dipole moment matrix elements are computed within the INDO/S method. We compare the rms values of V with the couplings estimated for the idealized B-DNA structure and show that in several important cases the couplings calculated for the idealized B-DNA structure are considerably underestimated. The rms values for intrastrand couplings G-G, A-A, G-A, and A-G are found to be similar, approximately 0.07 eV, while the interstrand couplings are quite different. The energies of hole states G(+) and A(+) in the stack depend on the nature of the neighboring pairs. The XG(+)Y are by 0.5 eV more stable than XA(+)Y. The thermal fluctuations of the DNA structure facilitate the HT process from guanine to adenine. The tabulated couplings and on-site energies can be used as reference parameters in theoretical and computational studies of HT processes in DNA.     

Intermarriage of Halide Perovskites and Metal-Organic Framework Crystals

This Review examines how the intermarriage of perovskite and metal-organic framework crystals brings new paradigms for material design and functionality. The strategic combination of halide perovskites and metal–organic frameworks (MOFs) has generated a new family of porous composite materials that will enable new applications, including optoelectronic, catalysis, sensing, and data encryption. This Review surveys the current progress of this exciting new area. Fundamental aspects, including perovskite nucleation and growth, heterojunction electron–hole transfer, electronic structure, and luminescence within confined spaces, are highlighted, with suggestions of approaches by which guest confinement within MOFs can be synthetically designed. We further address the underlying principles and discuss the new insights and tools for the manipulation of these composite materials for the development of synthetic microporous semiconducting composites, as well as new strategies for host–guest interfacial engineering.