Elasticity and plasticity of two-dimensional amorphous solid layers of β-lactoglobulin

We investigate the mechanical properties of a two-dimensional amorphous solid. It is formed spontaneously by the adsorption of a protein (the β-lactoglobulin) at the surface of water. We measure its mechanical response in both elastic and plastic regimes by applying a point-like force (using a glass fiber). We compare our results with previous measurements of shear moduli using a floating torsion device. Received: 10 February 2003 / Accepted: 23 April 2003 / Published online: 27 May 2003 RID="a" ID="a"Present address: Cavendish Laboratory, Madingley Road, Cambridge, CB3 0HE, UK; e-mail: sc374@phy.cam.ac.uk RID="b" ID="b"e-mail: graner@ujf-grenoble.fr     

Formation of adhesive contacts: Spreading versus dewetting

A soft bead (radius R _b) is pressed with a force F against a hydrophobic glass plate through a water drop (“wet” JKR set-up). We observe with a fast camera the growth of the contact zone bridging the rubber bead to the glass. Depending on the approach velocity V, two regimes are observed : i) at large V a liquid film is squeezed at the interface and dewets by nucleation and growth of a dry contact; ii) at low velocities, the bead remains nearly spherical. As it comes into contact, the rubber bead spreads on the glass with a characteristic time (in the range of one millisecond) τ ≈ ηR _b ²/F, where η is the liquid viscosity. The laws of spreading are interpreted by a balance of global mechanical and viscous forces. Received: 22 December 2002 / Accepted: 24 March 2003 / Published online: 29 April 2003 RID="a" ID="a"e-mail: brochard@curie.fr     

Vesicles in haptotaxis with hydrodynamical dissipation

We analyze the problem of vesicle migration in haptotaxis (a motion directed by an adhesion gradient), though most of the reasoning applies to chemotaxis as well as to a variety of driving forces. A brief account has been published on this topic [#!Cantat99a!#]. We present an extensive analysis of this problem and provide a basic discussion of most of the relevant processes of migration. The problem allows for an arbitrary shape evolution which is compatible with the full hydrodynamical flow in the Stokes limit. The problem is solved within the boundary integral formulation based on the Oseen tensor. For the sake of simplicity we confine ourselves to 2D flows in the numerical analysis. There are basically two regimes (i) the tense regime where the vesicle behaves as a “droplet” with an effective contact angle. In that case the migration velocity is given by the Stokes law. (ii) The flask regime where the vesicle has a significant (on the scale of the vesicle size) contact curvature. In that case we obtain a new migration law which substantially differs from the Stokes law. We develop general arguments in order to extract analytical laws of migration. These are in good agreement with the full numerical analysis. Finally we mention several important future issues and open questions. Received 24 June 2002 and Received in final form 4 February 2003 Published online: 16 April 2003 RID="a" ID="a"e-mail: isabelle.cantat@univ-rennes1.fr     

X-ray reflectivity of solid-supported, multilamellar membranes

We have investigated the structure of solid-supported, multilamellar membranes by X-ray reflectivity. The density profile is obtained by fitting the full q-range to a model using the bilayer Fourier coefficients as fitting parameters. The effect of hydration and the substrate boundary condition are discussed in view of the well-known Landau-Peierls effect and its implications for structure determination. The resulting bilayer density profile agrees remarkably well with previously published data of a molecular dynamics (MD) simulation for 1,2-oleoyl-palmitoyl-sn-glycero-3-phosphocholine (OPPC). Received 1 October 2001 and Received in final form 21 December 2001     

The interplay between surface micro-topography and -mechanics of type I collagen fibrils in air and aqueous media: An atomic force microscopy study

Calf skin type I collagen fibrils were regenerated from acidic solution and imaged with contact mode atomic force microscopy in air, water, and buffer solution. When imaged in air at a contact force of 20-150 nN, collagen fibrils exhibited a distinct transverse banding pattern with a period of 65 nm, consisting of high ridges and shallow grooves. The force dependence of the images suggests that such banding pattern is attributed to the transverse contraction of the fibril upon dehydration during sample preparation, which reflects the tangential mass density across the fibril. Imaging in water and phosphate buffer solution at a contact force of 15-80 nN revealed hydrated collagen fibrils with smooth surfaces. The rigidity of the collagen fibrils decreased considerably upon hydration. Scanning the cantilever tip in an aqueous medium at a contact force of 90-280 nN enabled us to probe subunit arrangement in the bulk region of the collagen fibril. The results indicate that the molecular assembly in the hydrated fibril is akin to that in the intact form. The image resolution was improved by stabilizing the collagen molecules through crosslinking with glutaraldehyde, which served to resolve microfibril-like structure on the fibril surface. Received 28 March 2000 and Received in final form 15 June 2001     

Film thickness effects on the distribution of high-molecular-weight heterotelechelic polymers

High-molecular-weight heterotelechelic deuteriopolystyrene, NDPSF, possessing an amine functional group at one end of the chain and a fluorocarbon group at the other was tethered to a silicon substrate by its amine functional group. These layers were coated with an unfunctionalised polystyrene matrix, HPS, such that the total film thickness covered a range from 2.2 to 9 times the radius of gyration of NDPSF. The detailed distribution of the polymers after annealing for times much greater than the reptation period of either of the components, was obtained using neutron reflectometry. No evidence for bridging of the two interfaces was found for the thicker films, but the finite concentration of the NDPSF polymer observed for the thinnest films may be due to bridging since the energy gain of the fluorocarbon end is just greater than the loss due to configurational entropy losses. A linear increase in the ellipsometric thickness of the excess of NDPSF at the substrate was discovered and we attribute this to the NDPSF slowly being leached out of the layer initially at the substrate followed by diffusion into the bulk of the film. The concentration profiles obtained are consistent with hindered relaxation of the large NDPSF molecules, when they are tethered at the substrate or at the vacuum surface. Received 21 August 2001 and Received in final form 7 January 2002     

Radioactive ions for solid-state investigations at magnetic surfaces and interfaces

Hyperfine interactions observed at isomeric states of radioactive probe nuclei are used as a tool for solid-state investigations. This method is sensitive to atomic-scale properties. In recent years surface and interface investigations using radioactive probes delivered many results which can hardly be achieved by any other method. Several groups, e.g., from Konstanz, Leuven, Groningen, Aarhus, Uppsala, Tel Aviv, Pennsylvania, contributed to this field. Our group studies magnetic properties at surfaces and interfaces performing perturbed angular correlation (PAC) measurements in the UHV chamber ASPIC (Apparatus for Surface Physics and Interfaces at CERN). We take advantage of the enhanced variety of PAC probes delivered by the on-line mass separator ISOLDE. First, we report on measurements of magnetic hyperfine fields ( B _hf) at Se adatoms on a ferromagnetic substrate using ⁷⁷Se as a PAC probe. The investigation of induced magnetic interactions in nonmagnetic materials is a further subject of our studies. Here the nonmagnetic 4d element Pd is investigated, when it is in contact with ferromagnetic nickel. An outlook will be given on studies to be done in the future. The experiments were performed at the HMI, Berlin, and at CERN, Geneva. Received: 1 May 2001 / Accepted: 4 December 2001     

Spatial variations of the mean and statistical quantities in the thermal boundary layers of turbulent convection

We have studied the dynamics of the contact line of a viscous liquid on a solid substrate with macroscopic random defects. We have first characterized the friction force f₀ at microscopic scale for a substrate without defects; f₀ is found to be a strongly nonlinear function of the velocity U of the contact line. In presence of macroscopic defects, we find that the applied force F(U) is simply shifted with respect to f₀(U) by a constant: we do not observe any critical behavior at the depinning transition. The only observable effect of the substrate disorder is to increase the hysteresis. We have also performed realistic numerical simulation of the motion of the contact line. Using the same values of the parameters as in the experiment, we find that the experimental data is qualitatively well reproduced. In light of experimental and numerical results, we discuss the possibility of measuring a true critical behavior.Received: 6 October 2003, Published online: 19 February 2004PACS: 46.65. + g Random phenomena and media - 64.60.Ht Dynamic critical phenomena - 68.08.Bc Wetting     

Vertical water distribution during the drying of polymer films cast from aqueous emulsions

We present a systematic study of the vertical uniformity of water distribution during the drying of waterborne colloidal films, testing the predictions of a Peclet number Pe defined for this system. Pe indicates the relative contributions of water evaporation and Brownian diffusion in determining the concentration profile in the vertical direction (i.e. normal to the substrate). When Pe < 1, the water concentration in films cast from an alkyd emulsion is found via magnetic-resonance profiling to be uniform with depth, which is consistent with expectations. When Pe > 1, a gradient in the water concentration develops, with less water near the interface with air. The water profiles reveal that the alkyd particles do not coalesce immediately upon contact in close-packing. At later times, a concentrated surface layer develops, but particles are not coalesced in this layer to form a continuous “skin”, but rather the structure is likely to be that of a biliquid foam. Received 20 March 2002 and Received in final form 12 June 2002     

Polymers grafted to a fluid and flexible membrane: Extreme sensitivity to the grafting density

Equilibrium phase coexistence between two chemical species implies the equality of the chemical potentials and of the osmotic pressures. We study this problem on a deformable membrane when one type of the molecules serves as anchor for polymeric chains immersed in the surrounding medium (considered as a good solvent). We derive the general conditions for phase coexistence when both the curvature of the membrane and the density field of the anchor molecule are free to adjust themselves. We show that curvature favors phase segregation. Our model predicts that membranes decorated with polymeric chains exhibit new shape bifurcations without equivalent in fixed density systems. Received: 26 November 2002 / Accepted: 2 April 2003 / Published online: 12 May 2003 RID="a" ID="a"e-mail: nicolas@drfmc.ceng.cea.fr RID="b" ID="b"e-mail: bfourcade@cea.fr     

Dynamics of supercooled confined water measured by deep inelastic neutron scattering

In this paper, we present the results of deep inelastic neutron scattering (DINS) measurements on supercooled water confined within the pores (average pore diameter ~ 20 Å) of a disordered hydrophilic silica matrix obtained through hydrolysis and polycondensation of the alkoxide precursor Tetra-Methyl-Ortho-Silicate via the sol-gel method. Experiments were performed at two temperatures (250 K and 210 K, i.e., before and after the putative liquid–liquid transition of supercooled confined water) on a “wet” sample with hydration h ~ 40% w/w, which is high enough to have water-filled pores but low enough to avoid water crystallization. A virtually “dry” sample at h ~ 7% was also investigated to measure the contribution of the silica matrix to the neutron scattering signal. As is well known, DINS measurements allow the determination of the mean kinetic energy and the momentum distribution of the hydrogen atoms in the system and therefore, allow researchers to probe the local structure of supercooled confined water. The main result obtained is that at 210 K the hydrogen mean kinetic energy is equal or even slightly higher than at 250 K. This is at odds with the predictions of a semiempirical harmonic model recently proposed to describe the temperature dependence of the kinetic energy of hydrogen in water. This is a new and very interesting result, which suggests that at 210 K, the water hydrogens experience a stiffer intermolecular potential than at 250 K. This is in agreement with the liquid–liquid transition hypothesis.     

Flow birefringence,stress optical rule and rheology of four micellar solutions with the same low shear viscosity

The flow birefringence and the rheological properties of four viscoelastic solutions having nearly the same zero shear viscosity and subjected to shear flows are investigated in the linear and non-linear domains. The surfactant used for the samples is the cetyltrimethylammonium chloride in water at the concentration of 100 mmol/l with an organic salt, the sodium salicylate. The low shear viscosity curve versus the salt concentration is non-monotonic and has two maxima separated by a minimum forming four domains in which the salt concentration is chosen. For the two solutions belonging to the inner branch, i.e. between the two maxima, a simple Maxwellian behaviour is observed and shear banding occurs as confirmed by the flow birefringence pictures. Contrary to the results of P. Fisher (1996) where the unstable flow regime is restricted to the first decreasing part of the low shear viscosity curve of a cetylpyridinium chloride solution, we show that shear banding exits in a wider domain of the salt concentration. Received 18 November 2002 / Published online: 1 April 2003 RID="a" ID="a"e-mail: Decruppe@lpli.sciences.univ-metz.fr     

Coexistence of color superconductivity and chiral symmetry breaking within the NJL model

The phase diagram for quark matter is investigated within a simple Nambu-Jona-Lasinio model without vector correlations. It is found that the phase structure in the temperature-density plane depends sensitively on the parametrization of the model. We present two schemes of parametrization of the model where, within the first one, a first-order phase transition from a phase with broken chiral symmetry to a color superconducting phase for temperatures below the triple point at T _t = 55 MeV occurs, whereas for the second one a second-order phase transition for temperatures below T _t = 7 MeV is found. In the latter case, there is also a coexistence phase of broken chiral symmetry with color superconductivity, which is a new finding within this class of models. Possible consequences for the phenomenology of the QCD phase transition at high baryon densities are discussed. Received: 3 January 2003 / Accepted: 21 February 2003 / Published online: 24 April 2003     

Renormalized tricritical behaviour for wetting transitions

In this paper we study tricritical wetting behaviour in three dimensions. In particular we concentrate on systems with short-ranged forces and apply linear functional renormalization group techniques to elucidate the effect of fluctuations upon tricriticality. In comparison with studies of critical wetting we identify an additional fluctuation regime which is relevant for values of the capillary parameter between 2/9 and 1/2. We demonstrate that this regime essentially provides a crossover from mean-field like behaviour, in which tricritical exponents are always distinct from their critical counterparts, from intermediate- and strong-fluctuation behaviour where the critical exponents for tricritical and critical wetting are found to always coincide. We conclude by discussing briefly the possible relevance of these results for experimental studies of wetting. Received 4 January 2001 and Received in final form 11 May 2001     

Hydration of nucleic acid components in dependence on nucleotide composition and relative humidity: a Monte Carlo simulation

What role does the nucleotide composition play in the process of formation of hydrated environment of nucleic acids? Can one estimate the hydration of nucleic acids on the level of their components? In order to resolve these questions we have completed an extensive computer simulation of the hydration of nucleic acids components - deoxynucleoside monophosphates distinguished by nucleotide composition. The energetic characteristics of systems containing deoxynucleoside monophosphates and water clusters of various dimensions are received. Our results demonstrate that deoxynucleoside monophosphates containing guanine and/or cytosine residues hydrated more strongly because of formation of more hydrogen bonds with water molecules in small water clusters, i.e. at low values of relative humidity. With increasing of number of water molecules in a water cluster the energetic preference of deoxynucleoside monophosphates containing guanine and/or cytosine residues decreases, and for water clusters corresponding to a state of a dilute aqueous solution the hydration of all types of deoxynucleoside monophosphates does not differ in a great degree. Deoxynucleoside monophosphates containing guanine and/or cytosine residues cause the greater destruction of the water structure compensated by the greater interaction with the nearest water molecules for all levels of relative humidity. Received 25 December 2001 and Received in final form 22 March 2002 Published online 13 September 2002     

Some relevant parameters affecting the glass transition of supported ultra-thin polymer films

We have measured, the thickness dependence of the glass transition temperature T(g)( h), using ellipsometry at variable temperature, for poly(methyl-methacrylate) (PMMA) of various tacticity in confined geometry. We report that several factors significantly affect T(g)( h): i) polymer microstructure (stereoregularity of PMMA) related to local dynamics; ii) interfacial interactions; iii) conformation of the polymer chains. These results raise many fundamental questions on the origin of the thickness-dependent glass transition. Why and how do the interactions with the substrate significantly affect T(g)( h)? Does T(g)( h) depend on the modifications of conformational parameters of the chains (their entropy)? What is the correlation between local dynamics and T(g)( h) in thin films? The aim of this paper is to summarise these open questions, which should stimulate further investigations in the thin polymer film scientific community.     

Self-healing slip pulses and the friction of gelatin gels

We present an extensive experimental study and scaling analysis of friction of gelatin gels on glass. At low driving velocities, sliding occurs via propagation of periodic self-healing slip pulses whose velocity is limited by collective diffusion of the gel network. Healing can be attributed to a frictional instability occurring at the slip velocity V = V _c. For V > V _c, sliding is homogeneous and friction is ruled by the shear-thinning rheology of an interfacial layer of thickness of order the (nanometric) mesh size, containing a solution of polymer chain ends hanging from the network. In spite of its high degree of confinement, the rheology of this system does not differ qualitatively from known bulk ones. The observed ageing of the static friction threshold reveals the slow increase of adhesive bonding between chain ends and glass. Such structural ageing is compatible with the existence of a velocity-weakening regime at velocities smaller than V _c, hence with the existence of the healing instability. Received: 7 March 2003 / Accepted: 2 May 2003 / Published online: 11 June 2003 RID="b" ID="b"e-mail: ronsin@gps.jussieu.fr     

Nonlinear dynamics of dimers on periodic substrates

We study the dynamics of a dimer moving on a periodic one-dimensional substrate as a function of the initial kinetic energy at zero temperature. The aim is to describe, in a simplified picture, the microscopic dynamics of diatomic molecules on periodic surfaces, which is of importance for thin film formation and crystal growth. We find a complex behaviour, characterized by a variety of dynamical regimes, namely oscillatory, “quasi-diffusive” (chaotic) and drift motion. Parametrically resonant excitations of internal vibrations can be induced both by oscillatory and drift motion of the centre of mass. For weakly bound dimers a chaotic regime is found for a whole range of velocities between two non-chaotic phases at low and high kinetic energy. The chaotic features have been monitored by studying the Lyapunov exponents and the power spectra. Moreover, for a short-range interaction, the dimer can dissociate due to the parametric excitation of the internal motion. Received 8 July 2002 / Received in final form 15 November 2002 Published online 27 January 2003 RID="a" ID="a"e-mail: fusco@sci.kun.nl.     

Control of amphiphilic block copolymer morphologies using solution conditions

It is well known that the morphology of block copolymer aggregates depends on polymer properties such as the molecular weight, the relative block length, and the chemical nature of the repeat unit. Recently, we have shown that if aggregates are allowed to self-assemble in solution, then in addition to the above factors, a high degree of control over the aggregate architecture can be achieved by adjusting the solution conditions. Factors such as the water content in the solvent mixture, the solvent nature and composition, the presence of additives (ions, surfactants, and homopolymer) and the polymer concentration were successfully employed to control the aggregate shape and size. In this paper, we review a series of studies performed in our group to show how solution properties can control the architecture of aggregates prepared from a given copolymer. The control mechanism is explained in terms of the effect of each property on the forces that govern the formation of any given morphology, namely the core-chain stretching, corona-chain repulsion and interfacial tension. Received 30 April 2002 and Received in final form 3 September 2002 Published online: 21 January 2003     

Distribution of local entropy in the Hilbert space of bi-partite quantum systems: origin of Jaynes' principle

For a closed bi-partite quantum system partitioned into system proper and environment we interpret the microcanonical and the canonical condition as constraints for the interaction between those two subsystems. In both cases the possible pure-state trajectories are confined to certain regions in Hilbert space. We show that in a properly defined thermodynamical limit almost all states within those accessible regions represent states of some maximum local entropy. For the microcanonical condition this dominant state still depends on the initial state; for the canonical condition it coincides with that defined by Jaynes' principle. It is these states which thermodynamical systems should generically evolve into. Received 13 June 2002 / Received in final form 14 November 2002 Published online 4 February 2003 RID="a" ID="a"e-mail: jochen@theol.physik.uni-stuttgart.de