Theoretical performance of novel multipliers at millimeter and submillimeter wavelengths

A theoretical comparison of various low and high order multipliers for 200 GHz and 1 THz has been carried out. Novel diodes including single barrier varactors, barrier-intrinsic-n⁺ diodes and high electron mobility varactors are shown to have excellent theoretical performance, comparable or better than the conventional Schottky varactors for single and double diode frequency multipliers at millimeter and submillimeter wavelengths, whereas quantum well diodes, since they suffer from high resistive losses, are shown to be less attractive. In comparison to the conventional Schottky varactor, these new diodes have some potential advantages in their characteristics such as nonlinearity or a special symmetry. For future optimization some general comments on these advantages as well as other factors affecting multiplication is given.     

A low noise receiver for millimeter and submillimeter wavelengths

A broadband, low noise heterodyne receiver, suitable for astronomical use, has been built using a Pb alloy superconducting tunnel junction (SIS). The RF coupling is quasioptical via a bowtie antenna on a quartz lens and is accomplished without any tuning elements. In this preliminary version the double sideband receiver noise temperature rises from 205 K at 116 GHz to 375 K at 349 Ghz, and to 815 K at 466 GHz. This is the most versatile and sensitive receiver yet reported for sub-mm wavelengths.     

Method for radar cross section measurements in millimeter and submillimeter wave regions

We present a new method for electromagnetic modeling radar scattering processes. In this method we use a quasi-optical waveguide of the type of "hollow dielectric waveguide" as a fundamental component of radar cross section (RCS) instrumentation systems. Such waveguide structure produces required target-illuminating quasiplane wave and suppresses unwanted waves as well as transmits the legitimate signal from test object, mounted inside this waveguide, to the reception zone. Presented method is especially effective one in millimeter and submillimeter wave regions, in particular, for investigation RCS of targets with small reflectivity.     

Reflectance characteristics in the submillimeter and millimeter wavelength region of a vacuum compatible absorber

The reflectance characteristics of a grooved sample of Corning Macor, a glass ceramic, were studied in the range 60–1100 GHz for incident and reflected angles ranging from 10° to 65°. Measurements indicate a low, <1%, reflectance for near normal angles of incidence, where the angles of incidence and reflection are defined with respect to a direction normal to the sample face as if it were a planar surface. Higher values, up to 6%, were obtained for other angles of incidence and these results depend upon the orientation of the sample grooves with respect to the polarization of the electric field of the incoming radiation. Structure in the spectra indicates complex interference effects in some configurations.     

An efficient Schottky-varactor frequency multiplier at millimeter waves. Part IV. Quintupler

The multiplication efficiency of a millimeter-wave Schottky-varactor quintupler with fixed idler terminations was studied. The highest efficiency measured was 4.2% at 168 GHz with 10 mW input power and 3.3% with 40 mW input power. Over the range from 165 GHz to 170 GHz the output power was 0.7–1.3 mW withp _in =40 mW.     

An efficient Schottky-varactor frequency multiplier at millimeter waves. Part III. Quadrupler

In this research the efficiency of a millimeter-wave Schottky-varactor quadrupler was studied. Theoretical simulations were carried out by using a nonlinear analysis program to find the optimum embedding impedances for a given diode. Emphasis was placed on the study of optimum idlers at the 2nd and 3rd harmonics, which are essential for a high quadrupling efficiency. For experimental verification a quadrupler for 140–155 GHz output frequency range with fixed idler terminations was constructed. This quadrupler was tested with different output configurations. A 10% tunable bandwidth was obtained with output power in the range of 1.5–2.7 mW whenP _in =40 mW. The highest efficiency measured was 11.3% at 148 GHz with 10 mW input power.     

Resonance phenomena in the magnetized semiconductor plasma and their application for the design of the millimeter and submillimeter wave components

A review of physical principles of design as well as some ways of technical realization of controlled resonance semiconductor devices at millimeter and submillimeter wavelengths is presented. The operation of such devices is based on cyclotron and magnetoplasma resonances as well as on Fabry-Perot resonance. Such choice has been made due to the fact that these resonance phenomena are the most typical ones for the magnetized semiconductor plasma.     

Untuned resonators for near millimeter waves

A brief account is given of the reasons for revitalizing an old technique for near millimeter wave measurements. The principles of the method are outlined and the scope of its application indicated. The potential importance of the technique for liquid phase and biological material studies is illustrated.     

Phased array for millimeter wave frequencies

A phased array is presented at a frequency of 70 GHz, consisting of a corporate feed, ferrite phase shifters and dielectric rod antennas. Metal waveguides were utilized to construct the feed network, whereas a special dielectric waveguide structure was employed for the ferrite phase shifter and dielectric rod antenna. Beam scanning can be performed electronically controlled in the horizontal plane.     

Classical φ6-field theory in (1+1) dimensions. A model for structural phase transitions

The classical φ⁶-field theory in (1+1) dimensions, is considered as a model for the first order structural phase transitions. The equation of motion is solved exactly; and the presence of domain wall (kink) solutions at and below the transition point, in addition to the usual phonon-like oscillatory solutions, is demonstrated. The domain wall solutions are shown to be stable, and their mass and energies are calculated. Above the transition point there exists exotic unstable kink-like solutions which takes the particle from one hill top to the other of the potential. The partition function of the system is calculated exactly using the functional integral method together with the transfer matrix techniques which necessitates the determination of the eigenvalues of a Schrödinger-like equation. Thus the exact free energy is evaluated which in the low temperature limit has a phonon part and a contribution coming from the domain wall excitations. It was shown that this domain wall free energy differs from that calculated by the use of the domain wall phenomenology proposed by Krumhansl and Schrieffer. The exact solutions of the Schrödinger-like equation are also used to evaluate the displacement-displacement, intensity-intensity correlation functions and the probability distribution function. These results are compared with those obtained from the phenomenology as well as the φ⁴-field theory. A qualitative picture of the central peak observed in structural phase transitions is proposed.     

Low energy scattering data and phase shifts

We point out that at any given low energyσ _tot and a ratio of integrated scattering data likeF/B can, in principle, be used unambiguously to finds-andp-wave phase shifts. Thus efforts to obtain other low energy data like elastic dσ/dΩ andP/E are unnecessary. It is also indicated that the mere knowledge whetherF/B is greater than or less than unity enables us to draw important conclusions about the nature of the interaction in thep-state without performing detailed calculations. Thus a strong case is made out for obtaining much more preciseF/B data than are presently available. The discussion refers mainly to low energy ∧p scattering data.     

Dynamic holograms and phase conjugation in multilevel resonant media

The generation of dynamic holograms and four-wave phase conjugation in resonant media has been investigated under conditions of interaction between radiation and excited singlet and triplet states. Two mechanisms of optical control of resonant media non-linearities using independent pump-up to increase the diffraction efficiency of dynamic holograms have been considered. The peculiarities of non-linear recording of holograms, and a variant of quadratic recording, have been investigated. The dependence of the efficiency of diffraction by dynamic holograms on the intensity of interacting waves and the spectroscopic characteristics of the medium has been analysed.     

Positron annihilation study for cadmium (electronic structure and enhancement effect)

The three dimensional electron density in momentum space ρ(p) and in wave vector space n(k) was reconstructed for cadmium (Cd). The measurements were performed using the two dimensional angular correlation of annihilation radiation (2D-ACAR) technique. Enhanced contributions in the spectra were observed around 5.5 mrad, discussed in terms of a Kahana-like enhancement effect. From another viewpoint, Fermi radii were analyzed in the (λM K), (ALM) and (AHK) planes, and they showed a maximum deviation of about 4% from the free electron Fermi radius. Moreover, comparisons to a radio-frequency size effect (RFSE) experiment and theoretical band structure calculations (using augmented plane wave (APW), linear combination of atomic orbital (LCAO) and linear muffin tin orbital (LMTO) methods) were examined. The results showed a qualitative agreement with both APW and LCAO calculations. However, a favorable agreement with the APW method was determined via Fermi surface dimensions. The differences of bands' occupation of n(k) between the current work and the APW method were argued in view of positron wave function in Cd.     

Co(S1-xSex)2系统中的铁磁量子相变

针对Co(S_1-xSe_x)₂系统在x=0.11附近发生的铁磁金属到顺磁金属相变,制备了一系列不同Se替代浓度的多晶样品.通过对其结构和电阻率-温度ρ(T)关系的系统观测,结果发现,样品铁磁相变温度T_C随着Se替代浓度x值的增加,以(1-x)^1/2关系单调下降,其二级铁磁相变转变为一级相变 关键词： 量子相变 自旋量子涨落 1-xSe_x)₂')" href="#">Co(S_1-xSe_x)₂     

Theoretical investigation of the electronic structure of a ferroelectric SbSI cluster at a phase transition

This paper presents the theoretical investigation of energy levels of valence bands (VB) and core levels (CL) of the ferroelectric SbSl single crystals in antiferroelectric and ferroelectric phases. Since the best approximation for the deep VB levels is a calculation by the Hartree-Fock method, the molecular model of a SbSI crystal was used for calculations. This model of the crystal was also used for calculations of the total density of states. It was found that the VB and CL of this ferroelectric semiconductor are sensitive to the small lattice distortion at the phase transition, and that an average of the total density of states, when all atoms participate in oscillations of all normal modes, are more similar to the experimental X-ray photoelectron spectra (XPS). The experimental splitting of CL obtained by XPS was compared with the theoretically calculated one by two different methods. The cluster model calculations showed that the splitting of the CL in SbSI might be caused by photoelectron emission from the atoms, which have different valence state, at the surface.     

Implementation of quantum controlled phase gate and preparation of multiparticle entanglement in cavity QED

Schemes are presented for realizing quantum controlled phase gate and preparing an N-qubit W-like state, which are based on the large-detuned interaction among three-state atoms, dual-mode cavity and a classical pulse. In particular, a class of W states that can be used for perfect teleportation and superdense coding is generated by only one step. Compared with the previous schemes, cavity decay is largely suppressed because the cavity is only virtually excited and always in the vacuum state and the atomic spontaneous emission is strongly restrained due to a large atom-field detuning.