Well‐defined poly[(dimethylamimo)ethyl methacrylate]‐b‐poly(fluoroalkyl methacrylate) diblock copolymers: Effects of different fluoroalkyl groups on the solution properties

A series of well‐defined, fluorinated diblock copolymers, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,2‐trifluoroethyl methacrylate) (PDMA‐b‐PTFMA), poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,3,4,4,4‐hexafluorobutyl methacrylate) (PDMA‐b‐PHFMA), and poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate) (PDMA‐b‐POFMA), have been synthesized successfully via oxyanion‐initiated polymerization. Potassium benzyl alcoholate (BzO^?K⁺) was used to initiate DMA monomer to yield the first block PDMA. If not quenched, the first living chain could be subsequently used to initiate a feed F‐monomer (such as TFMA, HFMA, or OFMA) to produce diblock copolymers containing different poly(fluoroalkyl methacrylate) moieties. The composition and chemical structure of these fluorinated copolymers were confirmed by ¹H NMR, ¹⁹F NMR spectroscopy, and gel permeation chromatography (GPC) techniques. The solution behaviors of these copolymers containing (tri‐, hexa‐, or octa‐ F‐atom)FMA were investigated by the measurements of surface tension, dynamic light scattering (DLS), and UV spectrophotometer. The results indicate that these fluorinated copolymers possess relatively high surface activity, especially at neutral media. Moreover, the DLS and UV measurements showed that these fluorinated diblock copolymers possess distinct pH/temperature‐responsive properties, depending not only on the PDMA segment but also on the fluoroalkyl structure of the FMA units. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2702–2712, 2009     

Comparison of the adsorption of cationic diblock copolymer micelles from aqueous solution onto mica and silica

The similarities and differences in the adsorption behavior of diblock poly(2-(dimethylamino)ethyl methacrylate)-b-poly(2-(diethylamino)ethyl methacrylate) (XqPDMA-PDEA, where X refers to a mean degree of quaternization of the PDMA of either 0, 10, 50, or 100 mol%) copolymers at the mica/ and silica/aqueous solution interfaces have been investigated. These diblock copolymers form core-shell micelles with the PDEA chains located in the cores and the more hydrophilic PDMA chains forming the cationic micelle coronas at pH 9. These micelles adsorb strongly onto both mica and silica due to electrostatic interactions. In situ atomic force microscopy (AFM) has demonstrated that the mean spacing and the dimension of the adsorbed micelles depend on both the substrate and the mean degree of quaternization of the PDMA blocks. In particular, the morphology of the adsorbed nonquaternized 0qPDMA-PDEA copolymer micelles is clearly influenced by the substrate type: these micelles form a disordered layer on silica, while much more close-packed, highly ordered layers are obtained on mica. The key reasons for this difference are suggested to be the ease of lateral rearrangement for the copolymer micelles attached to the solid substrates and the relative rates of relaxation of the coronal PDMA chains.     

无机盐对氟烷基封端的嵌段共聚物在水相聚集行为的影响

以含氟醇钾盐(NFHO-K )作为引发剂,通过阴离子活性聚合方法合成了氟烷基封端的聚甲基丙烯酸-2-(二甲氨基)乙酯-block-聚甲基丙烯酸-2-(二乙氨基)乙酯嵌段共聚物(NFHO-PDMA-b-PDEA).该共聚物与一般的含氟嵌段共聚物相比,既具有优良的表面活性,又具有较好的溶解性.通过对溶液表面张力的测定,荧光探针法对溶液临界聚集浓度(cac)的测定和透射电子显微镜(TEM)对共聚物在溶液中胶束形态的研究,发现无机盐对共聚物在水溶液中的聚集行为有明显的影响,并可以增强共聚物的表面活性.     

Synthesis and "schizophrenic" micellization of double hydrophilic AB4 miktoarm star and AB diblock copolymers: structure and kinetics of micellization

Poly(N-isopropylacrylamide) (PNIPAM)-based tetrafunctional atom transfer radical polymerization (ATRP) macroinitiator (1b) was synthesized via addition reaction of mono-amino-terminated PNIPAM (1a) with glycidol, followed by esterification with excess 2-bromoisobutyryl bromide. Well-defined double hydrophilic miktoarm AB4 star copolymer, PNIPAM-b-(PDEA)4, was then synthesized by polymerizing 2-(diethylamino)ethyl methacrylate (DEA) via ATRP in 2-propanol at 45 degrees C using 1b, where PDEA was poly(2-(diethylamino)ethyl methacrylate). For comparison, PNIPAM-b-PDEA linear diblock copolymer with comparable molecular weight and composition to that of PNIPAM-b-(PDEA)4 was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The pH- and thermoresponsive "schizophrenic" micellization behavior of the obtained PNIPAM65-b-(PDEA63)4 miktoarm star and PNIPAM70-b-PDEA260 linear diblock copolymers were investigated by 1H NMR and laser light scattering (LLS). In acidic solution and elevated temperatures, PNIPAM-core micelles were formed; whereas at slightly alkaline conditions and room temperature, structurally inverted PDEA-core micelles were formed. The size of the PDEA-core micelles of PNIPAM65-b-(PDEA63)4 is much smaller than that of PNIPAM70-b-PDEA260. Furthermore, the pH-induced micellization kinetics of the AB4 miktoarm star and AB block copolymers were investigated by the stopped-flow light scattering technique upon a pH jump from 4 to 10. Typical kinetic traces for the micellization of both types of copolymers can be well fitted with double-exponential functions, yielding a fast (tau1) and a slow (tau2) relaxation processes. tau1 for both copolymers decreased with increasing polymer concentration. tau2 was independent of polymer concentration for PNIPAM65-b-(PDEA63)4, whereas it decreased with increasing polymer concentration for PNIPAM70-b-PDEA260. The chain architectural effects on the micellization properties and the underlying mechanisms were discussed in detail.     

Multicompartment micelles from hyperbranched star-block copolymers containing polycations and fluoropolymer segment

In this Article, we have investigated the self-assembly of a series of amphiphilic hyperbranched star-block copolymers to form multicompartment micelles in acidic aqueous solution (pH 3.0) or in a dimethylformamide/water (pH 3.0) mixture. These hyperbranched star-block copolymers were prepared via oxyanion-initiated polymerization process, using hydroxyl-terminated hyperbranched poly[3-ethyl-3-(hydroxymethyl)oxetane] (HP) as a macroinitiator precursor with multi-reactive sites. It was turned into oxyanion end-capped macroinitiator through the reaction with potassium hydride, and followed by a sequential addition of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) and 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate (OFPMA). The resultant HP-star-PDMAEMA-b-POFPMA copolymers were characterized via 1H NMR, 19F NMR, and gel permeation chromatography (GPC). The analyses of transmission electron microscopy (TEM), dynamic light scattering (DLS), and microelectrophoresis confirmed that these copolymers could directly self-organize into supramolecular multicompartment micelles with different diameters, depending on the length of the PDMAEMA segment, which can be protonated in acidic aqueous medium. The measurement of the zeta potential gave further evidence of the aggregating structures for the multicompartment micelles.     

Synthesis and characterization of novel pH-responsive microgels based on tertiary amine methacrylates

Emulsion polymerization of 2-(diethylamino)ethyl methacrylate (DEA) in the presence of a bifunctional cross-linker at pH 8-9 afforded novel pH-responsive microgels of 250-700 nm diameter. Both batch and semicontinuous syntheses were explored using thermal and redox initiators. Various strategies were evaluated for achieving colloidal stability, including charge stabilization, surfactant stabilization, and steric stabilization. The latter proved to be the most convenient and effective, and three types of well-defined reactive macromonomers were examined, namely, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (PDMA50-St), and partially quaternized styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (10qPDMA50-St). The resulting microgels were pH-responsive, as expected. Dynamic light scattering and 1H NMR studies confirmed that reversible swelling occurred at low pH due to protonation of the tertiary amine groups on the DEA residues. The critical pH for this latex-to-microgel transition was around pH 6.5-7.0, which corresponds approximately to the known pKa of 7.0-7.3 for linear PDEA homopolymer. The microgel particles were further characterized by electron microscopy and aqueous electrophoresis studies. Their swelling and deswelling kinetics were investigated by turbidimetry. The PDEA-based microgels were compared to poly[2-(diisopropylamino)ethyl methacrylate] (PDPA) microgels prepared with identical macromonomer stabilizers. These PDPA-based microgels had a lower critical swelling pH of around pH 5.0-5.5, which correlates with the lower pKa of PDPA homopolymer. In addition, the kinetics of swelling for the PDPA microgels was somewhat slower than that observed for PDEA microgels; presumably this is related to the greater hydrophobic character of the former particles.     

Self-assembled and Nanostructured Copolymer Aggregations of the Tertiary Amine Methacrylate Based Triblock Copolymers

The micellization behavior of novel tertiary amine methacrylate-based ABA type triblock copolymers formed by poly[2-(dimethylamino)ethyl methacrylate] [PDMA] middle block and poly[2-(diethylamino)ethyl methacrylate] [PDEA] or poly[2-(diisopropylamino)ethyl methacrylate] [PDPA] side blocks, PDPA_m-b-PDMA_n-b-PDPA_l, and PDEA_m-b-PDMA_n-b-PDEA_l was investigated. Both types of triblock copolymers were water-soluble and had potential for various applications due to their self-assembled and the bottom-up nanoscale micellar construction. The micellar aggregations of the triblock copolymers in aqueous solutions with varying comonomer ratios, molecular weights, temperatures, and pH values were investigated by small-angle X-ray scattering and dynamic light scattering. Compact micellar aggregations were obtained as 0.5 weight percent solutions at 20–21°C and pH 8.67 to 9.05, and characterized as polydispersed spherical core-shells. One group of triblock copolymer micelles had PDPA-cores with radii from 18 to 21 Å and PDMA-shell thicknesses of 89–105 Å, whereas the other group had PDEA-core spherical micelles with core radii of 60–62 Å and a PDMA-shell thicknesses of 64–66 Å.     

Biocompatible and pH‐responsive triblock copolymer mPEG‐b‐PCL‐b‐PDMAEMA: Synthesis,self‐assembly,and application

A series of well‐defined amphiphilic triblock copolymers [polyethylene glycol monomethyl ether]‐block‐poly(ε‐caprolactone)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] (mPEG‐b‐PCL‐b‐PDMAEMA or abbreviated as mPEG‐b‐PCL‐b‐PDMA) were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization. The chemical structures and compositions of these copolymers have been characterized by Fourier transform infrared spectroscopy, ¹H NMR, and thermogravimetric analysis. The molecular weights of the triblock copolymers were obtained by calculating from ¹H NMR spectra and gel permeation chromatography measurements. Subsequently, the self‐assembly behavior of these copolymers was investigated by fluorescence probe method and transmission electron microscopy, which indicated that these amphiphilic triblock copolymers possess distinct pH‐dependent critical aggregation concentrations and can self‐assemble into micelles or vesicles in PBS buffer solution, depending on the length of PDMA in the copolymer. Agarose gel retardation assays demonstrated that these cationic nanoparticles can effectively condense plasmid DNA. Cell toxicity tests indicated that these triblock copolymers displayed lower cytotoxicity than that of branched polyethylenimine with molecular weight of 25 kDa. In addition, in vitro release of Naproxen from these nanoparticles in pH buffer solutions was conducted, demonstrating that higher PCL content would result in the higher drug loading content and lower release rate. These biodegradable and biocompatible cationic copolymers have potential applications in drug and gene delivery. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1079–1091, 2010     

Synthesis and characterization of PNIPAM‐b‐(PEA‐g‐PDEA) double hydrophilic graft copolymer

A series of well‐defined double hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐(diethylamino)ethyl methacrylate) (PDEA) side chains, were synthesized by successive atom transfer radical polymerization (ATRP). The backbone was firstly prepared by sequential ATRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained diblock copolymer was transformed into macroinitiator by reacting with 2‐chloropropionyl chloride. Next, grafting‐from strategy was employed for the synthesis of poly(N‐isopropylacrylamide)‐b‐[poly(ethyl acrylate)‐g‐poly(2‐(diethylamino)ethyl methacrylate)] (PNIPAM‐b‐(PEA‐g‐PDEA)) double hydrophilic graft copolymer. ATRP of 2‐(diethylamino)ethyl methacrylate was initiated by the macroinitiator at 40 °C using CuCl/hexamethyldiethylenetriamine as catalytic system. The molecular weight distributions of double hydrophilic graft copolymers kept narrow. Thermo‐ and pH‐responsive micellization behaviors were investigated by fluorescence spectroscopy, ¹H NMR, dynamic light scattering, and transmission electron microscopy. Unimolecular micelles with PNIPAM‐core formed in acidic environment (pH = 2) with elevated temperature (≥32 °C); whereas, the aggregates turned into vesicles in basic surroundings (pH ≥ 7.2) at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5638–5651, 2008     

Biomimetic stimulus-responsive star diblock gelators

Novel biomimetic gelators with star diblock copolymer architectures have been synthesized by atom-transfer radical polymerization (ATRP). Two types of trifunctional ATRP initiator were used to polymerize 2-(methacryloyloxy)ethyl phosphorylcholine [MPC] at 20 degrees C, followed by sequential monomer addition of various tertiary amine methacrylates or mixtures thereof. Poor living character was achieved using an amide-based trifunctional initiator, but the analogous triester initiator gave reasonably well-defined thermo-responsive and pH-responsive star diblock copolymers. The most effective thermo-responsive gelators were obtained by the statistical terpolymerization of 2-(dimethylamino)ethyl methacrylate [DMA], 2-(diethylamino)ethyl methacrylate [DEA], and a monomethoxy-capped poly(propylene oxide) methacrylate [PPOMA], whereas pH-responsive gelators were prepared using 2-(diisopropylamino)ethyl methacrylate [DPA] as the second monomer. Star diblock copolymer gelators that were both thermo-responsive and pH-responsive were obtained by the statistical copolymerization of DMA with DPA. Copolymer compositions were assessed by 1H NMR spectroscopy, and the molecular weight distributions of the three-arm star MPC homopolymer precursors were assessed by aqueous gel permeation chromatography. Static light scattering was used to obtain weight-average molecular weights of selected star diblock copolymers and rheological measurements and variable-temperature 1H NMR were used to probe the onset of gelation.     

Synthesis of stimuli‐responsive macroazoinitiators and their use as an inistab toward hairy polymer latex particles

Stimuli‐responsive macroazoinitiators with central azo unit have been synthesized by atom transfer radical polymerization (ATRP) of 2‐(dimethylamino)ethyl methacrylate or 2‐(diethylamino)ethyl methacrylate in 2‐propanol at 25 °C. The mean degree of polymerization of the polymer chains besides the azo group was fixed between 25 and 60. ¹H NMR, gel permeation chromatography, UV‐Vis spectrophotometer, and surface tensiometer were used to characterize the stimuli‐responsive macroazoinitiators in terms of their chemical structure, molecular weight, polydispersity, and pH‐responsive behavior, respectively. Eventually, dispersion polymerization of styrene using the poly[2‐(diethylamino)ethyl methacrylate] (PDEA) macroazoinitiator as an inistab (initiator + stabilizer) in 2‐propanol medium was conducted. Near‐monodisperse 98 nm polystyrene (PS) latex particles with pH‐responsive PDEA hair were successfully synthesized. The PS latex particles with the PDEA hair can be dispersed in acidic aqueous media where the PDEA hair was protonated and was solvated, and can be flocculated in basic aqueous media where the PDEA hair was deprotonated and was precipitated. This dispersion‐flocculation cycle was reversible. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3431–3443, 2009     

Synthesis and supramolecular organization of amphiphilic diblock copolymers combining poly(N,N-dimethylamino-2-ethyl methacrylate) and poly(epsilon-caprolactone)

Well-defined poly(epsilon-caprolactone) (PCL)/poly(N,N-dimethylamino-2-ethyl methacrylate (PDMAEMA) diblock copolymers were synthesized, and their self-assembly was investigated as micelles both in aqueous solutions and in thin solid deposits. The synthetic approach combines controlled ring opening polymerization (ROP) of epsilon-caprolactone (CL) and atom transfer radical polymerization (ATRP) of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA). Diblock copolymers were prepared by ROP of CL initiated by (Al(OiPr)3), followed by quantitative reaction of the PCL hydroxy end-groups with bromoisobutyryl bromide. The alpha-isopropyloxy omega-2-bromoisobutyrate poly(epsilon-caprolactone) (PCL-Br) obtained was used as a macroinitiator for the ATRP of DMAEMA. The molecular characterization of those diblock copolymers was performed by 1H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self-assembly of the copolymers into micellar aggregates in aqueous media was followed with dynamic light scattering (DLS), as a function of concentration and the pH. In parallel, the morphology of the solid deposits of those micelles was examined with atomic force microscopy (AFM).     

Synthesis and characterization of well‐defined optically active methacrylic diblock copolymers

A new, simple, and cost‐effective approach toward the development of well‐defined optically active diblock copolymers based on methacrylate monomers is described for the first time. Starting from the low‐cost optically active (S)‐(?)‐2‐methyl‐1‐butanol, a new optically active methacrylic monomer, namely, (S)‐(+)‐2‐methyl‐1‐butyl methacrylate [(S)‐(+)‐MBuMA], was synthesized. Reversible addition fragmentation chain transfer polymerization was then used for preparing well‐defined poly[(S)‐(+)‐MBuMA] homopolymers and water‐soluble diblock copolymers based on [(S)‐(+)‐MBuMA] and the hydrophilic and ionizable monomer 2‐(dimethyl amino)ethyl methacrylate (DMAEMA). The respective homopolymers and diblock copolymers were characterized in terms of their molecular weights, polydispersity indices, and compositions by size exclusion chromatography and ¹H NMR spectroscopy. Polarimetry measurements were used to determine the specific optical rotations of these systems. The structural and compositional characteristics of micellar nanostructures possessing an optically active core generated by p((S)‐(+)‐MBuMA)‐b‐p(DMAEMA) chains characterized by predetermined molecular characteristics may be easily tuned to match biological constructs. Consequently, the aggregation behavior of the p[(S)‐(+)‐MBuMA]‐b‐p[DMAEMA] diblock copolymers was investigated in aqueous media by means of dynamic light scattering and atomic force microscopy, which revealed the formation of micelles in neutral and acidified aqueous solutions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Precisely installing gold nanoparticles at the core/shell interface of micellar assemblies of triblock copolymers

Two reduction-cleavable ABA triblock copolymers possessing two disulfide linkages, PMMA-ss-PMEO₃MA-ss-PMMA and PDEA-ss-PEO-ss-PDEA were synthesized via facile substitution reactions from homopolymer precursors, where PMMA, PMEO₃MA, PDEA, and PEO represent poly(methyl methacrylate), poly(tri(ethylene glycol) monomethyl ether methacrylate, poly(2-(diethylamino)ethyl methacrylate), and poly(ethylene oxide), respectively. Spherical micelles were obtained through supramolecular self-assembly of these two triblock copolymers in aqueous solutions. The resultant micelles with abundant disulfide bonds could serve as soft templates and precisely accommodate gold nanoparticles in the core/shell interface as a result of the formation of Au-S bonds.     

pH-responsive aggregates from double hydrophilic block copolymers carrying zwitterionic groups. Encapsulation of antiparasitic compounds for the treatment of leishmaniasis

A series of well-defined poly[(ethylene oxide)-b-2-(dimethylamino)ethyl methacrylate] (PEO-b-PDMAEMA) diblock copolymers were synthesized by atom transfer radical polymerization (ATRP) techniques. Post-polymerization reactions were performed to transform a portion of the tertiary amine groups of the PDMAEpsilonMA into phosphorozwitterions. The aggregation behavior of the prepared zwitterionic block copolymers was investigated by static and dynamic light scattering techniques at 25 and 37 degrees C, in weakly basic and acidic aqueous solutions. Antiparasitic drugs used for the treatment of Leishmania were incorporated into the copolymer aggregates. The effect of the solution pH, the zwitterion content, temperature, and the quantity of the incorporated drug on the aggregation behavior of the copolymers was tested.     

Chain-length dependence of diblock copolymer micellization kinetics studied by stopped-flow pH-jump

A series of well-defined poly(ethylene oxide)- b-poly(2-(diethylamino)ethyl methacrylate) (PEO- b-PDEA) diblock copolymers containing PEO block of identical chain length and PDEA block with varying degrees of polymerization (DP, in the range of 32-154) were prepared via atom transfer radical polymerization (ATRP) employing a PEO-based macroinitiator (DP = 113). Upon a pH-jump from 3 to 12 under highly efficient stopped-flow mixing conditions, PEO- b-PDEA copolymers spontaneously form spherical micelles of increasing sizes and aggregation numbers ( N agg) with increasing PDEA chain lengths. Stopped-flow light scattering technique was used to probe the pH-induced micellization kinetics of PEO- b-PDEA copolymers, aiming to elucidate the PDEA chain-length effects on the unimer-to-micelle transition process. Upon a stopped-flow pH-jump from 3 to 12, the obtained dynamic traces can be well-fitted with double exponential functions. The calculated fast and slow characteristic relaxation times (tau 1 and tau 2) can be ascribed to the formation of quasi-equilibrium micelles (fast process) and subsequent relaxation into final equilibrium micelles (slow process), respectively. For PEO 113- b-PDEA 32 and PEO 113- b-PDEA 61, tau 2 is almost independent of polymer concentrations, suggesting that the relaxation from quasi-equilibrium micelles into final equilibrium micelles mainly proceeds via insertion/expulsion of unimer chains. Upon increasing the DP of pH-responsive PDEA block to 89, 117, and 154, the obtained slow relaxation time, tau 2, tends to decrease with increasing polymer concentrations, suggesting that the slow process is dominated by the micelle fusion/fission mechanism. The apparent activation energy ( E a) associated with tau 2 has also been determined from temperature-dependent micellization kinetics for five PEO- b-PDEA copolymers. It was found that during micellization, copolymers with longer PDEA blocks exhibit much lower E a compared to those with shorter blocks. Thus, we observed experimentally for the first time that increasing the hydrophobic block length in double hydrophilic block copolymers (DHBCs) can transform the mechanism of the slow process from unimer insertion/expulsion to micelle fusion/fission.     

Probing the micellization kinetics of pyrene end-labeled diblock copolymer via a combination of stopped-flow light-scattering and fluorescence techniques

A pyrene end-labeled double hydrophilic diblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate) (Py-PDEA-b-PDMA), was synthesized by sequential monomer addition via oxyanionic polymerization using a 1-pyrenemethanol-based initiator. This diblock copolymer exhibits reversible pH-responsive micellization behavior in aqueous solution, forming PDEA-core micelles stabilized by the soluble PDMA block at neutral or alkaline pH. Taking advantage of the pyrene probe covalently attached to the end of the PDEA block, the pH-induced micellization kinetics of Py-PDEA-b-PDMA was monitored by stopped-flow light scattering using a fluorescence detector. Upon a pH jump from 4.0 to 9.0, both the scattered light intensity and excimer/monomer fluorescence intensity ratios (IE/IM) increase abruptly initially, followed by a more gradual increase to reach plateau values. Interestingly, the IE/IM ratio increases abruptly within the first 10 ms: a triple exponential function is needed to fit the corresponding dynamic trace, leading to three characteristic relaxation time constants (tau(1,fluo) < tau(2,fluo) < tau(3,fluo)). On the other hand, dynamic traces for the scattered light intensity can be well-fitted by double exponential functions: the resulting time constants tau(1,scat) and tau(2,scat) can be ascribed to formation of the quasi-equilibrium micelles and relaxation into their final equilibrium state, respectively. Most importantly, tau(1,scat) obtained from stopped-flow light scattering is in general agreement with tau(2,fluo) obtained from stopped-flow fluorescence. The fastest process (tau(1,fluo) approximately 4 ms) detected by stopped-flow fluorescence is ascribed to the burst formation of small transient micelles comprising only a few chains, which are too small to be detected by conventional light scattering. These nascent micelles undergo rapid fusion and grow into quasi-equilibrium micelles and then slowly approach their final equilibrium state. The latter two processes can be detected by both techniques.     

Amphiphilic diblock copolymers bearing pendant aromatic acetal groups: Synthesis and tunable pH‐triggered assembly/disassembly transition behavior

A novel aromatic acetal‐based acid‐labile monomer 2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane (HEDPA) was synthesized and polymerized by reversible addition fragmentation chain transfer (RAFT) polymerization using alkynyl functional chain transfer agent (CTA‐Alk). Afterward, a series of amphiphilic diblock copolymers composed of fixed hydrophobic poly(2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane) (PDAEP) segments and various lengths of hydrophilic mPEG segments were prepared through click reaction between alkynyl‐terminated PDAEP and azido‐terminated mPEG. The self‐assembly behaviors of the diblock copolymers were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence spectroscopy, and ¹H NMR. These results indicated that the diblock copolymers could self‐assemble into nano‐sized micelles with PDAEP cores and PEG coronas in aqueous solution. DLS, fluorescence spectroscopy and UV–vis spectroscopy were used to monitor the pH‐triggered assembly/disassembly transition of the micelles. These results showed that the assembly/disassembly transition behaviors of the diblock copolymers micelles can be adjusted by changing the lengths of the mPEG segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1537–1547     

Cross-linking of cationic block copolymer micelles by silica deposition

Diblock copolymer micelles comprising cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMA) coronas and hydrophobic poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) cores are used as nanosized templates for the deposition of silica from aqueous solution at pH 7.2 and 20 degrees C. Both noncross-linked and shell cross-linked (SCL) micelles can be coated with silica without loss of colloid stability. Under optimized conditions, the silica deposition is confined to the partially quaternized cationic PDMA chains, leading to hybrid copolymer-silica particles of around 35 nm diameter with well-defined core-shell morphologies. 1H NMR studies confirmed that the PDPA cores of these copolymer-silica particles became protonated at low pH and deprotonated at high pH, which suggests possible encapsulation and controlled release applications. Moreover, in situ silica deposition effectively stabilizes the PDPA-PDMA micelles, which remain intact on lowering the solution pH (whereas the original noncross-linked PDPA-PDMA micelles dissociate in acidic solution). This suggests a convenient route to silica-stabilized SCL micelles under mild conditions.