Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

基于石墨烯光子晶体光纤的流体传感器

与传统的传感器设备阵列相比,由于结构更为简单,具有广泛检测兼容性的光纤系统逐渐成为分布式监测的有力候选者。然而,受工作机制的限制,大多数光纤传感器仍局限于对折射率等物理参数进行探测,一种用于环境化学监测的全光纤分布式传感系统亟待研发。本工作中,我们向化学气相沉积法生长的石墨烯光子晶体光纤(Gr-PCF)中引入了一种化学传感机制。初步结果表明,石墨烯光子晶体光纤可以选择性地检测浓度为ppb级的二氧化氮气体,并在液体中表现出离子敏感性。石墨烯光子晶体光纤与光纤通信系统的波分、时分复用技术结合后,将为实现分布式光学传感环境问题提供巨大的潜力和机会。     

Graphene-based sensors for detection of heavy metals in water: a review

Graphene (G) is attracting significant attention because of its unique physical and electronic properties. The production of graphene through the reduction of graphene oxide (GO) is a low-cost method. The reduction of GO can further lead to electrically conductive reduced GO. These graphene-based nanomaterials are attractive for high-performance water sensors due to their unique properties, such as high specific surface areas, high electron mobilities, and exceptionally low electronic noise. Because of potential risks to the environment and human health arising from heavy-metal pollution in water, G-/GO-based water sensors are being developed for rapid and sensitive detection of heavy-metal ions. In this review, a general introduction to graphene and GO properties, as well as their syntheses, is provided. Recent advances in optical, electrochemical, and electrical detection of heavy-metal ions using graphene or GO are then highlighted. Finally, challenges facing G/GO-based water sensor development and outlook for future research are discussed.     

Highly Sensitive Flexible Pressure Sensors based on Graphene/Graphene Scrolls Multilayer Hybrid Films

In recent years, flexible pressure sensors have attracted much attention owing to their potential applications in motion detection and wearable electronics. As a result, important innovations have been reported in both conductive materials and the underlying substrates, which are the two crucial components of a pressure sensor. 1D materials like nanowires are being widely used as the conductive materials in flexible pressure sensors, but such sensors usually exhibit low performances mainly due to the lack of strong interfacial interactions between the substrates and 1D materials. In this paper, we report the use of graphene/graphene scrolls hybrid multilayers films as the conductive material and a micro-structured polydimethylsiloxane substrate using Epipremnum aureum leaf as the template to fabricate highly sensitive pressure sensors. The 2D structure of graphene allows to strongly anchor the scrolls to ensure the improved adhesion between the highly conductive hybrid films and the patterned substrate. We attribute the increased sensitivity (3.5 kPa\begin{document}$ ^{-1} $\end{document}), fast response time (\begin{document}$ < $\end{document}50 ms), and the good reproducibility during 1000 loading-unloading cycles of the pressure sensor to the synergistic effect between the 1D scrolls and 2D graphene films. Test results demonstrate that these sensors are promising for electronic skins and motion detection applications.     

碳基量子点荧光传感器在环境检测中的应用研究

由于碳基量子点优越的光学性能、良好的水溶性及良好的生物相容性，其在荧光传感器方面的应用引起了越来越多人的关注，特别是其对金属离子卓越的检测性能使其广泛应用于环境检测。为了更好的了解到碳基量子点的应用，从碳量子点、石墨烯量子点、氧化石墨烯量子点的合成和近十年来关于其在环境检测中的应用做了总结，并对碳基量子点荧光传感器的应用做了展望。     

Spatially resolved analyte mapping with time-of-flight optical sensors

Simultaneous real-time acquisition of analytical data from several locations is attractive in a variety of applications. This brief review traces the evolution of approaches to such measurements. Greatest emphasis is placed on optical time-of-flight chemical detection when signals are multiplexed from several point sensors or when the measurements are taken along the length of a single continuous extended-length ‘distributed' sensing element. The use of sensors featuring extended-length continuous chemically sensitive optical fibers offers detection arrangements for which there is no counterpart in conventional chemical sensor technologies.     

Nano‐Graphene Oxide Based Multichannel Sensor Arrays towards Sensing of Protein Mixtures

Optical array‐based sensors are attractive candidates for the detection of various bio‐analytes due to their convenient fabrication and measurements. For array‐based sensors, multichannel arrays are more advantageous and used frequently in many electronic sensors. But most reported optically array based sensors are constructed on a single channel array. This difficulty is mainly instigated from the overlap in optical responses. In this report we have used nano‐graphene oxide (nGO) and suitable fluorophores as sensor elements to construct a multichannel sensor array for the detection of protein analytes. By using the optimized multichannel array we are able to detect different proteins and mixtures of proteins with 100 % classification accuracy at sub‐nanomolar concentration. This modified method expedites the sensing analysis as well as minimizes the use of both analyte and sensor elements in array‐based protein sensing. We have also used this system for the single channel array‐based sensing to compare the sensitivity and the efficacy of these two systems for other applications. This work demonstrated an intrinsic trade‐off associated with these two methods which may be necessary to balance for array‐based analyte detections.     

Selective Electrochemical Detection of Explosives with Nanomaterial Based Electrodes

Explosive detection technologies play a critical role in maintaining national security, remain an active research field with many devices and analytical/electroanalytical techniques. Analytical chemistry needs for homeland defense against terrorism make it clear that real-time and on-site detection of explosives and chemical warfare agents (CWAs) are in urgent demand. Thus, current detection techniques for explosives have to be improved in terms of sensitivity and selectivity, opening the way to electrochemical devices suitable to obtain the targeted analytical information in a simpler, cheaper and faster way. For the electrochemical determination of energetic substances, a large number of sensor electrodes have been presented in literature using different modification materials, especially displaying higher selectivity with molecularly imprinted polymers (MIPs). MIPs have already been utilized for the detection of hazardous materials due to their mechanical strength, flexibility, long-time storage and low cost. The sensitivity of MIP-based electrosensors can be enhanced by coupling with nanomaterials such as graphene oxide (GOx), carbon nanotubes (CNTs), or nanoparticles (NPs). Specific characteristics of involved nanomaterials, their modification, detection mechanism, and other analytical aspects are discussed in detail. Non-MIP electrosensors are generally functionalized with materials capable of charge transfer, H-bonding or electrostatic interactions with analytes for pre-concentration and electrocatalysis on their surface, whereas nanobio-electrosensors use analyte-selective aptamers having specific sequences of DNA, peptides or proteins to change the potential or current. This review intends to provide a combination of information related to MIPs and nanomaterial-based electrochemical sensors, limited to the most significant and illustrative work recently published.     

Optical chemical sensors for the detection of explosives and associated substances

The main analytical characteristics of optical chemical sensors for detecting the vapors and microparticles of explosives and associated substances are compared. The limits of detection, sensitivity, sensor setting time (response speed) and recovery time after the action of an analyte, and the selectivity of fluorescence sensors, chemiluminescence sensors, surface-enhanced Raman sensors, surface plasmon resonance sensors, absorption integrated optical waveguide sensors, waveguide interferometric sensors, and ring resonator based sensors. The effectiveness of the use of nanosized structures and bio- and nanostructured specific coatings in optical sensors is analyzed.     

Optical waveguide sensors in analytical chemistry: today’s instrumentation, applications and trends for future development

Current concepts for chemical and biochemical sensing based on detection with optical waveguides are reviewed. The goals are to provide a framework for classifying such sensors and to assist a designer in selecting the most suitable detection techniques and waveguide arrangements. Sensor designs are categorized on the basis of the five parameters that completely describe a light wave: its amplitude, wavelength, phase, polarization state and time-dependent waveform. In the fabrication of a successful sensor, the physical or chemical property of the determined species and the particular light wave parameter to detect it should be selected with care since they jointly dictate the sensitivity, stability, selectivity and accuracy of the eventual measurement. The principle of operation, the nature or the detected optical signal, instrumental requirements for practical applications, and associated problems are analyzed for each category of sensors. Two sorts of sensors are considered: those based on direct spectroscopic detection of the analyte, and those in which the analyte is determined indirectly through use of an analyte-sensitive reagent. Key areas of recent study, useful practical applications, and trends in future development of optical waveguide chemical and biochemical sensors are considered.     

The pillar[5]arene-based spun thin films: preparation,characterization, development of optical and mass sensitive sensors for swelling dynamics and gas sensing abilities

Pillar[5]arene (P5)-based materials can be preferable one of the most sensing elements in chemical sensor applications due to their high cavity and their special chiral structure. While the P5-based macrocycle molecules have been utilized as thin-film materials, the reports of chemical sensor application by performing P5 as sensor molecules have been very limited in the available literature. In this report, quinoline P5 (P5-Q) molecules were used to produce thin films via spin coating technique. P5-Q spun films were characterized with Atomic Force Microscopy (AFM) and Ultraviolet–Visible (UV–Vis) spectrophotometer. The gas sensing abilities of these P5-Q spun films were investigated by Quartz Crystal Microbalance (QCM) and Surface Plasmon Resonance (SPR) techniques. In order to illuminate the gas sensing properties of P5-Q spun films, they were prepared as mass-sensitive and optical sensors. These sensors were utilized for its sensing abilities against organic vapours (acetone, methyl alcohol, and ethyl alcohol) by the mechanism of host–guest interaction. The current study also describes the diffusion coefficients of these organic vapors to illuminate the swelling dynamics of P5-Q spun films by performing Fick’s diffusion equation. The responses of P5-based optical (SPR) or mass sensitive (QCM) sensor in terms of the change in reflective intensity or the change in frequency and the values of diffusion coefficients showed that P5-Q molecules can be developed as potential chemical sensor element for acetone vapor compared to alcohol vapors.

     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

Optical waveguide sensors in analytical chemistry: today’s instrumentation, applications and trends for future development

Current concepts for chemical and biochemical sensing based on detection with optical waveguides are reviewed. The goals are to provide a framework for classifying such sensors and to assist a designer in selecting the most suitable detection techniques and waveguide arrangements. Sensor designs are categorized on the basis of the five parameters that completely describe a light wave: its amplitude, wavelength, phase, polarization state and time-dependent waveform. In the fabrication of a successful sensor, the physical or chemical property of the determined species and the particular light wave parameter to detect it should be selected with care since they jointly dictate the sensitivity, stability, selectivity and accuracy of the eventual measurement. The principle of operation, the nature or the detected optical signal, instrumental requirements for practical applications, and associated problems are analyzed for each category of sensors. Two sorts of sensors are considered: those based on direct spectroscopic detection of the analyte, and those in which the analyte is determined indirectly through use of an analyte-sensitive reagent. Key areas of recent study, useful practical applications, and trends in future development of optical waveguide chemical and biochemical sensors are considered. Received: 19 January 1998 / Revised: 15 May 1998 / Accepted: 21 May 1998     

Optical Chemical Sensors Based on Sol-Gel Materials: Recent Advances and Critical Issues

The use of the sol-gel process to produce materials for optical chemical sensors and biosensors is attracting considerable interest. This interest derives mainly from the design flexibility of the sol-gel process and the ease of fabrication. In most applications the sol-gel material is used to provide a microporous support matrix in which analyte-sensitive species are entrapped and into which smaller analyte molecules may diffuse. Sensors based on entrapped organic and inorganic dyes, enzymes and other biomolecules have been reported. A range of sensor configurations has been employed, including monoliths, thin films, as well as more elaborate structures. In this paper a selection is presented of recent significant developments in optical chemical sensors which employ solgel-derived materials. These developments include the tailoring of sol-gel materials to optimise sensor response, advanced waveguide structures and novel probe-tip sensors. Those issues which remain critical to the eventual deployment of sol-gel sensors are examined. In particular, the problems of leaching, microstructural stability, diffusion-limited response time, and susceptibility to interferents are discussed and some solutions proposed.     

碳点在抗生素分析检测中的应用

抗生素的过度使用对环境造成了极大破坏,对其进行监测控制刻不容缓.常用的分析检测技术,如高效液相色谱(HPLC)、气相色谱(GC)、高效液相色谱-串联质谱(HPLC-MS/MS)等具有高效快速、重现性好、可自动化操作等优点.但对环境样品中抗生素的检测存在样品前处理过程繁琐、检测灵敏度低、实验成本高等问题.结合现有的检测技...     

The art of fluorescence imaging with chemical sensors

Fluorescence imaging techniques involving chemical sensors are essential tools in many fields of science and technology because they enable the visualization of parameters which exhibit no intrinsic color or fluorescence, for example, oxygen, pH value, CO(2), H(2)O(2), Ca(2+), or temperature, to name just a few. This Review aims to highlight the state of the art of fluorescence sensing and imaging, starting from a comprehensive overview of the basic functional principles of fluorescent probes (or indicators) and the design of sensor materials. The focus is directed towards the progress made in the development of multiple sensors and methods for their signal read out. Imaging methods involving optical sensors are applied in quite diverse scientific areas, such as medical research, aerodynamics, and marine research.     

石墨相碳化氮(g-C3N4)纳米材料在分析化学中的应用进展

石墨相碳化氮(g-C_3N_4)具有类似于石墨烯的片层结构,其独特的电子能带结构、热稳定性以及高化学稳定性,优异的光学、电学性质,使之在生物成像、光、电传感器方面具有广阔的应用前景。该文综述了g-C_3N_4纳米材料在电化学、光学分析等分离分析方面的应用进展,并展望了其发展前景。     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Graphene enhanced electrochemiluminescence of CdS nanocrystal for H2O2 sensing

Graphene-CdS (G-CdS) nanocomposites were successfully prepared by CdS nanocrystals (CdS NCs) formed in situ on the surface of graphene sheets, using graphene oxide (GO) sheets with rich negatively charged carboxylic acid groups as starting materials. Compared with pure CdS NCs, the presence of the graphene doped in G-CdS nanocomposites could facilitate the electrochemical redox process of CdS NCs; further, the as-prepared G-CdS nanocomposite can react with H₂O₂ to generate strong and stable electrochemiluminescent (ECL) emission, which not only enhances its ECL intensity by about 4.3-fold but also decreases its onset potential for about 320 mV. The as-prepared solid-state ECL H₂O₂ sensor shows acceptable linear response from 5 μM up to 1 mM with a detection limit of 1.7 μM (S/N = 3). The ECL H₂O₂ sensor exhibits excellent reproducibility and long-term stability. Such a property would promote the potential application of the graphene as enhanced materials in fabricating sensors for chemical and biochemical analysis.