Single-crystalline rutile TiO2 hollow spheres: room-temperature synthesis, tailored visible-light-extinction, and effective scattering layer for quantum dot-sensitized solar cells

A general synthesis of inorganic single-crystalline hollow spheres has been achieved through a mechanism analogous to the Kirkendall effect, based on a simple one-step laser process performed at room temperature. Taking TiO(2) as an example, we describe the laser process by investigating the influence of experimental parameters, for example, laser wavelength, laser fluence/irradiation time, liquid medium, and concentration of starting materials, on the formation of hollow spheres. It was found that the size-tailored TiO(2) hollow spheres demonstrate tunable light scattering over a wide visible-light range. Inspired by the effect of light scattering, we introduced the TiO(2) hollow sphere's scattering layer in quantum dot-sensitized solar cells and achieved a current notable 10% improvement of solar-to-electric conversion efficiency, indicating that TiO(2) hollow spheres are potential candidates in optical and optoelectronic devices.     

Synthesis of Au-based porous magnetic spheres by selective laser heating in liquid

We report the synthesis of Au-based submicrometer-sized spherical particles with uniform morphology/size and integrated porosity-magnetic property in a single particles. The particles are synthesized by a two-step process: (a) selective pulsed laser heating of colloidal nanoparticles to form particles with Au-rich core and Fe-rich shell and (b) acid treatment which leads to formation of porous architecture on particle surface. The simple, fast, inexpensive technique that is proposed demonstrates very promising perspectives for synthesis of composite particles.     

Cation exchange: a simple and versatile route to inorganic colloidal spheres with the same size but different compositions and properties

This paper describes a cation exchange approach to the synthesis of metal chalcogenide core-shell particles with the same size but a number of different compositions. This method begins with the preparation of colloidal spheres of amorphous Se (a-Se), followed by their reaction with Ag atoms to form Se@Ag2Se spheres. These core-shell spheres are then converted into Se@MSe (M = Zn, Cd, and Pb) via cation exchange with Zn2+, Cd2+, and Pb2+. All the colloidal spheres prepared using this method are monodispersed in size and characterized by a spherical shape and a smooth surface. Starting from the same batch of Se@Ag2Se, the resultant Se@MSe samples were essentially the same in size. Furthermore, these core-shell colloidal spheres can be easily made superparamagnetic by incorporating Fe3O4 nanoparticles into the a-Se cores. This synthetic approach provides a simple and versatile route to magnetoactive core-shell spheres with the same size but a range of different compositions. This study also implies that it is feasible to further increase the diversity of cations that can be used in the cation exchange of a colloidal system to produce multifunctional core-shell spheres with a variety of properties.     

Fabrication of spherical colloidal crystals using electrospray

We demonstrated the use of electrohydrodynamic atomization to prepare uniform-sized emulsion droplets in which equal spheres of silica or polystyrene were dispersed. The size of the emulsion droplets was easily controlled by the electric field strength and the flow rate, independently of the diameter of the nozzles. During the evaporation of solvent in the droplets, spherical colloidal crystals were formed by self-assembly of the monodisperse colloidal spheres. The diameter of the spherical colloidal crystals was in the range of 10-40 microm. Depending on the stability of colloidal particles, the morphology of the self-assembled structure was varied. In particular, silica spheres in ethanol droplets were self-assembled into compactly packed silica colloidal crystals in spherical shapes, whereas polystyrene latex spheres in toluene droplets self-assembled into spherical colloidal crystal shells with hollow cores. The silica colloidal assemblies reflected diffraction colors according to the three-dimensionally ordered arrangement of silica spheres.     

A SURFACTANT-ASSISTED APPROACH FOR PREPARING COLLOIDAL AZO POLYMER SPHERES WITH NARROW SIZE DISTRIBUTION

A surfactant-assisted method for preparing colloidal spheres with narrow size distribution from a polydispersed azo polymer has been developed in this work. The colloidal spheres were formed through gradual hydrophobic aggregation of the polymeric chains in THF-H2O dispersion media, which was induced by a steady increase in the water content. Results showed that the addition of a small amount of surfactant （SDBS） could significantly narrow the size distribution of the colloidal spheres. The size distribution of the colloidal spheres was determined by the concentrations of azo polymer and the amount of surfactant in the systems. When the concentrations of polymer and surfactant amount were in a proper range, colloidal spheres with narrow size distribution could be obtained. The colloidal spheres formed by this method could be elongated along the polarization direction of the laser beams to be a new type of the colloid-based functional materials. upon Ar^＋ laser irradiation. The colloidal spheres are considered     

Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.     

Fabrication of crystalline silicon spheres by selective laser heating in liquid medium

Micrometer and submicrometer crystalline silicon spheres were fabricated by selective laser heating of irregular silicon particles in liquid medium. TEM, SEM, XRD, and XPS characterized the structure and morphology of the prepared silicon spheres. The results suggested that they were spherical with a single crystalline structure. In this study, the formation mechanism of the spheres is analyzed, and the process parameters are optimized to obtain high-quality silicon spheres. A theoretical deduction regarding the relationship between critical laser energy density and particle size is also discussed, by which we can predict that larger spheres can be obtained at higher laser energy densities.     

Laser-Induced "Regeneration" of Colloidal Particles: The Effects of Thermal Inertia on the Chemical Reactivity of Laser-Heated Particles

A size reduction of the suspended particles is observed upon irradiation of colloidal metal solutions by a high-power, pulsed laser, resulting in dramatic changes in their optical properties. The mechanism of change involves rapid production of ions as a consequence of laser heating, followed by diffusion and chemical reduction on a long time scale to form new colloidal particles. The process, by which large particles are differentially consumed relative to small ones, depends on the "thermal inertia" of the particles, which governs the temperature of the particles and hence their reactivity.     

Hollow silica spheres with an ordered pore structure and their application in controlled release studies

Herein we report the synthesis and characterization of hollow silica spheres with a narrow size distribution, uniform wall thickness, and a worm-like pore structure. The formation of these spheres was monitored by confocal laser scanning microscopy and dynamic light scattering. A model for the molecular build-up of these silica hollow spheres is derived from these data in combination with studies of the as-made particles by transmission electron microscopy, scanning electron microscopy, pore size analysis, thermogravimetric analysis, and solid-state nuclear magnetic resonance. We further demonstrate that these spheres can be used for the encapsulation and subsequent release of different dye molecules.     

Azo polymer colloidal spheres containing different amounts of functional groups and their photoinduced deformation behavior

In this work, colloidal spheres composed of azo polymers with different chromophore loading densities were prepared, and their photoinduced deformation behavior was studied. The colloids were constructed by using a series of amphiphilic epoxy-based random copolymers containing 4-carboxylazobenzene functional groups with different degrees of functionalization (DFs). The colloidal spheres were fabricated through gradual hydrophobic aggregation of the polymeric chains in tetrahydrofuran-H2O dispersion media, which was induced by gradually adding water into the systems. The colloidal spheres were characterized by using transmission electron microscopy and dynamic light scattering. The photoinduced deformation behavior was studied by irradiating the colloidal spheres with a linearly polarized Ar+ laser beam. Results showed that the critical water content (CWC) for the colloid formation is related to the DF of the polymers, and CWC increases with the increase of DF. The hydrodynamic diameter of the colloidal spheres is also related to the DF of the polymers. When the DF of the polymers increases, the average size of the colloids gradually decreases. The hydrodynamic diameter of the colloidal spheres increases as the water dropping rate decreases. When the dropping rate is below 20 microL/s, the size of the colloidal spheres increases abruptly as the dropping rate further decreases. Upon the linearly polarized Ar+ laser beam irradiation, the colloids composed of polymers with different DFs can all be elongated along the polarization direction of the laser beam. As DF increases, the deformation degree characterized by the axial ratio (l/d) almost linearly increases. These observations can give some insight into the photoinduced deformation mechanism and can be used to construct colloids with different sizes and photoresponsive ability.     

Controlled synthesis and luminescence of semiconductor nanorods

A variety of nearly monodisperse semiconductor nanocrystals, such as CdS, ZnS, and ZnS:Mn, with controllable aspect ratios have been successfully prepared through a facile synthetic process. These as-prepared nanocrystals were obtained from the reactions between metal ions and thioacetamide by employing octadecylamine or oleylamine as the surfactants. The effects of reaction temperature and time, ratios of thioacetamide to inorganic precursors, and the reactant content on the size and crystal purity of the nanorods, have been systematically investigated. The optical properties and the formation mechanism of the nanorods have also been discussed. For the next biolabel applications, these hydrophobic nanocrystals have also been transferred into hydrophilic colloidal spheres by means of an emulsion-based bottom-up self-assembly approach.     

Microwave-assisted self-organization of colloidal particles in confining aqueous droplets

Monodisperse aqueous emulsion droplets encapsulating colloidal particles were produced in the oil phase, and controlled microwave irradiation of the aqueous drop phase created spherical colloidal crystals by so-called evaporation-induced self-organization of the colloidal particles. Unlike usual colloidal crystals, colloidal crystals in spherical symmetry (or photonic balls) possessed photonic band gaps for the normal incident light independent of the position all over the spherical surface. While the consolidation of colloidal particles in emulsion droplets in an oven took several hours, the present microwave-assisted evaporation could reduce the time for complete evaporation to a few tens of minutes. Under the microwave irradiation, the aqueous phase in emulsions was superheated selectively and the evaporation rate of water could be controlled easily by adjusting the microwave intensity. The result showed that the packing quality of colloidal crystals obtained by the microwave-assisted self-organization was good enough to show photonic band gap characteristics. The reflectance of our photonic balls responded precisely to any change in physical properties including the size of colloidal particles, refractive index mismatch, and angle of the incident beam. In particular, for polymeric particles, the photonic band gap could be tuned by the intensity of microwave irradiation, and the reflection color was red-shifted with stronger microwave irradiation. Finally, for better photonic band gap properties, inverted photonic balls were prepared by using the spherical colloidal crystals as sacrificial templates.     

Amphiphilic azo polymer spheres, colloidal monolayers, and photoinduced chromophore orientation

In this work, azobenzene-containing colloidal spheres have been fabricated and used to construct photoresponsive monolayers. The colloidal spheres were prepared from an amphiphilic azobenzene-containing random copolymer through hydrophobic aggregation of the polymer chains, which was induced by adding the selective solvent (H2O) into a THF solution of the polymer. The size and size distribution of the spheres depended on the initial concentration of the azo polymer in THF and the H2O/THF ratio. Adjusting those factors and optimizing other preparation conditions, uniform colloidal spheres could be obtained. Monolayers composed of hexagonally close-packed colloidal spheres were prepared by the capillary-force-driven method. The colloidal monolayers showed obvious dichroism after laser irradiation due to the photoinduced azo-chromophore orientation occurred in the spheres. The orientation order parameter was related to the irradiation time and estimated to be 0.09 at the photostationary state. The colloidal spheres and their monolayers can potentially be used as building blocks or media for reversible optical data storage, photo-switching, sensors, and other photo-driven devices.     

Facile preparation of highly monodisperse small silica spheres (15 to >200 nm) suitable for colloidal templating and formation of ordered arrays

Highly monodisperse spherical silica nanoparticles with diameters ranging from ca. 15 to 200 nm were prepared using an environmentally friendly water-based synthesis. The size of the spheres can be precisely controlled by using a facile regrowth procedure in the same reaction media. Furthermore, these monodisperse silica spheres can be successfully used as seeds in the well-established St?ber silica preparation. The regrowth approach allows for easy incorporation of functional additives. High monodispersity and charge stabilization renders these nanoparticles highly suitable for close-packed array formation and colloidal templating.     

Synthesis of porous carbon balls from spherical colloidal crystal templates

Spherical inverse opal (IO) porous carbon was produced utilizing silica colloidal crystal spheres as templates. The spherical colloidal crystals were obtained through the self-assembly of monodisperse particles inside an emulsion droplet with confined geometry. The templates were inverted using a carbon precursor, phenol-formaldehyde (PF) resol. We demonstrated a two-step synthesis involving the subsequent infiltration of the PF resol precursor into the spherical colloidal crystal template and a one-step synthesis using a silica colloidal solution containing dissolved PF resol. In the former case, the sizes of the IO carbon balls were controlled by the size of the colloidal crystal templates, and diameters of a few micrometers up to 50 μm were obtained. The average diameter of the macropores created by the silica particles was 230 nm. Moreover, meso-/macroporous IO carbon balls were created using block-copolymer templates in the PF resol. In the one-step synthesis, the concentration of PF resol in the colloidal solution controlled the diameter of the IO carbon balls. IO balls smaller than 3 μm were obtained from the direct addition of 5% PF resol. The one-step synthesis produced rather irregular porous structures reflecting the less ordered crystallization processes inside the spherical colloidal crystals. Nitrogen adsorption and cyclic voltammetry measurements were conducted to measure the specific area and electroactive surface area of the IO carbon balls. The specific area of the mesopores-incorporated IO carbon balls was 1.3 times higher than that of bare IO carbon balls. Accordingly, the meso-/macroporous porous carbon balls exhibited higher electrocatalytic properties than the macroporous carbon balls.     

Stretching effect of linearly polarized Ar+ laser single-beam on azo polymer colloidal spheres

This work shows that a linearly polarized Ar+ laser single-beam irradiation can cause stretching deformation of azo polymer colloidal spheres along the polarization direction of the laser beam. An epoxy-based polymer, containing 4-amino-4'-carboxyazobenzene at each repeat unit, was used to construct the colloidal spheres. The colloidal spheres were prepared by gradual hydrophobic aggregation of the polymeric chains in a THF/H2O dispersion medium, which was induced by a steady increase in the water content. When the obtained colloidal spheres were exposed to the spatially filtered and collimated Ar+ laser beam (488 nm, 150 mW/cm2), the colloids were stretched along the polarization direction of the laser beam. In the testing period (20 min), the colloids were deformed continuously as the irradiation time increased. When 2D close-packed arrays of the colloidal spheres were irradiated by the polarized laser single-beam, the colloidal spheres were all uniformly stretched along the polarization direction of the laser beam. On the contrary, when the arrays were irradiated by the interfering p-polarized laser beams, only the colloidal spheres in the bright regions of the interference pattern were significantly deformed.     

Patterned assembly of colloidal particles by confined dewetting lithography

We report the assembly of colloidal particles into confined arrangements and patterns on various cleaned and chemically modified solid substrates using a method which we term "confined dewetting lithography" or CDL for short. The experimental setup for CDL is a simple deposition cell where an aqueous suspension of colloidal particles (e.g., polystyrene spheres) is placed between a floating deposition template (i.e., metal microgrid) and the solid substrate. The voids of the deposition template serve as an array of micrometer-sized reservoirs where several hydrodynamic processes are confined. These processes include water evaporation, meniscus formation, convective flow, rupturing, dewetting, and capillary-bridge formation. We discuss the optimal conditions where the CDL has a high efficiency to deposit intricate patterns of colloidal particles using polystyrene spheres (PS; 4.5, 2.0, 1.7, 0.11, 0.064 microm diameter) and square and hexagonal deposition templates as model systems. We find that the optimization conditions of the CDL method, when using submicrometer, sulfate-functionalized PS particles, are primarily dependent on minimizing attractive particle-substrate interactions. The CDL methodology described herein presents a relatively simple and rapid method to assemble virtually any geometric pattern, including more complex patterns assembled using PS particles with different diameters, from aqueous suspensions by choosing suitable conditions and materials.     

Structural Study of the Photo-Mediated Growth of Silver Nanoprisms

We present a small-angle X-ray scattering (SAXS) study of the anisotropic photoinduced growth of silver (Ag) nanoprisms in aqueous dispersions. The growth of nearly spherical (<10 nm) Ag particles into large (>40 nm) and thin (<10 nm) triangular nanoprisms induced by 550 nm laser is followed in terms of particle size using indirect and direct methods for irradiation times up to 150 min. During the process, the surface-to-volume ratio of the particles decreased. The SAXS data of the initial solution fit well to the model of polydisperse spheres with pronounced average diameters around 7.4 nm and 10 nm. The data after 45 min irradiation fit well to the model containing approximately the same amount of the initial particles and the end product, the nanoprisms.