J—J方程组的渐近惯性流形

本文构造了Ｌｉａｐｕｎｏｖ泛函，得出了Ｊｏｓｅｐｈｓｏｎ结中的ｓｉｎｅ－Ｇｏｒｄｏｎ方程组的高模态的衰减性质，从而给出了渐近惯性流形。     

模糊数学专家J.J.Buckley教授来华讲学

应汪浩教授和刘锡荟教授的邀请,美国阿拉巴马大学(University of Alabama at Birminsham) J.J.Buckley教授于1988年9月来华讲学,他先后在电子研究所和国防科技大学作了学术报告。     

复合材料平面断裂中的J积分

本文采用复变函数方法,首先将裂纹尖端应力和位移代入J积分的一般公式得到了线弹性正交异性复合材料单向板复合型裂纹尖端的J积分的复形式,其次证明了该J积分的路径无关性,最后推出了该J积分的计算公式.作为特例,给出了线弹性正交异性复合材料单向板Ⅰ,Ⅱ型裂纹尖端的J积分的复形式,路径无关性和计算公式.     

J正交矩阵的一些性质

给出了J正交矩阵的一些性质.     

J正交矩阵的一些性质

给出了J正交矩阵的一些性质．     

关于平面断裂中的J积分

本文利用复变函数和微积分的理论讨论线弹性各向同性均匀材料板和正交异性复合材料板Ⅰ、Ⅱ型裂纹尖端附近的J积分,得到了下列结果: (1)将各个J积分统一化为对坐标的曲线积分的标准形式:J=∫_rP(x,y)dx+Q(x,y)dy (2)证明了各个J积分的路径无关性. (3)推出了各个J积分的具体计算公式.     

广义M—J集的界与J—集Hausdorff维数的估计

解析出给出了广义M－J集的界,其中某界在某种意义上是最佳的。解决了应用逃兔时间等算法计算机构造其混沌分形图的首要问题,并在此基础上通过线性逼近的方法给出了某些情况下J－集Hausdorff维数的近似估计。     

Jónsson posets and unary Jónsson algebras

We show that if P is an infinite poset whose proper order ideals have cardinality strictly less than ${|P|}$ and ${\kappa}$ is a cardinal number strictly less than ${|P|}$ , then P has a principal order ideal of cardinality at least ${\kappa}$ . We apply this result to characterize the possible sizes of unary Jónsson algebras.     

由虚功原理推导J积分守恒

本文由力学的普遍原理——虚功原理推导出了三维情况下J积分守恒的一般形式;十分明显地给出了J积分守恒成立的几个必要条件.     

关于J－对称微分算子的J－自伴扩张的若干注记

本文给出了一条解析描述Ｊ－对称微分算子Ｊ－自伴扩张的新途径．我们借助方程Ｔ（ｙ）＝λｏｙ的解，而不是如文［３］利用方程＋（ｙ）＇＝－ｙ的解来描述Ｊ－对称微分算式的所有Ｊ－自伴域在奇异端点的边条件，不过我们假设生成的最小算子具非空正则域．我们对主要定理给出了若干有趣的注，得到了二阶极限圆情形的有趣结果．     

On the distributions of the ratios of the extreme roots to the trace of the Wishart matrix

In this paper, the authors cosider the derivation of the exact distributions of the ratios of the extreme roots to the trace of the Wishart matrix. Also, exact percentage points of these distributions are given and their applications are discussed.     

From the neutrino to the edge of the universe

Two recent findings necessitate a closer look at the existing standard models of particle physics and cosmology. These are the discovery of neutrino oscillation, and hence a non-zero mass on the one hand and, on the other, observations of distant supernovae which indicate that contrary to popular belief, the universe would continue to expand for ever, possibly accelerating in the process. In this paper it is pointed out that relatively recent studies which indicate a stochastic, quantum vacuum underpinning and a fractal structure for space time, reconcile both of the recent observations, harmoniously.     

On the comparison between the APV and the NPV computed via the WACC

The valuation of levered investment in the practice is made with the WACC approach, even if the superior technique of the APV is available. The paper shows that the APV can be interpreted as the arbitrage free value of the portfolio made by an investment and a supporting loan. Therefore the WACC evaluation, generally different from the APV, allows for arbitrage. We provide various conditions which completely characterize the sign of the error as a functions of all the variables entering the model.     

用常微分方程模型分析预防和隔离措施对SARS发病率的影响

通过建立常微分方程模型 ,分析了预防和隔离措施对 SARS发病率的影响 ,并把计算结果与实际统计数据进行了比较 ,结果表明 ,及时高效的预防和隔离措施能够有效地控制 SARS的传播 .     

On the relation between the A-polynomial and the Jones polynomial

This paper shows that the noncommutative generalization of the A-polynomial of a knot, defined using Kauffman bracket skein modules, together with finitely many colored Jones polynomials, determines the remaining colored Jones polynomials of the knot. It also shows that under certain conditions, satisfied for example by the unknot and the trefoil knot, the noncommutative generalization of the A-polynomial determines all colored Jones polynomials of the knot.

     

宏观因素影响下的系统中元件重要性研究

为研究复杂系统在工作环境中其组成元件对系统安全运行的重要性,将汪培庄先生的因素空间理论与笔者提出的空间事故树理论相结合,构造了一套元件重要性研究方法.构建系统T={U,C,D},将元件作为研究对象集合U,系统工作的宏观环境作为因素集C,元件重要性排序集作为D.对宏观环境中的工作时间a1和温度a_2进行划分形成不同的状态区域S_q,计算在S_q中元件xj的失效权重γ(AS_q(x_j))和在S_q中系统T的失效权重δ(AS_q(T))),从而得到x_j在S状态下的等效失效权重Z(AS_q(x_j)),研究状态S_q下的原件重要性排序D_η,及元件x_j失效性对a_1及a_2的敏感性.使用一个实际的电气系统维修情况统计资料,使用上述方法进行了研究,结果表明:不同工作环境下元件对系统的重要程度是不同的.元件对温度和使用时间是敏感的,并得到了在10³0°且5030°且50⁷5d环境下工作系统可靠性是最高的结论.在给定工作环境下,重要性大的元件多储备,重要性小的元件少储备,以满足系统维修需要,并指导实际工程.     

On choosing the location of the sources in the MFS

The satisfactory location for the sources outside the closure of the domain of the problem under consideration remains one of the major issues in the application of the method of fundamental solutions (MFS). In this work we investigate this issue by means of two algorithms, one based on the satisfaction of the boundary conditions and one based on the leave-one-out cross validation algorithm. By applying these algorithms to several numerical examples for the Laplace and biharmonic equations in a variety of geometries in two and three dimensions, we obtain locations of the sources which lead to highly accurate results, at a relatively low cost.     

On the dependence of the growth rate on the length of the defining relator

Let { } be a sequence of finitely presented groups with generating setA={a1, …, am}, and letRk be the symmetrized set of words over the alphabetA∪A−1 obtained from the defining words and their inverses by all cyclic shifts. We shall assume that the words inRk are cyclically irreducible, and their lengths tend to ∞ ask increases. In the paper, it is proved that ifRk satisfies the small cancellation conditionC'(1/6) and the number of relators increases not very rapidly with increasingk, then the growth rate ψ(Gk) tends to 2m−1 ask→∞. Translated fromMatematicheskie Zametki, Vol. 65, No. 4, pp. 611–617, April, 1999.     

On the algorithm of the solution of the signorini problem

An algorithm is proposed for solving the Signorini problem /1/ in the formulation of a unilateral variational problem for the boundary functional in the zone of possible contact /2/. The algorithm is based on a dual formulation of Lagrange maximin problems for whose solution a decomposition approach is used in the following sense: a Ritz process in the basis functions that satisfy the linear constraint of the problem, the differential equation in the domain, is used in solving the minimum problem (with fixed Lagrange multipliers); the maximum problem is solved by the method of descent (a generalization of the Frank-Wolf method) under convexity constraints on the Lagrange multipliers. The algorithm constructed can be conisidered as a modification of the well-known algorithm to find the Udzawa-Arrow-Hurwitz saddle points /3, 4/. The convergence of the algorithm is investigated. A numerical analysis of the algorithm is performed in the example of a classical contact problem about the insertion of a stamp in an elastic half-plane under approximation of the contact boundary by isoparametric boundary elements. The comparative efficiency of the algorithm is associated with the reduction in the dimensionality of the boundary value problem being solved and the possibility of utilizing the calculation apparatus of the method of boundary elements to realize the solution.