分布式光纤温度压力传感器设计

为了实现油田井下温度压力的全分布式测量,提出了一种基于光纤散射原理的分布式温度压力测量方法。该方法通过对普通光纤进行封装设计,制作成传感光纤。由于光纤传感器周围流体的温度和压力会对传感光纤内的散射光产生调制作用,通过光纤解调仪解调出光纤拉曼散射参数和布里渊散射频移就能够实现温度和压力的实时在线测量。实验结果表明:设计的分布式光纤温度压力传感器可以实现的温度测量分辨率为0.1 ℃,压力测量分辨率为0.07 MPa。基本满足油田井下温度压力测量的全分布式、实时在线、可靠性高、精度高、抗干扰能力强等要求。     

温度补偿式光纤光栅土压力传感器

针对现有土压力传感器无法实现长期、实时监测的要求,设计了温度补偿式光纤光栅土压力传感器。选用有硬中心的平膜片作弹性元件,选用灵敏度高、体积小、质量轻、易于波分复用和组成传感网络的光纤光栅作敏感元件;同时采用了不受力光栅法进行了温度补偿。经实验测试,该传感器的灵敏度为1.5 nm/M Pa;线性度误差为0.35%;重复性为0.06%;迟滞为2.19%;静态误差为2.21%;这些指标能够满足实际工程应用要求。     

All-fused-silica miniature optical fiber tip pressure sensor

An all-fused-silica pressure sensor fabricated directly onto a fiber tip of 125 microm diameter is described. Simple fabrication steps include only cleaving and fusion splicing. Because no chemical processes are involved, the fabrication is easy, safe, and cost effective. Issues in sensor design and loss analysis are discussed. The sensor has been tested for static pressure response, showing a sensitivity of 2.2 nm/psi, a resolution of 0.01 psi (68.9 Pa), a hysteresis of 0.025%, and capability of operation at temperatures up to 600 deegrees C. This miniature sensor may be suitable for medical diagnostics, environmental monitoring, and other industrial applications.     

带光放大器的分布式光纤拉曼温度系统

 详细阐述了红外双波长带光放大器的分布式光纤拉曼温度系统原理,为了抑制放大器的自发辐射增长、温漂噪声积累、瑞利背向散射光窜扰反斯托克斯背向散射光,采用两条已知温度的曲线和最近测量温度曲线的解调方法,提高了系统的测温精度和稳定性并降低了系统的成本。实验结果与理论分析一致,系统的测温误差在±0.1 ℃内。     

带光放大器的分布式光纤拉曼温度系统

详细阐述了红外双波长带光放大器的分布式光纤拉曼温度系统原理,为了抑制放大器的自发辐射增长、温漂噪声积累、瑞利背向散射光窜扰反斯托克斯背向散射光,采用两条已知温度的曲线和最近测量温度曲线的解调方法,提高了系统的测温精度和稳定性并降低了系统的成本。实验结果与理论分析一致,系统的测温误差在±0.1 ℃内。     

高灵敏度光纤温度传感器

针对深井温度变化小,提出了一种可用于深井温度测量的高灵敏度光纤温度传感器。两根陶瓷插芯从铝管的两端插入构成外腔式光纤法珀干涉仪(EFPI)结构,用螺钉固定插芯,再用高强度的环氧树脂密封该结构,达到防水防尘效果。金属铝和陶瓷插芯具有不同的热膨胀系数,温度的变化将引起EFPI腔长变化,采用高灵敏度光纤白光干涉测量技术,就可以通过测量EFPI腔长获得被测温度。分别在固定温度和不同温度下,对腔长为146.5μm的EFPI光纤温度传感器进行了连续测量。测量结果表明,高灵敏度EFPI光纤温度传感器的腔长-温度灵敏度为260nm/℃,温度测量分辨率为0.002℃。     

光纤传感器低温啁啾现象的分析

介绍了光纤光栅传感原理,依据传感机理制作了两种结构材料的光纤光栅传感器,对它们进行了试验,将试验后的传感数据进行了拟合分析和比对,并对它们在低温环境下产生的啁啾现象进行了分析,验证了采用预拉工艺对解决啁啾现象的可行性。     

带温度补偿的分布式光纤温度传感系统设计

针对分布式光纤温度传感系统(Distributed Optical Fiber Temperature Sensing System,DTS)在线测温精度不高的问题,提出了使用光纤布拉格光栅(Fiber Bragg Grating,FBG)解调仪对DTS进行温度补偿。对不带温度补偿的DTS进行了温度测量和数据分析,证明了进行温度补偿的必要性。设计了带温度补偿的DTS并进行了温度测试。实验结果表明,在使用FBG解调仪对DTS进行温度补偿后,DTS的温度精确度可以达到0.3℃。     

光纤分子背向散射的温度效应及其在 分布光纤温度传感网络上应用 研究的进展

讨论了光纤分子瑞利(Rayleigh)背向散射精细结构谱和光纤分子喇曼(Ra man)背向散射光谱及其温度效应,以及在分布型光纤温度传感网络上应用研究的进展。     

光纤光栅压力传感器的理论建模及实验研究

鉴于压力传感器为工业生产中压力监控的一种必不可少的设备,分析了光纤光栅中心波长与光纤光栅应变之间的关系,阐述了带有硬中心的圆形膜片受到均匀压之后,膜片中心的挠度与压力之间的数学关系。在此基础上设计了圆形膜片作为流体压力转化光纤光栅敏感物理量的元件,并结合辅助元件完成对光纤光栅传感器组装,建立了传感器输入输出之间的线性数学模型。通过实验验证传感器线性度和重复性,运用数学计算得出了光纤光栅压力传感器各项参数,灵敏度Km=-0.658 nm/MPa,初始波长0=1 578.441 nm,为后期传感器稳定性作好了铺垫。     

Dual-source distributed optical fiber sensor for simultaneous temperature and strain measurements

A dual-source distributed optical fiber sensor system with combined Raman and Brillouin scatterings is designed for simultaneous temperature and strain measurements. The optimal Raman and Brillouin signals can be separately obtained by adjusting the powers of the two sources using an optical switch. The temperature and strain can be determined by processing the optimal Raman and Brillouin signals. The experimental result shows that 1.7 ?C temperature resolution and 60-με strain resolution can be achieved at a 24.7-km distance.     

Integration of miniature Fabry-Perot fiber optic sensor with FBG for the measurement of temperature and strain

A sensor has been fabricated by the integration of a fiber Bragg gating sensor (FBGs) with a fiber Fabry-Perot (F-P) sensor fabricated by etching method. In the integrated sensor, the FBG was used to measure temperature, while the fiber Fabry-Perot interferometer sensor (FFPIs) was used for strain measurement. Wavelength decoding for FBG and peak tracking for FFPI was employed for demodulation, respectively. The result showed that the temperature and strain sensitivity for the integrated sensor is ~ 2.7 pm/μεand ~ 9.3 pm/°C, respectively.     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.     

光纤微机电系统压力传感器的理论分析和数值模拟

设计了一种基于微机电系统(MEMS)的光纤压力传感器,证明了光纤MEMS压力传感器在工作状态下可以由法布里_珀罗腔的理论模型解释。推导出了在光纤MEMS压力传感器中硅横膈膜的压力与干涉光强的关系表达式,并对光纤MEMS压力传感器的模型进行了数值模拟,初步确定了在传感器的制作过程中各个物理量的取值。其中腔体半径为300μm、腔体深度为1.42μm、硅横膈膜厚度为23μm,为光纤MEMS压力传感器的加工和制作提供了理论基础。     

Fabry-Perot optical fiber tip sensor for high temperature measurement

We propose a novel Fabry-Perot optical fiber tip sensor for high temperature measurement. The sensor consists of a short section of a special all-silica photonic crystal fiber spliced at one end to a silica single-mode fiber. Because of its all-silica structure, the sensor allows linear and stable measurements of temperature up to 1200 °C with a high sensitivity. The sensor is easy and inexpensive to fabricate and could find wide applications in mechanics, aeronautics, and metallurgy.     

光纤布拉格光栅激光器的传感应用

光纤激光器是一种光束质量好、信噪比高的光源。合理利用光纤激光器中布拉格光栅的传感特点能够制作出性能优良的高灵敏度传感器。光纤激光式传感器按结构基本可分为分布布拉格反射式光纤激光器以及分布反馈式光纤激光器两种。对这两类传感器进行介绍并对这些传感器的优缺点进行分析,最后展望其应用前景。     

All-fiber Tm-doped double-clad fiber laser with multi-mode FBG as cavity

An all-fiber LD-clad-pumped Tm-doped fiber laser was reported, and the CW maximal output power reached 24 W at nearly 1.94 μm. The double-clad Tm-doped fiber had a demission of 25/250 μm with the core NA 0.1 and inner-clad NA 0.46. A matched passive multi-mode FBG acted as the front cavity. Cooling by the water, the 56% high slope efficiency was achieved and threshold was 6.4 W, respected to the launched pump power. At the low power pump, the fiber laser spectrum had only one peak at 1.936 μm. Increasing the launched pump power, the output laser wavelength grew to 3–4 peaks. Because the multi-mode FBG reflectivity was not very high, both ends of the fiber laser had laser output power, and the ratio was nearly 10:1.     

Low-noise and highly stable optical fiber temperature sensor using modified pulse-reference-based compensation technique

We modify the pulse-reference-based compensation technique and propose a low-noise and highly stable optical fiber temperature sensor based on a zinc telluride film-coated fiber tip. The system noise is measured to be 0.0005 dB, which makes it possible for the detection of the minor reflectivity change of the film at different temperatures. The temperature sensitivity is 0.0034 d B/℃, so the resolution can achieve 0.2℃. The maximum difference of the temperature output values of the sensor at 20℃ at different points in time is 0.39℃. The low cost, ultra-small size, high stability, and good repeatability of the sensor make it a promising temperature sensing device for practical application.     

基于F-P腔和FBG的强度调制型光纤液位传感器

设计了一种用于液位测量的光纤F-P(Fabry-Perot)传感器,并从传感头的设计制作出发,讨论了提高传感器输出信号对比度的方法;测量系统采用宽带光源,解调时经FBG(Fiber Bragg Grating)反射和透射得到传感信号和参考信号,对两路光强信号进行联合处理,补偿了光源功率波动和光路损耗变化引起的不良影响,消除了强度调制型传感器的固有缺点,此方法具有结构简单、成本低的优点;该系统可进行连续测量,测量范围为0到200kPa,相当于测量水深0到20m,其分辨力小于1cm(水面高度变化),特别适合对易燃易爆的环境中的油库液位进行测量。     

基于拟合衰减差自补偿的分布式光纤温度传感器

针对斯托克斯光和反斯托克斯光的本质损耗、附加损耗使分布式光纤温度传感器产生测温误差的问题,通过对分布式光纤温度传感器的温度解调原理的研究,提出了拟合斯托克斯光与反斯托克斯光之间衰减差的方法实现温度自补偿,以此减小测温误差.以传感光纤上不同位置的两部分作为参考段和测温段,参考段的光信号作为测温段拟合多阶衰减差和解调温度的参量,通过引入多阶拟合结果解调温度,减小因斯托克斯光和反斯托克斯光的本质损耗、附加损耗导致的温度误差,实现温度的初步修正.改变光纤上同一位置的温度,取3组不同温度值及对应信号值计算引入拟合衰减差前后的瑞利噪声,分析了瑞利噪声与光纤长度和温度的关系,通过引入拟合衰减差消除瑞利噪声,减小了斯托克斯光和反斯托克斯光的本质损耗、附加损耗导致的瑞利噪声误差,实现温度的再次修正.分析比较多阶衰减差拟合结果对测温误差以及消除瑞利噪声的影响,获得最优拟合阶次.在拟合因参考段的附加损耗而导致的测温段的附加误差后,通过拟合结果进行温度补偿,完成了最终温度修正.实验结果表明,在30-90℃,引入一阶线性拟合结果的温度修正效果最好,经过三次修正后,测温误差从10.50℃降低至0.90℃.