Conformational interconversions in [2]catenanes containing a wide rigid bis(p-benzyl)methyl spacer

The conformational interconversions of four [2]catenanes (1-4) containing a dibenzo-34-crown-10 ether (BPP34C10) interlocked with rings containing two 4,4'-dipyridiniums tethered by 1,3-bis(ethyloxy)phenyl and bis(p-benzyl)methyl spacers have been studied by VT 1H NMR spectroscopy. Symmetrically placed blocking groups on thickened tethers enabled either pathway for circumrotation of the BPP34C10 between isoenergetic sites to be blocked. On the basis of chemical shifts of the BPP34C10, its internal p-hydroquinone forms pi-pi-stacking interactions with only one 4,4'-dipyridinium ring at a time. The activation barrier for migration along either open tether was approximately 11.5 kcal/mol. This study demonstrates an ability to select the pathway for conformational interconversions in these [2]catenanes containing the rigid bis(p-benzyl)methyl tether and the lowering the barrier for interconversion through destabilization of the ground state structures.     

Path selection for conformational interconversions in [2]catenanes

[strucure: see text]The conformational interconversions of several [2]catenanes containing a dibenzo-34-crown-10 ether (BPP34C10) interlocked with rings containing two 4,4'-dipyridyls tethered by different aryl spacers have been studied. Blocking groups on the tethers enabled the two pathways for circumrotation of the BPP34C10 to be open or blocked. The activation barrier for migration along the open tethers varied from 11 to 13 kcal/mol. This study demonstrates an ability to select the pathway for conformational interconversions in [2]catenanes.     

Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Cyclohexene-4-carbaldehyde in the Synthesis of 4-(Cyclohex-3-enyl)-Substituted 4 H -Chromenes, 4 H -Thiopyrans, 1,4,5,6,7,8-Hexahydroquinolines, 1,4-Dihydropyridines, Pyridines, and 6,7-Dihydro-5 H -[1]pyrindines

Cyclocondensation of cyclohexene-4-carbaldehyde in the presence of morpholine with CH acids [malonodinitrile, dimedone, 1,3-cyclohexanedione, ethyl acetoacetate, cyanothioacetamide, β-aminophenol, resorcinol, and 4-(cyclopent-1-enyl)morpholine] yields the corresponding 4-(cyclohex-3-enyl)-substituted 4H-chromenes, 4H-thiopyrans, 1,4,5,6,7,8-hexahydroquinolines, 1,4-dihydropyridines, and 6,7-dihydro-5H-[1]pyrindines. __________ Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 10, 2005, pp. 1612–1619. Original Russian Text Copyright ? 2005 by Dyachenko.     

Substituted ethyl 2-acyl-3-amino-6-methylthieno[2,3-b]pyridine-4-carboxylates as synthons for novel heterocycles

The triethylamine-catalyzed reaction of 4-substituted ethyl 2-acyl-3-amino-6-methylthieno[2,3-b]pyridine-4-carboxylates IIIa-h with 2,2,6-trimethyl-4H-1,3-dioxin-4-one IV gave 4-substituted ethyl 3-acetyl-2-hydroxy-7-methylthieno[2,3-b:4,5-b′]dipyridine-9-carboxylates Va-h. Some of the thienodipyridines ( V ) reacted with excess IV to give 5-substituted ethyl 3-acetyl-4,8-dimethyl-2-oxo-2H-pyrano[2,3-b]-pyrido[3′,2′:4,5]thieno[2,3-e]pyridine-10-carboxylates VI .     

3,3-Dimethyl-2,3,5,6-tetrahydroimidazo[2,1-b][1,3,4]thiazasilole and Its Derivatives with Five-Coordinate Silicon Atom

Previously unknown 3,3-dimethyl-2,3,5,6-tetrahydroimidazo[2,1-b][1,3,4]thiazasilole and its zwitterionic derivatives containing five-coordinate silicon atom, namely 7-substituted 3,3-dimethyl-2,3,5,6-tetrahydroimidazo[2,1-b][1,3,4]thiazasilol-4-ium chlorides, have been synthesized by reaction of 1,3-bis(trimethylsilyl)tetrahydroimidazole-2-thione with chloro(chloromethyl)dimethylsilane and subsequent transformations of the products.     

Cationic ring‐opening polymerization of novel 1,3‐dehydroadamantanes with various alkyl substituents: Synthesis of thermally stable poly(1,3‐adamantane)s

Cationic ring‐opening polymerizations of 5‐alkyl‐ or 5,7‐dialkyl‐1,3‐dehydroadamantanes, such as 5‐hexyl‐ ( 4 ), 5‐octyl‐ ( 5 ), 5‐butyl‐7‐isobutyl‐ ( 6 ), 5‐ethyl‐7‐hexyl‐ ( 7 ), and 5‐butyl‐7‐hexyl‐1,3‐dehydroadamantane ( 8 ), were carried out with super Brønsted acids, such as trifluoromethanesulfonic acid or trifluoromethanesulfonimide in CH₂Cl₂ or n‐heptane. The ring‐opening polymerizations of inverted carbon–carbon bonds in 4–8 proceeded to afford corresponding poly(1,3‐adamantane)s in good to quantitative yields. Poly( 4–8 )s possessing alkyl substituents were soluble in 1,2‐dichlorobenzene, although a nonsubstituted poly(1,3‐adamantane) was not soluble in any organic solvent. In particular, poly( 8 ) exhibited the highest molecular weight at around 7500 g mol^?1 and showed excellent solubility in common organic solvents, such as THF, CHCl₃, benzene, and hexane. The resulting poly( 4–8 )s containing adamantane‐1,3‐diyl linkages showed good thermal stability, and 10% weight loss temperatures (T₁₀) were observed over 400 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4111–4124     

Selenium heterocycles. XXIX. Reaction of substituted 2-thioxo-1,3-thiaselenoles with ethyl diazoacetate,ethyl azidoformate and phenyl azide

Reaction of 5-substituted 2-thioxo-1,3-thiaselenoles with ethyl diazoacetate, phenyl azide and ethyl azidoformate afforded 2-substituted ω-carbethoxy-1,4-thiaselenafulvenes (II) , 5-substituted 2-phenylimino-1,3-thiaselenoles (IV) and 5-substituted 2-carbethoxyimino-1,3-thiaselenoles (V) , respectively. The structure of these compounds were confirmed by spectroscopic methods and chemical analysis.     

Phosphine-mediated diverse reactivity of γ-substituted allenoates with aldehydes: syntheses of highly functionalized chromans and (E,E)-1,3-dienes

As an extension of our previous studies, the phosphine-mediated diverse reactivity of γ-substituted allenoates with aldehydes has been further investigated. Under the catalysis of tris(p-chlorophenyl)phosphine (20 mol %), ethyl 2,3-pentadienoate, namely ethyl γ-methyl allenoate, readily undergoes a formal [4+2] annulation with dual-functional salicylaldehydes, giving highly functionalized chromans in 47-97% yields. This transformation represents a novel reactivity pattern of electron-deficient allenes with aldehydes. Conversely, when the γ substituent in the allenoate changes from methyl to benzyl or the employed phosphine from weakly nucleophilic triarylphosphine to strongly trialkylphosphine, the phosphine-mediated reactivity of γ-substituted allenoates with aldehydes will be steered to a stoichiometric olefination reaction, leading to the highly stereoselective formation of (E,E)-1,3-dienes. Thus, under the mediation of equivalent PPh₃, ethyl γ-benzyl allenoate readily condenses with salicylaldehydes, affording (E,E)-1,3-dienes in 34-84% yields; with strongly nucleophilic 1,3,5-triaza-7-phosphaadamantane (PTA) used instead of PPh₃, ethyl γ-methyl allenoate also gives the corresponding olefination products in 32-73% yields with reactive aromatic aldehydes. On the basis of our previous studies and current work, these chemical transformations of γ-substituted allenoates with aldehydes, as well as their diverse reactivity, have been mechanistically rationalized.     

Reactions of 1,3-bis(ω-bromoalkyl)-6-methyluracils with 2-(dialkylamino)ethylphosphonates and 2-(dialkylamino)ethyl phosphates

1,3-Bis(4-bromobutyl)-6-methyluracil reacts with diethyl 2-(dimethylamino)ethylphosphonate to form a bisquaternary ammonium salt, whereas the reaction of 1,3-bis-(6-bromohexyl)-6-methyluracil with diethyl 2-(diethylamino)ethyl phosphate gives 1,3-bis-[(6-diethoxyphosphoryloxy)hexyl]-6-methyluracil and 1,1,4,4-tetraethylpiperazinium dibromide. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1130–1132, June, 2000.     

Synthesis of 4- and 5-substituted 1-hydroxyimidazoles through directed lithiation and metal-halogen exchange.

Electrophiles were introduced regioselectively at the 5-position of 1-(benzyloxy)imidazole by lithiation at C-5 after protection of C-2 with a chloro or a trimethylsilyl group. Subsequent treatment with an electrophile afforded 5-substituted 1-(benzyloxy)-2-chloroimidazoles 8-13 and 5-substituted 1-(benzyloxy)imidazoles 3-5, the 2-(trimethylsilyl) group being lost during workup. Electrophiles were introduced regioselectively at the 4-position of 1-(benzyloxy)imidazole by bromine-lithium exchange of 4-bromo-2-chloro-1-(benzyloxy)imidazoles, protected at C-5 with chloro or trimethylsilyl groups, followed by reaction with an electrophile. The 5-(trimethylsilyl) group was removed via base-catalyzed desilylation. Chlorine at C-2 and O-benzyl groups were removed by palladium-catalyzed hydrogenolysis.     

Structural and co-conformational effects of alkyne-derived subunits in charged donor-acceptor [2]catenanes

Four donor-acceptor [2]catenanes with cyclobis(paraquat-p-phenylene) (CBPQT4+) as the pi-electron-accepting cyclophane and 1,5-dioxynaphthalene (DNP)-containing macrocyclic polyethers as pi-electron donor rings have been synthesized under mild conditions, employing Cu+-catalyzed Huisgen 1,3-dipolar cycloaddition and Cu2+-mediated Eglinton coupling in the final steps of their syntheses. Oligoether chains carrying terminal alkynes or azides were used as the key structural features in template-directed cyclizations of [2]pseudorotaxanes to give the [2]catenanes. Both reactions proceed well with precursors of appropriate oligoether chain lengths but fail when there are only three oxygen atoms in the oligoether chains between the DNP units and the reactive functional groups. The solid-state structures of the donor-acceptor [2]catenanes confirm their mechanically interlocked nature, stabilized by [pi...pi], [C-H...pi], and [C-H...Omicron] interactions, and point to secondary noncovalent contacts between 1,3-butadiyne and 1,2,3-triazole subunits and one of the bipyridinum units of the CBPQT4+ ring. These contacts are characterized by the roughly parallel orientation of the inner bipyridinium ring system and the 1,2,3-triazole and 1,3-butadiyne units, as well as by the short [pi...pi] distances of 3.50 and 3.60 A, respectively. Variable-temperature 1H NMR spectroscopy has been used to identify and quantify the barriers to the conformationally and co-conformationally dynamic processes. The former include the rotations of the phenylene and the bipyridinium ring systems around their substituent axes, whereas the latter are confined to the circumrotation of the CBPQT4+ ring around the DNP binding site. The barriers for the three processes were found to be successively 14.4, 14.5-17.5, and 13.1-15.8 kcal mol-1. Within the limitations of the small dataset investigated, emergent trends in the barrier heights can be recognized: the values decrease with the increasing size of the pi-electron-donating macrocycle and tend to be lower in the sterically less encumbered series of [2]catenanes containing the 1,3-butadiyne moiety.     

Synthesis of C60/[10]CPP-Catenanes by Regioselective,Nanocapsule-Templated Bingel Bis-Addition

The addition of two unsymmetric malonate esters to the Buckminster fullerene C₆₀ can lead to 22 spectroscopically distinguishable isomeric products and therefore represents a formidable synthesis challenge. In this work, we achieve 87 % selectivity for the formation of a single (in,out-trans-3) isomer by combining three approaches: (i) we use a starting material, in which the two malonates are covalently connected (tether approach); (ii) we form the strong supramolecular complex of C₆₀ with the shape-persistent [10]CPP macrocycle (template approach) and (iii) we embed this complex further within a self-assembled nanocapsule (shadow mask approach). Variation of the spacer chain shed light on the limitations of the approach and the ring dynamics in the unusual [2]catenanes were studied in silico with atomistic resolution. This work significantly widens the scope of mechanically interlocked architectures comprising cycloparaphenylenes (CPP).     

Ruthenium-catalysed synthesis of 2- and 3-substituted quinolines from anilines and 1,3-diols

A straightforward synthesis of substituted quinolines is described by cyclocondensation of anilines with 1,3-diols. The reaction proceeds in mesitylene solution with catalytic amounts of RuCl(3)·xH(2)O, PBu(3) and MgBr(2)·OEt(2). The transformation does not require any stoichiometric additives and only produces water and dihydrogen as byproducts. Anilines containing methyl, methoxy and chloro substituents as well as naphthylamines were shown to participate in the heterocyclisation. In the 1,3-diol a substituent was allowed in the 1- or the 2-position giving rise to 2- and 3-substituted quinolines, respectively. The best results were obtained with 2-alkyl substituted 1,3-diols to afford 3-alkylquinolines. The mechanism is believed to involve dehydrogenation of the 1,3-diol to the 3-hydroxyaldehyde which eliminates water to the corresponding α,β-unsaturated aldehyde. The latter then reacts with anilines in a similar fashion as observed in the Doebner-von Miller quinoline synthesis.     

Rational Design and Integrative Assembly of Heteromeric Metalla[2]Catenanes Featuring Cp*Ir/Rh Fragments

We report a design strategy for integrative assembly of heteromeric [2]catenanes. The design focuses on the shape and functional group match of two different metalla-rectangles. A series of dipyridyl ligands with different lengths, widths and functional groups were designed and used for assembly experiments. Six heteromeric [2]catenanes were obtained both by direct mixture of two pre-assembled metalla-rectangles and one-pot three-component self-assembly. Multiple analytic methods were employed to characterize the catenanes, including single crystal X-ray diffraction analysis, NMR spectroscopy, mass spectroscopy and elemental analysis.     

Stereocontrolled intramolecular meta-arene–alkene photocycloaddition reactions using chiral tethers: efficiency of the tether derived from 2,4-pentanediol

Photochemical reactions of substrates consisting of phenyl and vinyl groups, which are tethered with a chiral diol, resulted in intramolecular meta-arene–alkene cycloaddition; the reaction efficiency as well as the stereoselectivity was studied. 1,3-Butanediol, 2-substituted 1,3-propanediols, 2-methyl-2,4-penetanediol, and 2,6-dimethyl-3,5-heptanediol were employed as tethers, and the results are compared with those obtained with 2,4-pentanediol (PD) tether, which are known to show high stereoselectivity and moderate efficiency. All the reactions with the lower analogues were less efficient than with PD, although one of the butanediol-tethered reactions afforded a single stereoisomer as PD did. The dimethylheptanediol tether showed similar efficiency but lower stereoselectivity than PD. The results suggest that the PD tether has an optimized structure having a proper flexibility.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

多元酚的氰乙基和乙氧羰乙基化 I.

In the presence of alkoxide, resorcinol, methyl and nitro substituted resorcinol give C-polycyanoethyl-substituted products. When the 2-, 4- and 6-positions were occupied the O-cyanoethylation could occur. In the reaction of 2-nitroresorcinol with ethyl acrylate two β-carbethoxyethyl groups are introduced in a similar way to the 4-and 6-positions. The carbethoxyethylation products of resorcinol and 2-methylresorcinol lose ethyl alcohol during distillation giving the corresponding lactones.     

The Nature of the [TTF].+⋅⋅⋅[TTF].+ Interactions in the [TTF]22+ Dimers Embedded in Charged [3]Catenanes: Room‐Temperature Multicenter Long Bonds

The properties of tetrathiafulvalene dimers ([TTF]₂²⁺) and the functionalized ring‐shaped bispropargyl (BPP)‐functionalized TTF dimers, [BPP–TTF]₂²⁺, found at room temperature in charged [3]catenanes, were evaluated by M06L calculations. The results showed that their isolated [TTF]₂²⁺ and [BPP–TTF]₂²⁺ dimers are energetically unstable towards dissociation. When enclosed in the 4⁺‐charged central cyclophane ring of charged [3]catenanes (CBPQT⁴⁺), [TTF]₂²⁺ and [BPP–TTF]₂²⁺ dimers are also energetically unstable with respect to leaving the CBPQT⁴⁺ ring; since the barrier for the exiting process is only about 3 kcal mol^?1, that is, within the reach of thermal energies at room temperature (neutral [TTF]₂⁰ dimers are stable within the CBPQT⁴⁺ ring). However, the [BPP–TTF]₂²⁺ dimers in charged [3]catenanes cannot exit, because this would imply breaking the covalent bonds of the BPP–TTF⁺ macrocycle. Finally, it was shown that the [TTF]₂²⁺, [BPP–TTF]₂²⁺ dimers, and charged [3]catenanes are energetically stable in solution and in crystals of their salts, in the first case due to the interactions with the solvent, and in the second case mostly due to cation–anion interactions. In these environmental conditions at room temperature the TTF units of the [BPP–TTF]₂²⁺ dimers make short contacts, thus allowing their SOMO orbitals to overlap: a room‐temperature multicenter long bond is formed, similar to those previously found in other [TTF]₂²⁺ salts and their solutions.     

Quinolone analogues 2. A facile synthesis of novel 3‐substituted 1‐alkyl‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalines

The reaction of the 2‐(1‐alkylhydrazino)‐6‐chloroquinoxaline 4‐oxides 1a,b with diethyl acetone‐dicarboxylate or 1,3‐cyclohexanedione gave ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐1,5‐dihydropyridazino[3,4‐b]quinoxaline‐3‐carboxylates 5a,b or 6‐alkyl‐10‐chloro‐1‐oxo‐1,2,3,4,6,12‐hexahydroquinoxalino[2,3‐c]cinnolines 7a,b , respectively. Oxidation of compounds 5a,b with nitrous acid afforded the ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐4‐hydroxy‐1,4‐dihydropyridazino‐[3,4‐b]quinoxaline‐4‐carboxylates 9a,b , whose reaction with base provided the ethyl 2‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)acetates 6a,b , respectively. On the other hand, oxidation of compounds 7a,b with N‐bromosuccinimide/water furnished the 4‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)butyric acids 8a,b , respectively. The reaction of compound 8a with hydroxylamine gave 4‐(7‐chloro‐4‐hydroxyimino‐1‐methyl‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)‐butyric acid 12 .