Orbital interaction mechanisms of conductance enhancement and rectification by dithiocarboxylate anchoring group

We study computationally the electron transport properties of dithiocarboxylate terminated molecular junctions. Transport properties are computed self-consistently within density functional theory and nonequilibrium Green's functions formalism. A microscopic origin of the experimentally observed current amplification by dithiocarboxylate anchoring groups is established. For the 4,4'-biphenyl bis(dithiocarboxylate) junction, we find that the interaction of the lowest unoccupied molecular orbital (LUMO) of the dithiocarboxylate anchoring group with LUMO and highest occupied molecular orbital (HOMO) of the biphenyl part results in bonding and antibonding resonances in the transmission spectrum in the vicinity of the electrode Fermi energy. A new microscopic mechanism of rectification is predicted based on the electronic structure of asymmetrical anchoring groups. We show that the peaks in the transmission spectra of 4'-thiolato-biphenyl-4-dithiocarboxylate junction respond differently to the applied voltage. Depending upon the origin of a transmission resonance in the orbital interaction picture, its energy can be shifted along with the chemical potential of the electrode to which the molecule is more strongly or more weakly coupled.     

Optical and Electrical Properties of Triphenylamine Derivatives for Dye-sensitized Solar Cells and Designing of Novel Molecule

With density functional theory(DFT) method, the optimization of molecular configurations and the calculation of frontier molecular orbitals were achieved for triphenylamine(TPA)-based dye-sensitized solar cell materials at the B3LYP/6-31G(d, p) level. Time-dependent density functional theory(TD-DFT) was applied to calculating the probability of the transition from the ground state to the excited state. And UV-Vis absorption spectra were derived with Franck-Condon approximation. The conjugation length, substitution groups and spatial effects show a slight influence on the dihedral angle of the TPA group. The increase of conjugation length may cause a smaller energy gap as well as a higher highest occupied molecular orbital(HOMO) and a lower lowest unoccupied molecular orbital (LUMO). The introduction of methoxyl group and TPA group could lower the energy gap while the HOMO and LUMO were elevated in energy.     

Conduction mechanism of Aviram-Ratner rectifiers with single pyridine-sigma-C(60) oligomers

We present the electron transport of pyridyl aza[60]fulleroid oligomers, abbreviated as C(60)NPy, which is based on the donor-barrier-acceptor (D-sigma-A) architecture, at a single molecular scale using scanning tunneling microscopy. A rectifying effect is observed in the current-voltage characteristics. The theoretical calculation shows that the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) are well localized either on the Py moiety (donor) or on the C(60) moiety (acceptor), indicating the sigma-bridge decouples the LUMO and the HOMO of the donor and the acceptor, respectively. This structure accords well with the unimolecular rectifying model proposed by Aviram and Ratner [Chem. Phys. Lett. 1974, 29, 277]. The mechanism of the rectifying effect is understood by analyzing in detail the electron transport through energy levels of the donor and the acceptor of the C(60)NPy molecules. By directly comparing the experimental conductance peaks and the calculated density of states of the C(60)NPy, we find that the observed rectification is attributed to the asymmetric positioning of the LUMOs and the HOMOs of both sides of the acceptor and the donor of the C(60)NPy molecules with respect to the Fermi level of the electrodes. When a main voltage drop is over the molecule-electrode vacuum junction but a small fraction over the molecule itself, the shift of the energy levels between the donor and the acceptor will be small. This behavior deviates from the original proposal by Aviram and Ratner in which a large shift of the energy level is expected.     

外电场下氮化铝分子结构和光谱研究

以6-311＋G(2DF)为基函数, 采用密度泛函B3P86的方法研究了外电场作用下氮化铝(AlN)基态分子的几何结构、HOMO能级、LUMO能级、能隙及谐振频率. 结果表明, 外电场的大小和方向对AlN分子基态的这些性质有明显影响. 在所加的电场范围内, 随着外电场的增大分子键长减小, 谐振频率增大, 总能量升高, 在F＝0.02 a.u.时能量达到最大, 为－297.4217 a.u., 此后继续增大电场强度, 系统总能量则开始降低; EH 和EL 随着电场的增加均逐渐增大, 在 F＝0.01 a.u.时, EH 和EL均取得最大值, 分别为－0.2776和－0.0828 a.u., 随着电场的继续增大, 能级EH和EL均逐渐减小, 而能隙在外电场增大的过程中始终处于减小趋势.     

Electron rectification through donor-acceptor-heterocyclics connected to cumulenic bridge: a computational study

Density Functional Theory (DFT) calculations and Frontier Molecular Orbital (FMO) analysis have been carried out at B3LYP/6-31G(d,p) level of theory on some Donor-Bridge-Acceptor (D-B-A) molecules for their electrical rectification behavior. The donor-acceptor-heterocyclics (D/A-heterocyclics) (namely thiophene, furan and pyrrole rings) are attached as donor and acceptors to the two ends of cumulenic bridge. FMO analysis indicates that the molecules having even number of double bonds in the bridge, possess a complete localization of the MOs i.e., the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) are localized on the donor and the acceptor side of the molecules respectively, and LUMO+1 is localized on the donor side, where as in case of odd number of double bonds in the bridge, both the HOMO and LUMOs are delocalized all over the molecule. The Potential Drop (PD) in the former case decreases as the number of double bonds increases in the bridge and due to the presence of the mutually orthogonal and noninteracting π-clouds, they can act as molecular rectifiers. For the molecules with the odd number of double bonds due to the low-lying LUMO delocalized all over the molecule, may find application as molecular wires in molecular electronics circuits.      

给电子基团对吲哚染料电子结构和吸收光谱的影响

利用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT), 分别基于B3LYP和PBE1PBE方法研究了一系列含有不同给电子基团的吲哚染料分子(ID1-ID3)的电子结构和吸收光谱性质. 重点比较了不同电子给体对染料的分子结构、吸收光谱以及其在电池中的光伏性能的影响. 结果表明从ID1、ID2到ID3, 随着电子给体中苯环数目的增加, 吲哚分子上的共轭效应逐渐增大, 导致吲哚分子最高占据分子轨道-最低未占据分子轨道(HOMO-LUMO)之间的能隙变窄, 分子的吸收光谱发生红移. 染料分子的吸收光谱和LUMO能级分别影响染料的吸光效率和光电转化过程中电子的注入过程, 从而使其二者成为决定电池光伏性能的重要参数. 综合考虑上述两个参数对电池性能的贡献, 通过理论研究证实, 在ID1-ID3系列染料中, ID3具有较长的吸收谱带、较大的分子消光系数和合适的LUMO能级, 从而表现出最为优越的光伏性能, 这与实验得出的结论很好地吻合.     

Charge transmission through a molecular wire: the role of terminal sites for the current-voltage behavior

The current-voltage and the conductance-voltage characteristics are analyzed for a particular type of molecular wire embedded between two electrodes. The wire is characterized by internal molecular units where the lowest occupied molecular orbital (LUMO) levels are positioned much above the Fermi energy of the electrodes, as well as above the LUMO levels of the terminal wire units. The latter act as specific intermediate donor and acceptor sites which in turn control the current formation via the superexchange and sequential electron transfer mechanisms. According to the chosen wire structure, intramolecular multiphonon processes may block the superexchange component of the interelectrode current, resulting in a negative differential resistance of the molecular wire. A pronounced current rectification appears if (i) the superexchange component dominates the electron transfer between the terminal sites and if (ii) the multiphonon suppression of distant superexchange charge hopping events between those sites is nonsymmetric.     

Toward a rational design of poly(2,7-carbazole) derivatives for solar cells

On the basis of theoretical models and calculations, several alternating polymeric structures have been investigated to develop optimized poly(2,7-carbazole) derivatives for solar cell applications. Selected low band gap alternating copolymers have been obtained via a Suzuki coupling reaction. A good correlation between DFT theoretical calculations performed on model compounds and the experimental HOMO, LUMO, and band gap energies of the corresponding polymers has been obtained. This study reveals that the alternating copolymer HOMO energy level is mainly fixed by the carbazole moiety, whereas the LUMO energy level is mainly related to the nature of the electron-withdrawing comonomer. However, solar cell performances are not solely driven by the energy levels of the materials. Clearly, the molecular weight and the overall organization of the polymers are other important key parameters to consider when developing new polymers for solar cells. Preliminary measurements have revealed hole mobilities of about 1 x 10(-3) cm2 x V(-1) x s(-1) and a power conversion efficiency (PCE) up to 3.6%. Further improvements are anticipated through a rational design of new symmetric low band gap poly(2,7-carbazole) derivatives.     

Electrochemical and solvatochromic study of cyclopalladated complexes

The electrochemistry and the optical absorption properties of a series of cyclopalladated complexes are reported. Variation of the cyclometallated ligand has been performed (azobenzene, 2-phenylpyridine and benzo[h]quinoline) as well as variation of the ancillary ligand (acetylacetone and hexafluoroacetylacetone). Results have confirmed that the LUMO energy levels of these complexes is mainly distributed on the cyclometallated ligand. High electronegativity of the fluorinated groups has a weak influence on the electrochemical and absorption properties of the complexes, except for the benzo[h]quinoline for which its planar and comparatively more aromatic character lead to a partial delocalisation of the LUMO energy level.     

Binding of propene on small gold clusters and on Au(111): simple rules for binding sites and relative binding energies

We use density functional theory (DFT) to investigate the bonding of propene to small gas-phase gold clusters and to a Au(111) surface. The desorption energy trends and the geometry of the binding sites are consistent with the following set of rules. (1) The bond of propene to gold is formed by donation of electron density from the highest occupied molecular orbital (HOMO) of propene to one of the low-lying empty orbitals [denoted by LUMO1, LUMO2, em leader (LUMO-lowest unoccupied molecular orbital)] of the gold cluster. (2) Propene binds to a site on the Au cluster where one of the low-lying LUMOs protrudes in the vacuum. Different isomers (same cluster, but different binding sites for propene) correspond to sites where different low-lying LUMOs protrude in space. (3) The desorption energy of the lowest energy isomer correlates with the energy of the lowest empty orbital of the cluster; the lower the energy of that LUMO, the higher the desorption energy. (4) If the lowest-lying LUMO protrudes into space at two nonequivalent sites at the edge of a cluster, propene binds more strongly to the site with the lowest coordination. These rules are consistent with the calculated bond energies and geometries for [Au(n)(C(3)H(6))](q), for n=1-5 and n=8 and q=-1, 0, +1. Based on them we have made a number of predictions that have been confirmed by DFT calculations. The bond of propene to gold is strengthened as the net charge of the cluster varies from -1, to zero, to +1. Compared to a gas-phase cluster, a cluster on a support binds propene more strongly if the support takes electron density from the cluster (e.g., a Au cluster on a gold surface) and more weakly if the support donates electron density to the cluster (e.g., a Au cluster on an oxygen vacancy on an oxide surface).     

Fine-tuning the molecular energy levels by incorporating thiophene units onto the π-backbone of core-expanded naphthalene diimides

A series of core-expanded naphthalene diimides (NDI-DTYM) and thiophene-based derivatives (1a-c) were designed and synthesized to investigate the relationship between molecular structures and the highest occupied molecular orbital (HOMO) energy levels but has little impact on the lowest unoccupied molecular orbital (LUMO) energy levels. The results demonstrated that increasing the number of thiophene units can gradually elevate the HOMO energy levels but had little impact on the LUMO energy levels. The n-channel organic field-effect transistors (OFETs) based on 1b and 1c have demonstrated that these almost unchanged LUMO energy levels are proper to transport electrons.     

Electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene: chemical tuning for air stability in OFETs

We have synthesized new electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene as an active material for the fabrication of solution-processable n-type organic field-effect transistors (OFETs). The influence of the number of dicyanomethylene groups as well as the position of hexyl groups was investigated in detail by performing photophysical and electrochemical measurements. Results revealed that the optical energy gaps and the lowest unoccupied molecular orbital (LUMO) energy levels can be controlled by changing the number of dicyanomethylene groups. In contrast, the position of hexyl groups has little influence on molecular electronic properties. X-ray diffraction and atomic force microscopy measurements revealed that spin-coated thin films of the new compounds had a crystalline structure. OFETs based on these compounds were evaluated in vacuum and air-exposed conditions, and the electron mobility of up to 0.016 cm(2) V(-1) s(-1) was achieved. Furthermore, we demonstrated that the air stability of the OFETs depends on the LUMO energy level of the compounds.     

The effect of ligand substitution and water co-adsorption on the adsorption dynamics and energy level matching of amino-phenyl acid dyes on TiO2

We perform a comparative theoretical analysis of adsorption of dyes NK1 (2E,4E-2-cyano-5-(4-dimethylaminophenyl)penta-2,4-dienoic acid) and NK7 (2E,4E-2-cyano-5-(4-diphenylaminophenyl)penta-2,4-dienoic acid) on clean and water-covered anatase (101) surfaces of TiO(2). Ligand substitution away from the anchoring group changes the energy level matching between the dye's LUMO and the oxide's conduction band. Monodentate binding and bidentate binding configurations of the dyes to TiO(2) are found to have similar adsorption energies even though the injection from the bidentate mode is found to dominate. Water has a strong effect on adsorption, inducing deprotonation and affecting strongly and differently between the dyes the energy level matching, leading to a shut-off of the injection from NK7 of bidentate adsorption configuration. Ab initio molecular dynamics simulations show a strong effect of nuclear motion on energy levels, specifically, increasing the driving force for injection in the monodentate regime.     

带有噻吩侧基的有机硼小分子电子受体光伏材料

有机小分子电子受体材料的侧基能够影响异质结有机太阳能电池的给体/受体匹配和器件性能。我们设计并合成了一个硼原子带有噻吩侧基的有机硼小分子(MBN-Th)。该分子的LUMO离域在整个骨架上,HOMO定域在中心核上,其独特的电子结构使该分子具有两个强的吸收峰(波长分别为490和726nm),因此分子具有宽的吸收光谱和强的太阳光吸收能力。与苯基侧基相比,噻吩侧基使分子的HOMO能级下移0.1 eV,LUMO能级保持不变,进而引起分子带隙减小和吸收光谱蓝移20nm。基于该有机硼小分子受体材料的异质结有机太阳能电池,实现了4.21%的能量转化效率和300–850nm的宽响应光谱。实验结果表明,硼原子上的噻吩侧基是调控有机硼小分子光电性质的有效方法,可以用于有机硼小分子受体材料的设计。     

Correlation between electron capture negative chemical ionization mass spectrometric fragmentation and calculated internal energies for polychlorinated biphenyls

Correlationbse tween molecular structure and fragmentation observed in electron capture negative chemical ionization mass spectra (moderator gas = methane) of 49 selected tetrachlorinated, pentachlorinated, and hexachlorinated biphenyls have been investigated by using molecular modeling. The semiempirical general molecular orbital program MOPAC was used to calculate molecular properties for biphenyl and the 209 polychlorinated biphenyls. The mass spectrometric ionization and fragmentation processes were found to be linked to the number of chlorine atoms present on the biphenyl, and to the number of those chlorine atoms in the ortho (2, 2′, 6, and 6′) positions. The intensity of molecular ions increased with the number of chlorine atoms present, but this was counteracted by enhanced fragmentation as the number of ortho position chlorine atoms increased. The molecular parameters that were most closely linked with the number of ortho chlorine atoms were the twist angle between the phenyl rings and the energy of the lowest unoccupied molecular orbital (LUMO). It is suggested that fragmentation occurs when the energy of the ionizing electron exceeds the energy difference between the LUMO and LlJMO + 1 orbitals.     

Density functional theory/time-dependent DFT studies on the structures, trend in DNA-binding affinities, and spectral properties of complexes [Ru(bpy)2(p-R-pip)]2+ (R = -OH, -CH3, -H, -NO2)

Studies on the electronic structures and trend in DNA-binding affinities of a series of Ru(II) complexes [Ru(bpy)2(p-R-pip)]2+ (bpy = 2,2-bipyridine; pip = 2-phenylimidazo[4,5-f] [1,10]-phenanthroline; R = -OH, -CH3, -H, -NO2) 1-4 have been carried out, using the density functional theory (DFT) at the B3LYP/LanL2DZ level. The electronic absorption spectra of these complexes were also investigated using time-dependent DFT (TDDFT) at the B3LYP//LanL2DZ/6-31G level. The computational results show that the substituents on the parent ligand (pip) have a significant effect on the electronic structures of the complexes, in particular, on the energies of the lowest unoccupied molecular orbital (LUMO) and near some unoccupied molecular orbitals (LUMO+x, x = 1-4). With the increase in electron-withdrawing ability of the substituent in this series, the LUMO+x (x = 0-4) energies of the complexes are substantially reduced in order, for example, epsilon(LUMO)(1) approximately epsilon(LUMO)(2) > epsilon(LUMO)(3) > epsilon(LUMO)(4), whereas the pi-component populations of the LUMO+x (x = 0-4) are not substantially different. Combining the consideration of the bigger steric hindrance of complex 2, the trend in DNA-binding affinities (K(b)) of the complexes, that is, K(b)(2) < K(b)(1) < K(b)(3) < K(b)(4) can be reasonably explained. In addition, the experimental singlet metal-to-ligand charge transfer ((1)MLCT) spectra of these complexes can be well simulated and discussed by the TDDFT calculations.     

Comparative study of Li, Na, and K adsorptions on graphite by using ab initio method

A comprehensive study has been conducted to compare the adsorptions of alkali metals (including Li, Na, and K) on the basal plane of graphite by using molecular orbital theory calculations. All three metal atoms prefer to be adsorbed on the "middle hollow site" above a hexagonal aromatic ring. A novel phenomenon was observed, that is, Na, instead of Li or K, is the weakest among the three types of metal atoms in adsorption. The reason is that the SOMO (single occupied molecular orbital) of the Na atom is exactly at the middle point between the HOMO and the LUMO of the graphite layer in energy level. As a result, the SOMO of Na cannot form a stable interaction with either the HOMO or the LUMO of the graphite. On the other hand, the SOMO of Li and K can form a relatively stable interaction with either the HOMO or the LUMO of graphite. Why Li has a relatively stronger adsorption than K on graphite has also been interpreted on the basis of their molecular-orbital energy levels.     

8-羟基喹啉铁配合物对锐钛矿型TiO2(101)表面的敏化机理

用密度泛函理论和DMol3程序包对锐钛矿型TiO2(101)表面复合三(8-羟基喹啉-5-羧酸)铁的敏化机理进行了研究. 计算结果表明, 该染料敏化剂经式结构的HOMO(最高占据分子轨道)-LUMO(最低未占据分子轨道)能隙非常小, 很容易受到激发; TiO2纳米晶吸附染料后, HOMO、LUMO 和费米能级都升高, 导致吸附染料后开路电压VOC升高. 并进一步探讨了三(8-羟基喹啉-5-羧酸)铁在TiO2(101)表面复合过程及作用机理.     

Conductance switching in diarylethenes bridging carbon nanotubes

The recently reported photoswitching of diarylethene derivative molecules bridging carbon nanotube (CNT) contacts is theoretically analyzed. The short lifetime of the lowest unoccupied molecular orbital (LUMO) indicates that neither the open nor closed form of the molecule can be photoexcited into a charge-neutral excited state for any appreciable length of time preventing photochromic ring opening. Analysis of the highest occupied molecular orbital (HOMO) and LUMO lifetimes also suggests that photoexcitation results in oxidation of the molecules. This either reduces the quantum yield of photochromic ring closing, or it gives rise to the possibility of oxidative ring closing. Analysis of the resistance values and energy levels indicates that the HOMO energy levels of the closed isomers relevant for transport must lie within a few k(B)T of the CNT Fermi level. For armchair contacts, the change in resistance with isomer or substituent group is the result of shifts in the energy level of the molecular HOMO. The coupling of the molecular HOMO to the CNT contacts is insensitive to the isomer type or substituent group. For zigzag CNTs, the conductance is dominated by surface states at the Fermi level on the cut ends of the CNTs so that the conductance is relatively insensitive to the isomer type, and the conductance switching ratio is low. Multiple bridging molecules can interact coherently, resulting in energy splitting, shifting, and interference that cause a nonlinear change in conductance with increasing numbers of molecules. Instead of a factor of 3 increase in conductance expected for three independent channels, a factor of 10(3) increase in conductance is obtained for three bridging molecules.