Preparation and Characterization of Polymeric Nanocapsules Produced by in Situ Polymerization From Nanoemulsions Produced by Direct Emulsification

Polymeric nanoparticles constitute an important drug delivery system with controlled release profile. This article describes a new way to produce polymeric nanocapsules using a vegetable oil nanoemulsion as template. The process occurs in two steps: First, a nanoemulsion was obtained with a low-energy method based on phase inversion emulsification, using 2-ethylhexyl acrylate as lipophilic monomer. The in situ polymerization of the nanoemulsion droplets is induced by the addition of polymerization catalyzers. The mean size of the polymeric nanoparticles was evaluated by photon correlation spectroscopy and atomic force microscopy. Both techniques showed the formation of polymeric nanocapsules with a mean particle size less than 300 nm.     

Experimental Investigation on Yield Stress of Water-in-Heavy Crude Oil Emulsions in Order to Improve Pipeline Flow

An experimental study on yield stress of water-in-heavy crude oil emulsions has been carried out by using a HAAKE RS6000 Rheometer with a vane-type rotor. Several factors such as oil volume fraction, shear rate, temperature, and emulsifying agent on the yield stress of emulsions were investigated. Zero shear viscosity of heavy crude oil was 6000 mPas at 30°C, with a density 955 kg/m³. This study shows that the yield stress increases linearly with the increasing shear rate, and displays an exponential decay with increasing the temperature and oil volume fraction. Although the addition of emulsifying agent enhanced the stability of the emulsion, to some extent it also increased the yield stress, especially for the emulsions with high oil volume fractions. Therefore, to reduce the start-up force for the pipeline transport of water-in-heavy crude oil emulsions, the starting rate should be decreased, temperature increased, or oil volume fraction increased. These results are helpful to improve the transportation of water-in-heavy crude oil in pipeline.      

Adsorption of Fe(III) from Aqueous Medium onto Glycine-Modified Chitosan Resin: Equilibrium and Kinetic Studies

The adsorption of Fe(III) onto glycine-modified chitosan (G@Chs) resin has been investigated. The parameters studied include the effects of pH, contact time, and initial metal ion concentrations by batch method. The optimal pH for the adsorption of Fe(III) was found to be 2.5. The results obtained from equilibrium adsorption studies are fitted in various adsorption models such as Langmuir and Freundlich, and each model parameter were evaluated. Kinetics and thermodynamic parameters of the adsorption process were also investigated. The maximum uptake was found to be 0.9 mmol g^?1 at 25°C.     

Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.     

Preparation and Characterization of Modified Cellulose Adsorbents with High Surface Area and High Adsorption Affinity for Hg(II)

Cellulose was modified via chlorination using phosphorous oxychloride followed by functionalization with amine and thiol moieties. The obtained modified cellulose samples were investigated by means of FTIR, TGA, TEM, and nitrogen-adsorption surface area (BET). The BET measurements showed a remarkable increase in the surface area of Cell-N-S (477.7 m²/g) and Cell-N (706 m²/g). The resins gave an uptake capacities of 38 and 7.2mmol/g for Cell-N-S and Cell-N, respectively toward Hg(II) from its solutions. These values are considered much better compared with other reported resins. Regeneration of the resins was achieved effectively using acidified thiourea.