Scanning force microscopic study of surface structure and properties of (alkylsilane/ fluoroalkylsilane) mixed monolayers

(Alkylsilane/fluoroalkylsilane) mixed monolayers were immobilized covalently on a silicon wafer surface with stable surface structure. Atomic force microscopic observation of the n-octadecyltrichlorosilane (OTS)/[2-(perfluorooctyl)ethyl]trichlorosilane (FOETS) mixed monolayer revealed that the crystalline OTS circular domains of ca. 1–2μm in diameter were surrounded by a sealike amorphous FOETS matrix, even though the molar fraction of OTS was above 75%. Also, the phaseseparated monolayer can be prepared from FOETS, and a non-polymerizable and crystallizable amphiphile such as lignoceric acid (LA). The phase separation of the (alkylsilane/fluoroalkylsilane) mixed monolayer might be attributed to both faster spreading of FOETS molecules on the water surface and the crystallizable characteristics of alkylsilane molecules. The mixed monolayer of crystalline alkylsilane (OTS) and amorphous alkylsilane (n-dodecyltrichlorosilane, DDTS) formed a phase-separated structure on the water surface because of the crystallizable characteristics of OTS. Lateral force microscopic (LFM) observation revealed that the order of the magnitude of lateral force generated against the silicon nitride tip was: n-triacontyltrichlorosilane (TATS) domain with longer alkyl chain > amorphous FOETS matrix > crystalline OTS domain. On the other hand, scanning viscoelasticity microscopic observation revealed that the order of the magnitude of modulus was: Si substrate > crystalline OTS domain > amorphous FOETS matrix.     

Influence of phytohormones on polar and hydrophobic parts of mixed phospholipid monolayers at water/air interface

Surface parameters--the limiting area, collapse pressure, and compressibility modulus for monolayers of phospholipids containing a determined hydrophobic part (16:0) but different polar parts (PPL) and a determined polar part (PC) but different fatty acids (HPL), characteristic of nonembryogenic (NE) and embryogenic (E) winter wheat calli--were evaluated at 15 degrees C. These parameters were dependent on the kind of hydrophilic group and the size of the hydrophobic part of phospholipids. In the case of PPL, higher values of Alim and picoll were noticed for NE phospholipids. In the case of HPL, lower Alim and higher picoll were detected for NE than for E monolayers. All investigated phospholipid systems stimulated the adsorption of phytohormones from the water subphase. The influence of phytohormones of anionic (IAA, 2-4-D), cationic (kinetin, zeatin), and nonionic character (zearalenone) was examined. It appeared that the surface activity of phytohormones depended strongly on the kind of tissue from which the phospholipid mixture was extracted and, in a lesser degree, on their charge. In PPL systems with a determined hydrophobic part (16:0), no great differences in phytohormone influence on NE and E monolayers were observed (except of IAA). The greatest phytohormone influence on NE monolayers in HPL systems was related to the structure of the hydrophobic part of phospholipids. IAA, the most active (with the highest Alim values) among the phytohormones examined, influenced both HPL and PPL monolayers. This indicated the interactions of IAA with polar groups of phospholipids. Phytohormones also changed the monolayer stability against collapse process and the direction of changes depended on the kind of tissue (embryogenic or nonembryogenic).     

Lipolysis of didecanoyl-lecithin/triolein mixed monolayers by phospholipaseA 2

A study of enzyme lipolysis by pancreatic phospholipaseA ₂ and by vipera berus phospholipaseA ₂ on monomolecular mixed films of didecanoyl-lecithin and triolein on an aqueous subphase of pH 8 has been carried out. The influence of the composition of the mixed film, the surface pressure of the film and the amount and type of the injected enzyme on the lipolysis rate were studied.In order to relate the lipolytic activity with the monolayer state, the compression isotherms of the didecanoyl-lecithin/triolein mixed monolayers have also been obtained.The resuls are compared to observations on lipolytic activity of phospholipaseA ₂ on the didecanoyl-lecithin/cholesterol mixed monolayers. Triolein improves the kinetic conditions of the lipolysis of lecithin films in a higher degree than cholesterol. Probably it increases the enzyme penetration by the fluidifying effect exerted on the lecithin monolayers.     

Surface miscibility of EPC/DOTAP/DOPE in binary and ternary mixed monolayers

Surface pressure (π)-molecular area (A) curves were used to characterize the packing of pseudo-ternary mixed Langmuir monolayers of egg phosphatidylcholine (EPC), 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and L-α-dioleoyl phosphatidylethanolamine (DOPE). This pseudo-ternary mixture EPC/DOPE/DOTAP has been successfully employed in liposome formulations designed for DNA non-viral vectors. Pseudo-binary mixtures were also studied as a control. Miscibility behavior was inferred from π-A curves applying the additivity rule by calculating the excess free energy of mixture (ΔG(Exc)). The interaction between the lipids was also deduced from the surface compressional modulus (C(s)(-1)). The deviation from ideality shows dependence on the lipid polar head type and monolayer composition. For lower DOPE concentrations, the forces are predominantly attractive. However, if the monolayer is DOPE rich, the DOTAP presence disturbs the PE-PE intermolecular interaction and the net interaction is then repulsive. The ternary monolayer EPC/DOPE/DOTAP presented itself in two configurations, modulated by the DOPE content, in a similar behavior to the DOPE/DOTAP monolayers. These results contribute to the understanding of the lipid interactions and packing in self-assembled systems associated with the in vitro and in vivo stability of liposomes.     

Tuning the hydrophobic properties of silica particles by surface silanization using mixed self-assembled monolayers

Here we describe a novel method of preparing hydrophobic silica particles (100-150 nm; water contact angle of dropcasted film ranging from 60 degrees to 168 degrees) by surface functionalization using different alkyltrichlorosilanes. During their preparation, the molecular surface roughness is also concurrently engineered facilitating a change in both the surface chemical composition and the geometrical microstructure to generate hierarchical structures. The water contact angle has been measured on drop-cast film surface. The enhancement in the water contact angle on 3D (curved) SAMs in comparison to that on 2D (planar) surface is discussed using the Cassie-Baxter equation. These silica particles can be utilized for many potential applications including selective adsorbents and catalysts, chromatographic supports and separators in microfluidic devices.     

Membrane properties of mixed ganglioside GM1/phosphatidylcholine monolayers

The interaction between ganglioside G_M1 (GM1) and --dipalmitoylphosphatidylcholine (DPPC) in mixed monolayers was investigated using surface pressure measurements and atomic force microscopy (AFM), and the effects of GM1, surface pressure and temperature on the properties of the membranes were examined. Mixed GM1/DPPC monolayers were deposited on mica using the Langmuir–Blodgett (LB) technique for AFM. GM1 and DPPC were miscible below the 0.2 mole fraction of GM1 and there was attractive interaction between GM1 and DPPC. The AFM images for the GM1/DPPC monolayers (X_GM1 < 0.2) at 30 mN m⁻¹ and 25 °C indicated a percolation pattern which means a micro phase separation: namely, the mixed film composed of GM1 and DPPC phase-separated from the DPPC liquid-condensed film. The AFM images for the mixed monolayers at 33 mN m⁻¹ indicated a specific morphology when the surface pressure was varied from 30 to 40 mN m⁻¹. The percolation pattern in the AFM image at 25 °C came to be destroyed with increasing temperature and completely disappeared at 45 °C. The change in the morphology of mixed GM1/DPPC monolayers on varying the surface pressure and temperature is thought to be related to signal transduction and a preventive mechanism against viral infections in the human body.     

Miscibility of mixed stereoregular PMMA/PVPh monolayers at the air/water interface

The mixed monolayer behavior of stereoregular poly(methyl methacrylate) (PMMA) and poly(vinyl phenol) (PVPh) was investigated from the measurements of surface pressure–area per molecule (π–A) isotherms. The π–A isotherms indicated that isotactic PMMA (iPMMA) and PVPh were miscible at the air/water interface. The miscibility and non-ideality of the mixed monolayers were examined by calculating the excess area as a function of composition, and negative deviations from ideality were observed, which suggest the existence of attractive interactions between iPMMA and PVPh. However, the π–A isotherms of mixed syndiotactic PMMA (sPMMA)/PVPh monolayers showed positive deviation from ideality, which might suggest that non-favorable interactions exist between sPMMA and PVPh.The π–A isotherms of mixed atactic PMMA (aPMMA)/PVPh monolayers exhibited complicated excess area behavior. Both positive and negative deviations from ideality were observed at various surface pressures. These isotherm results of mixed polymers correlate approximately well with the miscibility of the corresponding mixtures in the bulk state. The formation of hydrogen bonding between PMMA and PVPh was substantiated in the bulk state by means of Fourier transform infrared (FTIR). Regardless of tacticity, an increase of hydrogen-bonded carbonyl fraction was observed.     

Retardation of water evaporation by less-defective mixed monolayers spread from bulk solids onto water surface

From AFM observation of transferred films on mica, it has been found that mixed monolayers of hexadecanol with poly(vinyl stearate) give a film with a less-defective and flat surface by spreading from bulk solids of those mixtures onto a water surface without using any organic solvent. As a result, those mixed monolayers have a considerably larger effect on retardation of water evaporation in comparison with those spread from the solution of the mixtures. After the saturated surface pressure of the mixed monolayer spread from the bulk solids, an enhanced effect on retardation of water evaporation was found, accompanied by the preferential spreading of hexadecanol and the gradual reduction of defects in the mixed monolayer.     

Influence of temperature on microdomain organization of mixed cationic-zwitterionic lipidic monolayers at the air-water interface

The thermodynamic behavior of mixed DOTAP-DPPC monolayers at the air-water interface has been investigated in the temperature range from 15 to 45 degrees C, covering the temperature interval where the thermotropic phase transition of DPPC, from solid-like to liquid-like, takes place. Based on the regular solution theory, the miscibility of the two lipids in the mixed monolayer was evaluated in terms of the excess Gibbs free energy of mixing DeltaG(ex), activity coefficients f(1) and f(2) and interaction parameter omega between the two lipids. The mixed DOTAP-DPPC film was found to have positive deviations from ideality at low DOTAP mole fractions, indicating a phase-separated binary mixture. This effect depends on the temperature and is largely conditioned by the structural chain conformation of the DPPC lipid monolayer. The thermodynamic parameters associated to the stability and the miscibility of these two lipids in a monolayer structure have been discussed in the light of the phase diagram of the DOTAP-DPPC aqueous mixtures obtained from differential scanning calorimetry measurements. The correlation between the temperature behavior of DOTAP-DPPC monolayers and their bulk aqueous mixtures has been briefly discussed.     

Interfacial properties of Pluronics and the interactions between Pluronics and cholesterol/DPPC mixed monolayers

Pluronics are triblock copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) with wide range of hydrophilic-lipophilic balance. In order to investigate the relationship between the chemical structures of Pluronics and the interfacial properties at the air-water interface by monolayer techniques, Pluronics L61, P65, F68, P84, P123, L35, and P105 were selected. Since cholesterol influenced substantially the molecular packing stage and the characteristics of cell membranes, the interactions between Pluronics and model cell membranes in the absence and presence of cholesterol were compared. The results of pi-A isotherms and surface elasticities of Pluronic monolayers indicated that the first and second transition like stage were mainly affected by the numbers of EO and PO monomers, respectively. Pluronics with higher hydrophobicities demonstrated larger surface activities and penetration abilities to dipalmitoylphosphatidylcholine (DPPC) monolayers, which might be due to hydrophobic interactions and van der Waals forces. In the presence of cholesterol, hydrogen bonding effects was supposed to exist between the 3beta-hydroxy group of cholesterol and ether oxygen of PEO chains, which led Pluronic F68, with the longest PEO chain herein, to exhibit significantly higher penetration ability. Our findings proposed a theoretical basis for selection of optimized drug carriers and the starting point for further investigations.     

Azeotropic transformation in mixed monolayers of octadecylurea and hexadecylurea

The surface pressure of mixed monolayers of octadecylurea and hexadecylurea has been measured as a function of mean area per molecule at various temperatures and compositions. The surface pressure of the phase transition obtained was observed to decrease both with an increase in temperature and with an addition of another component. With the aid of the thermodynamic method developed previously, the apparent molar entropy and energy changes associated with the phase transition were found to be positive. These positive values were explained by the rupture of the intermolecular hydrogen bonding. Furthermore, the activity coefficients of film-forming components with reference to their respective pure components were considered in connection with the mutual interaction between octadecylurea and hexadecylurea molecules. It was concluded that the system exhibits the negative azeotropy as a result of the difficulty in forming the hydrogen bonding in the mixed monolayer.     

Squeeze-out from mixed monolayers of dipalmitoylphosphatidylcholine and egg phosphatidylglycerol

Plots of surface pressuer (π) vs surface area (A) are taken from mixed monolayers of dipalmitoylphosphatidylcholine (DPPC) and “egg” phosphatidylglycerol (egg PG) with the concentration of egg PG (X) ranging from 0 to 100%, the temperatures (T) from 37 to 41°C, and the compression rate (dA/dt) from −13.6 to −688 mm²s⁻, and at a relative humidity of over 90%. Between limiting values of X, T, and dA/dt the π-A plots of compression show regions of nearly constant π (plateaus) which start at values of π (π_pb) of 48 ± 2 mN m⁻¹, and which can be followed by an increase in π until collapse occurs at 70 mN m⁻¹. π_pb is independent of X, T, and dA/dt. The plateau is correlated with a loss of molecules from the monolayer, which increases strongly with X and T and decreases with dA/dt. The quantitative results are not in agreement with separate collapse of the components. A model is presented stating that plateaus occur when the transition from the liquid-expanded (LE) to the liquid-condensed phase (LC) is incomplete at π_pb. During plateau formation a mixed LE phase is squeezed out at its collapse pressure. The remaining LC phase can be compressed to 70 mN m⁻¹. Results of calculations based on this model are in agreement with the experimental results and predict slight enrichment of the squeezed-out phase with respect to egg PG.     

An atomic force microscopy study of asphaltenes on mica surfaces. Influence of added resins and demulsifiers

 Monolayers of asphaltene and resins on the water surface have been transferred at a surface pressure of 10 mN/m onto mica substrates using the Langmuir–Blodgett technique. Atomic force microscopy (AFM) has been used to examine the topography of these layers. Monolayers consisting of pure asphaltene fractions provide a rigid film with a close-packed structure, while the resins build up a continuous open network. Mixed films of these two fractions show that a gradual increase in resin concentration leads to an opening of the rigid asphaltene structure towards a more resin like configuration. Increased aggregation when the two heavy functions are present in one film is seen as larger individual units in the AFM pictures. Addition of high-molecular-weight demulsifiers/inhibitors results in the same kind of influence on the asphaltene film as seen with the resins. Received: 30 April 1999 Accepted: 29 November 1999     

Thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface

This study investigated the thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface at 37°C. Surface pressure–area isotherms and relaxation curves for the mixed monolayers were obtained by using a computer-controlled film balance. In the thermodynamic analysis of the mixed monolayers, the areas of monolayers exhibited negative deviations from the ideal values at all compositions for lower surface pressures. However, at higher surface pressures, distinctively positive deviations from ideality were observed at lower DPPC contents. Excess free energies of mixing had been calculated and the most stable state of the mixed monolayer with x_DPPC=0.5 or 0.6 was found. Moreover, the relaxation kinetics of the mixed monolayers was investigated by measuring the surface area as a function of time at a constant surface pressure of 40 mN m⁻¹. It was shown that the relaxation processes could be described by the models considering nucleation and growth mechanisms.     

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

The surface pressure dynamics and appearance of mixed monolayers of cholesterol and different sized polystyrenes at an air-water interface

Synthetic polymers are increasingly being used in situations where they are designed to interact with biological systems. As a result, it is important to investigate the interactions of the polymers with biochemicals. We have used cholesterol, as an example of an important biological surfactant component, to study its interactions with polystyrene. Mixed monolayers of cholesterol and one of two different molecular weight polystyrenes were formed at an air-water interface to investigate their interactions and to determine whether the size of the polystyrene affected the interaction. The pressure-area (pi-A) isocycles of mixed monolayers of cholesterol and polystyrene MW 2700 or polystyrene MW32700 showed that strongest attractive interactions occur at high surface pressures and in polystyrene rich films. The excess area and excess free energy of mixing were most negative at high surface pressures and at high mole fraction of polystyrene. The most stable mixed monolayers were formed with X(PS2700) = 0.9 and X(PS32700) = 0.09. Microscopic observation of the mixed monolayers of cholesterol and polystyrene showed the formation of stable islands in the cholesterol/polystyrene mixtures. These observations, the nature of the inflection points in the isocycles, and the anomalous changes in free energy lead us to conclude that there is a stable rearrangement of polystyrene into compact islands when it is mixed with cholesterol. Any excess cholesterol is excluded from these islands and remains as a separate film surrounding the islands.     

沥青质含量对渣油加氢转化残渣油收率和性质的影响

以塔河常渣脱沥青油掺兑不同含量的沥青质为原料,于高压釜反应器内进行加氢转化反应实验,考察沥青质含量对渣油加氢转化残渣油收率和性质的影响。研究结果表明,随原料中沥青质含量的增加,加氢残渣油的收率逐渐降低,加氢残渣油中的沥青质和焦炭产量之和与原料中沥青质含量的比值逐渐减小,在实验选定的条件下,高沥青质含量时沥青质更倾向于发生氢解反应生成小分子组分。与原料相比,反应后所得>350 ℃残渣油的平均相对分子质量、H/C摩尔比减小,密度增大,硫含量降低,氮含量增加,饱和分和沥青质含量增加,芳香分及胶质含量降低。随渣油中沥青质含量的增加,硫、氮脱除率先增加后降低。