Synthesis, characterization, and aqueous properties of new amphiphilic copolymer with fluorocarbon groups

A series of amphiphilic copolymers with fluorocarbon groups (Poly(AMPS-co-FS), PAMFS) were synthesized by the radical copolymerization of sodium 2-acryamido-2-methylpropanesulfonate (AMPS) and styrene derivatives with a fluorocarbon side chain (FS). The structures and molecular characteristics of PAMFS were confirmed by ¹H-NMR, ¹⁹F-NMR, elemental analysis, and static light scattering. The aggregation behavior of the copolymer in aqueous solution was studied by surface tension, electrical conductivity, dynamic laser light scattering, transmission electron microscopy, and fluorescence measurements at different conditions. The results indicated that the surface activity of PAMFS is dependent on the content of fluorocarbon groups in the copolymer structure. The surface tension (γ _cmc) and critical micelle concentration of PAMFS decrease with the increase of sodium chloride concentration. The copolymers formed micelle-like aggregates and the fluorocarbon groups exhibited a strong tendency for intermolecular association.     

Amphiphilic polymer gel electrolytes. I. preparation of gels based on poly(ethylene oxide) graft copolymers containing different ionophobic groups

Amphiphilic graft copolymers were prepared via the radical copolymerization of poly(ethylene oxide) (PEO) macromonomers with fluorocarbon or hydrocarbon acrylates in toluene with 2,2′‐azobisisobutyronitrile (AIBN) as an initiator. ¹H NMR spectroscopy confirmed that the composition of the graft copolymers corresponded well to the monomer feed. For gel electrolytes prepared from the amphiphilic copolymers, the nature of the ionophobic parts of the amphiphilic graft copolymers had a great influence on the ion conductivity. Gel electrolytes based on graft copolymers containing fluorocarbon side chains showed significantly higher ion conductivity than electrolytes based on graft copolymers containing hydrocarbon groups. The ambient‐temperature ion conductivity was about 2.6 mS/cm at 20 °C for a gel electrolyte based on an amphiphilic graft copolymer consisting of an acrylate backbone carrying PEO and fluorocarbon side chains. Corresponding gels based on graft copolymers with PEO side chains and hydrocarbon groups showed an ambient‐temperature ion conductivity of about 1.2 mS/cm. The gel electrolytes contained 30 wt % copolymer and 70 wt % 1 M LiPF₆ in an ethylene carbonate/γ‐butyrolactone (2/1 w/w) mixture. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2223–2232, 2001     

Electron donor–acceptor properties of thin polymer films on silicon. II. Tetrafluoroethylene polymerized by RF glow discharge techniques

Metal–insulator–semiconductor (MIS) techniques were used to show that 86–210 nm thick plasma-polymerized tetrafluoroethylene films on silicon stored only negative charge (electron acceptors). This property persisted at a reduced level when a 7 nm thick inner layer of hydrolyzed γ-aminopropyltriethoxysilane was combined with an outer layer of plasma-polymerized tetrafluoroethylene. The dispersion force contribution to the surface energy, γ^d_s, for the fluorocarbon films was found to be 6 mJ/m² (erg/cm²) which is comparable with the lowest values found in the literature. X-ray photoelectron spectroscopy (XPS) revealed a substantial content of ? CF₃ groups in the fluorocarbon films. This finding coupled with the reported effects of noncrystallinity, crosslinking, and branching on the surface energies of fluorocarbon systems were used to explain the low surface energy and electrophilicity of the plasma-deposited poly(tetrafluoroethylene)s.     

Synthesis and Phase Behavior of Azo Dye Containing Liquid Crystalline Polyorganosiloxane

Abstract

A series of liquid crystalline polyorganosiloxanes containing both azo dye and cholesteryl groups were synthesized by reacting poly[3- chloroformylpropyl)methylsiloxane-co-dimethylsiloxane] with both cholesterol and 4-(4′-methoxyphenylazo)phenol. The yields were between 73 and 81%. Most of these new polyorganosiloxanes are colored solid products. Their chemical structures were confirmed by IR, ¹H NMR, and elemental analysis. Their phase behaviors were also investigated by using differential scanning calorimetry (DSC) and polarizing microscopy. The results show that all these polyorganosiloxanes exhibit liquid crystalline behavior at various temperatures and at any azo dye content. As a result of the orientation of both mesogenic azo dye and cholesteryl groups, smectic phases were formed beginning around 0°C, and cholesteric phases appeared above 60°C.     

Modification and Dispersion of the Polysiloxane Materials with Perfluorocarbon Groups and Cationic Side Chains

Novel polysiloxane material modified with perfluorocarbon groups and quaternary cationic side chains was synthesized by ring-opening polymerization of cyclosiloxane and graft reaction. The polysiloxane polymers containing pendant groups were the polysiloxanes modified with amino group, perfluorocarbon side chain, tertiary and perfluorocarbon side chains, or quaternary cationic and perfluorocarbon groups. The yields of the modified polymers were 94.2%, 86.7%, 88.4%, 82.5%, respectively. FTIR, ¹H NMR, ¹³C NMR, and ¹⁹F NMR were used to characterize the structures of the polysiloxane materials. The dispersion technology of the polysiloxane materials was investigated. The polysiloxane material modified with perfluorocarbon and cationic groups imparted high surface activity. The polyesters treated with the polymers had good repellency to water.     

Mass spectrometry of fluorocarbon‐labeled glycosphingolipids

A method for generation of novel fluorocarbon derivatives of glycosphingolipids (GSLs) with high affinity for fluorocarbon phases has been developed, and their potential applications to mass spectrometry (MS)‐based methodologies for glycosphingolipidomics have been investigated. Sphingolipid ceramide N‐deacylase (SCDase) is used to remove the fatty acid from the ceramide moiety, after which a fluorocarbon‐rich substituent (F‐Tag) is incorporated at the free amine of the sphingoid. In initial trials, a neutral GSL, globotriaosylceramide (Gb₃Cer), three purified bovine brain gangliosides, and four fungal glycosylinositol phosphorylceramides (GIPCs) were de‐N‐acylated, derivatized by prototype F‐Tags, and recovered by solid phase extraction on fluorocarbon‐derivatized silica (F‐SPE). The efficacy of SCDase treatment of GIPCs was here demonstrated for the first time. Compatibility with subsequent per‐N,O‐methylation was established for the F‐tagged Gb₃ Cer and purified gangliosides, and extensive mass spectra (MS¹ and MS²) consistent with all of the expected products were acquired. The potential use of F‐tagged derivatives for a comprehensive MS based profiling application was then demonstrated on a crude ganglioside mixture extracted from bovine brain. Finally, a simple trial in microarray format demonstrated fixation of F‐tagged G_M1 ganglioside to a fluorous glass surface, with the glycan intact and available for interaction with a fluorescent derivative of cholera toxin B chain. The methods described thus provide a new avenue for rapid GSL recovery or cleanup, potentially compatible with a variety of platforms for mass spectrometric profiling and structure analysis, as well as parallel analysis of functional interactions. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and characterization of periodic mesoporous organosilica terminally functionalized with fluorocarbon groups by a direct synthesis

Fluorocarbon groups were used to modify the pore channels of ethane-bridged periodic mesoporous organosilica by the co-condensation of 1,2-Bis(triethoxysilyl)ethane (BTESE) and trifluoropropyltrimethoxysilane (TFPTMS) in the presence of Poly(ethylene glycol)-B-Poly(propylene glycol)-B-Poly(ethylene glycol) (P123) surfactants under acidic conditions. The functionalized materials were investigated in detail by means of XRD, TEM, FT-IR, solid-state NMR, and N₂ adsorption. The effect of fluorocarbon groups concentration on the mesoscopic order and pore structure of the functionalized materials was also studied. The results show that bridging groups in the framework do not cleave and fluorocarbon groups are attached covalently to the pore wall of periodic mesoporous organosilica after functionalization. The samples functionalized with 20% TFPTMS remain desired mesoporous architecture, with a narrow pore size distribution centered at 4.1 nm, a large surface of 834 m²/g and a pore volume of 0.91 cm³g⁻¹, without pronounced change compared to the pure periodic mesoporous organosilica. Unfortunately the functionalized materials become structurally disordered with increasing amount of fluorocarbon groups.     

Synthesis and optical activity of isosorbide chiral derivative containing fluorocarbon group as chiral dopant in liquid crystal materials

Novel isosorbide derivative containing perfluorocarbon group,bi（perfluorooctanesulfonyl）isosorbide ester as chiral dopant in liquid crystal,was synthesized.Chemical structure was characterized by elemental analysis,FT-IR,¹H NMR and ¹⁹F NMR.The optical texture of the mixture was observed by polarized optical microscopy（POM）.Novel chiral dopant containing perfluorocarbon group had excellent optical activity.Its specific rotation and molar rotation were noticeable higher than those of bi（4-chloromethylbenzenecarbonic）isosorbide ester.The fluorocarbon group improved the molar rotation of chiral compound and did not affect optical rotation direction.The texture of the mixture added isosorbide derivative with fluorocarbon group showed the oily streak texture.     

Well-defined polyisocyanates via organotitanium(IV) catalyzed living polymerizations of isocyanates

The development of living organotitanium(IV) catalyzed polymerizations is presented. A living polymerization of alkyl isocyanates was developed using TiCl₃OCH₂CF₃, I, as a catalyst, through which large quantities of well-defined (in terms of molecular weight and polydispersity) polyisocyanates are obtainable under ambient conditions. η⁵-CpTiCl₂OCH₂CF₃ (Cp = cyclopentadienyl), II, is also an excellent catalyst for the polymerization of isocyanates and, unlike I, will polymerize monomers containing Lewis basic functional groups in the side chain. Compound II was used to synthesize poly(allyl isocyanate) and poly(2-isocyanatoethyl methacrylate). Both polymers were found to be soluble, in contrast to previous reports, and spectroscopic characterization showed that no crosslinking of the side chains had occurred.     

Preparation of composited Nano‐TiO2 and its application on antimicrobial and self‐cleaning coatings

Composite nano‐TiO₂ with doping Fe³⁺ and Ag was prepared, and further modified by 3‐methacryloxypropyltrimethoxysilane. They were characterized by Zetasizer Nano ZS Particle and Zeta Potential Analyzer, X‐ray diffraction, UV–Vis spectrophotometer, FT–IR spectra, and transmission electron microscopy. The modified composite nano‐TiO₂ was applied to prepare multifunctional fluorocarbon coatings (FCC). Antibacterial activity of multifunctional FCC containing modified composite nano‐TiO₂ was investigated. Its photocatalytic antibacterial activity reached 92%. The influence of doping ingredients, amount of composite nano‐TiO₂, different light houses, or surface modification was discussed. The surface of FCC cannot be easily smirched by oiliness, dust or water because of hydrophobic fluorosilicone emulsion. It would be an available modern interior building coating for its remarkable photocatalytic antibacterial property as well as self‐cleaning function. Copyright © 2009 John Wiley & Sons, Ltd.     

N-phosphoryl amino acids and peptides. Part II: Fast atom bombardment mass spectrometry of N-di-isopropyloxyphosphoryl and N-dibutyloxyphosphoryl amino acids

The positive ion fast atom bombardment mass spectra of N-di-isopropyloxyphosphoryl (Dipp) and N-dibutyloxyphosphoryl (Dbp) amino acids or amino acid methyl esters are presented; and according to the observation of the metastable ions and the high-resolution accurate mass measurement their fragmentation patterns are postulated. Both types of compounds were found to undergo similar fragmentations to produce (HO)₂P(O)N?CH? R + H⁺, in most cases as the most abundant fragment ion of structural significance. An intrinsical difference between the two types of compounds is that N-Dippamino acids appear to favour the successive losses of two molecules of propylene, while the loss of HCOOH seems to be preferred by the Dbp amino acids. For those compounds containing an extra functional group on the side chain of amino acids such as serine or glutamic acid some other type of fragmentation was observed besides the normal phenomenon.     

Using the solvation parameter model to characterize functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion

Ionic liquids (ILs) containing the tris(pentafluoroethyl)trifluorophosphate anion [FAP]⁻ have attracted increased attention due to their unique properties including ultrahigh hydrophobicity, hydrolytic stability, and wide electrochemical window. In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. The role of the functional groups, nature of the counter anion, and cation type on the system constants were evaluated. ILs containing [FAP]⁻ possessed lower hydrogen bond basicity than NTf₂-based ILs having the same cationic component; in the case of hydroxyl-functionalized cations, the presence of [FAP]⁻ led to an enhancement of the hydrogen bond acidity, relative to the NTf₂-analogs. The system constants support the argument that [FAP]⁻ weakly coordinates the cation and any appended functional groups, promoting properties of the cation which might be masked by stronger interactions with other anion systems. The chromatographic performance of the IL stationary phases was evaluated by examining the retention behavior and separation selectivity for chosen analytes. The results from this work can be used as a guide for choosing FAP-based ILs capable of exhibiting desired solvation properties while retaining important physical properties including high thermal stability and high hydrophobicity. Figure In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with tris(pentafluoroethyl)trifluorophosphate [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Tailoring the surface chemistry of carbon fiber and E‐glass composites for improved adhesion

The main challenges in the manufacture of composite materials are low surface energy and the presence of silicon‐containing contaminants, both of which greatly reduce surface adhesive strength. In this study, carbon fiber (CF) and E‐glass epoxy resin composites were surface treated with the Accelerated Thermo‐molecular adhesion Process (ATmaP). ATmaP is a multiaction surface treatment process where tailored nitrogen and oxygen functionalities are generated on the surface of the sample through the vaporization and atomization of n‐methylpyrrolidone solution, injected via specially designed flame‐treatment equipment. The treated surfaces of the polymer composites were analyzed using XPS, time of flight secondary ion mass spectrometry (ToF‐SIMS), contact angle (CA) analysis and direct adhesion measurements. ATmaP treatment increased the surface concentration of polar functional groups while reducing surface contamination, resulting in increased adhesion strength. XPS and ToF‐SIMS showed a significant decrease in silicon‐containing species on the surface after ATmaP treatment. E‐glass composite showed higher adhesion strength than CF composite, correlating with higher surface energy, higher concentrations of nitrogen and C?O functional groups (from XPS) and higher concentrations of oxygen and nitrogen‐containing functional groups (particularly C₂H₃O⁺ and C₂H₅NO⁺ molecular ions, from ToF‐SIMS). Copyright © 2010 John Wiley & Sons, Ltd.     

Novel active ester‐bridged copolynorbornene materials containing terminal functional hydroxyl,amino, methacryloyl,or ammonium groups via ring‐opening metathesis polymerization

Several random and block copolynorbornenes with side chains containing terminal hydroxyl, amino, methacryloyl or ammonium groups were derived from the functional alkyl ester‐containing norbornenes by ring‐opening metathesis polymerization (ROMP). The main chain of ROMP‐type polynorbornene had a more important role for glass‐transition temperature in comparison with vinyl addition polymerization. There is little effect on glass‐transition temperature (about ?39 °C) of polynorbornenes with different length of alkyl side chain. The organosoluble copolynorbornenes with active crosslinkable methylacryloyl side chains derived from functional hydroxyl group were prepared to improve the thermal stability of poly(methyl methacrylate) [decomposition temperature (T_d)^10% = 325 °C in nitrogen] by forming networked AB crosslinked polymer (T = 367 °C in nitrogen). The sizes of nanometer‐scale polymeric micelles of block copolymers having hydrophobic alkyl ester and hydrophilic ammonium groups were measured in the range of 11–25 nm by scanning electron microscopy. These polymeric materials with various functional groups or amphiphilic architectures are accessible by ROMP, whose topology makes them particularly attractive for application potential such as biomedical and photoelectric materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4233–4247, 2005     

Solvation of amino acid residues in water and urea-water mixtures: Volumes and heat capacities of 20 amino acids in water and in 8 molar urea at 25°C

The limiting partial molar volumes V ^o and heat capacities C _p ^o of 20 amino acids have been determined in water and in 8 molar urea at 25.0°C using flow calorimetry and flow densimetry. The side chain contributions to V ^o and C _p ^o were obtained as the difference between the properties of the various amino acids and those of glycine, both in water and in 8M urea. The solvent accessible surface area of the amino acid residues were obtained using a method developed by Hermann, and the total surface areas were separated into their hydrophobic A _Hb and hydrophilic components. In water, C _p ^o values for the various residues C _p ^o (R) were found well correlated with A _Hb , though much less so in the urea solution. Hence, C _p ^o (R) values, in water yield a good estimate of side chain hydrophobicity, but the (waterurea) transfer heat capacities appear strongly affected by specific solvation effects in the urea solution.Presented at the sixth Italian meeting on Calorimetry and Thermal Analysis (AICAT) held in Naples, December 4–7, 1984.     

Synthesis of a novel type of hybrid fluorocarbon ionic surfactants containing polyoxyethlene chain

A novel type of hybrid ionic surfactants containing oxyethylene chain and fluorocarbon chain in one molecule, n-C₈F₁₇SO₃⁻N⁺(C₂H₅)₃(CH₂CH₂O)_nH (n = 4.0, ∼4.1, 8.7, 13.2, 17.8, 22.3), were prepared. The compounds were achieved from the reaction of polyethylene glycol and perfluorooctanesulfonyl fluoride in the presence of Et₃N. The evaluation of their behavior at the air-water interface has been studied from measurements of surface tension versus variation of concentration, and the properties of the hybrid surfactants are not consistent with the empirical rule observed from the fluorinated nonionic surfactant.     

Influence of amino acid side chains on apparent selective opening of cyclic <Emphasis Type="Italic">b</Emphasis><Subscript>5</Subscript> ions

In this study, the possible influence of acidic, basic, and amide side chains on the opening of a putative macrocyclic b ion (b ₅⁺) intermediate was investigated. Collision induced dissociation (CID) of b ₅ ions was studied using a group of hexapeptides in which amino acids with the side chains of interest occupied internal sequence positions. Further experiments were performed with permuted isomers of glutamine (Q) containing peptides to probe for sequence scrambling and whether the specific sequence site of the residues influences opening of the macrocycle. Overall, the trend for (apparent) preferential/selective opening of the cyclic b ₅⁺, presumably due to the side chain, followed by the loss of the amino acid with active side group is: Q > K > D > N ∼ E.     

Efficient Access to Enantiopure γ4‐Amino Acids with Proteinogenic Side‐Chains and Structural Investigation of γ4‐Asn and γ4‐Ser in Hybrid Peptide Helices

Hybrid peptides composed of α‐ and β‐amino acids have recently emerged as new class of peptide foldamers. Comparatively, γ‐ and hybrid γ‐peptides composed of γ⁴‐amino acids are less studied than their β‐counterparts. However, recent investigations reveal that γ⁴‐amino acids have a higher propensity to fold into ordered helical structures. As amino acid side‐chain functional groups play a crucial role in the biological context, the objective of this study was to investigate efficient synthesis of γ⁴‐residues with functional proteinogenic side‐chains and their structural analysis in hybrid‐peptide sequences. Here, the efficient and enantiopure synthesis of various N‐ and C‐terminal free‐γ⁴‐residues, starting from the benzyl esters (COOBzl) of N‐Cbz‐protected (E)‐α,β‐unsaturated γ‐amino acids through multiple hydrogenolysis and double‐bond reduction in a single‐pot catalytic hydrogenation is reported. The crystal conformations of eight unprotected γ⁴‐amino acids (γ⁴‐Val, γ⁴‐Leu, γ⁴‐Ile, γ⁴‐Thr(OtBu), γ⁴‐Tyr, γ⁴‐Asp(OtBu), γ⁴‐Glu(OtBu), and γ‐Aib) reveals that these amino acids adopted a helix favoring gauche conformations along the central C^γ? C^β bond. To study the behavior of γ⁴‐residues with functional side chains in peptide sequences, two short hybrid γ‐peptides P1 (Ac‐Aib‐γ⁴‐Asn‐Aib‐γ⁴‐Leu‐Aib‐γ⁴‐Leu‐CONH₂) and P2 (Ac‐Aib‐γ⁴‐Ser‐Aib‐γ⁴‐Val‐Aib‐γ⁴‐Val‐CONH₂) were designed, synthesized on solid phase, and their 12‐helical conformation in single crystals were studied. Remarkably, the γ⁴‐Asn residue in P1 facilitates the tetrameric helical aggregations through interhelical H bonding between the side‐chain amide groups. Furthermore, the hydroxyl side‐chain of γ⁴‐Ser in P2 is involved in the interhelical H bonding with the backbone amide group. In addition, the analysis of 87 γ⁴‐residues in peptide single‐crystals reveal that the γ⁴‐residues in 12‐helices are more ordered as compared with the 10/12‐ and 12/14‐helices.     

Fluorinated comblike homopolymers: The effect of spacer lengths on surface properties

A series of polyacrylate monomers with F‐alkylalkyl [F(CF₂)_n(CH₂)_n′] side groups were prepared by free‐radical polymerization. The effect of the chemical structure on the surface properties of poly(ethylene terephthalate)s was evaluated by variations in the relative length of the fluorocarbon and hydrocarbon units in the side group. The resulting polymers were quite surface‐active in the solid state. The surface and bulk organization was investigated by X‐ray photoelectron spectroscopy analysis. A strong correlation between the bulk organization and surface properties of the polymers was established. The outmost layer, formed from trifluoromethyl groups and some ester functions, suggests that the side chain is arranged irregularly in the polymer–air interface. The length of the lateral chain governs this organization: long fluorinated chains and short hydrocarbon spacers are essential elements of the molecular design for such low‐surface‐energy materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3737–3747, 2005     

Synthesis and curing of amino‐containing benzoxazine as a novel hardener for diglycidyl ether of bisphenol‐A

Benzoxazines containing various additional functional groups have been extensively reported to improve the properties of polybenzoxazines. In this work, a novel amino‐containing benzoxazine (PDETDA‐NH₂) was conveniently synthesized from diethyltoluenediamine (DETDA), 2‐hydroxybenzaldehyde, and paraformaldehyde and was used as a hardener for diglycidyl ether of bisphenol‐A (DGEBA). The curing behaviors of PDETDA‐NH₂ and PDETDA‐NH₂/DGEBA systems were studied by DSC, FT‐IR, and ¹H NMR. When curing, PDETDA‐NH₂ was firstly polymerized to N,O‐acetal‐type polymer and then rearranged to Mannich‐type polymer at elevated temperature, while the addition reaction between amino and benzoxazine was discouraged because of the steric hindrance of alkyl substituents. During PDETDA‐NH₂/DGEBA curing, it was found that the reactions happened in the order of addition polymerization of amino and epoxide, ring‐opening polymerization of benzoxazine, etherification between phenolic hydroxyl of the polymerized benzoxazine, and epoxide. Compared with DETDA cured DGEBA, PDETDA‐NH₂ cured DGEBA showed higher modulus, higher char yield, and much lower water uptake.