Adsorption of Fe(III) from Aqueous Medium onto Glycine-Modified Chitosan Resin: Equilibrium and Kinetic Studies

The adsorption of Fe(III) onto glycine-modified chitosan (G@Chs) resin has been investigated. The parameters studied include the effects of pH, contact time, and initial metal ion concentrations by batch method. The optimal pH for the adsorption of Fe(III) was found to be 2.5. The results obtained from equilibrium adsorption studies are fitted in various adsorption models such as Langmuir and Freundlich, and each model parameter were evaluated. Kinetics and thermodynamic parameters of the adsorption process were also investigated. The maximum uptake was found to be 0.9 mmol g^?1 at 25°C.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Interaction of Quercus Infectoria Natural Dye with Cationic and Anionic Surfactants: Adsorption/Micellization of Dye

The interaction of Indian natural dye, that is, Himalaya (Quercus infectoria) with cationic surfactant (cetyl trimethyl ammonium bromide) and anionic surfactant (sodium lauryl sulphate) has been studied. The spectrophotometric data showed an interaction between the natural dye and surfactants. Critical micelle concentration (CMC) of the surfactants, determined by measurement of specific conductance and surface tension methods, was found to be increase in case of anionic surfactant while that was found to decrease in case of cationic surfactant. Thermodynamic and surface parameters showed domination of micellization of dye in case of cetyl trimethyl ammonium bromide and domination of adsorption of dye in case of sodium lauryl sulphate.     

Diffusion Mechanisms of Biosorption of Cr(VI) onto Powdered Cotton Stalk

The present study investigates biosorption diffusion mechanism for the removal of toxic hexavalent chromium from aqueous solution using powdered cotton stalk an agricultural waste biomass. The effects of pH, temperature, adsorption isotherms, adsorption kinetics, and thermodynamic on chromium biosorption were investigated. The results showed that a maximum removal efficiency of 95% was achieved at pH 2. The pH at zero point charge (pH_zpc) on biosorbent surface was 4.3. The adsorption kinetics showed that the pseudo-second order rate expression fitted well the biosrption process. The equilibrium isotherm was measured experimentally and results were analyzed by Langmuir, Freundlich, and Temkin isotherms using linearized correlation coefficients. The significant parameters for isotherms were determined. The Langmuir adsorption isotherm relative to two other isotherms was found to fit the equilibrium data best for chromium adsorption. Thermodynamic studies reveal that the biosorption of Cr(VI) on cotton stalk was endothermic, spontaneous and occurs with increase in disorder at solid-liquid interface. Adsorption diffusion kinetic was further analyzed and showed that biosorption mechanism was totally controlled by intraparticle diffusion mechanism.     

Effect of Ionic Surfactants on the Adsorption of Quercus infectoria Natural Dye on Cotton Fiber: A Kinetic Study

The adsorption kinetics of Quercus infectoria natural dye on cotton in the absence and presence of the cationic (cetyl trimethyl ammonium bromide; CTAB) and anionic (sodium lauryl sulfate; NaLS) surfactants has been investigated at three temperatures, namely, 40°C, 50°C, and 60°C. On increasing the surfactant content in the surfactant-dye mixture, the initial rate of adsorption (h _i) and the adsorption capacity at equilibrium (q _e) were found to increase while pseudo-second-order rate constant (k ₂) was found to decrease. The retarding effect of surfactant on k ₂ was in order of CTAB > NaLS. The activation parameters for adsorption process have been evaluated in each case, and the mechanism of adsorption process has been discussed.     

Sweet Corrosion Inhibition on API 5L-B Pipeline Steel

Corrosion inhibition and adsorption behavior of two triazole derivatives on API 5L-B carbon steel in CO₂-saturated 3.5% NaCl solutions was investigated using potentiodynamic polarization, EIS and EFM techniques. Specimen surfaces were characterized using SEM, EDX and XRD. Results show that the two compounds are mixed-type inhibitors and inhibition efficiency increases with increasing concentrations. Adsorption of the two compounds is a mixed between chemisorptions and physisorption and obeys Langmuir adsorption isotherm. Activation energy and thermodynamic parameters were calculated. Surface analyses confirm the formation of iron nitrides on the metal surface, which supports results obtained from previous techniques.     

Adsorption and Corrosion Inhibition Behavior of L-Cystine and Synergistic Surfactants Additives on Mild Steel in 0.1 M H2SO4

The adsorption and corrosion inhibition behavior of mild steel in 0.1 M H₂SO₄ in presence of L-cystine and L-cystine in combination with surfactants sodium dodecyl sulfate and cetyltrimethyl ammonium bromide at 30–60°C was investigated using weight loss and potentiodynamic polarization measurements. Inhibition efficiency of L-cystine is synergistically enhanced on addition of surfactants. Surface morphology of corroded steel samples was evaluated using scanning electron microscopy and atomic force microscopy, which further confirmed the existence of an adsorbed protective film on the mild steel surface. Calculated thermodynamic parameters reveal that adsorption process is spontaneous and obey Langmuir adsorption isotherm.     

Adsorption of Some Tailor-Made Styrylpyridinium Dyes on Sodium Dodecylsulphate-Treated Eggshell Particles (SDS-ESP): Impact of Dye Chain-Length and Substituent

Eggshell particles (ESP), a solid bio-waste, treated with sodium dodecylsulfate (SDS) have been examined for the adsorption of some tailor-made cationic styrylpyridinium dyes. The adsorbent is characterized through Fourier transform infrared spectroscopy and scanning electron microscopy. The anionic headgroups of the surfactant bilayer on the SDS-treated ESP (SDS-ESP) provide avenue for binding with the dye molecules. Dependence of equilibrium adsorption capacity on various adsorption parameters and effects of substituent and hydrophobic tail of the adsorbate on adsorption are enumerated. Physical adsorption obeying pseudo-second order kinetics has been proposed. (Supplemental materials are available for this article. Go to the publisher's online edition of Journal of Dispersion Science and Technology to view the free supplemental file.)     

Dried Biomass of Activated Sludge for Cu2+ Adsorption: Behaviors and Mechanisms

Activated sludge was tested for its ability to remove Cu²⁺ from aqueous solution. The effects of various experimental parameters (initial pH, initial Cu²⁺ concentration, adsorbent dosage, and temperature) on Cu²⁺ adsorption were evaluated. The Langmuir isotherm model well described the adsorption of Cu²⁺ onto activated sludge. The pseudo-second-order kinetic equation was appropriate for describing the kinetic performance of the sorption. Furthermore, Webber–Morris models indicated that the sorption of Cu²⁺ was generally found to involve with the intraparticle diffusion process. Parameters of adsorption thermodynamic suggested that the interaction of Cu²⁺ adsorbed by sludge was spontaneous and exothermic. Activated sludge was characterized by Fourier transform infrared spectroscopy analysis and results showed that active groups such as –OH, –COOH, –NH₂ were involved in Cu²⁺ adsorption. Zeta potential analysis demonstrated inner-sphere adsorption for Cu²⁺ adsorption on sludge.     

Adsorption of Cd(II) Ions onto Activated Carbon Prepared from Hazelnut Husks

In this study, a batch adsorption of Cd(II) ions onto activated carbon (AC) produced from hazelnut husks were investigated. The factors controlling the adsorption process such as initial pH, agitation time, dosage and initial concentration have been examined. The AC was showed a high affinity to Cd(II) ions at pH values between 5.0 and 7.0. The equilibrium time was found to be 300 minutes. Cd(II) adsorption equilibrium was analyzed with both Langmuir and Freundlich isotherm equations and it was found that Langmuir equations fitted well with the experimental data. Maximum Cd(II) adsorption capacity of AC was calculated to be 20.9 mg g^?1. Cd(II) adsorption kinetics described well with the pseudo second order model. The activated carbon prepared from hazelnut husks is efficient sorbent material for the removal of Cd(II) ions from aqueous solutions.     

Corrosion Inhibition of Mild Steel by Safflower (Carthamus tinctorius) Extract: Polarization,EIS, AFM,SEM, EDS,and Artificial Neural Network Modeling

Inhibitory action of safflower (Carthamus tinctorius) extract (SE) was investigated in hydrochloric acid solution through electrochemical (polarization, EIS), and surface analysis (optical microscopy/atomic force microscopy (AFM)/scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS)) techniques. In addition, Inhibition efficiency was predicted by neural network (NN) modeling in elevated temperatures and different acid concentrations. The thermodynamic adsorption parameters propose that this inhibitor retard both cathodic and anodic processes through physical adsorption and blocking the active corrosion sites. Surface analysis techniques confirm the inhibitor adsorption on the metal surface, which is in accordance with the variation of apparent activation energy of corrosion. Finally, inhibition efficiency is discussed in terms of protective film formation.     

Influence of Molecular Weight on Mild Steel Corrosion Inhibition Effect by Polyvinyl Alcohol in Hydrochloric Acid Solution

The corrosion inhibition of mild steel in hydrochloric acid solution in the presence of three different molecular weights of polyvinyl alcohol (PVA) designated as PVA-I, PVA-II, and PVA-III corresponding to 14,000, 72,000, and 125,000 g mol^?1, respectively, was investigated using electrochemical impedance spectroscopy, linear polarization resistance (LPR), and potentiodynamic polarization techniques at 25°C. It was found that PVA of different molecular weights inhibited the corrosion of mild steel in the acid environment. Inhibition efficiency (η%) increases with increase in concentration of the polymers. LPR measurements clearly show that inhibition efficiency increases with increasing molecular weight in the order PVA-III > PVA-II > PVA-I. Polarization curves indicate that PVA functions as a mixed inhibitor affecting both the anodic metal dissolution and cathodic hydrogen evolution partial reactions of the corrosion process. The experimental data obtained fitted well into Langmuir adsorption isotherm model. Physical adsorption mechanism is proposed from the thermodynamic (free energy of adsorption) parameters obtained.