Synthesis and combined properties of novel fluorinated cationic surfactants derived from hexafluoropropylene dimer

Three novel fluorinated surfactants with branched short fluorinated tails as hydrophobic groups, ammonium oxide as polar groups are prepared. Surface tension measurement shows that these fluorinated surfactants are ideal compounds to design new formulations in fire-fighting field.     

Effect of Organic Solvents on the Electrodeposition of Copper from Acidified CuSO4

Using Guerbet tetradecyl alcohol C₁₄GA (synthesized by Guerbet reaction using 1-heptanol as raw material) as intermediate, sodium Guerbet tetradecyl polyoxyethylene ether sulfates [C₁₄GA(EO)_nS, n = 1, 2, 4] were obtained through following steps: synthesizing Guerbet tetradecyl polyoxyethylene ether alcohols [C₁₄GA(EO)_nH, n = 1, 2, 4] by Williamson reaction, then esterifying with chlorosulfonic acid so as to form Guerbet tetradecyl polyoxyethylene ether alcohol sulfates [C₁₄GA(EO)_nSO₃H, n = 1, 2, 4], and finally neutralizing with sodium hydroxide; while sodium Guerbet tetradecyl sulfate(C₁₄GAS) was synthesized only through esterifying and neutralizing reactions. The structures of these anionic surfactants were determined by infrared, nuclear magnetic resonance, and element analysis. The surface activity of these surfactants was studied by means of surface tension. The results have shown that these surfactants possess higher surface activity than the common surfactant C₁₂H₂₅OSO₃Na. Branched-tail structure coming from Guerbet alcohol makes the anionic surfactant (C₁₄GAS) have higher critical micelle concentration (CMC) and better effectiveness in lowering the interface tension between air and water than their linear counterpart (C₁₄H₂₉OSO₃Na). Introducing oxyethyene group into the place between head group and tail group of the surfactant molecule with branched tail can lower the CMC, γ_cmc, and Krafft point. And the effectiveness for reducing the CMC, γ_cmc, Γ_max, and Krafft point of surfactant increased with the increase of oxyethylene group number (n = 1, 2, 4). The relationship between the molecular structure and surface activity of surfactant is discussed.     

Study on Binding Properties of Poorly Soluble Drug Trimethoprim in Anionic Micellar Solutions

Binding and distribution properties of trimethoprim (TMP) in the presence of various anionic surfactants; sodium octyl sulfate (C₈SO₄Na), sodium decyl sulfate (C₁₀SO₄Na), sodium lauryl sulfate (C₁₂SO₄Na), and sodium tetradecyl sulfate (C₁₄SO₄Na) has been studied by conductivity, spectrophotometry and surface tension measurements. The surface properties of anionic surfactants, that is, maximum surface excess concentration (Γ _max ) and minimum area per surfactant molecule (A _min ) at the air/water interface have been evaluated in the absence and presence of TMP using Gibbs adsorption isotherm. From conductivity data the ionization degree and counterion binding parameter have been obtained. Spectrophotometric experiments were used to determine binding constants of TMP to anionic micelles. With the increasing alkyl chain of surfactants, the interaction becomes stronger, which shows the importance of hydrophobic forces and incorporation of TMP molecules to the pure micelles of anionic surfactants increased. The results obtained from the surface tension and conductometric studies have been correlated with those obtained from the spectroscopic studies and binding tendency of TMP to anionic micelles followed the order as: C₁₄SO₄Na > C₁₂SO₄Na > C₁₀SO₄Na > C₈SO₄Na. From these results, the study of the interaction TMP in different anionic micellar solutions provided information about the characteristics of binding properties of poorly soluble drugs.     

Dynamic Surface Tension and Adsorption Mechanism of Surfactant Benzyltrimethylammonium Bromide at the Air/Water Interface

The air‐solution equilibrium tension, γ_c and dynamic surface tension, γ_t, of aqueous solutions of a novel ionic surfactant benzyltrimethylammonium bromide (BTAB) were measured by Wilhelmy method and Maximum bubble pressure method (MBPM), respectively. Adsorption equilibrium and mechanism of BTAB at the air‐solution interface were studied. The CMC was determined to be 0.11 mol/L. The results show that at the start, the adsorption process is controlled by a diffusion step. Toward the end, it changes to a mixed kinetic‐diffusion controlled mechanism with the adsorption activation energy of about 11.0 KJ/mol. Effects of temperature, inorganic salts, and alcohols on adsorption kinetics also are discussed.     

Synthesis and Performance of Novel Sulfonate Gemini Surfactant with Trialkyl Chains

A new type of sulfonate gemini surfactant with three lipophilic alkyl chains (3C₁₀-DS) was synthesized, and the structure of the product was confirmed by using the infrared spectrum and mass spectrum. Its critical micelle concentration (CMC) is 0.41 mmol/L, one order of magnitude lower than those of convectional (single-chain) surfactants, and the minimum surface tension is 27.6 mN/m. The interfacial tension (IFT) between the compound system of 3C₁₀-DS and petroleum sulfonate (PS) and the simulated oil reaches ultra-low levels (10^?3 mN/m), and there exists significant synergistic effect between 3C₁₀-DS and PS. The compound flooding system consisting of polymer and the mixture of 3C₁₀-DS and PS can effectively improve oil recovery for high-medium permeability cores and have a good application prospect in enhancing oil recovery.     

Synthesis and properties of nonylphenol-substituted dodecyl sulfonate

Nonylphenol-substituted dodecyl sulfonate (C₁₂-NPAS) was synthesized via sulfonation-alkylation-neutralization using 1-dodecene, SO₃, and nonylphenol as raw materials. The properties such as surface tension, interfacial tension (IFT), wettability, foam properties, and salinity tolerance of C₁₂-NPAS were systematically investigated. The results show that the critical micelle concentration (CMC) of C₁₂-NPAS was 0.22?mmol?·?L^?1 and the surface tension at the CMC (γ_CMC) of C₁₂-NPAS was 29.4 mN/m. When compared with the traditional surfactants sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), and linear alkylbenzene sulfonate (LAS), the surface properties of C₁₂-NPAS were found to be superior. The IFT between Daqing crude oil and a weak-base alkaline/surfactant/polymer (ASP) oil flooding system containing 0.1?wt% of C₁₂-NPAS can reach an ultralow level of 2.79?×?10^?3 mN/m, which was lower than that found for the traditional surfactant heavy alkylbenzene sulfonate (HABS). The salinity and hardness tolerance of C₁₂-NPAS were much stronger than those found for conventional surfactants, petroleum sulfonate, and LAS. C₁₂-NPAS also shows improved wetting performance, foamability, and foam stability.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

Studies on the Physicochemical Properties of 3-Alkoxyl-2-hydroxypropyl Trimethylammonium Chloride–Sodium Dodecyl Sulfonate Binary-Surfactant Aqueous Systems

Surface tension, micelle formation, surface adsorption, and solubilization of dimethylaminoazobenzene (DMAB) are studied in aqueous solutions of 3-alkoxyl-2-hydroxypropyl trimethylammonium chloride (alkoxyl = C_nH_2n+1O, n = 8, 12, 14, 16), of sodium dodecyl sulfonate, and of mixtures of these cationic surfactants and the anionic surfactant at 40°C. Synergistic effects on micelle formation, surface tension reduction, and solubilization enhancement of DMAB are observed in the cationic–anionic mixed surfactant systems. The experimental results are discussed in the light of the interactions between the two kinds of surfactant ions.     

Mixed micellization and surface properties of non-ionic/cationic surfactants

We investigate the surface properties of aqueous binary mixtures of our cationic surfactant O-dodecyl-N,N′-diisopropylisourea hydrochloride (ISO-DIC C₁₂) with commercially available nonionic surfactant polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether (TritonX-100) at different temperatures (288 to 303?K). The micellization behavior of the binary systems is studied by determining the surface tension and other important physicochemical parameters, such as the critical micelle concentration (CMC), surface tension at the CMC(γ_cmc), Krafft Temperature (T_K), maximum excess concentration (Γ_max), minimum surface area per molecule (A_min), surface pressure at the CMC (П_cmc), and the adsorption efficiency (pC20) at the air/water interface. The study has additionally covered the calculation of thermodynamic parameters of micellization, including the standard Gibbs free energy, the standard enthalpy, the standard entropy, the free energy, and the Gibbs free energy of adsorption at air/water interface. The CMC values of the binary systems determined by experimental data are used to evaluate the micellar composition in the mixed micelle, the interaction parameter β and the activity coefficients f₁(ISO-DIC C₁₂) and f₂ (polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether) using the theoretical treatment proposed by Clint and Rubingh. Our results reveal that the proposed binary systems possess enhanced surface activity compared to those of the individual surfactants.     

Synthesis and Properties of Novel Cationic Triazolium Gemini Surfactants

New type of triazolium Gemini surfactants were synthesized by reaction of epichlorohydrine with long-chain fatty alcohols namely cetyl alcohol and oleyl alcohol furnishing product 2-(alkoxymethyl)oxirane followed by the their subsequent treatment with triazole resulting in the formation of 1-(1,2,4-triazole)-3-alokoxypropane-2-ol which on reaction with 1,6-dibromohexane resulted in the formation of triazolium-based cationic Gemini surfactant. Their formation was confirmed by IR spectroscopy. Surface tension values were used to determine the critical micelle concentration (CMC), minimum area per molecule (A_min) at air?water interface, Gibbs free energy of adsorption (ΔG_ads), the maximum surface excess concentration (Γ_max), and other parameters. The inhibition behavior of dimeric surfactant on the corrosion of carbon steel (CS) in 1 N H₂SO₄ aqueous medium was studied at 30°C. Performance tests like dispersion capability, foaming power and stability, emulsifying power, and wetting ability were determined. The obtained results show that dispersion capability, foaming power, foaming stability, and emulsifying ability are very good. The wetting power of synthesized surfactants is quite better.     

Synthesis and Properties of a Sulfonic Acid-Containing Gemini Surfactant

A novel sulfonic acid-containing gemini surfactant, 6,6′-(butane-1,4-diylbis(oxy)) bis(3-nonylbenzenesulfonic acid), 9BA-4-9BA, was synthesized in high purity and high yield using a facile preparation pathway, and characterized by FTIR, ¹H NMR, and elemental analysis. The content of two sulfonic acid groups was measured by the acid-base titration. DSC and TGA were used to reveal the thermal properties and the product purity. The surface properties of 9BA-4-9BA were evaluated by equilibrium surface tension measurement. It shows that its CMC was 0.65 mmol/L, while the C₂₀ of 0.018 mmol/L was above two orders of magnitude lower than that of traditional monomeric surfactants such as SDS and SDBS, indicating excellent efficiency of micelle formation and reduced surface tension.     

Synthesis and surface activities of organic solvent-soluble fluorinated surfactants

A variety of fluorinated surfactants soluble in organic solvent were prepared, including C₈F₁₇SO₂NHC_nH_2n+1 (n = 2, 4, 6, 8, 10), C₈F₁₇SO₂NHR (R = C₆H₁₁, C₆H₅), C₈F₁₇SO₂N(C_nH_2n+1)₂ (n = 1, 2, 3, 4) and C₈F₁₇SO₂NH(CH₂)_nNHO₂SC₈F₁₇ (n = 6, 10). Their surface activities in various organic solvents were determined by surface tension measurement. The results showed that these fluorinated surfactants can reduce the surface tension of both polar and non-polar organic solvents. In general, organic solvents with strong polarity or long alkyl chain are beneficial to increase the surface activity of these polar fluorinated surfactants. By comparing fluorinated surfactants with the same fluorocarbon segment and connecting group, C₈F₁₇SO₂N(C_nH_2n+1)₂ (n = 1, 2, 3, 4) showed lower surface activity in organic solvents than C₈F₁₇SO₂NHC_nH_2n+1 (n = 2, 4, 6, 8) with an equal carbon number of the solvophilic group. Through surface tension vs. concentration curves given for N-octyl perfluorooctanesulfonamide in various organic solvents, a break point like the critical micelle concentration of ordinary surfactants in aqueous solutions was observed, and the effect of the different types of organic solvents on adsorption and aggregation behavior was also studied.     

Prediction of surface tension and surface concentration of binary refrigerant system (R290/R600a) at various temperatures and pressures

The surface tension of a binary refrigerant mixture of R290(propane: C₃H₈) and R600a(isobutane:i-C₄H₁₀) has been calculated by using critical constants (P_c, V_c and T_c) and acentric factor (ω) at three isotherms of 278 K, 300 K and 320 K over the pressure range from 187.7 to 1540.2 kPa. In this paper, new formalism has been made by using simple mixing rule for modifying the predictive models: Brock–Bird, Pitzer, Hakim et al., Bolotin, Sastri–Rao and Zuo–Stenby. On comparing the computed values of surface tension with experimental data, satisfactory results have been observed. The average absolute deviation (AAD) obtained from the comparison of experimental and calculated surface tension values for six models is less than 1.9%. Finally, in a new approach, the extended Langmuir model (EL) was used to finding more information about the surface structure and surface concentration of binary refrigerant mixtures.     

Studies on Dynamic Surface Tension of an Outstanding Microemulsifier in Supercritical CO2 and Its Wetting Performance

Dodecyl polyoxyethylene(4) polyoxypropylene(5) ether (LS45) is an outstanding microemulsifier in supercritical CO₂. The dynamic surface tension (DST) of this nonionic surfactant was investigated by using the maximum bubble pressure instrument. The effects of concentration and temperature on DST parameters (n, t_i, t*, t_m, and R_1/2) and its adsorption mechanism were discussed by Rosen's empirical equation and the asymptotic Ward and Tordai equation for the LS45 solution system. Finally, the parameters at 1 s related to Draves's wetting performance, pC_20(1s), C_1s (i)*, and C_1s*, analyzed. The results showed that were with increase of bulk concentration and temperature, dynamic surface activity increased. Parameters at 1 s indicated that LS45 is of high surface activity and a very good wetting agent. One‐second related parameters, C_1s (i)* and C_1s*, are valuable in the treatment of practical applications of surfactants. Optimum wetting can be expected at the concentration of 4.8×10^?4 mol/dm³ for LS45 solution.     

Effect of Organic Counterions on the Properties of N-Lauryl Diisopropanolamine Surfactants

The influence of counterions on the surface properties of N-lauryl diisopropanolamine surfactants is delineated using conductometry and surface tension measurements. Twelve types of organic counterions have been studied: C₁–C₁₂ monocarboxylic acids anions. The surface properties of the synthesized surfactants, including surface tension, critical micelle concentration (CMC), effectiveness (π_CMC), efficiency (pC₂₀), maximum surface excess (Γ_max), minimum surface area (A_min), Gibbs energy of micellization (ΔG_mic), and adsorption (ΔG_ad) processes in the aqueous. The biodegradability of the prepared surfactants was tested in river water using the die-away method. Petroleum-collecting and petroleum-dispersing capacities of the synthesized compounds on the surface of water of varying mineralization degree have been studied.     

Synthesis of a novel type of hybrid fluorocarbon ionic surfactants containing polyoxyethlene chain

A novel type of hybrid ionic surfactants containing oxyethylene chain and fluorocarbon chain in one molecule, n-C₈F₁₇SO₃⁻N⁺(C₂H₅)₃(CH₂CH₂O)_nH (n = 4.0, ∼4.1, 8.7, 13.2, 17.8, 22.3), were prepared. The compounds were achieved from the reaction of polyethylene glycol and perfluorooctanesulfonyl fluoride in the presence of Et₃N. The evaluation of their behavior at the air-water interface has been studied from measurements of surface tension versus variation of concentration, and the properties of the hybrid surfactants are not consistent with the empirical rule observed from the fluorinated nonionic surfactant.     

Mechanism of electroless deposition of Ni–W–P alloys by adding surfactants

This paper describes an electroless deposition method for the formation of a thin metallic film containing mainly nickel with significant amounts of tungsten (up to 25%) and phosphorus (5–10%). The film was deposited from an aqueous electrolyte that contained sodium tungstate as a source of tungsten, nickel sulphate as a source of nickel and hypophosphite as the reducing agent and a source of phosphorus. The surfactants were p‐hexyloxy‐p‐sodium sulphonate azobenzene (HSA) with the formula H₁₃C₆OC₆H₄N₂ C₆H₄SO₃Na and p‐hexylbenzyltriethanol ammonium chloride (HBC) with the formula H₁₃C₆H₄CH₂N⁺ (C₂H₄OH)₃Cl^?, added as stabilizers. In this study the process parameters of typical solutions, such as temperature, pH and concentration of tungstate salt and the concentration of different surfactants, were presented and discussed. Adsorption of the surfactants on a metal surface was dependent, among other things, on the structure of their hydrophobic and hydrophilic portions. The effect of adsorption of these surfactants on a metal surface was examined above and below the critical micelle concentration (CMC). The deposition process involves several reactions that occur simultaneously and are described in detail in this work. The mechanism for interaction of the surfactants with the steel surface was proposed through the isotherm for adsorption from aqueous solution. Furthermore, the surface properties of the surfactants were measured, particularly the CMC, the surface tension reduction and the maximum surface excess Γ_max. The tungsten percentage in the deposit layer was strongly influenced by the plating conditions and the critical concentration of each surfactant. The results were discussed according to the surface properties of the additive. The thin film of Ni–W–P achieved high crystal refinement and high hardness, it was smooth and uniform and it exhibited superior corrosion resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Equilibrium and dynamic surface properties of long-chain quaternary ammonium hydroxides with different chain length and number

The equilibrium and dynamic surface tensions of five long-chain alkyl ammonium hydroxides (AAH) at the air/aqueous solution interface were investigated, and the effects of the length and number of alkyl chain on surface tensions had been discussed. With the increase of the length, the equilibrium surface tension (EST) increased from 28.65 to 40.52?mN/m. While, for the double chains at the critical micelle concentration (CMC), the EST decreased from 32.71 to 26.61?mN/m with the length increasing. In addition, the adsorption behaviors of the AAH were analyzed and the effective diffusion coefficients (D_eff) were calculated on basis of the Ward–Tordai equation. Moreover, the time required to attain the EST decreases with the increase of surfactant concentration. The longer the C–H chain is, the lower surface tension at initial concentration is. What’s more, the diffusion processing of the AAH to air/water interface mainly depends on the surfactant concentration, and the adsorption is controlled by diffusion mechanism in a dilute concentration, while under a high concentration the adsorption is controlled by mixed diffusion–kinetic mechanism.