Hyperbranched Aliphatic Polyester Grafted Calcium Carbonate Nanoparticles with a Real One‐Pot Method

The hyperbranched aliphatic polyester grafted calcium carbonate nanoparticles (HAPE‐CaCO₃), was successfully prepared by the real one‐pot method. The AB₂ monomer, 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA), was used as both the surface modifying agent and the monomer of the hyperbranched aliphatic polyester. It introduced the organic active group (hydroxyl group) onto the surfaces of the calcium carbonate nanoparticles (nano‐CaCO₃) and its polycondensation took place subsequently, with the catalysis of p‐toluenesulfonic acid (p‐TSA). The HAPE‐CaCO₃ had been characterized by elemental analysis (EA), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), and transmission electron microscope (TEM).     

<Emphasis Type="Italic">In situ</Emphasis> synthesis and modification of calcium carbonate nanoparticles via a bobbling method

Modified calcium carbonate (CaCO₃) nanoparticles with cubic- and spindle-like configuration were synthesized in situ by the typical bobbling (gas-liquid-solid) method. The modifiers, such as sodium stearate, octadecyl dihydrogen phosphate (ODP) and oleic acid (OA), were used to obtain hydrophobic nanoparticles. The different modification effects of the modifiers were investigated by measuring the active ratio, whiteness and the contact angle. Moreover, transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetry analysis (TGA analysis) were employed to characterize the obtained products. A preliminary reaction mechanism was discussed. According to the results, the active ratio of CaCO₃ modified by ODP was ca. 99.9% and the value of whiteness was 97.3% when the dosage of modifiers reached 2%. The contact angle was 122.25° for the CaCO₃ modified in the presence of sodium stearate, ODP and OA. When modified CaCO₃ was filled into PVC, the mechanical properties of products were improved greatly such as rupture intensity, pull intensity and fuse temperature. The compatibility and affinity between the modified CaCO₃ nanoparticles and the organic matrixes were greatly improved. Supported by the National Natural Science Foundation of China (Grant No. 50372025)     

In-site mineralization of amorphous calcium carbonate particles: A facile and efficient approach to fabricate poly(l-lactic acid) based hybrids

The aim of this investigation is to obtain a polymer-based hybrid material with biodegradability, biocompatibility, and good mechanical properties and this object was realized via. in-situ introduction of the unmodified calcium carbonate (CaCO₃) into a poly(l-lactic acid) (PLLA) matrix. As verified by the measurements from scanning electron microscopy (SEM), optical microscopy, dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), the hybrid films which possesses a uniform dispersion of calcium carbonate CaCO₃ in nano-meter scale, mechanically robustness and thermal stability could be fabricated by a mineralization-alike process. For example, the storage modulus increases from 441 MPa of neat PLLA to 1034 MPa of hybrid film containing 2% (w/w) CaCO₃. In addition, the hybrid films display a significant improvement in its UV-exposure resistance.     

Photo-Oxidative Degradation of Poly(vinyl Chloride) Based Nanocomposites Under Ultraviolet Irradiation

The poly(vinyl chloride) based nanocomposites with 3.0% weight content of the photo-active zinc oxide (ZnO) nanoparticles or the photo-inert calcium carbonate (CaCO₃) nanoparticles was prepared by the solution mixing method, respectively. Their photo-oxidative degradation under ultraviolet irradiation (365 nm) at room temperature were compared with the pure poly(vinyl chloride) via Fourier transform infrared spectroscopy, Thermogravimetric analysis and x-ray photoelectron spectroscopy analyses. The results showed that the photo-inert calcium carbonate (CaCO₃) nanoparticles hampered the photo-degradation of poly(vinyl chloride), whereas the photoactive zinc oxide (ZnO) nanoparticles accelerated the photodegradation of poly(vinyl chloride). Furthermore, the ZnO nanoparticles also favored the crosslinking reaction of the dehydrochlorinated poly(vinyl chloride).     

Nucleation activity of nanosized CaCO3 on crystallization of isotactic polypropylene, in dependence on crystal modification, particle shape, and coating

A detailed analysis of the effect of calcium carbonate nanoparticles on crystallization of isotactic polypropylene (iPP) is reported in this contribution. CaCO₃ nanoparticles with different crystal modifications (calcite and aragonite) and particle shape were added in small percentages to iPP. The nanoparticles were coated with two types of compatibilizer (either polypropylene-g-maleic anhydride copolymer, or fatty acids) to improve dispersion and adhesion with the polymer matrix.It was found that the type of coating agent used largely affects the nucleating ability of calcium carbonate towards formation of polypropylene crystals. CaCO₃ nanoparticles coated with maleated polypropylene can successfully promote nucleation of iPP crystals, whereas the addition of nanosized calcium carbonate coated with fatty acids delays crystallization of iPP, the effect being mainly ascribed to the physical state of the coating in the investigated temperature range for crystallization of iPP, as well as to possible dissolution by fatty acids of heterogeneities originally present in the polypropylene matrix.     

Calcium Carbonate@silica Composite with Superhydrophobic Properties

In this paper, spherical calcium carbonate particles were prepared by using CaCl₂ aqueous solution + NH₃·H₂O + polyoxyethylene octyl phenol ether-10 (OP-10) + n-butyl alcohol + cyclohexane inverse micro emulsion system. Then, nanoscale spherical silica was deposited on the surface of micron calcium carbonate by Stöber method to form the composite material. Scanning electron microscope (SEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) were used to characterize the morphology and structure of the composite material. It is found that the surface of the composite material has a micro-nano complex structure similar to the surface of a “lotus leaf”, making the composite material show hydrophobicity. The contact angle of the cubic calcium carbonate, spherical calcium carbonate and CaCO₃@SiO₂ composite material were measured. They were 51.6°, 73.5°, and 76.8°, respectively. After modification with stearic acid, the contact angle of cubic and spherical CaCO₃ were 127.1° and 136.1°, respectively, while the contact angle of CaCO₃@SiO₂ composite was 151.3°. These results showed that CaCO₃@SiO₂ composite had good superhydrophobicity, and the influence of material roughness on its hydrophobicity was investigated using the Cassie model theory.     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

Rate equation of the carbothermic reduction of zinc sulfide in the presence of calcium oxide and lithium carbonate

The kinetics of the carbothermic reduction of zinc sulfide in the presence of calcium oxide and lithium carbonate has been studied by a thermogravimetric analyzer (TGA). An empirical rate expression of zinc yield has been determined from the experimental data obtained. The dependencies of the rate of zinc yield on the operating variables was found to be less pronounced for the Li₂CO₃ catalyzed system than those for uncatalyzed system.     

iPP Based Nanocomposites Filled with Calcium Carbonate Nanoparticles: Structure/Properties Relationships

Isotactic polypropylene (iPP) based nanocomposites filled with calcium carbonate nanoparticles (CaCO₃) were prepared by melt mixing and structure-properties relationships of the nanomaterials were studied. Elongated CaCO₃ nanopowders coated with two different coating agents, polypropylene-maleic anhydride graft copolymer (iPP-g-MA) and fatty acids (FA), were tested as nanoreinforced phases. The influence of surface treatment of the nanoparticles on the polymer/nanofillers interfacial adhesion and on the final materials properties was investigated. Morphological analysis showed that the selected coating agents induce different iPP/nanofiller adhesion degrees. Young's modulus increases as a function of the nanoparticles content and the coating agent nature. Finally, all the prepared nanocomposites showed a significant improvement of iPP barrier properties either to oxygen or to carbon dioxide.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Covering of nanometric calcite with α-cyclodextrin

In the present experiments, the monodisperse calcium carbonate nanoparticles obtained in the reactor (three-phase reaction) with rotating discs have been covered with α-cyclodextrin. Both pure CaCO₃ nanoparticle and α-cyclodextrin-coated CaCO₃ powders were deeply analysed by the use of the scanning electron microscope, the dynamic light scattering and the thermogravimetric method. The experimental data have allowed for determination of effective diameter of the obtained particles (aggregates of ca. 30 nm single crystals) and their size distribution (almost monodisperse—ca. 390 nm) as well as for distinction between α-cyclodextrin molecules present on calcite surface or free α-cyclodextrin molecules if presented in the sample. It was found that the nanometric CaCO₃ obtained in the reactor with rotating discs can be covered with a maximum of 1.15% α-cyclodextrin monolayer. The maximal coverage of the CaCO₃ calcite particles with α-cyclodextrin can be done by 24-h shaking of 50 mg nanometric calcium carbonate with 25 mg of 36.79 mM α-cyclodextrin aqueous solution.

     

Influence of CaCO<Subscript>3</Subscript> nanoparticles shape on thermal and crystallization behavior of isotactic polypropylene based nanocomposites

Summary The influence of calcium carbonate nanoparticles with different shapes (spherical and elongated) on the thermal properties and crystallization behavior of isotactic polypropylene was investigated. CaCO₃ nanoparticles were covered by an appropriate coating agent to improve the interfacial adhesion between the filler and the polyolefin matrix. The nanocomposites were prepared by melt mixing and subsequent compression molding. A remarkable effect of CaCO₃ on the thermal properties of iPP was observed. Moreover, the analysis of crystallization kinetics showed that CaCO₃ nanopowder coated with PP-MA are efficient nucleating agents for iPP, and the overall crystallization rate results higher than plain iPP.     

Nylon Based Nanocomposites: Influence of Calcium Carbonate Nanoparticles on the Thermal Stability

In this paper thermal and thermo-oxidative stability of nylon 6 based nanocomposites containing up to 5% by weight of fatty acid coated calcium carbonate (CaCO₃) nanoparticles is studied. Thermal stability of compression-moulded samples was evaluated by thermogravimetric analysis (TG) under air and nitrogen atmosphere. Kinetic analysis of TG data was performed by using the Flynn-Wall-Ozawa method. Results show that the presence of coated nanoparticles adversely affects the thermal and thermo-oxidative stability of nylon 6. Kinetic analysis shows that a complex, multi-step decomposition process occurs. Moreover, the presence of nanoparticles do not affect the rate limiting step of nylon 6 decomposition in air, while under nitrogen atmosphere the decomposition process occurs through a diffusion-driven regime in presence of high amounts of CaCO₃.     

Breakup promotion of deformed EPDM droplets by the migration of nanoparticles during extrusion

The effect of migration of calcium carbonate (CaCO₃) nanoparticles on the breakup dynamics of Ethylene-Propylene-Diene Monomer (EPDM) droplets in Polypropylene (PP) matrix during melt extrusion was investigated in situ. The breakup process of EPDM droplets was sped up dramatically when the migration of CaCO₃ nano-particles from dispersed phase to matrix was introduced to PP/EPDM melts. It was found that both the total breakup time and the shape stability of slender EPDM droplets decreased with the increase of CaCO₃ concentration. Both the maximum value in equivalent diameter d and aspect ratio AR of EPDM droplets were also reduced by increasing the composition of CaCO₃ nanoparticles. Results were discussed in consideration of interfacial tension and migration of CaCO₃ nanoparticles. Reduction in interfacial tension is mainly responsible for the improved breakup process in the two-step composites with CaCO₃ nanoparticles (<2 wt%). Higher composition of CaCO₃ (≥2 wt%) induced the CaCO₃ aggregates in the EPDM phase. These aggregates acted as stress concentration when the EPDM droplets break up.     

Effects of inorganic nanofillers on the thermal degradation and UV-absorbance properties of polyvinyl acetate

The effects of calcium carbonate (CaCO₃) and calcium sulfate (CaSO₄) nanoparticles on the thermal and UV-absorbing properties of polyvinyl acetate (PVAc) were analyzed in this study. Nanoparticles of CaCO₃ and CaSO₄ were synthesized by in situ deposition technique. The size and shape of nanoparticles were recognized by X-ray diffraction and scanning electron microscope (SEM) analyses which confirmed that the particle was having a diameter of 25–33 nm. In this technique, the surface modification of nanoparticles was done by non-ionic polymeric surfactant. PVAc/CaCO₃ and PVAc/CaSO₄ nanocomposites film samples with an average thickness of 30 µm and in the mass ratio of nanoparticles (0–4% (w/w)) were prepared by solution mixing technique. Chemical, structural, and elemental characterizations of nanocomposites were done by, fourier transform infrared, SEM, and energy dispersive X-ray spectroscopy analyses, respectively. Thermal properties of pure polymer and nanocomposites were characterized through differential scanning calorimetric, thermogravimetric, and differential thermogravimetry techniques. The glass transition temperature of nanocomposites increases with increase in content of nanoparticles. It may be due to the interaction between inorganic and organic components. The thermogravimetric analysis results indicate that the thermal degradation temperatures of nanocomposites were enhanced upon the addition of nanosized inorganic fillers. The thermal results show that PVAc/CaSO₄ nanocomposites were more thermally stable than PVAc/CaCO₃ nanocomposites. The addition of nanoparticles affects degradation mechanism and consequently improves thermal stability of PVAc. The reduction of polymer chain mobility and the tendency of nanoparticles to eliminate free radicals were the principal effects responsible for these enhancements. The ultraviolet–visible (UV–Vis) absorbance spectra of PVAc and its nanocomposites films show that the intensity of absorbance increases with increasing filling content, suggesting that nanocomposites films have greater UV-shielding property.     

Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9<Emphasis Type="Italic">H</Emphasis>-xanthene: Synthesis and Characterization

In this study a new series of magnetic and heat resistant nanocomposites were prepared based on a highly soluble poly(imide-ether) (PIE) reinforced with two different types of magnetic nanoparticles via a solution intercalation technique. New PIE with good solubility and desired molar mass containing bulky xanthene rings and amide groups in the side chains was synthesized via thermal cyclization of the poly(amic acid) precursor, obtained from the reaction of a new diamine derived from 9H-xanthene and 4,4′-oxydiphthalic dianhydride (ODPA). Improved solubility was attributed to the presence of xanthene group and flexible ether linkage in the polyimide backbones that reduce the chain-chain interaction and enhance solubility by penetrating solvent molecules into the polyimide chains. Fe₃O₄ nanoparticles (MNPs) which synthesized from chemical co-precipitation route were coated with silica (SiO₂), sequentially with (3-aminopropyl)triethoxysilane and poly-melamine-terephthaldehyde (MNPs-PMT), and then separately dispersed in the poly(amic acid) solutions and thermally imidized to form PIE/Fe₃O₄ and PIE/MNPs-PMT nanocomposites. The nanostructures and properties of the resultant materials were investigated using FTIR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The properties of the nanocomposites were strongly related to the dispersion and interaction between the nanoparticles and PIE matrix. The thermogravimetric analysis (TGA) results showed that the addition of MNPs-PMT nanoparticles resulted in a substantial increase in the thermal stability of the corresponding PIEN. The temperature at 10% weight loss (T₁₀) was increased from 416 °C to 428 °C for PIEN containing 3 wt% MNPs-PMT as compared to neat PIE, as well the char yield enhanced. Furthermore, the MNPs-PMT nanoparticles had better dispersion in the polymer matrix due to the strong intermolecular hydrogen bond interactions between the NH and C=N groups of surface-modified nanoparticles and the PIE matrix than the uncoated Fe₃O₄ nanoparticles, and exhibited a better intercalated morphology and improved thermal properties. Also, the PIEN nanocomposites under applied magnetic field exhibited the hysteretic loops of the superparamagnetic nature.     

PMMA Based Nanocomposites Filled with Modified CaCO3 Nanoparticles

PMMA based nanocomposites filled with calcium carbonate nanoparticles (CaCO₃) have been prepared by in situ polymerization approach. In order to improve inorganic nanofillers/polymer compatibility, PBA chains have been grafted onto CaCO₃ nanoparticle surface. Morphological analysis performed on nanocomposite fractured surfaces has revealed that the CaCO₃ modification induces homogeneous and fine dispersion of nanoparticles into PMMA as well as strong interfacial adhesion between the two phases. Mechanical tests have shown that both unmodified and modified CaCO₃ are responsible for an increase of the Young's Modulus, whereas only PBA-grafted nanoparticles allow to keep unchanged impact strength, strongly deteriorated by adding unmodified CaCO₃. Finally, the presence of CaCO₃ nanoparticles significantly improves the abrasion resistance of PMMA also modifying its wear mechanism.     

纳米TiO2表面接枝聚苯乙烯及其抗紫外老化研究

利用偶联剂γ-甲基丙烯酰氧基丙基三甲氧基硅烷(KH570)对纳米TiO₂进行表面预处理, 在此基础上通过分散聚合工艺制备聚苯乙烯(PSt)接枝包覆纳米TiO₂. 运用红外光谱、热重分析及透射电镜对处理前后纳米TiO₂进行了表征, 并通过紫外人工加速老化试验比较了表面处理前后纳米TiO₂对聚丙烯/聚苯乙烯(PP/PSt)体系的抗紫外老化性能. 结果显示: KH570与纳米TiO₂表面羟基进行了缩合, PSt在粒子表面实现了接枝聚合, 接枝率约为60% (w); PSt接枝包覆纳米TiO₂呈均匀的微球形, 纳米TiO₂被包覆于微球内部; PSt接枝包覆后纳米TiO₂在PP/PSt中的分散效果较改性前有显著的改进, 其抗紫外老化性能明显优于改性前体系.     

Diaqua oxalato strontium(II) complex as a precursor for facile fabrication of Ag-NPs@SrCO3, characterization,optical properties,morphological studies and adsorption efficiency

Diaqua oxalato strontium(II) complex [Sr(C₂O₄)(H₂O)₂] was prepared via a precipitation reaction. Thermal treatment of the as-synthesized precursor at 550?°C resulted in formation of strontium carbonate (SrCO₃) nanocrystals. A new composite of silver nanoparticles decorated with strontium carbonate (Ag-NPs@SrCO₃) was fabricated by heating a mixture of silver oxalate and strontium carbonate in air at 150?°C for 2?h. The spectral, morphological and thermal properties of the materials have been studied using different physicochemical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HR-TEM), Fourier infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), diffrential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). From the Debye–Scherrer equation the calculated particle size of Sr(C₂O₄)(H₂O)₂], SrCO₃ and Ag-NPs@SrCO₃ are 62.1, 58.7, and 58.5?nm, respectively. The SEM and TEM images indicate tetragonal structure of [Sr(C₂O₄)(H₂O)₂] while SrCO₃ and Ag-NPs@SrCO₃ appeared as cubic structures. The calculated energy band gap of SrCO₃ and Ag-NPs@SrCO₃ using the Tauc equation are estimated at 5.9 and 4.7?eV, respectively. The adsorption capacity of the materials is tested for the adsorption of Congo red anionic dye and exhibited promising results. The adsorption capacity followed the order Ag-NPs@SrCO₃>SrCO₃>?[Sr(C₂O₄)(H₂O)₂] with efficiencies of 73.90, 67.55, and 60.50%, respectively.     

The role of the trivalent metal in an LDH: Synthesis, characterization and fire properties of thermally stable PMMA/LDH systems

Two layered double hydroxides (LDHs), calcium aluminum undecenoate (Ca₃Al) and calcium iron undecenoate (Ca₃Fe), have been prepared by the co-precipitation method. XRD analysis of these LDHs reveals that they are layered materials and FT-IR and TGA confirmed the presence of the undecenoate anions in the material produced. The PMMA composites were prepared by bulk polymerization and the samples were characterized by XRD, TEM, TGA and cone calorimetry. Both additives greatly enhance the thermal stability of PMMA, while the calcium aluminum LDH gives better results when the fire properties were examined using the cone calorimeter.