The influence of vegetable oils on biosurfactant production by Serratia marcescens

The production of biosurfactant, a surface-active compound, by two Serratia marcescens strains was tested on minimal culture medium supplemented with vegetable oils, considering that it is well known that these compounds stimulate biosurfactant production. The vegetable oils tested included soybean, olive, castor, sunflower, and coconut fat. The results showed a decrease in surface tension of the culture medium without oil from 64.54 to 29.57, with a critical micelle dilution (CMD⁻¹) and CMD⁻² of 41.77 and 68.92 mN/m, respectively. Sunflower oil gave the best results (29.75 mN/m) with a CMD⁻¹ and CMD⁻² of 36.69 and 51.41 mN/m, respectively. Sunflower oil contains about 60% of linoleic acid. The addition of linoleic acid decreased the surface tension from 53.70 to 28.39, with a CMD⁻¹ of 29.72 and CMD⁻² of 37.97, suggesting that this fatty acid stimulates the biosurfactant production by the LB006 strain. In addition, the crude precipitate surfactant reduced the surface tension of water from 72.00 to 28.70 mN/m. These results suggest that the sunflower oil’s linoleic acid was responsible for the increase in biosurfactant production by the LB006 strain.     

Chitosan microspheres as a delivery system for nasal insufflation

The strain SmSA, identified as Serratia marcescens and known as a biosurfactant producer, was isolated from hydrocarbon contaminated soil from Veracruz, México. The interactions among the C/N, C/Mg and C/Fe ratios have not been examined for this microorganism. In this work was evaluated the effect of these nutrients at three levels using a mineral medium with glucose as the carbon source. A Box-Behnken experimental design was utilised to maximise biosurfactant production, which was assessed by oil spreading and surface tension tests. The treatment with C/N=5, C/Fe=26,000 and C/Mg=30 showed the best result since the surface tension was reduced to 30 mN m(-1). The multiple regression and response surface analyses indicated that the interaction between C/N and C/Mg had the utmost effect on the reduction of surface tension and biosurfactant production. The conditions of the best treatment were used to scale up biosurfactant production in a 3L bioreactor giving a yield of 4.1 gL(-1) of pure biosurfactant. It was found that the biosurfactant was mainly produced in the exponential phase and decreased the surface tension to 31 mN m(-1). The contact between the biosurfactant with heavy oil (15° API) increased its displacement from 9.3 to 18 cm.     

Lipopeptide surfactant production by Bacillus subtilis grown on low-cost raw materials

The production of biosurfactant by Bacillus subtilis ATCC 6633 was investigated using commercial sugar, sugarcane juice and cane molasses, sugarcane juice alcohol stillage, glycerol, mannitol, and soybean oil. Commercial sugar generated the minimum values of surface tension, with the best results (28.7 mN/m, (relative critical micelle concentration [CMC⁻¹] of 78.6) being achieved with 10 g of substrate/L in 48 h. At a pH between 7.0 and 8.0, a higher production of surface-active compounds and a greater emulsifier activity was also observed. Enrichment of the culture medium with trace minerals and EDTA showed maximum yields, whereas supplementation with yeast extract stimulated only cell growth. The kinetic studies revealed that biosurfactant production is a cell growth-associated process; surface tension, CMC, and emulsification index values of 29.6 dyn/cm, 82.3, and 57%, respectively, were achieved, thus indicating that it is feasible to produce biosurfactants from a renewable and low-cost carbon source.     

Purification of the total steroidal saponins from fenugreek seeds (Trigonella foenum-graecum L.) using aqueous two-phase system and determination of diosgenin content using micellar electrokinetic chromatography method

The total steroidal saponins, particularly its major steroidal sapogenin (diosgenin), are the main active principles of fenugreek seed extract. In this study, an ethanol-salt aqueous two-phase system (ATPS) was explored for the purification of the total steroidal saponins, and the process conditions were optimized by response surface methodology (RSM). Under the optimized conditions, the RSM predicted recovery of the total steroidal saponins in the top phase of ATPS was 97.9%, which agreed with the average experimental recovery (98.3 ± 4.2% (n = 6)). Moreover, a rapid micellar electrokinetic chromatography (MEKC) method was developed for the determination of diosgenin from extracts. The diosgenin content in the ATPS top phase extract was 3-fold higher than that in crude extract, suggesting this ATPS having a great potential for purification pharmacological active ingredients from fenugreek seeds.     

Synthesis of novel oil-soluble fluorinated surfactants via Wittig-Horner reaction

In this paper, the synthesis and characterization of novel oil-soluble fluorinated surfactants were reported. Both Wittig and Wittig-Horner reaction were used for constructing the perfluorinated branch-chain structure, and the latter provided a better method through a three-step synthesis route which was easy worked up and low cost. The surface tension of novel products in toluene, n-hexane and nitromethane with concentrations of 0.1?mol/L, 0.05?mol/L, 0.025?mol/L, 0.0125?mol/L, 0.00625?mol/L and 0?mol/L were examined. The surface tension research of these surfactants showed that they can reduce the surface tension of organic reagents dramatically. For example, compound 1e can reduce the surface tension of nitromethane from 36.6?mN/m to 24.2?mN/m in the concentration of 0.1?mol/L, and the surface tension of toluene was reduced from 28.0?mN/m to 22.7?mN/m when the concentration of compound 1a was 0.1?mol/L.     

Synthesis and properties of α-sulfo carboxyl disodium salt

The synthesis and properties of α-sulfo carboxyl disodium salt (SCDS) were studied in detail for the first time in this paper. SCDS was synthesized via saponification reaction of fatty acid methyl ester sulfonate sodium (MES). FT-IR was used to characterize the molecular structure of target product. The yield of disodium salt was greater than 98% by two-phase titration. The performance of SCDS was studied and was compared with raw materials MES, conventional anionic surfactant AES and nonionic surfactant AEO₉. The result shows SCDS can reduce the surface tension of the solution to 27.89?mN/m at critical micelle concentration (CMC). The wetting ability of SCDS was significantly enhanced with the increase of temperature. The emulsification effect of SCDS on the soybean oil is better than that on the liquid paraffin. Surprisingly, SCDS has a good foamability and foaming stability.     

CMC系列高分子表面活性剂与原油超低界面张力形成机理的研究

采用动态激光光散射及环境扫描电镜研究了羧甲基纤维素系列高分子表面活性剂与大庆原油形成超低界面张力的机理.结果表明,CMC系列高分子表面活性剂具有与低分子量表面活性剂相比拟的表/界面活性,其水溶液的表面张力可达2835mN/m,界面张力达到10^-110mN/m.碱的加入可显著降低高分子表面活性剂与原油的界面张力,在适当条件下界面张力达到超低值(10^-3mN/m),可望作为三次采油的驱油剂.等效烷烃模型研究表明,用碱与原油酸性组分的作用来解释碱能使界面张力下降至超低值的传统观点是不完善的,加入碱能使高分子表面活性剂胶束解缔,胶束数量增多,胶束粒径减小,单分子自由链增加,有利于高分子表面活性剂向界面迁移和排布,这是高分子表面活性剂和碱复配体系与原油界面张力下降至超低值的主要原因.     

Biosurfactants production by Pseudomonas aeruginosa FR using palm oil

Biosurfactants production by a strain of Pseudomonas aeruginosa using palm oil as a sole carbon source was investigated. The experiments were carried out in 500-mL conical flasks containing 100 mL of mineral media supplemented with palm oil as the sole carbon source. The P. aeruginosa FR strain was able to reduce surface tension of three tested inorganic media. Rotation velocities from 100 to 150 rpm provided free-cell fermented media with the lowest surface tension of approx 33 mN/m. Emulsification index results of even 100% were achieved when diesel was used as oil phase. Eight surface-active compounds produced by the bacterium were identified by mass spectrometry.     

阴离子孪连表面活性剂的合成及其表/界面活性研究

合成了疏水链长度不同和连接基长度不同的7种系列阴离子孪连表面活性剂,研究了它们的表/界面活性。结果表明,它们有较低的表面张力和临界胶束浓度(CMC),有很好的表面活性。它们的CMC都在10-5~10-6mol/L之间,表面张力在26·5~34mN/m之间。它们有非常好的抗一价、二价盐的能力。除了C16-C2-C16在高于5%的NaCl溶液中会产生析出外,其余孪连表面活性剂都能耐盐20%以上。随着盐浓度的增加,孪连表面活性剂与烷烃间的界面张力逐渐降低,能达到10-3mN/m。与中原油田原油间的界面张力能降低到10-3~10-4mN/m,表明它们可应用于特高矿化度油藏提高采收率。     

Lung surfactant dysfunction in tuberculosis: effect of mycobacterial tubercular lipids on dipalmitoylphosphatidylcholine surface activity

In pulmonary tuberculosis, Mycobacterium tuberculosis bacteria reside in the alveoli and are in close proximity with the alveolar surfactant. Mycolic acid in its free form and as cord factor, constitute the major lipids of the mycobacterial cell wall. They can detach from the bacteria easily and are known to be moderately surface active. We hypothesize that these surface-active mycobacterial cell wall lipids could interact with the pulmonary surfactant and result in lung surfactant dysfunction. In this study, the major phospholipid of the lung surfactant, dipalmitoylphosphatidylcholine (DPPC) and binary mixtures of DPPC:phosphatidylglycerol (PG) in 9:1 and 7:3 ratios were modelled as lung surfactant monolayers and the inhibitory potential of mycolic acid and cord factor on the surface activity of DPPC and DPPC:PG mixtures was evaluated using Langmuir monolayers. The mycobacterial lipids caused common profile changes in all the isotherms: increase in minimum surface tension, compressibility and percentage area change required for change in surface tension from 30 to 10 mN/m. Higher minimum surface tension values were achieved in the presence of mycolic acid (18.2 ± 0.7 mN/m) and cord factor (13.28 ± 1.2 mN/m) as compared to 0 mN/m, achieved by pure DPPC film. Similarly higher values of compressibility (0.375 ± 0.005 m/mN for mycolic acid:DPPC and 0.197 ± 0.003 m/mN for cord factor:DPPC monolayers) were obtained in presence of mycolic acid and cord factor. Thus, mycolic acid and cord factor were said to be inhibitory towards lung surfactant phospholipids. Higher surface tension and compressibility values in presence of tubercular lipids are suggestive of an unstable and fluid surfactant film, which will fail to achieve low surface tensions and can contribute to alveolar collapse in patients suffering from pulmonary tuberculosis. In conclusion a biophysical inhibition of lung surfactant may play a role in the pathogenesis of tuberculosis and may serve as a target for the development of new drug loaded surfactants for this condition.     

The surface tension of aqueous polyvinylamine and copolymers with <Emphasis Type="Italic">N</Emphasis>-vinylformamide

 The surface tensions of aqueous poly(N-vinylformamide) (PNVF), polyvinylamine (PVAM), and PNVF–PVAM copolymers were measured as functions of pH. The nonionic PNVF gave a pH-independent surface tension of 68 mN/m. The surface tension of PVAM was pH dependent; at pH 10 it was 56 mN/m, whereas it was 71.5 mN/m at pH 3.5. The transition from higher to lower surface tension values occurred most dramatically between pH 8 and 9, reflecting the dissociation behavior of the amine groups. The copolymers showed intermediate behavior. Received: 20 August 2001 Accepted: 26 September 2001     

Surface rheology of saponin adsorption layers

Extracts of the Quillaja saponaria tree contain natural surfactant molecules called saponins that very efficiently stabilize foams and emulsions. Therefore, such extracts are widely used in several technologies. In addition, saponins have demonstrated nontrivial bioactivity and are currently used as essential ingredients in vaccines, food supplements, and other health products. Previous preliminary studies showed that saponins have some peculiar surface properties, such as a very high surface modulus, that may have an important impact on the mechanisms of foam and emulsion stabilization. Here we present a detailed characterization of the main surface properties of highly purified aqueous extracts of Quillaja saponins. Surface tension isotherms showed that the purified Quillaja saponins behave as nonionic surfactants with a relatively high cmc (0.025 wt %). The saponin adsorption isotherm is described well by the Volmer equation, with an area per molecule of close to 1 nm(2). By comparing this area to the molecular dimensions, we deduce that the hydrophobic triterpenoid rings of the saponin molecules lie parallel to the air-water interface, with the hydrophilic glucoside tails protruding into the aqueous phase. Upon small deformation, the saponin adsorption layers exhibit a very high surface dilatational elasticity (280 ± 30 mN/m), a much lower shear elasticity (26 ± 15 mN/m), and a negligible true dilatational surface viscosity. The measured dilatational elasticity is in very good agreement with the theoretical predictions of the Volmer adsorption model (260 mN/m). The measured characteristic adsorption time of the saponin molecules is 4 to 5 orders of magnitude longer than that predicted theoretically for diffusion-controlled adsorption, which means that the saponin adsorption is barrier-controlled around and above the cmc. The perturbed saponin layers relax toward equilibrium in a complex manner, with several relaxation times, the longest of them being around 3 min. Molecular interpretations of the observed trends are proposed when possible. Surprisingly, in the course of our study we found experimentally that the drop shape analysis method (DSA method) shows a systematically lower surface elasticity, in comparison with the other two methods used: Langmuir trough and capillary pressure tensiometry with spherical drops. The possible reasons for the observed discrepancy are discussed, and the final conclusion is that the DSA method has specific problems and may give incorrect results when applied to study the dynamic properties of systems with high surface elasticity, such as adsorption layers of saponins, lipids, fatty acids, solid particles, and some proteins. The last conclusion is particularly important because the DSA method recently became the preferred method for the characterization of fluid interfaces because of its convenience.     

Biosurfactants production by Pseudomonas aeruginosa FR using palm oil

Biosurfactants production by a strain of Pseudomonas aeruginosa using palm oil as a sole carbon source was investigated. The experiments were carried out in 500-mL conical flasks containing 100 mL of mineral media supplemented with palm oil as the sole carbon source. The P. aeruginosa FR strain was able to reduce surface tension of three tested inorganic media. Rotation velocities from 100 to 150 rpm provided free-cell fermented media with the lowest surface tension of approx 33 mN/m. Emulsification index results of even 100% were achieved when diesel was used as oil phase. Eight surface-active compounds produced by the bacterium were identified by mass spectrometry.     

Mimic oil recovery with a SDBS–dodecane–silica gel system

The wettability of the solid powder of silica gel was determined via a modified Washburn equation expressed as contact angles. The interfacial tension (γ) between the dodecane and the dilute sodium dodecyl benzene sulfonate (SDBS) aqueous solution was obtained using the spinning drop (γ<10 mN m⁻¹) or drop volume methods (γ>10 mN m⁻¹). Contact angle changes for SDBS aqueous solutions on the surface of a silica gel powder were studied. The average aggregation number of SDBS micelles in aqueous solution was determined using the fluorescence quenching method. The relationship between the wettability of the powder surface, the critical micelle concentration (CMC) of SDBS and the mimic oil recovery of the resident oil on the powder surface has been explored. It has been found that good residual oil recovery was achieved by surface wettability changes at the interfacial tensions around 4–5 mN m⁻¹, which is far from the ‘ultra low’ condition (≤10⁻³ mN m⁻¹).     

Interfacial energetics of protein adsorption from aqueous buffer to surfaces with varying hydrophilicity

Adsorption isotherms constructed from time-and-concentration-dependent advancing contact angles thetaa show that the profound biochemical diversity among ten different blood proteins with molecular weight spanning 10-1000 kDa has little discernible effect on the amount adsorbed from aqueous phosphate-buffered saline (PBS) solution after 1 h contact with a particular test surface selected from the full range of observable water wettability (as quantified by PBS adhesion tension tauoa=gammaolv cos thetaoa; where gammaolv is the liquid-vapor interfacial tension and thetaoa is the advancing PBS contact angle). The maximum advancing spreading pressure, Pimaxa, determined from adsorption isotherms decreases systematically with tauoa for methyl-terminated self-assembled monolayers (CH3 SAM, tauo=-15 mN/m), polystyrene spun-coated onto electronic-grade SiOx wafers (PS, tauo=7.2 mN/m), aminopropyltriethoxysilane-treated SiOx surfaces (APTES, tauo = 42 mN/m), and fully water wettable SiOx (tauo=72 mN/m). Likewise, the apparent Gibbs' surface excess [Gammasl-Gammasv], which measures the difference in the amount of protein adsorbed Gamma (mol/cm2) at solid-vapor (SV) and solid-liquid (SL) interfaces, decreases with tauo from maximal values measured on the CH3 SAM surface through zero (no protein adsorption in excess of bulk solution concentration) near tauo=30 mN/m (thetaa=65 degrees). These latter results corroborate the conclusion drawn from independent studies that water is too strongly bound to surfaces with tauo>or=30 mN/m to be displaced by adsorbing protein and that, as a consequence, protein does not accumulate within the interfacial region of such surfaces at concentrations exceeding that of bulk solution ([Gammasl-Gammasv]=0 at tauo=30 mN/m). Results are collectively interpreted to mean that water controls protein adsorption to surfaces and that the mechanism of protein adsorption can be understood from this perspective for a diverse set of proteins with very different amino acid compositions.     

Adsorption of lysozyme to phospholipid and meibomian lipid monolayer films

It is believed that a lipid layer forms the outer layer of the pre-ocular tear film and this layer helps maintain tear film stability by lowering its surface tension. Proteins of the aqueous layer of the tear film (beneath the lipid layer) may also contribute to reducing surface tension by adsorbing to, or penetrating the lipid layer. The purpose of this study was to compare the penetration of lysozyme, a tear protein, into films of meibomian lipids and phospholipids held at different surface pressures to determine if lysozyme were part of the surface layer of the tear film. Films of meibomian lipids or phospholipids were spread onto the surface of a buffered aqueous subphase. Films were compressed to particular pressures and lysozyme was injected into the subphase. Changes in surface pressure were monitored to determine adsorption or penetration of lysozyme into the surface film. Lysozyme penetrated a meibomian lipid film at all pressures tested (max = 20 mN/m). It also penetrated phosphatidylglycerol, phosphatidylserine or phosphatidylethanolamine lipid films up to a pressure of 20 mN/m. It was not able to penetrate a phosphatidylcholine film at pressures ≥10 mN/m irrespective of the temperature being at 20 or 37 °C. However, it was able to penetrate it at very low pressures (<10 mN/m). Epifluorescence microscopy showed that the protein either adsorbs to or penetrates the lipid layer and the pattern of mixing depended upon the lipid at the surface. These results indicate that lysozyme is present at the surface of the tear film where it contributes to decreasing the surface tension by adsorbing and penetrating the meibomian lipids. Thus it helps to stabilize the tear film.     

N,N-二羟乙基十二烷基胺的合成及性能

以二乙醇胺和溴代十二烷为原料,在无水乙醇介质中合成了脱模剂用新型原材料N,N-二羟乙基十二烷基胺.通过正交试验法对合成工艺进行了优化,研究了各种因素对合成产率的影响,确定了在无水乙醇介质中合成该化合物的最佳工艺条件;表征了合成产物的结构,并测定了其理化性能和表面化学性能.结果表明:在无水乙醇介质中合成N,N-二羟乙基十二烷基胺简单易行,产率为85.37%.合成产物在水溶液中的临界胶束浓度为2.92×10-3mol/L,所对应的液体表面张力为20.875 mN/m.以合成产物为原材料制备的固化薄膜的表面能为14.57 mN/m,小于聚氨酯塑料的表面能29 mN/m,是聚氨酯塑料和弹性体脱模剂的理想原材料.     

Effects of albumin and erythrocyte membranes on spread monolayers of lung surfactant lipids

Dipalmitoyl phosphatidylcholine (DPPC), one of the main constituents of lung surfactant is mainly responsible for reduction of surface tension to near 0 mN/m during expiration, resisting alveolar collapse. Other unsaturated phospholipids like palmitoyloleoyl phosphatidylglycerol (PG), palmitoyloleoyl phosphatidylcholine (POPC) and neutral lipids help in adsorption of lung surfactant to the air-aqueous interface. Lung surfactant lipids may interact with plasma proteins and hematological agents flooding the alveoli in diseased states. In this study, we evaluated the effects of albumin and erythrocyte membranes on spread films of DPPC alone and mixtures of DPPC with each of PG, POPC, palmitoyloleoyl phosphatidylethanolamine (PE), cholesterol (CHOL) and palmitic acid (PA) in 9:1 molar ratios. Surface tension-area isotherms were recorded using a Langmuir-Blodgett (LB) trough at 37 degrees C with 0.9% saline as the sub-phase. In the presence of erythrocyte membranes, DPPC and DPPC+PA monolayers reached minimum surface tensions of 7.3+/-0.9 and 9.6+/-1.4 mN/m, respectively. Other lipid combinations reached significantly higher minimum surface tensions >18 mN/m in presence of membranes (Newman Keul's test, p<0.05). The relative susceptibility to membrane inhibition was [(DPPC+PG, 7:3)=(DPPC+PG, 9:1)=(DPPC+POPC)=(DPPC+PE)=(DPPC+CHOL)]>[(DPPC+PA)=(DPPC)]. The differential response was more pronounced in case of albumin with DPPC and DPPC+PA monolayers reaching minimum surface tensions less than 2.4 mN/m in presence of albumin, whereas DPPC+PG and DPPC+POPC reached minimum surface tensions of around 20 mN/m in presence of albumin. Descending order of susceptibility of the spread monolayers of lipid mixtures to albumin destabilization was as follows: [(DPPC+PG, 7:3)=(DPPC+PG, 9:1)=(DPPC+POPC)]>[(DPPC+PE)=(DPPC+CHOL)]>[(DPPC+PA)=(DPPC)] The increase in minimum surface tension in presence of albumin and erythrocyte membranes was accompanied by sudden increases in compressibility at surface tensions of 15-30 mN/m. This suggests a monolayer destabilization and could be indicative of phase transitions in the mixed lipid films due to the presence of the hydrophobic constituents of erythrocyte membranes.     

Interfacial activity of a novel family of polymeric surfactants

A novel series of polymeric surfactants based on carboxy methyl cellulose and alkyl poly(etheroxy) acrylate were synthesized by ultrasonic irradiation. These polymeric surfactants have exhibit excellent surface activity due to their unique structure. The influences of salt, alcohol and alkali on the interfacial activity of these polymeric surfactants were studied by interfacial tensiometery, dynamic laser scattering (DLS), UV spectroscope and environmental scanning electrical microscope (ESEM). The surface tension and interfacial tension (IFT) properties change little with NaCl added. The formed micelles shrink, their size becomes smaller. Alcohols cause the IFT to decrease a little because a small amount of free chains present in solution. Under the influence of added alkali, the IFT of the polymeric surfactants, in aqueous solution, decreases so much that sometimes it is less than 10⁻² mN/m. Using data from the equivalent alkane scan, one cannot draw the conclusion that the action of alkali with the acidic components in crude oil leads to the ultra-low IFT. The analyses by UV, DLS and ESEM show that the micelles formed by polymeric surfactants could be disaggregated or destroyed sharply by the action of alkali. So the size of micelles decreases greatly and the number of free chains increases. That more polymeric surfactants molecules move to the interface of oil/water and rearrange at the interface of oil/water is believed to be the main reason of the ultra-low IFT (10⁻³ mN/m) that is obtained.     

新型磺基甜菜碱/聚丙烯酰胺体系表面及界面性能

采用自制的新型磺基甜菜碱两性表面活性剂与相对分子质量2500万的聚丙烯酰胺进行复配,考察了不同温度和矿化度条件下,聚合物对复配溶液表面、界面性能的影响。 采用滴体积法测定了溶液的表面张力,结果表明,加入聚合物使溶液的临界胶束浓度增大,且复配溶液的表面张力大于单独表面活性剂溶液的表面张力。 当聚合物浓度一定,增大溶液矿化度时,体系表面张力增大。 用旋滴型界面张力仪测定了溶液的界面张力,结果表明,增大聚合物浓度,油水界面张力增大,增大溶液矿化度,油水界面张力有所升高。 聚合物质量浓度为1.5 g/L,表面活性剂质量浓度为0.3 g/L时,可使胜利油田孤岛原油和孤东原油的油水界面张力达到超低数量级（10-3 mN/m）。 用分水时间法测定了溶液的乳化性能,结果表明,聚合物浓度增大,分水时间延长,并考察了75、85和95 ℃条件下体系的乳化性能,温度越高,分水时间越短。