共查询到20条相似文献,搜索用时 31 毫秒
1.
《Arabian Journal of Chemistry》2022,15(10):104146
BackgroundHydrocolloids are hydrophilic biopolymers which are widely used in the food industry due to their functional properties. In the present study, sesame hydrocolloids (Sesamum indicum) were obtained and, consequently, their physicochemical, proximal composition, functional, and rheological properties were evaluated to establish their potential applications in the food industry. Methods: Hydrocolloids were obtained from sesame seeds at 80 °C on evaluating the pH at 3, 7, and 10 and specific flour: water ratios during the solubilization process. Results: The hydrocolloids obtained had a good relationship between carbohydrates and proteins, which increased their potential use in the development of colloidal systems. The samples had high water holding capacity, solubility, and appropriate emulsifying and foaming properties. The hydrocolloids showed non-Newtonian shear-thinning behavior, adjusted to the Carreau-Yasuda model. Based on the dynamic viscoelastic rheological test, samples were characterized as a gel-like state when storage modulus values were higher than the loss modulus in the frequency and temperature ranges investigated. Conclusion: The findings revealed that sesame seeds can be considered appropriate raw material for extracting hydrocolloids as an alternative for obtaining natural food ingredients with interesting functional and rheological properties, with further applications in the development and formulation of micro-structured products. 相似文献
2.
There is great interest in the food, cosmetic and pharmaceutical industry in the use of proteins and polysaccharides as natural hydrocolloids to create novel emulsion systems with improved stability and functionality. For example, the electrostatic interaction between proteins and polysaccharides may be used to form oil-in-water (O/W) emulsions with multilayered interfacial membranes around oil droplets or multilayer emulsions. This type of emulsions have been developed using the layer-by-layer (LbL) technique, which consists of direct adsorption of an oppositely charged polyelectrolyte layer (e.g. polysaccharides) on a primary layer of ionic emulsifiers (e.g. proteins). The polymeric structure and electrical charge of proteins make them a special class of compounds very suitable for its utilization in the LbL technique. In recent years, the utilization of proteins as emulsifiers in food and pharmaceutical industry has been turning towards plants as a preferred alternative to animal-based sources. This article reviews the current understanding of the utilization of different vegetable proteins as emulsifier in order to stabilize O/W multilayer emulsion systems. Additionally, it highlights some potential applications of the multilayer emulsion technology in the industry, for improving the stability of emulsions to environmental stresses and for developing controlled or triggered release systems. 相似文献
3.
Application of hydrocolloids as baking improvers 总被引:1,自引:0,他引:1
Hydrocolloids (or gums) belong to a group of biopolymers widely used in food technology. In the bakery industry, these compounds
help to improve food texture and moisture retention, to retard starch retrogradation, and, finally, to enlarge the overall
quality of the products during storage. Since recently, some hydrocolloids are being used due to their polymeric structure
as fat replacers to obtain low calorie products and to substitute gluten in the formulation of gluten-free breads. This study
describes the applications of some hydrocolloids in the bakery industry. Technological effects of these substances for different
types of bakery products are also discussed. 相似文献
4.
Axel Benichou Abraham Aserin Nissim Garti 《Journal of Dispersion Science and Technology》2013,34(1-3):93-123
Proteins, polysaccharides and their blends, as examples of natural biopolymers, are surface active materials. Biopolymers may be considered as amphiphilic macromolecules that play an essential role in stabilizing food formulations (foams, emulsions and dispersions). Under specific conditions (such as protein-to-polysaccharide ratio, pH, ionic strength, temperature, mixing processing), it has been stated that proteins and polysaccharides form hybrids (complexes) with enhanced functional properties in comparison to the proteins and polysaccharides alone. Different protein-polysaccharide pairs are reviewed with particular attention to the emulsification capability of their mixtures. In the case of uncomplexed blends of biopolymers, competitive adsorption onto hydrophobic surfaces is generally reported. Conversely, electrostatic complexation between oppositely charged proteins and polysaccharides allows better anchoring of the new-formed macro-molecular amphiphile onto oil-water interfaces. Moreover, improved thermal stability and increased resistance to external treatment (high pressure) involved in food processing are obtained. This review presents basic and applied knowledge on protein-polysaccharide interactions in aqueous medium and at the oil-water interface in food emulsion systems. Electrostatic interactions and thermodynamic incompatibility in mixed biopolymer solutions are correlated to the functional properties (rheology, surface hydrophobiciry, emulsification power) of these interesting blends. Basic and industrial selected systems of different families of hydrocolloids (as gum Arabic, galactomannans, pectins) and protein (caseins, whey, soya, gelatin) mixtures are reviewed. 相似文献
5.
Ng Sook Han Mohd. Basyaruddin Abd. Rahman Raja Noor Zaliha Raja Abd. Rahman Abu Bakar Salleh Zahariah Ismail 《Journal of Dispersion Science and Technology》2013,34(10):1428-1433
Palm oil esters (POEs) are wax esters derived from palm oil and cis-9-octadecen-1-ol. The excellent wetting behaviour of the esters without the oily feel make them have great potentials in the manufacture of cosmeceutical and pharmaceutical products. However, little is known about their phase behaviors in ternary systems. The purpose of this investigation was to construct phase diagram of the POEs and mixed surfactants and to consequently select nanoemulsions composition for further studies. The preparation and characterization of oil-in-water nanoemulsions stabilized by hydrocolloid gums were then studied. Two types of nonionic surfactants were selected, namely Tween 80 (T80) and Span 80 (S80). Ternary phase diagram of POEs:Tocotrienol/T80:S80 (80:20)/water system was constructed at 25.0 ± 0.5°C. The emulsification properties of 2 hydrocolloids gum (xanthan gum, carbopol ultrez 20 copolymer) were investigated. Gum dispersions were prepared in water (0.8%) and emulsified with 30% oil using a Polytron homogenizer. The flow curve of the emulsions always exhibited shear thinning behavior and obeys the power law viscosity. The emulsions with carbopol ultrez 20 copolymer was the most stable emulsions which composed of very small oil droplets (50% < 142.43 nm) with a narrow size distribution. 相似文献
6.
P. Sherman 《Colloid and polymer science》1959,165(2):156-161
Summary The viscosity of emulsions is affected by the concentration of emulsifying agent normally employed in their preparation. This
applies to both oil-in-water and water-in-oil systems. The effect is not constant for all emulsions that contain the same
constituents irrespective of volume concentration disperse phase. On the contrary, it increases as the emulsions become more
concentrated.
The magnitude of the change with increasing disperse phase concentration depends on the type of emulsion and the chemical
structure of the emulsifying agent.
An equation is proposed that relatesη
rel exponentially to both volume concentration of disperse phase and concentration of the emulsifying agent.
Zusammenfassung Die Viskosit?t von Emulsionen wird von der Konzentration des Emulgators beeinflu?t, der normalerweise zur Pr?paration notwendig ist. Dies gilt sowohl für ?l-in-Wasser- als Wasser-in-?l-Systeme. Der Effekt ist nicht für alle Emulsionen, die dieselben Bestandteile hinsichtlich der Volumenkonzentration der dispersen Phase enthalten, konstant. Im Gegenteil, er w?chst, wenn die Emulsionen konzentrierter werden. Die H?he der ?nderung mit ansteigender Konzentration an disperser Phase h?ngt vom Typus der Emulsion und der chemischen Struktur des Emulgators ab. Eine Gleichung wird vorgeschlagen, dieη rel exponentiell mit der Volumenkonzentration der dispersen Phase und der Konzentration des Emulgators in Beziehung setzt.相似文献
7.
Haojie Zhang Miao Lv Jianzhong Jiang Zhenggang Cui Wenshui Xia Bernard P. Binks 《Chemical science》2021,12(35):11845
Bile salts (BS), one of the biological amphiphiles, are usually used as solubilizing/emulsifying agents of lipids or drugs. However, BS such as sodium deoxycholate (NaDC) can''t stabilize an oil-in-water (O/W) emulsion alone due to its unusual molecular structure. In this paper we report that these emulsifiers with poor emulsifying ability can be transformed to highly efficient emulsifiers by combining with negatively charged particles (silica or montmorillonite). Both together can synergistically co-stabilize oil-in-water emulsions at extremely low concentrations (minimum 0.01 mM NaDC plus 0.003 wt% particles). Moreover, the emulsions can be reversibly switched between stable and unstable triggered by CO2/N2 at room temperature. This strategy is universal for emulsions containing different oils (alkanes, aromatic hydrocarbons and triglycerides) and for different BS and offers a generic model for a variety of BS of different molecular structure, which will extend their applications in more technical fields such as emulsion polymerization, biphasic catalysis and emulsion extraction.Bile salts can be converted to efficient emulsifiers assisted by a trace amount of similarly charged nanoparticles and the emulsions formed are CO2/N2 switchable at room temperature. 相似文献
8.
Gu YS Decker AE McClements DJ 《Langmuir : the ACS journal of surfaces and colloids》2005,21(13):5752-5760
The influence of environmental conditions (pH, NaCl, CaCl2, and temperature) on the properties and stability of oil-in-water (O/W) emulsions containing oil droplets surrounded by one-, two-, or three-layer interfacial membranes has been investigated. Three oil-in-water emulsions were prepared with the same droplet concentration and buffer (5 wt % corn oil, 5 mM phosphate buffer, pH 6) but with different biopolymers: (i) primary emulsion: 0.5 wt % beta-Lg; (ii) secondary emulsion: 0.5 wt % beta-Lg, 0.1 wt % iota-carrageenan; (iii) tertiary emulsion: 0.5 wt % beta-Lg, 0.1 wt % iota-carrageenan, 0-2 wt % gelatin. The secondary and tertiary emulsions were prepared by electrostatic deposition of the charged biopolymers onto the surfaces of the oil droplets so as to form two- and three-layer interfacial membranes, respectively. The stability of the emulsions to pH (3-8), sodium chloride (0-500 mM), calcium chloride (0-12 mM), and thermal processing (30-90 degrees C) was determined. We found that multilayer emulsions had better stability to droplet aggregation than single-layer emulsions under certain environmental conditions and that one or more of the biopolymer layers could be made to desorb from the droplet surfaces in response to specific environmental changes (e.g., high salt or high temperature). These results suggest that the interfacial engineering technology used in this study could lead to the creation of food emulsions with improved stability to environmental stresses or to emulsions with triggered release characteristics. 相似文献
9.
Hiromichi Sagitani 《Journal of Dispersion Science and Technology》2013,34(2):115-129
Surfactant-Phase Emulsification is a very useful method to produce oil-in-water emulsions having fine and uniform droplets. The mechanism of this emulsification method and the effect of hydrophile-lipophile balance (HLB) of the surfactants on the process of this emuisification were investigated by using phase diagrams of nonionic surfactant/hexadecane/water/1,3-butanediol four component systems. It was shown that the process of this emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant clear gel emulsion, and finally by formation of oil-in-water emulsion. By using this emulsification technique, fine oil-in-water emulsions were formed without a need for adjusting of HLB. 相似文献
10.
Like many other emulsifiers, whey protein concentrates stabilize oil-in-water emulsions. However, the emulsifying capacity of whey proteins is affected by several factors, e. g., type of homogenizer, degree of homogenization, protein concentration, oil volume fraction, pH and ionic strength of the aqueous phase. For the present study, oilin-water emulsions were made by homogenizing known amounts of whey protein concentrate with a vegetable oil (i. e. grapeseed oil) at different pH. The emulsifying properties of whey proteins are expressed as a function of the particle size and size distribution of oil droplets as measured by light scattering, and of the surface charge density derived from the electrophoretic mobility.The whey protein concentrate was shown to have an isoelectric point at pH 4.4. Near this pH value, the oil-in-water emulsions exhibited poor stability as expected from the low surface coverage. 相似文献
11.
Malek Bendjaballah Rabah Oumeddour 《Journal of Dispersion Science and Technology》2013,34(9):1260-1272
To find an optimal formulation of oil-in-water (O/W) emulsions (φo = 0.05), the effect of emulsifier nature and concentration, agitation speed, emulsifying time, storage temperature and their mutual interactions on the properties and behavior of these dispersions is evaluated by means of an experimental design (Nemrodw software). Long-term emulsion stability is monitored by multiple light scattering (Turbiscan ags) and acoustic attenuation spectroscopy (Ultrasizer). After matching surfactant HLB and oil required HLB, a model giving the Sauter diameter as a function of emulsifier concentration, agitation speed and emulsification time is proposed. The highest stability of C12E4-stabilized O/W emulsions is observed with 1% emulsifier. 相似文献
12.
Min-Hui Wu Hong Hai Yan Zhao-Qing Chen 《Journal of Dispersion Science and Technology》2017,38(10):1375-1380
The objective of this study was to investigate the effects of environmental stress and emulsifier types on the stability of curcumin emulsions. Results showed that Lecithin and Tween 80 presented good emulsifying capacity. The Tween 80 emulsion was the most stable among the four emulsions.The particle sizes of Tween 80 and whey protein emulsion were relatively smaller than gum arabic and lecithin. Extensive droplet aggregation appeared in whey protein-stabilized emulsions when the pH was approximately isoelectric point (pI) with salt concentration >200?mM. Lecithin emulsion was unstable when pH?≤?6 with salt concentration >100?mM. There was little impact of pH and ionic strength on gum arabic and Tween 80 emulsions. All of the emulsions were stable at temperatures from 30 to 90°C in the absence of salt. These results help characterize the emulsifying and stabilizing abilities of emulsifier types intended for applications in the food industry. 相似文献
13.
Manel Ouerfelli Isidoro Metn Idoia Codina-Torrella María Pilar Almajano 《Molecules (Basel, Switzerland)》2022,27(22)
The present study aims to identify and quantify the phenolic compounds of Azadirachta indica leaf extract using HPLC-MS and to evaluate the antioxidant, antibacterial (against different Gram-positive and negative bacteria) and in vitro anti-proliferative activities of this extract (against breast, human liver and cervix adenocarcinoma-derived cells). The application of this extract as a natural antioxidant for food preservation was also tested on oil-in-water food emulsions for the first time in the present work in order to determine the use of Azadirachta indica leaves as a natural additive to preserve the food against lipid oxidation and rancidity. The results obtained revealed that 50%-aqueous ethanol leaf extract showed the best extraction yield (25.14%), which was characterized by a high content in phenolic compounds and strong antioxidant activity. Moreover, this leaf extract inhibited the growth of the bacterial strains tested (Staphylococcus aureus, Escherichia coli, Salmonella paratyphi and Micrococcus luteus) and showed better anti-proliferative activity against breast and cervix adenocarcinoma-derived cells than human liver cancer cells after 48 h of treatment. Additionally, Azadirachta indica leaf extract showed almost similar effects as gallic acid solutions (0.25% and 0.5%) in preserving the oxidation of oil-in-water food emulsions and prevented the formation of secondary oxidation products (malondialdehyde) as well. The results obtained suggested that extracts of Azadirachta indica leaves are a potential source of antioxidant and antibacterial compounds and pointed to the potential of these natural extracts as therapeutic agents. 相似文献
14.
C. Ferrero M. N. Martino N. E. Zaritzky 《Journal of Thermal Analysis and Calorimetry》1996,47(5):1247-1266
Differential scanning calorimetry (DSC) was used to analyze the influence of different hydrocolloids (xanthan, guar, and locust bean gums, carboxymethylcellulose and sodium alginate) on the gelatinization of corn starch in systems with starch concentration ranging between 0.1 and 0.7 g starch/g mixture. The reduction of available water produced a shift in gelatinization temperature, especially of the conclusion temperature. The effect was more marked for ionic hydrocolloids. The influence of hydrocolloids on glass transition temperature (T
g) of gelatinized starch suspensions and on the glass transition temperature of the maximally freeze-concentrated solute/unfrozen water matrix (T
g) was also studied.T
g onset values ranged between –4.5 and –5.5C for corn starch pastes with and without hydrocolloids. Those hydrocolloids that increased the viscosity of the unfrozen matrix inhibited additional ice formation during thawing (devitrification).Starch concentration and final heating temperature were found to be relevant factors affecting the kinetics of amylopectin retrogradation during frozen storage at –4C. Xanthan gum failed to prevent amylopectin retrogradation; this observation could be attributed to the fact that gums act outside the starch granule, while amylopectin retrogradation takes place within the granule. 相似文献
15.
Cristián Huck-Iriart María Soledad Álvarez-Cerimedo Roberto Jorge Candal María Lidia Herrera 《Current Opinion in Colloid & Interface Science》2011,16(5):412-420
The physicochemical properties of emulsions play an important role in food systems as they directly contribute to texture, sensory and nutritional properties of foods. Sodium caseinate (NaCas) is a well-used ingredient because of its good solubility and emulsifying properties and its stability during heating. One of most significant aspects of any food emulsion is its stability. Among the methods used to study emulsion stability it may be mentioned visual observation, ultrasound profiling, microscopy, droplet size distribution, small deformation rheometry, measurement of surface concentration to characterize adsorbed protein at the interface, nuclear magnetic resonance, confocal microscopy, diffusing wave spectroscopy, and turbiscan. They have advantages and disadvantages and provide different insights into the destabilization mechanisms. Related to stability, the aspects more deeply investigated were the amount of NaCas used to prepare the emulsion, and specially the oil-to-protein ratio, the mobility of oil droplets and the interactions among emulsion components at the interface. It is known that the amount of protein required to stabilize oil-in-water emulsions depends, not only on the structure of protein at the interface, and the average diameters of the emulsion droplets, but also on the type of oils and the composition of the aqueous phase. Several authors have investigated the effect of a thickening agent or of a surface active molecule. Factors such as pH, temperature, and processing conditions during emulsion preparation are also very relevant to stability. There is a general agreement among authors that the most stable systems are obtained for conditions that produce size reduction of the droplets, an increase in viscosity of the continuous phase and structural changes in emulsions such as gelation. All these conditions decrease the molecular mobility and slow down phase separation. 相似文献
16.
Excellent stability of water-in-oil emulsions could be obtained by partial crosslinking of the fatty chain in several polyglycerol fatty esters. Such products were capable of emulsifying and stabilizing up to 50 wt% water in vegetable oils at a level of 3-5% emulsifier per total emulsion weight. The corresponding non-crosslinked products require at least 20-25% emulsifier to give the sane level of stability, with much higher viscosity. Degree of polymerization, molecular weight distribution, viscosity, dielectric constant and refractive index of the emulsifier were correlated to the emulsion stability. The most remarkable result is a clear correlation between the molecular weight of the emulsifier and emulsion stability; best emulsions were prepared with polymeric emulsifier with MW of Ca. 40000. 相似文献
17.
Emulsion forms a major part of many processed food formulations. During the past few decades, the physico-chemical properties of oil-in-water emulsions under various food processing conditions have been extensively studied. However, over the recent years, interest has turned to understanding the behaviour of emulsions during consumption, i.e. physiological processing. In general, on ingestion, an emulsion is exposed to a relatively narrow range of physical (e.g. shear and temperature) and biochemical (e.g. dilution, pH, pepsin, pancreatin, mucins and bile salts) environments as it passes through the mouth into the stomach and then the intestines. There is currently limited knowledge of the physico-chemical and structural changes, which an emulsion may undergo when it passes through the physiologically active regime. A better understanding of the gastro-intestinal processing of emulsions would allow manipulation of physico-chemical and interfacial properties to modulate lipid ingestion, improve bioavailability of lipid soluble nutrients and reduce absorption of saturated fats, cholesterol and trans fats.Food emulsions are commonly stabilised by proteins, as they are not only excellent emulsifiers but also provide nutritional benefits to the product. The effects of digestion conditions on interfacial protein structures are complicated because of potential breakdown of these structures by proteolytic enzymes of the gastrointestinal tract. Studies dealing directly with the behaviour of protein-based emulsions under digestion conditions are very limited. This paper provides an overview of the behaviour of oil-in-water emulsions stabilised with globular proteins, namely lactoferrin and β-lactoglobulin. Recent advances in understanding the interactions between interfacial proteins on oil droplets and various physiological materials (e.g. enzymes and bile salts) in in vitro digestion systems are considered. Major emphasis is placed on the recent work carried out in our laboratory at Massey University on the behaviour of milk protein based emulsions (lactoferrin or β-lactoglobulin) during their passage through the gastro-intestinal tract. 相似文献
18.
For different reasons, there is an increasing interest in plant-based foods as well as vegetarian and vegan dairy and meat alternatives. Frequently, those foods represent dispersed systems and more specifically food emulsions with proteins as emulsifying food ingredients. Owing to a very heterogeneous composition of plant proteins and a wide range of structural varieties in the proteins, it is worth discussing if our current understanding of interfacial and emulsifying properties of proteins is sufficient to meet the challenges associated with the utilisation of plant proteins for the stabilisation of food emulsions. To this purpose, we review the current understanding of the interfacial behaviour of proteins, summarise analytical techniques for their characterisation and critically discuss the available literature on oilseed and legume proteins to identify future research needs and opportunities for customised emulsion design. 相似文献
19.
Csaba Fehér 《Journal of carbohydrate chemistry》2013,32(5):251-284
AbstractL-arabinose is found in biopolymers such as hemicellulose, pectin, arabinogalactan-protein complexes, and polysaccharides of exudate plant gums. Recent studies have revealed many possible applications of L-arabinose in the fields of pharmaceutical, food and chemical industries. Novel approaches to obtain L-arabinose are focused on the utilization of lignocellulosic by-products, purified polysaccharides, and residual hydrolysates containing a mixture of sugars. L-arabinose can be released from lignocellulosic biomasses by acid-catalysed or enzymatic hydrolysis. L-arabinose-enriched solutions can be obtained from residual hydrolysates by yeast-mediated biopurification. The most promising, novel processes to obtain L-arabinose have combined the advantages of different methods but technological barriers still exist impeding the industrial implementation. 相似文献
20.
Nana Sun Huayi Jiang Xiaoxu Wang Kaibin Jin 《Journal of Dispersion Science and Technology》2018,39(3):411-422
The effects of the types and contents of surfactants, alkali types and concentrations, oil-water ratios, mixing speeds, and emulsifying temperatures on the rheology of heavy oil-in-water (O/W) emulsions were studied. The experimental results showed that the apparent viscosity increased as the formulated surfactant content increased. The organic/inorganic alkali played a twofold role in the apparent viscosity of the O/W emulsion, promoting the ionization of these interfacial active components and compressing the diffused double layer, the competition of which determined whether the apparent viscosity increased or decreased. With increasing oil-water ratios, the apparent viscosity increased, whereas an increase in the emulsifying temperature resulted in a decrease of the apparent viscosity. When the mixing speed was increased from 500 to 1000?r/min, the apparent viscosity increased. However, the apparent viscosity changed minimally for mixing speeds in the range of 1000–1500?r/min. To further discuss the impacts of these factors on the emulsion rheology and pressure drop, the results of an orthogonal test were analyzed through ANOVA using SPSS software; the pressure drops in the samples were calculated using Matlab software. The results demonstrated that the effects of the oil-water ratios on emulsion viscosity and pressure drop were the most prominent. 相似文献