Acrylic polymer/silica hybrids prepared by emulsifier‐free emulsion polymerization and the sol–gel process

Acrylic polymer/silica hybrids were prepared by emulsifier‐free emulsion polymerization and the sol–gel process. Acrylic polymer emulsions containing triethoxysilyl groups were synthesized by emulsifier‐free batch emulsion polymerization. The acrylic polymer/silica hybrid films prepared from the acrylic polymer emulsions and tetraethoxysilane (TEOS) were transparent and solvent‐resistant. Atomic force microscopy studies of the hybrid film surface suggested that the hybrid films did not contain large (e.g., micrometer‐size) silica particles, which could be formed because of the organic–inorganic phase separation. The Si? O? Si bond formed by the cocondensation of TEOS and the triethoxysilyl groups on the acrylic polymer increased the miscibility between the acrylic polymer component and the silica component in the hybrid films, in which the nanometer‐size silica domains (particles) were dispersed homogeneously in the acrylic polymer component. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 273–280, 2006     

Acrylic polymer/silica organic–inorganic hybrid emulsions for coating materials: Role of the silane coupling agent

Acrylic polymer/silica organic–inorganic hybrid emulsions were synthesized by a simple method, that is, a conventional emulsion polymerization and subsequent sol–gel process, to provide water‐based coating materials. The acrylic polymer emulsions contained a silane coupling agent monomer, such as methacryloxypropyltriethoxysilane, to form highly solvent‐resistant hybrid films. On the other hand, the hybrid films from the surface‐modified polymer emulsions, in which the silane coupling agent was located only on the surface of the polymer particles and the particle core was not crosslinked, did not exhibit high solvent resistance. A honeycomblike array structure, which was derived from the polymer particles (diameter ≈ 50 nm) and the silica domain, on the hybrid film surfaces was observed by atomic force microscopy. The crosslinked core part and silane coupling agent containing the shell part of the polymer particles played important roles in attaining high solvent resistance. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4736–4742, 2006     

Engineering hybrid microgels as particulate emulsifiers for reversible Pickering emulsions

Thermo-responsive microgels are unique stabilizers for stimuli-sensitive Pickering emulsions that can be switched between the state of emulsification and demulsification by changing the temperature. However, directly temperature-triggering the phase inversion of microgel-stabilized emulsions remains a great challenge. Here, a hybrid poly(N-isopropylacrylamide)-based microgel has now been successfully fabricated with tunable wettability from hydrophilicity to hydrophobicity in a controlled manner. Engineered microgels are synthesized from an inverse emulsion stabilized with hydrophobic silica nanoparticles, and the swelling-induced feature can make the resultant microgel behave like either hydrophilic or hydrophobic colloids. Remarkably, the phase inversion of such microgel-stabilized Pickering emulsions can be in situ regulated by temperature change. Moreover, the engineered microgels were capable of stabilizing water-in-oil Pickering emulsions and encapsulation of enzymes for interfacial bio-catalysis, as well as rapid cargo release triggered by phase inversion.

Hybrid poly(N-isopropylacrylamide)-based microgels are templated from inverse Pickering emulsions, and the tunable wettability renders as-prepared emulsions with reversible feature.     

淀粉/丙烯酸反相乳液体系的稳定性研究

以丙烯酸(AA)单体的水溶液为水相,液体石蜡为油相,失水山梨醇三油酸酯(Span 85)和辛基苯基聚氧乙烯醚(Opan 10)为复合乳化剂,合成了淀粉/丙烯酸反相乳液;考察了乳化剂亲水亲油平衡值(HLB值)、油水比、乳化剂用量、单体浓度、温度对乳液稳定性和类型的影响.结果表明,合成淀粉/丙烯酸稳定反相乳液体系的适宜条件...     

Properties of acrylic–polyurethane hybrid emulsions synthesized by the semibatch emulsion copolymerization of acrylates using different polyurethane particles

Aqueous acrylic–polyurethane hybrid emulsions were prepared by the semibatch emulsion copolymerization of methyl methacrylate and butyl acrylate in the presence of eight polyurethane dispersions. The polyurethane dispersions were synthesized with isophorone diisocyanate, 1000 and 2000 molecular weight polyester polyols, 1000 molecular weight polyether polyol, butanediol, and dimethylol propionic acid. Acrylic monomers were added in the monomer emulsion feed. We studied the effect of the use of different polyurethane seed particles and the effect of different weight ratios of methyl methacrylate to butyl acrylate on the emulsion properties, microphase structure, and mechanical properties of hybrid films. The average particle size and distribution were determined by photon correlation spectroscopy. The rheological properties of polyurethane dispersions and hybrid emulsions were tested under destructive conditions by an examination of flow curves and under nondestructive conditions of oscillatory shear in a range of linear viscoelastic responses. Differential scanning calorimetry was performed to characterize the thermal‐response properties of polymeric films. The relative average molecular weights were determined by gel permeation chromatography. The interactions between the acrylic and polyurethane components in hybrid particles and particle structure were studied with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Mechanical properties such as the Koenig hardness, tensile strength, elongation at break, and Young's modulus were measured. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4050–4069, 2005     

水性丙烯酸—聚氨酯微乳液的制备及粒子形态

水性聚氨酯作为一种环境友好材料近年来得到了迅速的发展，并以其优良的性能在皮革业、涂料、印刷、油墨等行业呈现广阔的应用前景［‘’‘j．通常采用IPN等技术制备出复合型水性树脂「‘，‘’，其中具有核壳结构的微乳液尤其受到重视．但研究多集中于微米级乳液的实际应用开发，对于纳米级、杂化型聚氨酯微乳液微观结构的研究却少见报道．本文通过在自乳化聚氨酯中自由基引发聚合丙烯酸类单体，制备出了具有核／壳结构的复合型丙烯酸一聚氨酯微乳液，并对微乳液的粒径、粒径分布、粒子形态及交联结构进行了研究．聚己内酯（220AL），日…     

Production and characterization of oil-in-water emulsions containing droplets stabilized by multilayer membranes consisting of beta-lactoglobulin, iota-carrageenan and gelatin

The influence of environmental conditions (pH, NaCl, CaCl2, and temperature) on the properties and stability of oil-in-water (O/W) emulsions containing oil droplets surrounded by one-, two-, or three-layer interfacial membranes has been investigated. Three oil-in-water emulsions were prepared with the same droplet concentration and buffer (5 wt % corn oil, 5 mM phosphate buffer, pH 6) but with different biopolymers: (i) primary emulsion: 0.5 wt % beta-Lg; (ii) secondary emulsion: 0.5 wt % beta-Lg, 0.1 wt % iota-carrageenan; (iii) tertiary emulsion: 0.5 wt % beta-Lg, 0.1 wt % iota-carrageenan, 0-2 wt % gelatin. The secondary and tertiary emulsions were prepared by electrostatic deposition of the charged biopolymers onto the surfaces of the oil droplets so as to form two- and three-layer interfacial membranes, respectively. The stability of the emulsions to pH (3-8), sodium chloride (0-500 mM), calcium chloride (0-12 mM), and thermal processing (30-90 degrees C) was determined. We found that multilayer emulsions had better stability to droplet aggregation than single-layer emulsions under certain environmental conditions and that one or more of the biopolymer layers could be made to desorb from the droplet surfaces in response to specific environmental changes (e.g., high salt or high temperature). These results suggest that the interfacial engineering technology used in this study could lead to the creation of food emulsions with improved stability to environmental stresses or to emulsions with triggered release characteristics.     

Stabilization of water/n‐hexane emulsions by amphiphilic copolymers based on vinyl ethers and their polycomplexes with poly(acrylic acid)

Amphiphilic random copolymers based on vinyl ether of ethylene glycol and vinyl butyl ether as well as their polycomplexes with poly(acrylic acid) were studied as polymeric reagents for the stabilization of water/n‐hexane emulsions. The emulsion stability strongly depended on the content of vinyl butyl ether in the copolymers as well as their concentration in solution. The more hydrophobic copolymers stabilized emulsions more efficiently. An increase in the temperature and the addition of inorganic salts reduced the emulsion lifetime. The formation of interpolymer complexes between the copolymers and poly(acrylic acid) significantly influenced the stability of the emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2625–2632, 2004     

Preparation of Thermally Regenerable Ion-Exchange Resins by Polymerizing a Heterogeneous Mixture of Monomers

Crossinked resin beads containing regions of acidic and basic groups are the preferred structures for the efficient operation of a thermally regenerable ion-exchange process. In the present study they were prepared by polymerizing a heterogeneous mixture of acrylic esters and allylamines. Polymerization of unstable emulsions of acrylic esters and allylamines by heating the stirred emulsions gave very hard, strong resins which after hydrolysis had good acid, amine and thermally regenerable capacities. The thermally regenerable capacity depended very much on the nature of the acrylic ester and the allylamine. The order of increasing thermally regenerable capacity for the resins prepared is methyl acrylate (MA)/triallylamine (TAA), MA/diallylamine (DAA), MA/methyldiallylamine (MDAA) < ethyl acrylate (EA)/TAA, EA/DAA < EA/MDAA, butyl acrylate/MDAA. The dispersion of the unstable emulsions in a third phase resulted in immediate breakdown of the emulsion. The dispersion of partly prepolymerized emulsions in a third phase of paraffin oil containing talc, followed by completion of the polymerization and hydrolysis, gave hard resin beads with acid, amine and thermally regenerable capacities comparable to those prepared as a two-phase emulsion. Their shape, size, strength, and degree of agglomeration depended on the stirring rate, the shape and material of construction of the stirrer, the potential acid/base ratio of the monomers, the nature of the solid dispersant, and the acrylic ester and the allylamine. Satisfactory resin beads could be obtained from only the MA/TAA and MA/DAA combinations which are those that give resins with the poorest thermally regenerable capacities. Partial prepolymerization of the two-phase emulsion is easy on the laboratory scale, but would be impracticable on the commercial scale. Although polymeric dispersants gave stable two-phase emulsions, the amine monomer migrated into an aqueous third phase more rapidly than it polymerized.     

Controllable preparation of monodisperse O/W and W/O emulsions in the same microfluidic device

This letter presents a simple way to prepare monodisperse O/W and W/O emulsions in the same T-junction microfluidic device just by changing the wetting properties of the microchannel wall with different surfactants. Highly uniform droplets ranging from 50 to 400 mum with a polydispersity index (sigma) value of less than 2% were successfully prepared. With the change in surfactants and surfactant concentrations, the interfacial tension and the wetting properties varied, and disordered or ordered two-phase flow patterns could be controllable. Monodisperse O/W and W/O emulsions were prepared under the action of a cross-flowing shear force or a perpendicular shear force by using an oil solution with 0.1-2.0 wt % Span 80 and an aqueous solution with 0.1-2.0 wt % Tween 20 as a continuous-phase flow, respectively. It gives a controllable method of preparing O/W and W/O emulsions in the same microfluidic device.     

Incorporation of titanium dioxide particles into polymer matrix using block copolymer micelles for fabrication of high refractive and transparent organic–inorganic hybrid materials

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles into poly(methyl methacrylate) (PMMA) to exploit high refractive and transparent organic–inorganic hybrid materials. Formation of TiO₂ particles of around 20 nm was conducted within hydrophilic core of block copolymer micelles of poly(methyl methacrylate‐block‐acrylic acid) (PMMA‐b‐PAA) in toluene via sol–gel process from titanium isopropoxide and hydrochloric acid. Subsequently, incorporation of TiO₂ particles into PMMA matrix was carried out by casting toluene solution of TiO₂ precursor‐loaded copolymer micelles, prepared from PMMA₃₅₀‐b‐PAA₉₃ and the precursor of mole ratio Ti⁴⁺/carboxyl 4.0, and PMMA. Hybrid films of TiO₂/PMMA exhibited high transparency to achieve transmission over 87% at 500 nm at 30 wt % of TiO₂ content. The refractive index of resulting hybrid films at 633 nm linearly increased with TiO₂ content to attain 1.579 at 30 wt % TiO₂, which was 0.1 higher than that of PMMA. Cross‐sectional transmission electron microscope images of TiO₂/PMMA hybrid films showed existence of TiO₂ clusters less than 100 nm, which were probably formed by aggregation or agglutination of TiO₂ particles during a drying process. It was also observed that decomposition temperature of the hybrid films elevated with increasing TiO₂ content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

双丙酮丙烯酰胺参与共聚的聚丙烯酸酯乳液的制备及其应用

肼;聚氨酯;乳液性质;交联;双丙酮丙烯酰胺参与共聚的聚丙烯酸酯乳液的制备及其应用     

Comparison of Pickering and network stabilization in water-in-oil emulsions

We compared the efficacy of Pickering crystals, a continuous phase crystal network, and a combination thereof against sedimentation and dispersed phase coalescence in water-in-oil (W/O) emulsions. Using 20 wt % water-in-canola oil emulsions as our model, glycerol monostearate (GMS) permitted Pickering-type stabilization, whereas simultaneous usage of hydrogenated canola oil (HCO) and glycerol monooleate (GMO) primarily led to network-stabilized emulsions. A minimum of 4 wt % GMS or 10 wt % HCO was required for long-term sedimentation stability. Although there were no significant differences between the two in mean droplet size with time, the free water content of the network-stabilized emulsions was higher than Pickering-stabilized emulsions, suggesting higher instability. Microscopy revealed the presence of crystal shells around the dispersed phase in the GMS-stabilized emulsions, whereas in the HCO-stabilized emulsion, spherulitic growth in the continuous phase and on the droplet surface occurred. The displacement energy (E(disp)) to detach crystals from the oil-water interface was ～10(4) kT, and was highest for GMS crystals. Thermal cycling to induce dispersed phase coalescence of the emulsions resulted in desorption of both GMS and GMO from the interface, which we ascribed to solute-solvent hydrogen bonding between the emulsifier molecules and the solvent oil, based on IR spectra. Overall, Pickering crystals were more effective than network crystals for emulsion stabilization. However, the thermal stability of all emulsions was hampered by the diffusion of the molten emulsifiers from the interface.     

Microstructure and properties of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)‐p‐phenylene diamine (PDA) polyimide/poly(vinylsilsesquioxane) hybrid nanocomposite films

Hybrid nanocomposite films of poly(vinylsilsesquioxane) (PVSSQ) and polyimide (PI) (PI/PVSSQ) were prepared via sol‐gel process from triethoxyvinylsilane (VSSQ) and thermal imidization from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)‐p‐phenylene diamine (PDA) polyamic acid (BPDA‐PDA PAA). We investigated the microstructure; interfacial interaction; and optical, thermal, dielectric, and mechanical properties of the hybrid films. The phase morphologies and degree of surface roughness were evaluated by scanning electron microscope (SEM) and atomic force microscope (AFM), respectively. It was found that the surface topography was influenced by the composition of PVSSQ. Hydrogen bonding interactions between polyimide (PI) matrix and PVSSQ domains were proved with FT‐IR spectroscopy. The transparency of the hybrid films was found to be dependent on the PVSSQ content. Incorporating of the PVSSQ in the hybrid composites increased the glass transition temperature of PI. Dielectric constants of the hybrid films were in the range of 2.37–3.59. Properties of the PI films were also significantly enhanced by adding 5–30 wt % of PVSSQ. For comparison, we also prepared the hybrid composites of PI and mixtures of VSSQ and tetraethoxysilane (TEOS) and the PI/silica hybrid composite containing 30 wt % of silica obtained from TEOS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5189–5199, 2004     

Effect of emulsifier type on droplet disruption in repeated shirasu porous glass membrane homogenization

The influence of various emulsifier types (anionic, nonionic, and zwitterionic) on the mean particle size, transmembrane flux, and membrane fouling in repeated membrane homogenization using a Shirasu porous glass (SPG) membrane has been investigated. Oil-in-water (O/W) emulsions (40 wt % corn oil stabilized by 0.06-2 wt % sodium dodecyl sulfate (SDS) or 0.1-2 wt % Tween 20 at pH 3 or 0.5-2 wt % beta-lactoglobulin (beta-Lg) at pH 7) were prepared by passing coarsely emulsified feed mixtures five times through the membrane with a mean pore size of 8.0 microm under the transmembrane pressure of 100 kPa. The flux increased as the number of passes increased, tending to a maximum limiting value. The maximum flux for the Tween 20-stabilized emulsions (5-47 m3.m(-2).h(-1)) was smaller than that for the SDS-stabilized emulsions (29-60 m3.m(-2).h(-1)) because less energy was needed for the disruption of a SDS-stabilized droplet due to the lower interfacial tension. The mean particle size after five passes was 4.1-6.8 and 6.4-8.7 mum for 0.1-2 wt % SDS and Tween 20, respectively. The flux in the presence of beta-Lg was much smaller than that in the presence of SDS and Tween 20, which was a consequence of more pronounced membrane fouling, due to the protein adsorption to the membrane surface. After five passes through the membrane, the fouling resistance in the presence of 2 wt % beta-Lg (1.1 x 10(10) 1/m) was 2 orders of magnitude higher than that for 0.5 wt % Tween 20 and an order of magnitude higher than the membrane resistance. If a clean membrane was used in the fifth pass, a 2-fold reduction of the fouling resistance was observed.     

Formulation of the Polysaccharide FucoPol into Novel Emulsified Creams with Improved Physicochemical Properties

Driven by the customers’ growing awareness of environmental issues, the production of topical formulations based on sustainable ingredients is receiving widespread attention from researchers and the industry. Although numerous sustainable ingredients (natural, organic, or green chemistry-derived compounds) have been investigated, there is a lack of comparative studies between conventional ingredients and sustainable alternatives. In this study, olive oil (30 wt.%) and α-tocopherol (2.5 wt.%) containing oil-in-water (O/W) emulsions stabilized with the bacterial fucose-rich polysaccharide FucoPol were formulated envisaging their validation as cosmetic creams. After formula composition design by Response Surface Methodology (RSM), the optimized FucoPol-based emulsion was prepared with 1.5 wt.% FucoPol, 1.5 wt.% cetyl alcohol, and 3.0 wt.% glycerin. The resulting emulsions had an apparent viscosity of 8.72 Pa.s (measured at a shear rate 2.3 s⁻¹) and droplet size and zeta potential values of 6.12 µm and −97.9 mV, respectively, which are within the values reported for cosmetic emulsified formulations. The optimized formulation displayed the desired criterium of a thin emulsion system, possessing the physicochemical properties and the stability comparable to those of commercially available products used in cosmeceutical applications.     

Self‐assembled polyurea macromer nanodispersion and resulting hybrid polyurea‐acrylic emulsions and films

A polyurea macromer (PUM) was synthesized and dispersed in basic conditions to form self‐assembled nanoparticles (<20 nm dispersions, up to 30 wt % aq. soln.). These nanoparticles enabled surfactant‐free emulsion polymerization to form hybrid polyurea‐acrylic particles despite the absence of a measureable water‐soluble fraction. The T_g of the starting PUM material was a strong function of the PUM's extent of neutralization and hydration (varying between 100 °C and >175 °C) due to changes in hydrogen and ionic bonding. Two separate hybrid polyurea‐acrylic emulsion systems were prepared: one by direct polymerization of (meth)acrylic monomers in the presence of the nanodispersion and a second by a physical blend of PUM nanodispersion with an acrylic latex control. The direct polymerization method resulted in a hybrid emulsion particle size that developed by a mechanism resembling conventional emulsion polymerization and was unlike that described for seeded polyurethane dispersion systems. Film hardness was shown to increase with increasing coating thickness for the hybrid film prepared by direct polymerization. The resulting mechanical properties could be explained by applying mechanical models for a composite foam structure. These results were unprecedented for normal elastomer films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1373–1388     

Effect of annealing on the supercapacitor performance of CuO-PAA/CNT films

We report the synthesis of CuO-poly(acrylic) acid/CNT hybrid thin films by a cost-effective spin-coating technique for supercapacitor application. Hybrid films were annealed at 300, 400, and 500 °C to study its effect on the supercapacitor behavior. X-ray photoelectron spectroscopy and Fourier transform-infrared spectroscopy techniques were used for the phase identification and determination of the organic component in the hybrid films, respectively. Surface morphology of the films was examined by scanning electron microscopy and revealed the novel ring-like structures. The average diameter of the ring changes from 0.5 to 1.2 μm with increase in annealing temperature. Cyclic voltammetry is employed to estimate the specific capacitance (C _sp) of the films in 1 M H₂SO₄ electrolyte. It is observed that the C _sp increases from 188 to 258 Fg⁻¹ with increase in annealing temperature.     

Hydrophobin coated boehmite nanoparticles stabilizing oil in water emulsions

Hydrophobin coated boehmite nanoparticles have been used to establish tooth-paste like, homogenous emulsions. The surface-modified nanoparticles were simply obtained by mixing aqueous solutions of cationic boehmite particles with the anionic hydrophobin H Star Protein B® (HPB). Surface tension measurements clearly show that 1 wt.% boehmite binds up to 1 wt.% HPB. The strong interaction and aggregation of hydrophobin coated boehmite nanoparticles was proven by Cryo-TEM measurements, too. Interestingly, the combined use of 0.5 wt.% HPB and 0.5 wt.% boehmite as emulsifying agents resulted in very stable, homogenous, high internal phase emulsions (65 wt.% oil) that are stable over months. The established emulsions have also been characterized by rheological measurements. Storage moduli of more than 1000 Pa are characteristic for their high gel-like properties. Furthermore, light microscopy showed an average droplet size close to 1 μm with low polydispersity. Cryo-SEM confirmed that the hydrophobin coated nanoparticles are located at the interface of the oil droplets and therefore stabilize the emulsion systems.     

Preparation of polyimide/silica hybrid material by sol–gel process under basic catalysis: Comparison with acid conditions

Hybrid polyimide/silica materials were prepared from polyimides bearing reactive functions along the polymer backbone, which can react with. The silica phase was formed by sol–gel process using ammonium hydroxide catalyst. Silica fillers prepared under basic conditions were compared with materials prepared using chlorhydric acid. The synthesized hybrid materials were characterized by TGA, IRTF, and NMR. The density of the different systems was also measured. The morphology of these hybrid systems were investigated by both scanning and transmission electron microscope. Thermal properties of the composites were also evaluated by DSC and DMA. The morphology of silica fillers highly depends on the catalyst, on the reaction conditions of the sol–gel process, and the linking formation with the polyimide. It results that optimized conditions lead to homogeneous hybrid films containing 12 wt % of silica particles of about 20 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1891–1902, 2008