固相微萃取-毛细管气相色谱法测定污染棕榈油中的低浓度二甲苯

采用一种新型的样品制备技术－固相微萃取代替传统的顶空进样技术,结合毛细管气相色谱,快速,灵敏地检测出污染进口棕榈油的低浓度的二甲苯。以苯为内标,以大豆油模拟基质制作标准曲线。在０．２￣２０ｍｇ／ｋｇ浓度范围内呈线性,对样品和标样萃取的精度良好。     

Thermal and Structural Behavior of Palm Oil. Influence of Cooling Rate on Fat Crystallization

Summary: The effects of scanning rates (q = −0.5 °C/min to −50 °C/min) on the formation of the different phases occurring at low temperature of a palm oil are investigated by means of calorimetry and optical analysis. It is demonstrated that the cooling rates changed the polymorphism of triacylglycerols (TAGs). The centrifugation is used to separate the two fractions (olein and stearin) of palm oil. We show whereas the rate of centrifugation the separation is not effective. We obtained two fractions, a liquid fraction and a solid fraction which contains some liquid TAGs. It is observed that the solid fraction of palm oil is more sensitive to the effects of the cooling rates. By changing the cooling rate q, it appears threshold behaviour for q = −3 °C/min dividing the data discussion in two parts: for slow cooling rate and for fast cooling rate. At slow cooling rates, TAGs had more time to interact. Contrary at fast cooling rate, TAGs have not the time to be reorganised in more stable conformation. Micrographs revealed that the types of crystals observed were spherolites but some variations in crystal size appeared with the variation of cooling rate.     

Phase Diagram,Electrical Conductivity,and Viscosity Study of Alpha-Sulfonated Methyl Esters Derived from Palm Stearin/1-Pentanol/Hydrocarbon/Water Systems

Microemulsion region of sodium salt alpha-sulfonated methyl ester derived from palm stearin (α-SMEPS)/1-pentanol/alkane/water systems was constructed and investigated at 30.0 ± 0.1°C. The water-in-oil (w/o) microemulsion, bicontinuous structure, and oil-in-water (o/w) microemulsion regions were determined by both conductivity and viscosity methods. Results showed that the microemulsion region decreases and moved towards (α-SMEPS f 1-pentanol) rich corner with the increase in hydrocarbon chain length of alkane from C8 to C16. The changes in alkane chain length from C16 to C8 were found to have shifted the o/w microemulsion f bicontinuous structure f w/o microemulsion transitions of α-SMEPS self-assembly to the rich water corner.     

Fabrication of Alginate-Based O/W Nanoemulsions for Transdermal Drug Delivery of Lidocaine: Influence of the Oil Phase and Surfactant

Transdermal drug delivery of lidocaine is a good choice for local anesthetic delivery. Microemulsions have shown great effectiveness for the transdermal transport of lidocaine. Oil-in-water nanoemulsions are particularly suitable for encapsulation of lipophilic molecules because of their ability to form stable and transparent delivery systems with good skin permeation. However, fabrication of nanoemulsions containing lidocaine to provide an extended local anesthetic effect is challenging. Hence, the aim of this study was to address this issue by employing alginate-based o/w nanocarriers using nanoemulsion template that is prepared by combined approaches of ultrasound and phase inversion temperature (PIT). In this study, the influence of system composition such as oil type, oil and surfactant concentration on the particle size, in vitro release and skin permeation of lidocaine nanoemulsions was investigated. Structural characterization of lidocaine nanoemulsions as a function of water dilution was done using DSC. Nanoemulsions with small droplet diameters (d < 150 nm) were obtained as demonstrated by dynamic light scattering (DLS) and cryo-TEM. These nanoemulsions were also able to release 90% of their content within 24-h through PDMS and pig skin and able to the drug release over a 48-h. This extended-release profile is highly favorable in transdermal drug delivery and shows the great potential of this nanoemulsion as delivery system.     

高效原油破乳剂GE-189的制备与应用研究

以分子量大、活泼氢多、具有分支结构的瓜胶作起始剂，与环氧乙烷、环氧丙烷加成，首次合成出具有分支结构的瓜胶类原油破乳剂GE－189，并把这种破乳剂及其与常规破乳剂F3111的复配体系应用于不同油田原油乳状液的室内破乳脱水试验。结果表明，破乳剂复配体系在脱水速率、脱水效果等方面均优于各现场剂，把这种破乳剂与生物表面活性剂复配，于巴西海上油田原油乳状液的破乳脱水，能够显著提高原油乳状液的破乳脱水速率和脱水体积，两者之间表现出明显的协同作用。     

液相萃取/离子色谱法测定车用汽柴油中5种无机阴离子

建立了抑制型电导离子色谱法同时分离检测车用汽柴油中F~-,Cl~-,Br~-,NO_3~-,SO_4~(2-)5种无机阴离子含量的分析方法。样品用90%甲醇水溶液超声振荡提取,经离心分层,水相用0.22μm混合纤维微孔滤膜过滤,以15 mmol/L的KOH为淋洗液,外标法定量。结果显示,5种阴离子在0.50~20.00 mg/L浓度范围内呈良好的线性关系,相关系数均不低于0.999,方法检出限(LOD)为0.01~0.04 mg/kg。在低、中、高3个加标水平下,汽油中各离子的平均加标回收率为87.6%~109.7%,相对标准偏差(RSD)为0.4%~3.5%;柴油中各离子的平均加标回收率为86.8%~110.0%,RSD为0.1%~2.9%。该方法前处理简便,灵敏度高,重复性和再现性好,适用于车用汽柴油中常见无机阴离子含量的测定。     

顶空低温液相微萃取技术分析水中杂醇油和啤酒挥发性成分

顶空液相微萃取(HS-LPME)存在溶剂稳定性不高,只能采用沸点较高的溶剂,容易干扰样品组分测定等缺点.顶空低温液相微萃取装置(HS-CLPME)以带有台阶形圆柱腔体的聚四氟乙烯小帽为萃取剂的载体,利用半导体制冷技术(TEC)将萃取剂冷却至最低-20℃,采用挥发性溶剂进行顶空液相微萃取(HS-CLPME),扩展了HS-...     

Fabrication of Ti2SnC-MAX Phase Blended PES Membranes with Improved Hydrophilicity and Antifouling Properties for Oil/Water Separation

In this research work, the Ti₂SnC MAX phase (MP) was synthesized via the reactive sintering procedure. The layered and crystalline structure of this MP was verified by SEM, HRTEM, and XRD analyses. This nano-additive was used for improvement of different features of the polyethersulfone (PES) polymeric membranes. The blended membranes containing diverse quantities of the MP (0–1 wt%) were fabricated by a non-solvent-induced phase inversion method. The asymmetric structure of the membranes with small holes in the top layer and coarse finger-like holes and macro-voids in the sublayer was observed by applying SEM analysis. The improvement of the membrane’s hydrophilicity was verified via reducing the contact angle of the membranes from 63.38° to 49.77° (for bare and optimum membranes, respectively). Additionally, in the presence of 0.5 wt% MP, the pure water flux increased from 286 h to 355 L/m² h. The average roughness of this membrane increased in comparison with the bare membrane, which shows the increase in the filtration-available area. The high separation efficiency of the oil/water emulsion (80%) with an improved flux recovery ratio of 65% was illustrated by the optimum blended membrane.     

UHPLC-UV/PDA Method Validation for Simultaneous Quantification of Luteolin and Apigenin Derivatives from Elaeis guineensis Leaf Extracts: An Application for Antioxidant Herbal Preparation

Luteolin and apigenin derivatives present in oil palm (Elaeis guineensis) leaves (OPL) are reported to possess excellent antioxidant properties relating to numerous health benefits. To meet the global demand for flavonoids, OPL, which is plentifully generated as an agricultural by-product from oil palm plantations, can be further exploited as a new source of natural antioxidant compounds. However, to produce a standardized herbal preparation, validation of the quantification method for these compounds is required. Therefore, in this investigation, we developed and validated an improved and rapid analytical method, ultra-high-performance liquid chromatography equipped with ultraviolet/photodiode array (UHPLC-UV/PDA) for the quantification of 12 luteolin and apigenin derivatives, particularly focusing on flavonoid isomeric pairs: orientin/isoorientin and vitexin/isovitexin, present in various OPL extracts. Several validation parameters were assessed, resulting in the UHPLC-UV/PDA technique offering good specificity, linearity, accuracy, precision, and robustness, where the values were within acceptable limits. Subsequently, the validated method was employed to quantify luteolin and apigenin derivatives from OPL subjected to different drying treatments and extraction with various solvent systems, giving total luteolin (TLC) and apigenin content (TAC) in the range of 2.04–56.30 and 1.84–160.38 µg/mg extract, respectively. Additionally, partial least square (PLS) analysis disclosed the combination of freeze dry-aqueous methanol yielded OPL extracts with high TLC and TAC, which are strongly correlated with antioxidant activity. Therefore, we provide the first validation report of the UHPLC-UV/PDA method for quantification of luteolin and apigenin derivatives present in various OPL extracts, suggesting that this approach could be employed in standardized herbal preparations by adopting orientin, isoorientin, vitexin, and isovitexin as chemical markers.     

杂环化聚丙烯亚胺树状聚合物负载钌铑双金属纳米粒子的制备及在催化丁腈橡胶氢化中的应用

以十五元三烯氮杂大环改性的不同代数聚丙烯亚胺树状聚合物(Gn-M,n=2,3,4)为模板,通过共络合-还原方法制备了一系列钌/铑双金属纳米粒子[Gn-M(RuxRh100-x)DTNs,x为Ru摩尔分数],并将其应用于丁腈橡胶(NMR)的催化氢化.用紫外-可见光谱(UV-Vis)、X射线衍射分析(XRD)及X射线能谱(EDS)表征DTNs的金属组成和结构,结果表明,DTNs上的双金属离子被还原成金属单质并负载于Gn-M上;粒度分析结果表明,G2-M(Ru50Rh50),G3-M(Ru50Rh50)和G4-M(Ru50Rh50)DTNs的平均粒径分别为7.5,8.1和4.5 nm.凝胶测试及核磁共振波谱(1H NMR)结果表明,Ru/Rh DTNs催化剂对丁腈橡胶的催化氢化反应具有良好的选择性.当以G4-M(Ru30Rh70)DTNs为催化剂时,NBR的氢化度最高可达99.51%,循环使用2次后,丁腈橡胶的氢化度仍可达到90.58%.