Elucidation of stabilizing pickering emulsion with jackfruit filum pectin-soy protein nanoparticles obtained by photocatalysis

There is still the dearth of reports of jackfruit filum pectin-based nanoparticles as the Pickering emulsifiers with respect to the applications in foods, cosmetics and medicines. So we fabricated soy protein-jackfruit filum pectin nanoparticles (SPP) by photocatalysis as Pickering emulsifier. Jackfruit filum pectin exhibited lower yield (17.31%), degree of methoxylation (15.53%), but higher galacuronic acid content (74.22%). A strong linkage between pectin and soy protein was formed by photocatalysis. The conjugated polymer could self-assemble into compact near globular nanoparticle. The mean size of SPP was larger than that of soy protein nanoparticles but smaller than that of soy protein-pectin complex without photocatalysis. Besides, the zeta potential of SPP was ?33.8?mV, significantly lower than that of soy protein nanoparticles but higher than that of control sample, further confirming that SPP surfaces were completely covered with pectin molecules. Compared with control sample, the three-phase contact angle increased from 42.7 to 90.6°, indicated that SPP could be developed as effective Pickering emulsifiers. The emulsions stabilized by SPP exhibited high thermal stability and excellent salt tolerance as well as good freeze-thaw stability in comparison with emulsions covered with control sample. These findings would provide a potential way of producing effective Pickering emulsifier.GRAPHICAL ABSTRACT     

Oil-in-gold nanoparticle solution emulsion stabilized with amphiphilic polymers and its stability under NIR irradiation

Oil-in-water emulsions were prepared by emulsifying mineral oil in gold nanoparticle (GNP) solution using amphiphilic polymers as an emulsifier. Poly(2-hydroxyethyl acrylate) (PHEA) and poly(2-hydroxyethyl acrylate-co-propyl methacryate) (P(HEA/PMA)) having different PMA contents (2.98%, 3.29%, 6.1%, and 8.59% (mole/mole)) were prepared by a free radical polymerization, confirmed by ¹H NMR spectroscopy. According to the optical density change of the polymer solution (2% (w/v)) at 20°C–80°C, only P(HEA/PMA) having a PMA content of 3.29 mole % showed its lower solution critical temperature around 31°C. The air/water interfacial activity of the amphiphilic polymers was higher as the PMA content was higher. GNP was prepared by reducing gold ions in water. The mean hydrodynamic diameter was 22.2?nm and it appeared sphere-like on TEM photo. The emulsion prepared using PHEA maintained its stability above 80% for 190 hours, whereas it was destabilized rapidly upon 60 minutes of near-infrared (NIR) irradiation and its stability decreased to below 20% in 20 hours. As the PMA content was higher, the stability of the emulsions prepared using P(HEA/PMA) became lower and NIR irradiation accelerated the destabilization more effectively.     

Preparation of novel suspensions of ZnO/living block copolymer latex nanoparticles via pickering emulsion polymerization and their long term stability

In this work, we present the first Pickering emulsion polymerization with a controlled/living character. Pickering emulsion polymerization in the presence of a novel suspension of zinc oxide/poly(sodium 4‐styrenesulfonate) (ZnO/PSS^?) nanocomposite particles was applied to prepare ZnO/living block copolymer latexes. In the emulsion system, 1,1‐diphenylethene (DPE)‐controlled radical polymerization of poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) was proceeded in oil phase. The nanocomposite particles of ZnO/PSS^? with an average diameter of 20 nm and negatively charged zeta potential around ?30 mV were synthesized via hydrothermal method then served as an effective emulsion stabilizer at the oil/water interface. Living polymerization was carried out using DPE‐capped PMMA as the macroinitiator and PMMA‐b‐PBA block copolymer latex was successfully prepared with coverage of ZnO/PSS^? nanoparticles. Narrow size distributions of the droplets as well as latex particles were obtained, and the livingness of block copolymers was comparable to that of emulsions stabilized by conventional surfactants. The controlled/living character in Pickering emulsion polymerization was slightly influenced by the amount of PSS^? immobilized into the ZnO/PSS^? nanoparticles, whereas it was significantly influenced by the weight ratios between ZnO/PSS^? and oil phase. The Pickering latexes showed excellent long term stability against either coalescence or sedimentation over several months. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The interaction of sodium caseinate with monoglyceride and diglyceride at the oil-water interface in corn oil-in-water emulsions and its effect on emulsion stability

The slow rate of drop coalescence at 5 C in concentrated corn oil-in-water emulsions stabilised with sodium caseinate, glyceryl monostearate and glyceryl distearate was deduced from changes in the drop size distribution. Both pH and the monoglyceride/diglyceride ratio influenced coalescence. At any pH minimum coalescence was observed at a 5/2 monoglyceride/diglyceride ratio. This was attributed to association of caseinate with a previously formed complex of monoglyceride and diglyceride, so supporting an interpretation previously proposed on the basis of rheological data for the emulsions and for films of caseinate-glycerides at the oil-water interface.     

Synthesis and characterization of a novel fluorine-containing polymer emulsion with core/shell structure

A novel fluorine-containing polymer emulsion 4 with core/shell structure was synthesized in water phase by a two-stage emulsion polymerization technique using monomer 3 (i.e., 2-methacryloyloxyethyl perfluorooctanoate (MAEF)) reacting with the monomers such as butyl acrylate (BA), acrylic acid (AA) and styrene (ST). The monomer 3 was synthesized from the intermediate 2 (pentadecafluoro-octanoyl chloride) reacting with β-hydroxyethyl methacrylate (HEMA). Polymer film were prepared by coating emulsion 4 directly on a cleaned glass plate and allowed to dry at room temperature. Moreover, the characteristics of polymer film such as hydrophobicity, chemical resistance, surface composition, thermal stability, emulsion particle morphology, as well as the film-forming property were also studied.     

Tetraarylphosphonium perfluorocyclobutyl polyelectrolyte with low critical surface energy,high thermal stability,and high alkaline resistance

Two tetraarylphosphonium polyelectrolytes having perfluorocyclobutyl units in their backbones have been prepared in which the counteranion is either bromide ( PFP· Br) or bis(trifluoromethyl)sulfonimide ( PFP· NTf₂). These polymers exhibit high thermal stability as assessed by thermogravimetric analysis, with a decomposition temperature of 460 °C for PFP· NTf₂. Even after heating at 300 °C for 72 h, PFP· NTf₂ shows no signs of degradation detectable by nuclear magnetic resonance spectrometry. As is typical for many tetraarylphosphonium species, films of these polymers can be quite resistant to degradation by alkaline solution. Upon alkaline challenge by exposure to 6 M NaOH at 65 °C for 24 h, for example, only 16% of the phosphonium centers in PFP ·NTf₂ are degraded, making PFP ·NTf₂ one of the most alkaline‐stable phosphonium polymers to date. Despite having ionic backbones, PFP· Br and PFP· NTf₂ exhibit very low critical surface energies of 26.1 and 22.9 mJ m^?1, respectively. These values are on par with the values for poly(vinylene fluoride) and dimethylsiloxane. Such low surface energy polycations capable of high alkaline stability may find application as components of alkaline fuel cell membranes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2267–2272     

Intrinsic thermal stability and quenching recovery of thin-film superconductors with thermal boundary resistance

The stability behaviour of a thin-film superconductor under a localized release of thermal disturbance is investigated. Two-dimensional conjugate film/substrate conduction equation with anisotropic thermal conductivity of the film, and Joule heat are employed to investigate effects of substrate and thermal properties on the intrinsic stability and quenching recovery. To consider the thermal boundary resistance between film and substrate, an interfacial-layer model (ILM) with very low diffusivity and an acoustic mismatch model (AMM) are employed. Results show that the thermal boundary resistance influences strongly the intrinsic stability. Thermal boundary resistance increases intrinsic stability if the thermal conductivity of the substrate or the disturbance energy is large. Higher Biot numbers and thermal conductivity ratios of film to substrate in longitudinal direction influence stability favorably. We demonstrate also that operation of a film/substrate system, such as YBCO/MgO, is either intrinsically stable or irrecoverably unstable.The authors wish to express their sincere appreciation to Dr. R. C. Chen for his invaluable advice and suggestions during the course of this paper. This research was supported by the National Science Council of the R. O. C. through grant NSC 83-0401-E-009-006. The computations were performed on the IBM ES/9000 at the National Center For High-Performance Computing.     

The effects of emulsifier type,phase ratio,and homogenization methods on stability of the double emulsion

The double emulsion technology has a potential effect on the development of diversity and quality of functional foods by means of decreasing oil or salt concentration, encapsulating and controlling release of valuable components. In this study, it was aimed to formulate stable double emulsions to be used in food systems. W1/O ratios of primary emulsions, stabilized by polyglycerol polyricinoleate (PGPR), were designed as 2:8 and 4:6, and (W1/O)/W2 ratios of the double emulsions were used as 2:8 and 4:6. W/O/W phase ratios, homogenization methods applied to primary emulsion (high-speed homogenization, ultrasonic homogenization), and emulsifier types used in W2 phase [sodium caseinate (SC), xanthan gum, lecithin-whey protein concentrate] were used as independent variables. Particle size and distributions, stability, encapsulation efficiency (EE), rheological properties, long-term stability, and morphological properties of the double emulsions were investigated.

The double emulsions prepared with SC and (W1/O)/W2 ratio of 4:6, were found to have the higher stability values, higher apparent viscosity, and lower particle size. High-speed homogenization applied to primary emulsion reduced particle size of the double emulsion and increased apparent viscosity, but did not affect stability and EE of the double emulsions, significantly.     

Hydrothermal synthesis,structure,fluorescence property of a novel 3D metal-organic framework with high thermal stability

A novel 3D metal-organic framework(MOF) with remarkable thermal stability,Ni(BIC)2.2·5H2O(JUC-86)(HBIC = 1-H-benzimidazole-5-carboxylic acid and JUC = Jilin University China),has been synthesized under hydrothermal conditions.It crystallizes in tetragonal symmetry with P43212 space group.The 3D structure consists of channels assembled from triple helices with a 4.5 × 4.52 aperture,which are formed by the parallel alignment of three infinite helical chains.The thermogravimetric analysis(TGA) and powder X-ra...     

Preparation and thermal properties of a novel core‐shell structure flame‐retardant copolymer

In order to improve the flame retardancy of polystyrene (PS), a phosphorus and nitrogen comonomer, named AC₂NP₂, was synthesized and then incorporated into various amounts of PS by seeded emulsion polymerization. The modified methacrylate (AC₂NP₂) was used as the core phase, the styrene as the shell phase, then flame‐retardant effect copolymers with core‐shell structure were prepared successfully. The particle size was ranged from 40 to 60 nm, and the structure and properties of the copolymers were characterized in detail. Notably, despite a few amounts of the AC₂NP₂ units in the copolymers, all the copolymers exhibited significantly enhanced thermal stability and reduced flammability as compared with pure PS. Furthermore, from differential scanning calorimetry test, it was observed that the glass transition temperature was tinily influenced with the incorporation of commoner. The incorporation of P‐N comonomer into PS backbone did not lead to negative effect on the glass transition behavior of PS.     

Effect of the modification of silica on thermal properties and flammability of cross-linked butadiene-acrylonitrile rubbers

The paper presents the results of testing the thermal stability and flammability of butadiene-acrylonitrile rubber vulcanizates with different contents of combined acrylonitrile: Perbunan NT 1845 and Perbunan NT 3945 from Bayer, containing unmodified and bromine- or iodine-modified silica. The test results were obtained with the use of a derivatograph, measurements of flammability by the method of oxygen index, in air and also with the use of a cone calorimeter. The effect of the modification on the zeta potential was also examined. A considerable reduction in the flammability of nitrile rubber vulcanizates filled with silica can be obtained by the modification of filler with bromine or iodine. All the vulcanizates containing modified silica are self-extinguishing. An appropriate filling of NBR 39 vulcanizates with bromine-modified silica makes it possible to obtain non-flammable polymeric materials. They neither ignite nor glow under the action of a flame source for 30 s. The findings can be a rational basis for the synthesis of modified silica that can act as active filler and effective flame-retardant agent at the same time.     

Effects of incorporation of modified silica nanoparticles on the mechanical and thermal properties of PMMA

Silica nanoparticles of various sizes have been incorporated by melt compounding in a poly(methyl methacrylate) (PMMA) matrix to enhance its thermal and mechanical properties. In order to improve nanoparticles dispersion, PMMA grafted particles have been prepared by atom transfer radical polymerization (ATRP) from well-defined silica nanoparticles. This strategy was expected to ensure compatibility between both components of the PMMA nanocomposites. TEM analysis have been performed to evaluate the nanosilica dispersion whereas modified and non-modified silica/PMMA nanocomposites thermal stability and mechanical properties have been investigated by both thermogravimetric and dynamical mechanical analysis.     

Spectral,thermal, and electrical properties of poly(o- and m-toluidine)-polystyrene blends prepared by emulsion pathway

Conducting poly(o-toluidine) (POT) and poly(m-toluidine) (PMT) blends containing 10, 30, 50, 70, and 90 % wt/wt of polystyrene (PSt) were prepared by employing a two-step emulsion pathway. The bands characteristic of both polystyrene and POT/PMT are present in the IR spectra of POT–PSt and PMT–PSt blends. The UV-visible spectra of POT–PSt and PMT–PSt blends exhibit two bands around 313 and 610 nm, confirming that some amount of POT/PMT base is present in the blends. The EPR parameters such as line width and spin concentration reveal the presence of POT/PMT salt in the respective blends. The TGA, DTA, and DSC results suggest a higher thermal stability for the POT and PMT blends than that for the respective salts. The conductivity values of POT(70)–PSt(30) and POT(90)–PSt(10) blends are almost the same (1.1 × 10⁻² and 1.3 × 10⁻² S cm⁻¹, respectively) and these values are very close to that of pure POT salt, suggesting that POT can be blended with up to 30% wt/wt of PSt to improve its mechanical properties without a significant drop in its conductivity. The conductivity values of PMT–PSt blends are lower than those of the corresponding POT–PSt blends by two to three orders of magnitude, indicating that POT is a better system than PMT to prepare blends by this method. The dielectric constant and tan δ values of the blends increase with the amount POT/PMT and are greater than that of polystyrene. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2291–2299, 1998     

Synthesis and characterization of novel optically active poly(ester‐imide)s with high Tg and good thermal stability

A series of novel optically active poly(ester‐imide)s (ter‐PEIs) with high glass transition temperature (T_g), good thermal stability, and solubility were successfully designed and synthesized by direct polycondensation reactions, using p‐hydroxybenzoic acid (PHB), 4,4’‐dihydroxybenzophenone, and a chiral diacid, N,N'‐(pyromellitoyl)‐bis‐L‐phenylalanine diacid as monomers. The resulting terpolymers were characterized by¹H‐NMR, FTIR, element analysis, thermogravimetric analysis, different scanning calorimeter and wide‐angle x‐ray diffraction, etc. The ter‐PEIs are amorphous polymers with good heat resistance and high T_gs. They are soluble in many common polar organic solvents and show optically rotation property. The specific rotation values of the ter‐PEIs increase with the molar ratio of the chiral diacid, and the rigid PHB monomer is beneficial to increase the T_gs of the polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

高温热稳定性Au/β-Mo2C催化剂的制备及在逆水煤气变换反应中的应用

以程序升温碳化法合成β-Mo2C载体,采用原位沉淀法制备负载量不同的Au/β-M o2C催化剂,利用XRD、STEM和氮气吸附-脱附等手段对Au在载体表面的分散性、微观形貌及孔结构等进行表征,并在逆水煤气变换(RWGS)反应中对其高温热稳定性进行了研究。XRD表征结果表明,在34. 44°、38. 02°、39. 44°、52. 12°、61. 53°、69. 62°和74. 65°处出现了β-Mo2C对应的(100)、(002)、(101)、(102)、(110)、(103)和(200)晶面的X射线特征衍射峰;同时,未出现Au物种的特征吸收峰,说明Au负载量较低的0. 1%和0. 5%的催化剂上Au纳米粒子的分散性较好。STEM表征结果也显示,当负载量较低(0. 5%、1. 0%和2. 0%)时,金纳米粒子以2 nm左右的原子簇形式均匀分散并锚定在β-M o2C载体上。氮气吸附-脱附表征结果表明,催化剂具有良好的介孔结构。反应评价结果表明,0. 2%Au/β-Mo_2C催化剂在RWGS反应中具有较好的催化活性和较高的CO选择性,且反应后孔结构良好,Au纳米粒子仍然均匀分散,说明Au/β-Mo_2C催化剂在此反应中具有较高的催化性能和高温热稳定性。     

The thermal stability of triprolidine hydrochloride and its mixtures with cyclodextrin and glucose

Triprolidine hydrochloride (C₁₉H₂₂N₂·HCl·H₂O) (TPH) is a well-known antihistamine drug which is reported as being photosensitive. The thermal stabilities of TPH and of 1:1 molar and 1:1 mass ratio physical mixtures of TPH with β-cyclodextrin (BCD) and with glucose have been examined using DSC, TG and TG-FTIR, complemented by X-ray powder diffraction (XRD) and infrared spectroscopic (IR) studies. Thermal studies of the solid TPH/BCD mixtures indicated that interaction between the components occurs and it is possible that the TPH molecule may be least partially accommodated in the cavity of the BCD host molecule. XRD results support this indication of inclusion. The results of molecular modelling suggest that TPH is most likely to be accommodated in the BCD cavity as a neutral triprolidine molecule with the toluene portion of the molecule preferentially included in the cavity. The results obtained illustrate the general stability of TPH. The study has also shown TPH to be compatible with both glucose and BCD, which are potential excipients both in solid and liquid dosage forms. The presence of these excipients in dosage forms will thus not adversely affect the stability and the therapeutic efficacy of TPH. This revised version was published online in July 2006 with corrections to the Cover Date.     

Annurca peel extract: from the chemical composition,through the functional activity,to the formulation and characterisation of a topical oil-in-water emulsion

The aim of this study was to produce a hydro-alcoholic safe antioxidant Malus pumila Miller cv Annurca peel extract (APE) useful as functional ingredient in an oil-in-water emulsion. Results showed that APE contains a hydroxycinnamic acid (chlorogenic acid), flavonol glycosides (quercetin derivatives) and a dihydrochalcone, phloridzin (phloretin-2-O-glucoside). The isoquercitrin (quercetin-3-O-glucoside) content was quantified in 0.3% w/w of extract. APE showed a significant and concentration-dependent free-radical scavenging activity correlated to its polyphenols content. No cytotoxic effect was observed in primary human epidermal keratinocyte adults and dermal fibroblast cell lines. The formulative approach led to produce a stable emulsion able to load a high amount of APE, up to 6.0% w/w. The homogenous distribution of APE in the emulsion was clearly demonstrated by fluorescence microscopy analysis. The emulsion resulted able to enhance the in vitro release rate of APE through synthetic membranes with respect to the raw material.     

Eco-friendly synthesis of high silica zeolite Y with choline as green and innocent structure-directing agent

Zeolite synthesis in contemporary chemical industries is predominantly conducted using organic structure-directing agents (OSDAs), which are chronically hazardous to humans and the environment. It is a growing trend to develop an eco-friendly and nuisanceless OSDA for zeolite synthesis. Herein, choline is employed as a non-toxic and green OSDA to synthesize high silica Y zeolite with SiO₂/Al₂O₃ ratios of 6.5–6.8. The prepared Y zeolite samples exhibited outstanding (hydro)thermal stability at ultrahigh temperature owing to the higher SiO₂/Al₂O₃ ratio. The XRF, SEM, ²⁹Si-NMR and ¹³Na+ results suggested that choline plays a structure-directing role in the synthesis of Y zeolite, while the feed molar fraction of Na⁺ is a crucial determinant for the framework SiO₂/Al₂O₃ ratio and the crystal morphology.