Preparation and Properties of the Emulsions of the Polysiloxane Material Modified with Tertiary Amino Side Chain

A series of the polysiloxane materials modified with tertiary amino groups were synthesized. FTIR, ¹H NMR were used to characterize the polysiloxane structure. The emulsions of the modified polysiloxanes are prepared. Some surface properties of the polysiloxane materials with tertiary amino groups as resins were discussed. The results show that the polysiloxane materials modified with tertiary amino side chains had good flexibility and the repellency to water. With increasing the amino value of the polysiloxanes, the flexibility of the fabrics treated with the emulsion was improved. After the samples treated with the polysiloxanes, the thermal yellowing of the polysiloxane had emerged. The whiteness of fabrics treated with the polysiloxane decreased. The K/S of the yellow fabrics treated with the modified polysiloxanes had not obvious change, the K/S of the red and blue fabrics treated with the modified polysiloxanes slightly decreased. The shapes of the reflectance spectra curves of the dyed fabrics treated without and with the modified polysiloxanes had not noticeable change.     

A series of novel side chain liquid crystalline polysiloxanes containing cyano‐ and cholesterol‐terminated substituents: Where will the structure‐dependence of terminal behavior of the side chain reappear?

A series of polysiloxane side chain liquid crystal polymers with strong polarity cyano substitution‐terminated achiral side chains and cholesterol‐terminated chiral side chains was successfully synthesized via thiol‐ene click chemistry. ¹H‐NMR, FT‐IR, and thermogravimetric analysis were used to confirm their chemical structures and thermal stabilities. Their phase transition behaviors and phase structures were systematically investigated by a combination of analysis methods such as differential scanning calorimetry, polarized optical microscopy, and X‐ray. Results revealed that attributing to the decisive role of the polarity interaction, all the polymers only developed a monolayer interdigitated SmA phase in which the period arrangement was determined by the cyano‐terminated side chains, the increased content of cholesterol‐terminated chiral side chains (X_chol) just expanded the distance between neighboring molecules within a layer. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1765–1772     

Microstructure elucidation of poly(epichlorohydrin) modified with thiol compounds using one- and two-dimensional NMR spectroscopy

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The NMR results show that using both aromatic and aliphatic thiols, one achieves degrees of modification of up to 90% without any elimination side reaction. As a consequence no degradative chain-scission takes place. A microstructural analysis of the modified polymers has been carried out by ¹³C NMR, ¹H NMR and ¹³C DEPT spectroscopy. Additionally, 2D heteronuclear correlated spectroscopy (HMQC and HMBC) were used in order to determine the chemical shifts of quaternary carbons.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

New amphiphilic polyacrylamides: Synthesis and characterisation of pseudo-micellar organisation in aqueous media

In order to offer new tools for developing structure-property relationships for intramolecular associative polymers (polysoaps), the synthesis of three families of comb-like amphiphilic cationic polymers with great structure variability is described. These polymers with amphiphilic repeating units are polyacryl or methacrylamides laterally substituted by a group containing a quaternary ammonium site and a hydrophobic alkyl side chain with 10-16 carbon atoms. Two complementary synthesis methods were developed successfully. In the first method, the tertiary amine groups of neutral polymer precursors were quaternised with various n-alkyl bromides. Five polymers were obtained in this way. On the contrary, the second method consisted of synthesizing first amphiphilic cationic acryl or methacrylamide monomers. The 11 monomers thus obtained were then polymerised by conventional free radical polymerisation in solution. The polymers obtained by both methods only differed in their molecular weights, the second method leading to much higher molecular weights (up to 2 × 10⁶ g/mol). A preliminary investigation of the properties of a few of these polymers in solution showed interesting amphiphilic behaviour. The variation of the reduced viscosity of hydro-methanolic polymer solutions with polymer concentration revealed a strong intramolecular macromolecular folding. The microdomains corresponding to the intramolecular association of the hydrophobic alkyl side chains were eventually characterised by pyrene fluorescence spectroscopy. The local polarity of the pyrene probe was considerably lowered with respect to that of the surrounding aqueous phase and was dependent upon the macromolecular structure of the amphiphilic cationic polymers.     

Functionalization of surface‐grafted polymethylhydrosiloxane thin films with alkyl side chains

Thin films of crosslinked polymethylhydrosiloxane (PMHS) have been grafted on silica using the sol–gel process allowing further functionalization by effective quantitative hydrosilylation of SiH groups by olefins within the network. Postfunctionalization gives the polysiloxane network with n‐alkyl side chains. The PMHS coating was prepared by room temperature polycondensation of a mixture of methyldiethoxysilane HSiMe(OEt)₂ monomer and triethoxysilane HSi(OEt)₃ (TH) as crosslinker. The surface‐attached films are chemically stable and covalently bonded to the silica surface. Subsequently, films were functionalized without delamination. We showed by FTIR spectroscopy how the crosslinking ratio and the molecular size of the alkenes precursors influence the extent of the hydrosilylation reaction of SiH groups in the PMHS network. We have determined that quasi‐full olefin addition catalyzed by a platinum complex occurred within soft networks of less than 5% TH with 1‐alkenes CH₂?CH(CH₂)_n‐2CH₃ of various alkyl chain lengths (n = 5, 11, 17). Powders of PMHS gel were also modified with 1‐alkenes by hydrosilylation. The SiH groups within the soft gel (5% crosslinked) were fully functionalized as shown by ²⁹Si and ¹H solid‐state NMR. The structure of functionalized polysiloxane with n‐octadecyl and n‐dodecyl side chains was studied by FTIR, wide angle X‐ray diffraction, and DSC showing crystallization of the long n‐alkyl chains in the network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3546–3562, 2008     

Preparation and surface properties of the polysiloxane material modified with fluorocarbon side chains

The novel polysiloxane material modified with fluorocarbon side chains was synthesized. FTIR, FNMR were used to characterize the copolymer structure. The emulsion of the modified polysiloxane was prepared. The reflectance spectrum of the dyed polyester fabric treated with the polymer was also discussed. The effect of the modified polysiloxane on the color fastness of the dyed polyester fabric was investigated. The results show that the novel polysiloxane material modified with fluorocarbon side chains had excellent surface activity. It did not affect the shade of color and the fastnesses of the dyed fabrics and could improve the handle of fabrics. The treated fabric with the modified polysiloxane showed excellent repellency to water.     

Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

Influence of alkyl chains of amphiphilic hyperbranched poly(ester amine)s on the phase‐transfer performances for acid dye and the aggregation behaviors at the interface

Hyperbranched poly(ester amine) (HPEA) with terminal secondary amine groups was synthesized by the Michael addition reaction between piperazine and trimethylolpropanetriacrylate with a molar ratio of 13:6. It was further reacted with a series of aliphatic acid chlorides, including stearoyl chloride, dodecanoyl chloride, and octanoyl chloride, to yield three modified amphiphilic hyperbranched polymers, which were termed HPEA‐C18, HPEA‐C12, and HPEA‐C8, respectively. These polymers were characterized with Fourier transform infrared, ¹H NMR, gel permeation chromatography, and differential scanning calorimetry measurements. Because of the existence of interior tertiary amine groups, the modified amphiphilic polymers were used as host molecules to extract the guest acid dye, methyl orange (MO), from the aqueous layer to the organic layer on the basis of the acid–base interaction. The influences of the pH of the aqueous layer and the length of the alkyl chains in the modified polymers on the phase‐transfer performances were investigated. The results indicated that more MO molecules could be extracted at a lower pH because of the formation of more quaternary ammonium ions within the host molecules. As the length of the alkyl chains in the modified polymers increased, both the transfer capability and the intermolecular aggregation at the interface were enhanced. The extracted MO could be reversibly released from the organic layer to the aqueous layer under basic conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2921–2930, 2005     

Structural and dynamic study of chemically modified polyHIPE by solid‐state 13C NMR spectroscopy

The structure of laboratory‐made polyHIPEs was successfully characterized by cross‐polarity/magic‐angle spinning, solid‐state ¹³C NMR experiments. The signals of vinyl groups appeared in the spectrum of the polyHIPE precursor PH? CH?CH₂, which was prepared by the polymerization of the divinylbenzene continuous phase from a highly concentrated reverse emulsion. This material was chemically modified by the regioselective free‐radical addition of thiols to the pendant vinyl groups. Spectra of materials modified by the grafting of C₈ and C₁₂ alkyl chains, PH? SC₈ and PH? SC₁₂, respectively, were produced. The signals of the vinyl groups disappeared in favor of methylene groups. This experiment clearly established that the alkyl chains were covalently bound to the polymer. To elucidate the dynamic aspect of long chains in polyHIPE, we measured the ¹³C spin–lattice relaxation times (T₁) of PH? SC₁₂ from 25 to 100 °C with variable‐temperature, solid‐state, high‐resolution ¹³C NMR spectroscopy, revealing a strong variation in T₁ along the alkyl side chain. Furthermore, the crystallinity of a wide range of chemically modified polyHIPEs, including PH? SC₁₂, was studied with pulse ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 956–963, 2001     

Synthesis of norbornenes containing cationic mono‐ and di(cyclopentadienyliron)arene complexes and their ring‐opening metathesis polymerization

A number of classes of polynorbornenes containing cationic iron moieties within their side chains were prepared via ring‐opening metathesis polymerization with a ruthenium‐based catalyst. The iron‐containing polymers displayed excellent solubility in polar organic solvents. The weight‐average molecular weights of these polymeric materials were estimated to be in the range of 18,000–48,000. Thermogravimetric analysis of these polymers showed two distinct weight losses. The first weight loss was in the range of 204–260 °C and was due to the loss of the metallic moieties, whereas the second weight loss was observed at 368–512 °C and was due to the degradation of the polymer backbone. Cyclic voltammetry studies of the iron‐containing polymers showed that the 18 e^? cationic iron centers underwent a reduction to give the neutral 19 e^? complexes at half‐wave potential (E_1/2) = ?1.105 V. Photolysis of the metallated polymers led to the isolation of the norbornene polymers in very good yields. Differential scanning calorimetry studies showed a sharp increase in the glass‐transition temperatures up to 91 °C when rigid aromatic side chains were incorporated into the norbornene polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3053–3070, 2006     

Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

Polysiloxanes with chlorobenzyl groups as precursors of new organic‐silicone materials

Various polysiloxanes bearing chlorobenzyl side groups were synthesized by the hydrolytic polycondensation of the 73:27 mol/mol mixture of [2‐(4‐chloromethylphenyl)ethyl] methyldichlorosilane and [1‐(4‐chloromethylphenyl)ethyl] methyldichlorosilane followed by the cationic equilibration or coequilibration with octamethylcyclotetrasiloxane, D₄. 1,3‐Divinyltetramethyl‐disiloxane was used as the chain end blocker to obtain a vinyl–Si ended chlorobenzyl‐substituted polysiloxane. In some cases, the polymer was additionally treated with dimethylvinylchlorosilane to achieve full substitution of chain ends by the vinyl group. Cohydrolysis of the chlorobenzylic monomer mixture with dimethyldichlorosilane was also practiced. Multiblock copolymers were obtained by polyhydrosilylation of the α,ω‐divinylsilyl chlorobenzyl‐substituted polysiloxanes with α,ω‐dihydrosilyl polydimethylsiloxanes. All these polymers and copolymers containing reactive chlorobenzylic groups were demonstrated to be convenient precursors of functional polysiloxanes of potential practical use. Some specific functional groups, such as quaternary ammonium salt groups of biocidal activity or azobenzene groups making the polymer sensitive to external stimuli by light, may be readily generated on polysiloxane under mild conditions. The chlorobenzylic substituted polysiloxanes may be also used as macroinitiators of the atom transfer radical polymerization, to obtain polysiloxanes with grafted organic polymers, such as styrene, 4‐chloromethylstyrene, and n‐butylacrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1682–1692, 2004     

Effect of oxadiazole side chains based on alternating fluorene-thiophene copolymers for photovoltaic cells

Three soluble alternating conjugated copolymers, comprised of 9,9-dihexylfluorene and thiophene derivatives with/without oxadiazole side chains, were synthesized via the palladium-catalyzed Suzuki coupling reaction. The structures of the polymers were confirmed with ¹H NMR and ¹³C NMR, and the effect of oxadiazole side chains on the thermal, optical, electrochemical and photovoltaic properties were investigated. The introduction of rigid oxadiazole side chains could benefit to improve thermal stabilities of the conjugated polymers. Cyclic voltammograms revealed that the LUMO energy levels of P2 and P3 were reduced in comparison with P1 due to the introduction of electron-deficient oxadiazole side chains, indicating that electron-injection and transporting properties have been improved. Photovoltaic cells (PVCs) were fabricated based on the blend of the as-synthesized copolymers and the fullerene acceptor [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) in a 1:1 weight ratio. The maximum power conversion efficiency (PCE = 1.49%) was obtained for P3 as the electron donor under the illumination of AM 1.5, 100 mW/cm².     

Synthesis of siloxane stationary phases for capillary gas chromatography and supercritical fluid chromatography

A comparison is made between dichlorosilanes and cyclic siloxanes as starting materials in the synthesis of stationary phases for capillary gas chromatography (CGC) and supercritical fluid chromatography (SFC). Siloxanes containing one or more of the side groups methyl, vinyl, phenyl, and cyanoethyl in various ratios were synthesized and compared. These phases were characterized by chromatographic (gel permeation, GPC), spectroscopic (IR, ¹H NMR, ²⁹Si NMR), and thermal (DSC) methods. Coated fused silica columns were evaluated with respect to polarity, crosslinkability with several free-radical initiators, and thermal stability. A new liquid phase, 7% cyanoethyl, 7% phenyl, 1% vinyl methyl polysiloxane is shown to be more polar than OV-1701, more temperature stable, easily crosslinked and suitable for use in supercritical fluid chromatography.     

Synthesis,characterization, and electroluminescence of fluorene and carbazole‐based blue light‐emitting polymers with different noncoplanar molecular architectures

In order to investigate the explicit optoelectronic variations of the photoluminescent polymer with sterically hindered side chains, three novel alternate polymers (P0, P1, and P2) based on fluorene and carbazole moieties were successfully synthesized through Suzuki coupling reaction. The molecular structures of the polymers were fully characterized by ¹H‐NMR, ¹³C‐NMR, elemental analysis, and gel permeation chromatograph, respectively. The photophysical properties, thermal stability, and energy band gaps of polymers P0, P1, and P2 were further examined through UV–vis absorption, photoluminescent spectra, differential scanning calorimetry, thermogravimetric analysis, and cyclic voltammetry. The experimental results indicated that the polymers took on wide band gaps of about 3.50 eV with deep blue emission in thin solid films. These polymers were found to show a high thermal stability with decomposition temperatures at 5% weight loss of the compounds in the range of 353–416 °C. Blue light‐emitting electroluminescent devices of the most branched polymer P2 with highest light‐emitting efficiency as emitting layers were characterized, which showed obviously improved spectral stabilities with respect to the parent polyfluorene materials. In conclusion, we have established an effective method to improve the spectral stabilities of polyfluorene material by synthesizing the zigzag‐shaped copolymer of fluorene and carbazole with sterically hindered pendant moieties of different molecular sizes. Copyright © 2014 John Wiley & Sons, Ltd.     

Polymerization of epoxidized vegetable oil derivatives: Ionic‐coordinative polymerization of methylepoxyoleate

Ring‐opening polymerization of epoxidized methyloleate (EMO) with various ionic‐coordinative initiators have been studied and compared with other internal epoxy monomers: benzyl 9,10‐epoxyoleoylether and cis‐4,5‐epoxyoctane. The structure and molecular weight of the resulting polymers have been studied by ¹H‐ and ¹³C‐NMR, MALDI‐TOF‐MS, and size exclusion chromatography analysis. Polymers with higher molecular weight than those obtained with conventional cationic catalyst are obtained. These materials have been found to consist of a complex mixture of cyclic and linear polymer chains with different chain ends that can be related to the catalyst nature and the occurrence of two main polymerization mechanisms, the cationic and the ionic‐coordinative. In the polymerization of EMO, transesterification by‐side reactions leading to ester linkages in the main chain have been identified. These undesired reactions have been suppressed by copolymerization with small amounts of tetrahydrofuran with no substantial decrease in the polymer yield and molecular weight. Finally, the polymerization of EMO has been tested in a larger scale to prepare a renewable resource‐based polyether as starting material to produce polyether polyols for polyurethane applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electroinitiated Polymerization of 3,3-BIS(N-Carbazolylmethyl)Oxetane

Abstract

3,3-Bis(N-carbazolylmethyl)oxetane, a cyclic compound with carbazolyl substituents closely linked to the oxetane ring, was polymerized by electrochemical initiation in aprotic polar solvents using a quaternary ammonium salt as electrolyte. Colored polymers were obtained as thin films deposited on the anode and were characterized by IR, ¹H NMR, and thermogravimetry. The data obtained refute the classical cationic polymerization of oxetanes.     

Synthesis and Properties of Perfluoroalkyl Groups Containing Double Four-Ring Spherosilicate (Siloxysilsesquioxane) Precursors

Organically modified cage-like double four-ring spherosilicates have received considerable interest in the construction of nanosized hybrid materials, as well as building units for structural well-defined polymers. This group is extended by perfluoroalkyl ligands containing spherosilicates, synthesized by addition reaction of the octahydridodimethylsiloxyoctasilsesquioxane [H(CH₃)₂Si]₈Si₈O₂₀ and heptadecafluorodecyl methacrylate. The resultant liquid spherosilicate substituted with eight terminal perfluoroalkyl groups was characterized by ²⁹Si and ¹³C NMR spectroscopies and MALDI Time-of-Flight mass spectrometry. Partial substitution of perfluoroalkyl ligands by trimethoxysilyl containing groups provides condensable precursors for the synthesis of hydrophobic and oleophobic materials via the sol-gel process. This new spherosilicate, carrying on average four perfluoroalkyl groups and four trimethoxysilyl groups shows better hydrophobic and oleophobic properties compared with commonly used perfluoroalkyltrialkoxysilanes under identical concentration of perfluoroalkyl chains. In addition a comprehensive literature survey is given on structural well characterized, organically modified cage-like double four-ring spherosilicates.     

The Role of Hydrophobicity in the Antimicrobial and Hemolytic Activities of Polymethacrylate Derivatives

We synthesized cationic random amphiphilic copolymers by radical copolymerization of methacrylate monomers with cationic or hydrophobic groups and evaluated their antimicrobial and hemolytic activities. The nature of the hydrophobic groups, and polymer composition and length were systematically varied to investigate how structural parameters affect polymer activity. This allowed us to obtain the optimal composition of polymers suitable to act as non-toxic antimicrobials as well as non-selective polymeric biocides. The antimicrobial activity depends sigmoidally on the mole fraction of hydrophobic groups (f_HB). The hemolytic activity increases as f_HB increases and levels off at high values of f_HB, especially for the high-molecular-weight polymers. Plots of HC₅₀ values versus the number of hydrophobic side chains in a polymer chain for each polymer series showed a good correlation and linear relationship in the log–log plots. We also developed a theoretical model to analyze the hemolytic activity of polymers and demonstrated that the hemolytic activity can be described as a balance of membrane binding of polymers through partitioning of hydrophobic side chains into lipid layers and the hydrophobic collapsing of polymer chains. The study on the membrane binding of dye-labeled polymers to large, unilamellar vesicles showed that the hydrophobicity of polymers enhances their binding to lipid bilayers and induces collapse of the polymer chain in solution, reducing the apparent affinity of polymers for the membranes.