双连续微乳体系中PbS纳米管的控制合成(英文)

PbS nanotubes were synthesized by the tiny water channels in bicontinuous microemulsions consisted of p-octyl polyethylene glycol phenylether (OP)/n-amyl alcohol/cyclohexane/water. The possible formation mechanism of PbS nanotubes is also discussed based on their shape evolutions. The results indicate that the formation of PbS nanotubes is probably via the process of the nucleation, growth, assemblage and crystallization.     

Synthesis of novel dansyl-labeled Celecoxib derivatives

Four novel dansyl-labeled derivatives of Celecoxib, a cyclooxygenase-2 (COX-2) selective inhibitor, were designed and synthesized. To realize the fluorophore-linker-approach divergent and convergent synthetic strategies were applied. Therefore Celecoxib p-benzoic acid, 8, was synthesized in a new and convenient way. The yield and the synthetic route to Celecoxib, 1, its pyrazolylic acid, 7, and its pyrazolylic methyl ester, 6, were improved. Through a convenient synthesis 1,11-diamino-3,6,9-trioxundecane, 19, was obtained in high yield and purity and used as a linker for the dansyl moiety.     

Dielectric Behavior of Middle Phase Microemulsion

l ntroductionMicroemulsiolls are transparent and nuid systems composed of water, oil andamphiphilic molecules. They form spontaneously with simple mixing. Microemulsionsmay be water- or oil- continuous and bicontinuous under some conditions of temperatureor composition. Middle phase microemulsions(MPME) is called the 'bicontinuousstate' which is considered to be a sponge-like random netWork. Owing to its ultralowinterfacial tellsiolls against the excess water and oil phase with which they ar…     

A novel three-step synthesis of Celecoxib via palladium-catalyzed direct arylation

A novel three linear step synthesis of Celecoxib was achieved in 33% overall yield via a key regioselective direct C-H arylation reaction between a 1,3-disubstituted pyrazole and an aryl bromide.     

Oriented Crystallization on Organic Monolayers to Control Concomitant Polymorphism

Nucleation events and crystal growth can be guided by molecular recognition at interfaces through intermolecular interactions. The short-acting antimicrobial sulfa drug sulfathiazole is known for its concomitant crystallization, which has five known polymorphs, due to conformational flexibility and hydrogen-bond synthon variation. In its development stage of a drug the issue of concomitant crystallization needs to be addressed with respect to patent litigation, including legal actions to protect patents against infringement. A functional self-assembled monolayer (SAM) of organic thiol on a gold surface has been employed as an efficient approach to control concomitant nucleation of such flexible drugs. The crystallization on a SAM surface is mostly kinetically driven and often leads to the nucleation of novel metastable forms. Spectroscopic, thermal analysis and X-ray diffraction studies reveal that a previously unknown, sixth form of the drug nucleates on the designed SAM surface.     

Crystallization of inorganic compounds in polymer solutions. Part I: Control of shape and form of calcium carbonate

Calcium carbonate was precipitated by mixing aqueous solutions of sodium carbonate and calcium nitrate in the presence of water-soluble polymers. When the former was poured into the latter, in which a certain amount of sodium poly(styrenesulfonate) was dissolved, monodisperse spherical crystals were created. The crystal form was vaterite, although, in the absence of the polymer, calcite crystals were obtained in rhombic shape. The factors deciding the shape and form of the crystal were investigated and the role of polymer in the formation of unique crystals was discussed.     

Preliminary Study on the Use of Water-in-Oil Microemulsion Eluents in HPLC

This paper describes the use of water-in-oil (W/O) microemulsion eluents to achieve unique normal phase HPLC separations. The effects of varying the oil type, co-surfactant, surfactant, use of mixed surfactant and water concentration upon the chromatographic performance was assessed. Other parameters such as temperature and flow rate were also investigated. An optimised set of W/O microemulsion HPLC (MELC) operating conditions was then applied to the separation of a range of acids, bases and neutral compounds. The more water soluble compounds were more highly retained. W/O MELC was found to be especially suitable for determination of water insoluble compounds. The drug content in bumetanide tablets was determined by W/O MELC with good linearity and accuracy. The solubilising ability of the W/O microemulsion reduced sample preparation (precipitation and extraction) requirements compared to conventional HPLC. The results obtained compared well with those obtained by a validated reverse phase HPLC method. It is recommended that W/O MELC should be considered for routine applications, especially for the analysis of water insoluble compounds in complex sample matrices. Further research is recommended to more definitely assess the operating parameters of W/O MELC and to determine other applications.     

Microemulsion copolymerization of styrene and acrylonitrile with n‐butanol as the cosurfactant

The microemulsion copolymerization of styrene and acrylonitrile in an n‐butanol/cetyltrimethylammonium bromide/oil/water microemulsion system was studied. The solubilization sites of the two monomers were determined with an NMR technique. The results showed that the solubilization behaviors of the two monomers were quite different. Most of the styrene was solubilized in the palisade layer of the microemulsion, whereas the acrylonitrile had an equilibrium distribution in the aqueous phase and palisade layer of the microemulsion. The reactivity ratios of styrene and acrylonitrile in the microemulsion system were different from those in other media. The effect of the monomer feed composition on the copolymerization kinetics was investigated, and the mechanism of nucleation of the latex particles was examined. The experimental results showed that the copolymerization loci were changed from the microemulsion droplets to the aqueous phase when the concentration of acrylonitrile in the monomer feed reached approximately 80%; this could be further proved by the effect of the monomer feed composition on the copolymerization kinetics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 203–216, 2005     

Laser‐Induced Crystallization and Crystal Growth

Recent streams of laser studies on crystallization and crystal growth are summarized and reviewed. Femtosecond multiphoton excitation of solutions leads to their ablation at the focal point, inducing local bubble formation, shockwave propagation, and convection flow. This phenomenon, called “laser micro tsunami” makes it possible to trigger crystallization of molecules and proteins from their supersaturated solutions. Femtosecond laser ablation of a urea crystal in solution triggers the additional growth of a single daughter crystal. Intense continuous wave (CW) near infrared laser irradiation at the air/solution interface of heavy‐water amino acid solutions results in trapping of the clusters and evolves to crystallization. A single crystal is always prepared in a spatially and temporally controlled manner, and the crystal polymorph of glycine depends on laser power, polarization, and solution concentration. Upon irradiation at the glass/solution interface, a millimeter‐sized droplet is formed, and a single crystal is formed by shifting the irradiation position to the surface. Directional and selective crystal growth is also possible with laser trapping. Finally, characteristics of laser‐induced crystallization and crystal growth are summarized.     

非水反相微乳的加溶与电导性质研究

研究了若干非水极性溶剂（甲酰胺、二甲基亚砜和乙腈）及其与水的混合物/AOT/正庚烷反相微乳体系的加溶性质及其电导行为.结果表明，在AOT反相微乳中，非水极性溶剂的最大加溶量均远小于水的加溶量.其最大加溶量顺序为二甲基亚砜< 甲酰胺< 乙腈< 水.甲酰胺和乙腈与水的加溶相互抵制，而水在一定范围内可促进二甲基亚砜的加溶.非水反相微乳的电导率随加溶量的变化规律与含水反相微乳体系类同，但到达电导率极大值和出现渗滤时的加溶量明显比含水反相微乳 体系的要小.     

纳米粒子稳定乳液及其在纳米结构合成中的应用*

本文在介绍常规乳状液、微乳液和固体稳定乳液的基础上,着重综述了纳米粒子稳定乳液的特点及其在纳米结构合成中的应用进展,并对目前该研究领域亟待解决的问题进行了分析。纳米粒子稳定乳液具有独特的油、水、固三相环境和水油、水固、油固三个相界面,分散相液滴尺寸可以在微米、亚微米乃至纳米尺度调节,因而可以作为合成组成、结构和性能极为丰富多样的纳米结构的介质。纳米粒子对乳液稳定作用的机理,以及纳米粒子稳定乳液中化学反应的特殊规律还有待深入研究。本文在介绍固体稳定乳液的基础上,着重综述了纳米粒子稳定乳液的特点及其在纳米结构合成中的应用进展,并对目前该研究领域亟待解决的问题进行了分析。纳米粒子稳定乳液具有独特的油、水、固三相环境和水油、水固、油固三个相界面,分散相液滴尺寸可以在微米、亚微米乃至纳米尺度调节,因而可以作为合成组成、结构和性能极为丰富多样的纳米结构的介质。纳米粒子对乳液稳定作用的机理,以及纳米粒子稳定乳液中化学反应的特殊规律还有待深入研究。     

Sonocrystallization Yields Monoclinic Paracetamol with Significantly Improved Compaction Behavior

Ultrasound‐assisted crystallization (sonocrystallization) was used to prepare a mixture of nano‐ and micrometer‐sized crystals of the monoclinic form of paracetamol—a widely used analgesic known for its particularly problematic mechanical behavior under compression (i.e. poor tabletability). The nano‐ and micrometer‐sized crystals yielded a powder which exhibits elastic moduli and bulk cohesions that are significantly higher than those observed in samples consisting of macrometer‐sized crystals, thus leading to enhanced tabletability without the use of excipients, particle coating, salt, or cocrystal formation. Experimental compaction and finite element analysis were utilized to rationalize the significantly improved compaction behavior of the monoclinic form of paracetamol.     

A positive-microemulsion method for preparing nearly uniform Ag2Se nanoparticles at low temperature

A positive-microemulsion system (water/sodium linoleate/hexane) was used to make uniform Ag2Se nanoparticles at low temperature (7-10 degrees C) within five to ten minutes. The proposed interface-reaction mechanism was corroborated by transmission electron microscopy (TEM), IR spectroscopy, and X-ray photoelectron spectroscopy (XPS) results. This is a general method that is ideal for making other uniform nanoparticles on a large scale through simple precipitation reactions.     

Simplified Solid-Phase Extraction Procedure and Liquid Chromatographic Determination of Celecoxib in Rat Serum

A simplified solid phase extraction method, eliminating a preliminary protein precipitation has been developed for the determination of celecoxib in rat plasma. The technique included a solid phase extraction of the serum samples on a [poly (divinylbenzene-co-N-vinylpyrrolidone)] sorbent. After conditioning, the cartridge was loaded with 0.5 mL of acidified serum containing internal standard. Elution was made with 1 mL of a mixture of acetonitrile and methanol (1/1, v/v). After evaporation of the eluate to dryness and reconstitution with methanol, the samples were analyzed on an octadecyl bonded phase with several mobile phases containing acetonitrile and a phosphate buffer. Detection was carried out using a Photodiode Array Detector. Full validation of the proposed method was provided (linearity range: 0.01–2 mg. L^–1, average extraction efficiency: 92.4%; average intra-day variability: 4.6% with an accuracy of 94.8%; average interday variability: 5% with an accuracy of 95.3%, limit of detection: 0.005 mg. L^–1, limit of quantification: 0.002 mg. L^–1). The proposed method was successfully utilised to quantify celecoxib in rat plasma for a pharmacokinetic study.Revised: 26 January and 23 April 2004     

聚芳醚酮醚酮酮类聚合物的结晶与多晶型

晶体结构;聚芳醚酮醚酮酮类聚合物的结晶与多晶型     

Nanodroplet Cluster Formation in Ionic Liquid Microemulsions

A common ionic liquid (IL), 1‐butyl‐3‐methylimidazolium tetrafluoroborate (bmimBF₄), is used as polar solvent to induce the formation of a reverse bmimBF₄‐in‐toluene IL microemulsion with the aid of the nonionic surfactant Triton X‐100. The swelling process of the microemulsion droplets by increasing bmimBF₄ content is detected by dynamic light scattering (DLS), conductivity, UV/Vis spectroscopy, and freeze‐fracture transmission electron microscopy (FF–TEM). The results show that the microemulsion droplets initially formed are enlarged by the addition of bmimBF₄. However, successive addition of bmimBF₄ lead to the appearance of large‐sized microemulsion droplet clusters (200–400 nm). NMR spectroscopic analysis reveal that the special structures and properties of bmimBF₄ and Triton X‐100 together with the polar nature of toluene contribute to the formation of such self‐assemblies. These unique self‐assembled structures of IL‐based microemulsion droplet clusters may have some unusual and unique properties with a number of interesting possibilities for potential applications.     

Celecoxib determination in different layers of skin by a newly developed and validated HPLC‐UV method

A simple, rapid and sensitive analytical procedure for the measurement of celecoxib (CXB) levels in skin samples after in vitro penetration studies was developed and validated. In vitro permeability studies in porcine skin were performed for quantification of CXB at different layers of skin, the stratum corneum (SC) and epidermis plus dermis (EP + D) as well as in the acceptor solution (AS) to assess CXB permeation through skin. CXB was quantified by HPLC using a C₁₈ column and UV detection at 251 nm. The mobile phase was methanol–water 72:28 (v/v) and the flow‐rate was 0.8 mL/min. The CXB retention time was 5 min. The assay was linear for CBX in the concentration range of 0.1–3.0 μg/mL in the AS (drug permeated through skin) and 5.0–50.0 μg/mL for drug retained in SC and [EP + D] in vitro. The linear correlation coefficients for the different calibration curves were equal or greater than 0.99. Intra‐ and inter‐assay variabilities were below 8.0%. Extraction of CXB from skin samples showed recoveries higher than 95.0% after 15 min of ultrasonic sound and centrifugation at 2500 rpm for 3 min. The method was considered appropriate for the assay of CXB in skin samples, after in vitro cutaneous penetration studies. Copyright © 2011 John Wiley & Sons, Ltd.