矿化剂对水热法改性氢氧化镁晶体的影响

近几年来,氢氧化镁作为一种无机阻燃剂由于其具有制备条件相对温和,生产工艺简单且产品与自然环境友好等特点,在研究及生产活动方面备受关注且得到了长足的发展[1～4].目前采用氢氧化钠法进行反应一水热制备高分散阻燃级氢氧化镁的工艺路线已经比较成熟[5～8].然而,不利的是,氢氧化钠偏高的价格导致了产品的制造成本较高.而采用石灰法制备氢氧化镁阻燃剂具有价格低廉的特点,引起了人们的关注.     

双注-水热法制备高分散氢氧化镁纳米片

本工作以氯化镁、氢氧化钠为原料，氯化钠为衬底溶液，探讨了采用双注-水热法制备高分散氢氧化镁纳米片的可行性。结果表明：采用双注方式或提高衬底溶液氯化钠浓度均有利于降低反应体系过饱和度，改善常温产物的结晶性和分散性；对常温合成的氢氧化镁进行水热处理可进一步提高产物的结晶度，形成形貌规则、粒径分布窄、分散良好的氢氧化镁纳米片。     

Facile Synthesis and Catalytic Properties of β-Co（OH）2 and Mg（OH）2 Nanoplates

β-Co(OH)2 and Mg(OH)2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction(SAED),and gas chromatograph.     

Controlled synthesis of single-crystalline Mg(OH)2 nanotubes and nanorods via a solvothermal process

The synthesis of Mg(OH)₂ one-dimensional (1D) nanostructures was systematically investigated in different solvents at various temperatures with Mg₁₀OH₁₈Cl₂·5H₂O nanowires as source materials. The results showed that the characters of the products, such as crystal size, shape, and structure, were strongly influenced by the solvent and temperature during the solvothermal process. 1D nanotubes of Mg(OH)₂, with 80-300 nm outer diameter, 30-80 nm wall thickness, and several tens of micrometers in length were obtained by choosing bidentate ligand solvents such as ethylenediamine and 1,6-diaminohexane as the reaction solvent. But when using monodentate ligand pyridine as the reaction solvent, the obtained samples showed nanorods morphology. The Mg(OH)₂ thus produced was analyzed by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution electron microscopy (HRTEM), and selected-area electron diffraction (SAED). The possible growth mechanism of the 1D nanostructure Mg(OH)₂ was discussed.     

3D nanostructured Ni(OH)2 microspheres as an efficient immobilization matrix of Ru(bpy)3 for high-performance electrochemiluminescence sensor

The electrochemistry and electrochemiluminescence (ECL) of novel three-dimensional nanostructured Ru(bpy)₃²⁺/Ni(OH)₂ microspheres were investigated for the first time. The negatively charged porous Ni(OH)₂ microspheres composed of Ni(OH)₂ nanowires were specifically designed to interact with Ru(bpy)₃²⁺. The large surface area and porous structure of Ni(OH)₂ microspheres enhance loading of Ru(bpy)₃²⁺ and mass transport of the model analyte, tripropylamine (TPA). Excellent ECL performance of the presented sensor was achieved including good stability and wide linear range from 7.7 × 10⁻¹⁰ to 3.8 × 10⁻³ M with the detection limit of 2.6 × 10⁻¹⁰ M to TPA.     

NiO纳米片和多孔纳米片自组装的空心微球的无模板水热法制备与磁学性质

报道一种非常简单的制备NiO和Ni(OH)₂空心微球的无模板水热法, 即通过NiCl₂与氨水在140 ℃水热反应12 h, 制备了Ni(OH)₂纳米片自组装的空心微球, 经400 ℃热处理2 h得到了NiO空心微球. 采用X射线衍射仪、扫描电镜和透射电子显微镜对产物进行表征, 并在室温下测试了它的磁学性能, 结果表明, Ni(OH)₂空心微球的直径约为3～4 μm, 它是由尺寸1.1～1.3 μm左右的六方相结构的Ni(OH)₂纳米片组装而成; NiO空心微球是由立方相纳米片和多孔纳米片组装而成, 它具有弱的铁磁性, 其矫顽力为583 Oe, 剩余磁化强度为0.213 emu/g. 研究了氨在Ni(OH)₂纳米片的形成与组装过程中的作用, 提出了可能的生长机理.     

β‐Co(OH)2 Nanosheets: A Superior Pseudocapacitive Electrode for High‐Energy Supercapacitors

In this work, β‐Co(OH)₂ nanosheets are explored as efficient pseudocapacitive materials for the fabrication of 1.6 V class high‐energy supercapacitors in asymmetric fashion. The as‐synthesized β‐Co(OH)₂ nanosheets displayed an excellent electrochemical performance owing to their unique structure, morphology, and reversible reaction kinetics (fast faradic reaction) in both the three‐electrode and asymmetric configuration (with activated carbon, AC). For example, in the three‐electrode set‐up, β‐Co(OH)₂ exhibits a high specific capacitance of ∼675 F g⁻¹ at a scan rate of 1 mV s⁻¹. In the asymmetric supercapacitor, the β‐Co(OH)₂∥AC cell delivers a maximum energy density of 37.3 Wh kg⁻¹ at a power density of 800 W kg⁻¹. Even at harsh conditions (8 kW kg⁻¹), an energy density of 15.64 Wh kg⁻¹ is registered for the β‐Co(OH)₂∥AC assembly. Such an impressive performance of β‐Co(OH)₂ nanosheets in the asymmetric configuration reveals the emergence of pseudocapacitive electrodes towards the fabrication of high‐energy electrochemical charge storage systems.     

Formation of β-nickel hydroxide plate-like structures under mild conditions and their optical properties

Nanostructural β-nickel hydroxide (β-Ni(OH)₂) plates were prepared using the microwave–hydrothermal (MH) method at a low temperature and short reaction times. An ammonia solution was employed as the coordinating agent, which reacts with [Ni(H₂O)₆]²⁺ to control the growth of β-Ni(OH)₂ nuclei. A trigonal β-Ni(OH)₂ single phase was observed by X-ray diffraction (XRD) analyses, and the crystal cell was constructed with structural parameters and atomic coordinates obtained from Rietveld refinement. Field emission scanning electron microscopy (FE-SEM) images revealed that the samples consisted of hexagonal-shaped nanoplates with a different particle size distribution. Broad absorption bands assigned as transitions of Ni²⁺ in oxygen octahedral sites were revealed by UV–vis spectra. Photoluminescence (PL) properties observed with a maximum peak centered in the blue-green region were attributed to different defects, which were produced during the nucleation process. We present a growth process scheme of the β-Ni(OH)₂ nanoplates.     

Synthesis and characterization of flower-like β-Ni(OH)2 nanoarchitectures

Flower-like Ni(OH)₂ nanoarchitectures have been synthesized through a one-step mild hydrothermal reaction with the aid of ethylenediamine in NiCl₂ aqueous solution. The flower with the size of several micrometers in diameter is composed of the ultra-thin nanosheets of several nanometers in thickness. It was found the ethylenediamine is vital to the formation of the flower-like nanoarchitectures. The influence of the concentration of the ethylenediamine and the reaction temperature on the formation of the flowers was analyzed and the formation mechanism of the flowers was proposed. Such flower-like β-Ni(OH)₂ nanoarchitectures will find potential applications in the fields, such as electrode, or will be used as a starting material to produce NiO, which is widely used in the magnetic, catalysts, sensor and electrochromic devices.     

前驱体Ni(OH)2对LiCo0.3Ni0.7O2正极材料的影响研究

研究了两种不同前驱体Ni(OH)₂对LiCo_0.3Ni_0.7O₂锂离子电池正极材料的结构与电化学性能的影响，并用XRD、SEM及电性能测试考察了材料的结构、形貌与电化学性能。结果表明，前驱体Ni(OH)₂的形貌、结晶形态对LiCo_0.3Ni_0.7O₂正极材料的性能有极大的影响。与目前镍酸锂合成需高密度球形镍前驱体Ni(OH)₂认识不同，本文发现呈枝晶网络状结构、表面蓬松、比表面积高和振实密度低的前驱体Ni(OH)₂具有较高的化学活性，可有效抑制产物LiCo_0.3Ni_0.7O₂正极材料中阳离子混排产物的生成。由其制备的目标正极材料LiCo_0.3Ni_0.7O₂显示出较优的电化学性能，首次放电容量为175 mAh·g^-1，首次放电效率为93.9%，40次循环容量保持率为94.8%，显示较好的循环稳定性。     

离子交换-双氧水氧化法制备纳米CeO2晶体

以99.995% Ce(NO₃)₃和强碱性阴离子交换树脂为原料，采用离子交换-双氧水氧化法合成制备出纳米CeO₂晶体。并就离子交换反应中的Ce³⁺浓度、树脂加入速度和离子交换温度及H₂O₂加入速度等条件对CeO₂粒径的影响进行了探讨，得出了离子交换-双氧水氧化法制备纳米CeO₂晶体的最佳工艺条件。FTIR、TEM分析表明，离子交换法无需对合成的Ce(OH)₃溶胶进行洗涤即可去除NO₃^-、CO₃^2-等阴离子杂质，并用H₂O₂将该溶胶氧化，经真空干燥可制得粒径分布均匀，平均晶粒尺寸约3 nm，高纯度的CeO₂粉体。     

CO Oxidation on Cu/MgO-SiO2 Sol-Gel Derived Catalysts

Sol-gel Cu//MgOSiO₂ catalysts were prepared gelling tetraethoxysilane (TEOS), magnesium ethoxide and copper acetylacetonate at pH 3 and pH 9. The catalysts shown specific surface areas ca. 500 m²/g and 140 m²/g for pH 9 and pH 3 preparations respectively. Si(OH) and Si(OH)₂ hydroxy groups were observed by MAS-RMN spectroscopy in both preparations. CO₂-TPD and NH₃-TPD desorption thermograms showed that acid and basic sites were formed on the catalysts surface. It has been found that the catalysts having the highest density of basic sites were the catalysts showing the highest activity for the CO oxidation. It is proposed that the catalytic activity depends of the relative Cu⁼¹/Cu⁼² stability given by the support acidity.     

Thermodynamic Model for the Solubility of Cr(OH)3(am) in Concentrated NaOH and NaOH–NaNO3 Solutions

The main objective of this study was to develop a thermodynamic model for predicting Cr(III) behavior in concentrated NaOH and in mixed NaOH–NaNO₃ solutions for application to developing effective caustic leaching strategies for high-level nuclear waste sludges. To meet this objective, the solubility of Cr(OH)₃(am) was measured in 0.003 to 10.5 m NaOH, 3.0 m NaOH with NaNO₃ varying from 0.1 to 7.5 m, and 4.6 m NaNO₃ with NaOH varying from 0.1 to 3.5 m at room temperature (22 ± 2°C). A combination of techniques, X-ray absorption spectroscopy (XAS) and absorptive stripping voltammetry analyses, were used to determine the oxidation state and nature of aqueous Cr. A thermodynamic model, based on the Pitzer equations, was developed from the solubility measurements to account for dramatic increases in aqueous Cr with increases in NaOH concentration. The model includes only two aqueous Cr species, Cr(OH) ₄ ^– and Cr₂O₂(OH) ₄ ^– (although the possible presence of a small percentage of higher oligomers at >5.0 m NaOH cannot be discounted) and their ion–interaction parameters with Na⁺. The logarithms of the equilibrium constants for the reactions involving Cr(OH) ₄ ^– [Cr(OH)₃(am) + OH^– Cr(OH) ₄ ^– ] and Cr₂O₂(OH) ₄ ^2– [2Cr(OH)₃(am) + 2OH^– Cr₂O₂(OH) ₄ ^2– + 2H₂O] were determined to be –4.36 ± 0.24 and –5.24 ± 0.24, respectively. This model was further tested and provided close agreement between the observed Cr concentrations in equilibrium with Cr(OH)₃(am) in mixed NaOH–NaNO₃ solutions and with high-level tank sludges leached with and primarily containing NaOH as the major electrolyte.     

Solution/Ammonolysis Syntheses of Unsupported and Silica-Supported Copper(I) Nitride Nanostructures from Oxidic Precursors

Herein we describe an alternative strategy to achieve the preparation of nanoscale Cu₃N. Copper(II) oxide/hydroxide nanopowder precursors were successfully fabricated by solution methods. Ammonolysis of the oxidic precursors can be achieved essentially pseudomorphically to produce either unsupported or supported nanoparticles of the nitride. Hence, Cu₃N particles with diverse morphologies were synthesized from oxygen-containing precursors in two-step processes combining solvothermal and solid−gas ammonolysis stages. The single-phase hydroxochloride precursor, Cu₂(OH)₃Cl was prepared by solution-state synthesis from CuCl₂·2H₂O and urea, crystallising with the atacamite structure. Alternative precursors, CuO and Cu(OH)₂, were obtained after subsequent treatment of Cu₂(OH)₃Cl with NaOH solution. Cu₃N, in the form of micro- and nanorods, was the sole product formed from ammonolysis using either CuO or Cu(OH)₂. Conversely, the ammonolysis of dicopper trihydroxide chloride resulted in two-phase mixtures of Cu₃N and the monoamine, Cu(NH₃)Cl under similar experimental conditions. Importantly, this pathway is applicable to afford composite materials by incorporating substrates or matrices that are resistant to ammoniation at relatively low temperatures (ca. 300 °C). We present preliminary evidence that Cu₃N/SiO₂ nanocomposites (up to ca. 5 wt.% Cu₃N supported on SiO₂) could be prepared from CuCl₂·2H₂O and urea starting materials following similar reaction steps. Evidence suggests that in this case Cu₃N nanoparticles are confined within the porous SiO₂ matrix.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Solubility and solubility product of crystalline Ni(OH)2

The solubility of crystalline Ni(OH)₂ was studied in solutions of 0.01M NaC10₄ with pH ranging from 7 to near 14. Equilibrium was approached both from over-and undersaturation, and the equilibration times extended from 3 to 90 days. The solubility of Ni(OH)₂(c) in the pH range of approximately 7 to 11.3 was effectively modeled by including aqueous Ni²⁺ and NiOH⁺ species. Values of the logarithm of the thermodynamic equilibrium constants for the reactions [Ni(OH)₂(c) ⇌ Ni²⁺ + 2OH^-] and [Ni²⁺ + OH^- ⇌ Ni(OH)⁺] were determined to be -16.1±0.1 and 5.65 ± 0.10, respectively. These data, in conjunction with Pitzer ion interaction parameters given in the literature, were used to model the reported solubilities of Ni(OH)₂(c) in chloride, sodium acetate, and potassium chloride solutions. The model predictions for these systems were in excellent agreement with the experimental data from the literature.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Environmental Mobility of Pu(IV) in the Presence of Ethylenediaminetetraacetic Acid: Myth or Reality?

Ethylenediaminetetracetic acid (EDTA), which was co-disposed with Pu at several US Department of Energy sites, has been reported to enhance the solubility and transport of Pu. It is generally assumed that this enhanced transport of Pu in geologic environments is a result of complexation of Pu(IV) with EDTA. However, the fundamental basis for this assumption has never been fully explored. Whether EDTA can mobilize Pu(IV) in geologic environments is dependent on many factors, chief among them are not only the complexation constants of Pu with EDTA and dominant oxidation state and the nature of Pu solids, but also (1) the complexation constants of environmentally important metal ions (e.g., Fe, Al, Ca, Mg) that compete with Pu for EDTA and (2) EDTA interactions with the geomedia (e.g., adsorption, biodegradation) that reduce effective EDTA concentrations available for complexation. Extensive studies over a large range of pH values (1 to 14) and EDTA concentrations (0.0001 to 0.01 mol⋅L⁻¹) as a function of time were conducted on the solubility of 2-line ferrihydrite (Fe(OH)₃(s)), PuO₂(am) in the presence of different concentrations of Ca ions, and mixtures of PuO₂(am) and Fe(OH)₃(s). The solubility data were interpreted using Pitzer’s ion-interaction approach to determine/validate the solubility product of Fe(OH)₃(s), the complexation constants of Pu(IV)-EDTA and Fe(III)-EDTA, and to determine the effect of EDTA in solubilizing Pu(IV) from PuO₂(am) in the presence of Fe(III) compounds and aqueous Ca concentrations. Predictions based on these extensive fundamental data show that environmental mobility of Pu as a result of Pu(IV)-EDTA complexation as reported/implied in the literature is a myth rather than the reality. The data also show that in geologic environments where Pu(III) and Pu(V) are stable, the EDTA complexes of these oxidation states may play an important role in Pu mobility.     

纳米CuFe2O4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe₂O₄-rGO复合材料。通过X射线衍射（XRD）,扫描电子显微镜（SEM）、透射电子显微镜（TEM）和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe₂O₄纳米粒子均匀地分散在石墨烯片层间,其中CuFe₂O₄-20% rGO复合材料具有最优的电化学性能,当电流密度1 A·g^-1时,其比电容为1 952.5 F·g^-1,当电流密度为1 A·g^-1时,CuFe₂O₄-20% rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

Local Structure of Nanoscopic Magnesium Hydroxide ­Fluorides Studied by Natural Abundance 25Mg Solid State NMR Spectroscopy

Along with X‐ray diffraction measurements, ²⁵Mg solid state NMR experiments were performed in natural abundance at 9.4 T on crystalline and mechanically milled samples of MgO, Mg(OH)₂, MgF₂, and magnesium hydroxide fluorides Mg(OH)_xF_2–x prepared on mechanochemical and sol‐gel syntheses routes. In addition to single pulse and spin‐echo sequences, both static ¹H‐²⁵Mg CP and ¹⁹F‐²⁵Mg CP measurements allowed the registration of ²⁵Mg spectra in attractive short measurement times. Although an assignment of different magnesium species in magnesium hydroxide fluorides is only hardly possible, position and line shapes of ²⁵Mg spectra of magnesium hydroxide fluorides reflect chemically reliable trends. All samples studied here show a sixfold fluorine, oxygen, or mixed fluorine / oxygen coordination of magnesium, also in highly disordered samples.