Solid‐Phase Room‐Temperature Phosphorescence

Abstract

Solid‐phase phosphorescence (SPP) has become an established approach for the trace analysis of organic compounds. More recently, SPP has been successfully applied to the trace analysis for inorganic species. In this mini review, initially a brief overview of SPP is given. Then the important aspects related to adsorption of the phosphors on the solid phase are discussed. In addition, the basic photophysical aspects of phosphorescence are presented. The physicochemical interactions in SPP, such as the rigidity of the solid phase, effects of oxygen and moisture, heavy‐atom salts, and temperature, are considered. Finally, several recent applications of SPP to both organic and inorganic compounds are discussed.     

Preparation and Characterization of Prometryn Molecularly Imprinted Solid‐Phase Microextraction Fibers

Abstract

A novel reproducible solid‐phase microextraction (SPME) coating was prepared on the surface of silanized silica fibers by molecularly imprinted polymerization using prometryn as template molecule. The structure and extraction performance of molecularly imprinted polymer (MIP) coating was studied with the scanning electron microscope and high performance liquid chromatography (HPLC). Specific selectivity was found with the prometryn MIP‐coated fiber to prometry and its structural analogues such as atrazine, simetryn, terbutylazin, ametryn, propazine and terbutryn. In contrast, these triazines could not be selectively extracted by the non‐imprinted polymer fiber or commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), polyacrylate (PA) fibers.     

Fiber-in-Tube Solid Phase Extraction (FIT-SPE) for Miniaturized Sample Preparation Process

A typical analytical separation procedure has several important steps: sample preparation, isolation, identification, quantitation, statistical evaluation and final decision. Each step is alwayscritical to obtain correct results to fulfill the analytical purpose. In these various steps sample     

Fiber-in-Tube Solid Phase Extraction (FIT-SPE) for Miniaturized Sample Preparation Process

Atypicalanalyticalseparation procedurehasseveralimportantsteps :samplepreparation ,isola tion ,identification ,quantitation ,statisticalevalua tionandfinaldecision .Eachstepisalwayscriticaltoobtaincorrectresultstofulfilltheanalyticalpur pose .Inthesevario…     

Solid‐Phase Synthesis of Sialyl Tn Antigen

Solid‐phase synthesis of sialyl Tn [α‐Neu5Ac‐(2→6)‐α‐GalNAc‐(1→O)‐Ser] antigen with Kenner's acylsulfonamide linker is described. The acylsulfonamide bond was found to be stable under glycosylation reactions using dimethyl(methylthio)sulfonium triflate (DMTST) as a promoter and basic conditions used for the removal of protecting groups. The solid‐phase reaction was monitored by the inverse gated decoupling ¹³C NMR technique, which enabled quantitative analysis of the reaction progress. At the end of the synthesis, the sulfamyl group of the linker was activated by treatment with (trimethylsilyl)diazomethane to provide a N‐methyl‐N‐acylsulfonamide. The acyl group was displaced with hydroxide to give the corresponding precursors of sialyl Tn antigen and its anomeric isomers, which were deprotected to afford the target molecules.      

Preparation and Characterization of Heparin‐Stabilized Gold Nanoparticles

A simple method for preparing gold nanoparticles in aqueous solution has been developed by using glycosaminoglycan‐heparin as reducing and stabilizing agent and HAuCl₄ as precursor. The obtained gold nanoparticles were characterized by UV‐vis spectroscopy, resonance light scattering spectroscopy (RLS), transmission electron microscopy (TEM) and electrophoresis technology. The influence of reactant concentration for the preparation of gold nanoparticles was investigated. The results indicated that the gold nanoparticles carried negative charges in the aqueous solution and the size and shape of the gold nanoparticles could be controlled by changing the concentration of the heparin. Moreover, the gold nanoparticles obtained with relatively high concentration of heparin were very stable and had relative narrow size distribution.     

Preparation of Comb‐like Styrene Grafted Silica Nanoparticles

Abstract

Comb‐like polystyrene grafted silica nanoparticles (c‐PS‐SNs) were prepared by the following steps: (a) methacryloxypropyl silica nanoparticles (MPSNs) were used as macromonomer and free radical copolymerized with 4‐vinyl benzyl chloride (VBC) by a solution polymerization method; (b) the product of (A), poly(4‐vinyl benzyl chloride) grafted silica nanoparticle (PVBC‐SN) was separated and then used as a macroinitiator for the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of styrene catalyzed by the complex of Cu(I)Br and 2,2′‐bipyridyl (bipy) in toluene solutions. The structurally well‐defined polymer chains were grown from the nanoparticle surfaces to yield particles composed of a silica core and a well defined, densely grafted outer comb‐like PS layer. A percentage of grafting (PG%) (the weight ratio of the PS grafted with that of the silica charged) of more than 80% was achieved after a polymerizing time of 5?hr.     

Novel Method for Preparation of Monoesters of Symmetric Diphenolic Compounds like Curcumin (1,7‐Bis(4‐hydroxy‐3‐methoxy phenyl)‐1,6‐heptadiene‐3,5‐dione) via Solid‐Phase Synthesis

Synthesis of a monoester of symmetrical diphenolic compound curcumin (1,7‐bis(4‐hydroxy‐3‐methoxy phenyl)‐1,6‐heptadiene‐3,5‐dione) with glycine has been carried out by anchoring one of its free phenolic groups to an insoluble polymeric solid‐support resin controlled pore glass‐long chain alkylamine (CPG‐LCAA) via a 2‐carbon linker by solid‐phase synthesis. The other free phenolic was esterified selectively with N‐protected glycinoyl chloride to give the monoester exclusively. Subsequent deprotection of the amino group and deblocking of the monoester from polymer support by treatment with hydriodic acid (HI) gave the desired product. We earlier reported synthesis of a large number of diesters of curcumin, but selective esterification of one phenolic has been accomplished by this novel method, which can be used for preparing monoesters of any symmetric diphenol in quantitative yields.     

Preparation of Pt／C Catalyst with Solid Phase Reaction Method

The Pt/C catalyst was prepared with solid phase reaction method (Pt/C(S)) for the first time.Its Performances were compared with that prepared by the traditional liquid phase reaction method. The results demonstrate that the electrocatalytic activity of Pt/C catalyst with solid phase reaction method for methanol oxidation is higher than that with liquid phase reaction method. XRD and TEM measurements indicate that the Pt/C(S) possesses low crystalline extent and small particle size.     

N‐Linked Hydroxylamine Resin: Solid‐Phase Synthesis of Hydroxamic Acids

A novel hydroxylamine resin for solid‐phase synthesis of hydroxamic acids is described. Its facile application is illustrated by the solid‐phase synthesis of various hydroxamic acids. Cleavage is induced under acidic conditions by treatment with trifluoroacetic acid, providing hydroxamic acids in high purity and good yields.     

Iodine‐Catalyzed,One‐Pot,Solid‐Phase Synthesis of Benzothiazole Derivatives

Molecular iodine was utilized in a one‐pot, solid‐phase, solvent‐free reaction between 2‐aminothiophenol and benzoic acid derivatives to obtain highly economical and excellent yield of benzothiazole derivatives in comparison to polyphosphoric acid- and [pmIm]‐Br‐catalyzed microwave synthesis reactions. The results of the studies revealed that the new method reduces cost by approximately 17‐fold in comparison to polyphosphoric acid and has a significant cost reduction in comparison to [pmIm]‐Br. Moreover, it becomes even more economical because no additional chemicals and solvents are necessary for the reaction.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.     

Preparation of α-Fe2O3 Nanofiber via Electrospinning Process

A thin PVA/FeCl3 composite fiber was prepared by using sol-gel processing and electrospinning tech niques. A nanofiber of α-Fe2O3 with the diameter of 50-150 nm was obtained via high temperature calcina tion of the PVA/FeCl3 composite fiber. The material was characterized by infra-red(IR) spectroscopy, X-ray diffraction(XRD), and scanning electron microscopy(SEM). The results show that the fiber after the calci nation at 700 ℃ was a pure α-Fe2O3 nanofiber.     

Preparation of α-Fe2O3 Nanofiber via Electrospinning Process

A thin PVA/FeCl3 composite fiber was prepared by using sol-gel processing and electrospinning techniques. A nanofiber of α-Fe2O3 with the diameter of 50-150 nm was obtained via high temperature calcination of the PVA/FeCl3 composite fiber. The material was characterized by infra-red (IR) spectroscopy, X-ray diffraction(XRD), and scanning electron microscopy(SEM). The results show that the fiber after the calcination at 700℃ was a pure α-Fe2O3 nanofiber.     

Facile Solid‐Phase Synthesis of Aliphatic Aldehydes Using Novel Polymer‐Supported Phenylselenomethyltrimethylsilane

Treatment of a novel polymer‐supported phenylselenomethyltrimethylsilane reagent with LDA followed by alkylation and oxidative deselenation efficiently afforded aliphatic aldehydes in moderate to good yields with excellent purities.     

Study of Very Low Temperature Crystallization Process in Ethylene/α-Olefin Copolymers

Summary: The crystallization behavior of Ziegler-Natta (ZN) and single site (SS) based ethylene/1-butene and ethylene/1-hexene copolymers and SS copolymer fractionated by composition and molar mass (MM) has been studied by differential scanning calorimetry. It was observed that in addition to the high temperature crystallization peak (HTCP), and for ZN copolymers in addition also to low temperature crystallization peak (LTCP), a very-low temperature crystallization peak (VLTCP) is present at temperatures in between 60–75 °C. Peak temperature of VLTCP, T_VLTCP, decreases with increasing comonomer content (C_comon) at fixed MM. If C_comon is kept approximately constant, T_VLTCP increases with increasing MM. It turns out that T_VLTCP does not depend on the type of catalyst used. The degree of crystallinity calculated from the VLTCP is independent of the chemical nature of the comonomers present, but slightly changes with C_comon. It also steeply increases with MM and levels off at MM around 50 kg/mol. It was found that the crystallinity as related to the area of the VLTCP is catalyst type dependent, and is higher for the SS catalyst used compared to the ZN catalyst.     

Solid‐Phase Synthesis of a 1‐Thio‐β‐d‐GlcNAc Carbohydrate Mimetic Library

The solid phase synthesis of N‐acetyl‐2‐deoxy‐1‐thio‐β‐d‐glucopyranoside derivatives by reacting an immobilized sugar thiol with Michael acceptors and α‐chloroketones, followed by ketone reductions, reductive aminations, acylations and alkylations was developed to yield a library of 1088 compounds. Such carbohydrate mimetic libraries are synthesized efficiently on the solid phase without the need for protection of the sugar hydroxyl groups. The library was designed for the identification of potential inhibitors of β‐d‐GlcNAc binding proteins.     

Preparation of a New Polyoxometalate-based Nanoparticles

Polyoxometalates (POMs) α-K8H6[Si2W18Ti6O77] (Si2W18Ti6) loaded starch nanoparticles have been prepared and structurally characterized by elemental analyses, IR spectra and ^29Si spectroscopy. The particle size of Si2W18Ti6/starch was estimated by a Transmission electron microscope (TEM) and a 1000HSA MALVIRN Zetasizer instrttment. The result shows that the polyoxometalate retained the parent structure after encapsulated by starch microspheres.     

One‐Pot Preparation of Unsymmetrical Biaryls via Suzuki Cross‐Coupling Reaction of Aryl Halide using Phase‐Transfer Catalyst in a Biphasic Solvent System

A one‐pot synthetic method of unsymmetrical biaryls was developed via the Suzuki cross‐coupling reaction of aryl halide using a phase‐transfer catalyst in a biphasic solvent system.     

Solid‐Phase Synthesis of N‐Aryl‐N′‐Carboalkoxy Guanidines by the Mitsunobu Reaction of Fmoc‐Guanidines

Abstract

A new method for the solid‐phase synthesis of N‐aryl‐N′‐carboalkoxy guanidines is described. Aromatic amines were reacted with Fmoc‐isothiocyanate to provide Fmoc‐thioureas, which were coupled with Rink amide resin to provide the corresponding resin‐bound Fmoc‐guanidines. Subsequent Mitsunobu alkylation with a variety of alcohols delivered N‐aryl‐N′ carboalkoxy guanidines in good to high purity after resin cleavage.