Interaction between star-like block copolymer and sodium oleate in aqueous solutions

The interaction between a star-like block copolymer (AP432) and an anionic surfactant sodium oleate (C₁₇H₃₃COONa) was investigated in detail both at the air/water interface and in bulk aqueous solutions. The results of surface tension show that AP432 and C₁₇H₃₃COONa could form mixed micelles. The results obtained from the oscillating barrier measurements at low dilational frequencies (0.01-0.1 Hz) reveal that the maximum values of the dilational modulus for AP432/C₁₇H₃₃COONa mixed system moved to lower concentrations compared to those of single AP432 or C₁₇H₃₃COONa aqueous solutions. Steady-state fluorescence measurements indicate that after mixing, the I₁/I₃ values of AP432/C₁₇H₃₃COONa system above the cmc are higher than those of single AP432 or C₁₇H₃₃COONa solutions. This is probably due to a looser pack of the molecules within micelles for the AP432/C₁₇H₃₃COONa mixture, which is also consistent with the results obtained from TEM observations. For comparison, the interaction between a commercially available linear PEO-PPO-PEO copolymer (Pluronics L64) and C₁₇H₃₃COONa was also studied. All experimental results give clear evidence that the interaction between L64 and C₁₇H₃₃COONa is different from that between AP432 and C₁₇H₃₃COONa.     

Interfacial Dilational Properties of Hydrophobically Modified Partly Hydrolyzed Polyacrylamide and Anionic Surfactants at the Water-Decane Interface

The dilational viscoelastic properties of hydrophobically modified partly hydrolyzed polyacrylamide and anionic surfactants (4,5-diheptyl-2-propylbenzene sulfonate and gemini surfactant C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte have been investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. Experimental results show that at low surfactant concentration, the increase of the dilational modulus by the addition of surfactant molecules at low frequency might be explained by the mix-adsorption of the polymer chains and surfactant molecules. At the same time, polymer chain could sharply decrease the dilational modulus of surfactant film mainly due to the weakening of the strong interactions among long alkyl chains in surfactant molecules. At high surfactant concentration, the addition of surfactant molecules can decrease the dilational modulus of polymer solution due to the fast process involving in the exchange of surfactant molecules between the interface and the mixed complex formed by surfactant molecules and hydrophobic micro-domains. The added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally increases the frequency dependence of the interfacial dilational modulus. The data obtained on the relaxation processes via interfacial tension relaxation measurements can explain the results from oscillating barriers measurements very well.     

Aggregation behavior of star-like PEO-PPO-PEO block copolymer in aqueous solution

The aggregation behavior of a star-like amphiphilic block copolymer (denoted as AP432, which was synthesized via anionic polymerization), in aqueous solutions was investigated by surface tension, steady-state fluorescence, dynamic light scattering (DLS) and transmission electron microscopy (TEM). For comparison, a commercially available linear amphiphilic PEO-PPO-PEO block copolymer, Pluronics L64, which has a similar PEO fraction to AP432, was also studied. It is found that the different molecular structure of AP432 and L64 leads to a significant difference on their behavior both at the air/water interface and in bulk aqueous solutions. The results of surface tension measurements indicate that the surface activity of AP432 is much more pronounced than that of L64. The formation of AP432 and L64 aggregates are identified by DLS, fluorescence and TEM measurement.     

Effect of L64 on the Phase Behavior of 1-Dodecyl-3-methylimidazolium Chloride/Water System

Phase behavior of ternary system involving surfactant‐like ionic liquid 1‐dodecyl‐3‐methylimidazolium chloride ([C₁₂mim]Cl), water, and nonionic surfactant PEO‐PPO‐PEO block copolymer (Pluronic L64) is investigated at 25°C. Hexagonal (H₁) and lamellar liquid crystal phase (Lα) are found in [C₁₂mim]Cl/H₂O/L64 system by using polarized optical microscopy (POM), small‐angle X‐ray scattering (SAXS) techniques and ²H NMR spectra. The phase structure (H₁ phase), which is formed in [C₁₂mim]Cl/H₂O binary system, is not changed when L64 with a low concentration is added. However, phase transitions will occur from hexagonal to multiphases of H₁ and cubic phases (C), then to Lα+C phases with constant [C₁₂mim]Cl/H₂O ratio and increasing L64 concentration. Moreover, at given L64 (5%, 20%) concentration, the lattice parameter of H₁ or Lα phase decreases with increasing [C₁₂mim]Cl/H₂O ratio. Fourier transform infrared (FTIR) spectra indicate that the H‐bonded network comprising an imidazolium ring, chloride ion and water formed in [C₁₂mim]Cl/H₂O binary system is disrupted upon addition of L64. This is helpful to the phase transition, due to the decreasing of interfacial curvature induced by dehydration of hydrated layer after the addition of PEO block of L64.     

A Surface Rheological Study of Silwet L-77 Surfactant at the Air/Water Interface

The dilational viscoelastic properties of Silwet L-77, a trisiloxane surfactant of the general formula (Me₃SiO)₂SiMe(CH₂)₃(OCH₂CH₂)_7.5OH, at the air/water interface were investigated. Aqueous solutions of Silwet L-77 were spread onto a pendant drop and the dynamic surface tensions were measured by means of axisymmetric drop shape analysis. The surface dilatational elasticity, viscosity, and phase angle of the adsorption monolayer were also determined using the oscillating drop technique. The influences of frequency and concentration on the surface dilational properties were expounded. It is shown that the surface dilational modulus and elastic modulus increased with the increase of frequency, the viscous modulus was complex, while the phase angle decreased with the increase of frequency. Surface dilational modulus, elastic modulus, and viscous modulus passed through the maximum with the increase of bulk concentration and the phase angle increased with the increase of concentration.     

Effect of Alkyl Chain Length on the Interfacial Dilational Properties of Hydroxy-Substituted Alkyl Benzenesulfonates

Dilational rheological behaviors of adsorption layers of three surfactants, sodium 2-hydroxy-3,5-dioctyl benzene sulfonate (C₈C₈), sodium 2-hydroxy-3-octyl-5-decyl benzene sulfonate (C₈C₁₀), and sodium 2-hydroxy-3-octyl-5-dodecylbenzenesulfonate (C₈C₁₂) formed at air–water and decane–water interfaces, have been investigated as a function of concentration and frequency (0.002–0.1 Hz) by the oscillating bubble/drop method. The experimental results show that the dilational moduli of hydroxy-substituted alkyl benzenesulfonates are obviously higher than those of the common surfactants, because the interfacial interactions between alkyl chains are improved drastically by the unique arrangement of C₈C₈ molecules at the interface. However, the moduli at the decane–water interface are much lower than those at the surfaces because decane molecules will insert into the surfactant molecules adsorbed at the interface and destroy the interactions between alkyl chains. With an increase in the number of carbon atom of 5-alkyl, the surface dilational modulus decreases because the orientation of the surfactant molecules at the surface varies from parallel to tilt. On the other hand, the diffusion-exchange process dominates the interfacial behavior and the interfacial modulus improves with the increase in the length of the alkyl chain.     

Interfacial dilational properties of partly hydrolyzed polyacrylamide and gemini surfactant at the decane–water interface

The dilational viscoelastic properties of partly hydrolyzed polyacrylamide (HPAM) and surfactant (C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte were investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. The polymer plays different roles in influencing the structure of HPAM–surfactant mix-adsorbed layer at different surfactant concentration. At low surfactant concentration, the addition of polymer could sharply decrease the dilational elasticity mainly due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules, while the addition of the polymer may enhance the dilational elasticity due to the slow diffusivity of the polymer chains at higher surfactant concentration. And the added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally decreases the interfacial dilational elasticity and increases the dilational viscosity. The data obtained on the relaxation processes via interfacial tension relaxation measurement can explain the results from dilational viscoelasticity measurements very well.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Reversible control of self-assembly of a diblock copolymer supporting Wittig reagent

The reversible control of self-assembly of a diblock copolymer supporting Wittig reagent was attained by changing the volume ratio of the mixed solvent. Poly(4-vinylbenzyltriphenylphosphonium chloride)-block-polystyrene (PPCl-b-PSt) self-assembled into micelles with the PPCl block cores in C₆H₆. The micelles were completely dissociated into unimers by the addition of CH₃CN at a 5/5 volume ratio of C₆H₆/CH₃CN. As a result of further increasing the CH₃CN, the reversed micelles with the PPCl block shells were produced. The copolymer served as the Wittig reagent for 9-anthracenecarboxaldehyde to produce a block copolymer with the pendent anthracene. The resulting copolymer also provided micelles in C₆H₆.     

Preparation and study of hydrides of fullerenes C60 and C70

Fullerene hydrides were prepared by hydrogenation of fullerences C₆₀ and C₇₀ using proton transfer from 9,10-dihydroanthracene to fullerene and were studied by mass spectrometry (electron impact, field desorption), IR, UV, and¹H and¹³C NMR spectroscopy. The main product of the hydrogenation of C₆₀ is C₆₀H₃₆, which is sufficiently stable. Hydrogenation of fullerene C₇₀ gives a series of polyhydrides C₇₀H _n (n=36–46), and the main product is C₇₀H₃₆. The dehydrogenation of C₆₀H₃₆ by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone is not quantitative and results in the formation of fullerene derivatives along with C₆₀. The comparison of the IR and¹H and¹³C NMR spectral data for solid C₆₀H₃₆ with the theoretical calculations suggests that the fullerene hydride has aT-symmetric structure and contains four isolated benzenoid rings located at tetrahedral positions on the surface of the closed skeleton of the molecule. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 4, pp. 671–678, April, 1997.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

Syntheses,crystal structures,and magnetic properties of a series of Fe2Ln complexes

A family of phenoxo-bridged heterometallic Schiff base trinuclear complexes, [Fe₂LnL₂(C₃H₇COO)(H₂O)]·CH₃OH·CH₃CN·H₂O (Ln = Sm, 1; Gd, 2; Tb, 3; Dy, 4) is reported. Those complexes were afforded by “one-pot” reaction of a polydentate Schiff base ligand 2-hydroxy-3-methoxy-phenylsalicylaldimine (H₂L) with Fe(NO₃)₃·9H₂O, Ln(NO₃)₃·6H₂O and sodium butyrate (C₃H₇COONa) in a mixture of methanol and acetonitrile in the presence of triethylamine as a base. Single-crystal X-ray diffraction analysis reveals that the structures of the four complexes are isomorphic. In each complex, two anionic [FeL₂]^? units coordinate to the central lanthanide ion as a tetradentate ligand using its four phenoxo oxygens, forming a two-blade propeller-like molecular shape. Magnetic properties of 1–4 were investigated using variable temperature magnetic susceptibility, and weak ferromagnetic exchange between the Fe^III and Ln^III ions has been established for the Gd derivative. The Tb and Dy complexes show no evidence of slow relaxation behavior above 2.0 K.     

Dilational Viscoelasticity of the Zwitterionic Gemini Surfactants with Polyoxyethylene Spacers at the Interfaces

The dilational viscoelasticity of zwitterionic gemini surfactants C₈E_xNC₁₂ with polyoxyethylene spacers at the water-air and water-decane interfaces were investigated by oscillating barriers method. The experiments were carried out at different concentrations with an accessible frequency range of 0.005 to 0.1 Hz. Interfacial tension relaxation method was employed to obtain dilational parameters in a reasonably broad frequency range. Experimental results show that the values of dilational elasticity and viscosity of C₈E_xNC₁₂ are larger than those of common nonionic surfactants, such as T × 100, and the dilational viscoelasticity at the water-decane is close to that at the water-air interface on the whole_. The results may be attributed to Coulombic attraction, and the possible schematic diagrams of adsorbed molecules with different polyoxyethylene spacers at the water-air and water-decane interfaces are proposed. We also analyzed C₈E_xNC₁₂ from the results of relaxation experiments and Cole-Cole plots.     

Interfacial dilational properties of anionic gemini surfactants with polymethylene spacers

The dilational properties of anionic gemini surfactants alkanediyl-α,ω-bis(m-octylphenoxy sulfonate) (C₈C_mC₈) with polymethylene spacers at the water–air and water–decane interfaces were investigated by oscillating barriers and interfacial tension relaxation methods. The influences of oscillating frequency and bulk concentration on the dilational properties were explored. The experimental results show that the linking spacer plays an important role in the interfacial dilational properties. The moduli pass through one maximum for all three gemini surfactants at both water–air and water–decane interfaces. However, the values of moduli at the water–air interface are obviously higher than those at the water–decane interface because the sublayer formed by spacer chains will be destroyed by the insertion of oil molecules. Moreover, with the increase of spacer length, the surface adsorption film becomes more viscous at high concentration, which can be attributed to the process involving the formation of the sublayer. On the other hand, the spacers of the adsorbed C₈C₆C₈ molecules will extend into the oil phase when the interface is compressed. As a result, the interfacial film becomes more elastic with the increase of spacer length at high concentration. The experimental results obtained by the interfacial tension relaxation measurements are in accord with those obtained by the oscillating barriers method.     

Facilitated Transport of C<Subscript>2</Subscript>H<Subscript>4</Subscript> in a SiO<Subscript>2</Subscript>-poly(N-vinylpyrrolidone)-Ag<Superscript>+</Superscript> Inorganic-Organic Hybrid Membrane

Inorganic-organic hybrid membranes containing silica as the structure matrix, poly(N-vinylpyrrolidone) (PVP) as the organic mediating agent and silver ions as olefinic carriers were prepared using sol–gel method and dip-coating process. The structure and permeances of the membranes for N₂, He, C₂H₄, C₂H₆ at different temperatures indicated that defect-free membranes were obtained and the transportation of the C₂H₄ through the membranes followed the dissolution and diffusion mechanism. Ideal separation factors of C₂H₄/C₂H₆ through the membranes were evaluated at the temperature of 298, 373 and 423 K respectively using mixture gas of 50% C₂H₄-50% C₂H₆. The results showed that the ideal separation factors of C₂H₄/C₂H₆ through the membranes were obviously greater than the ratio of PC₂H₄/PC₂H₆ obtained from the single gas measurement due to the hindering effect by the adsorbed C₂H₄. The ideal separation factors of C₂H₄/C₂H₆ increased with temperature and reached 10 at 423 K, which suggested that C₂H₄ and C₂H₆ could be separated at lower humidity compared to the reported organic polymer/silver salt membranes in which humidified gases and higher silver loading were usually used. The transport of C₂H₄ in the inorganic-organic hybrid membrane was proposed to follow the hopping mechanism, that is, olefins moved across the fixed silver sites.     

界面张力弛豫法研究不同结构破乳剂油水界面扩张粘弹性

采用界面张力弛豫法研究了支链破乳剂AE121和直链破乳剂SP169在正癸烷-水界面上的扩张粘弹性质，并与小幅周期振荡法获得的结果进行了比较.阐述了两种破乳剂的扩张模量随扩张频率和破乳剂浓度的变化规律.研究发现，在低频率处，两种破乳剂的扩张模量均接近于零；在中间频率范围内，扩张模量随扩张频率的增加而增大；在高频率处，扩张模量的幅度接近于极限扩张弹性.在中间频率范围内，扩张模量随破乳剂浓度增大，在接近临界胶束浓度处出现一个极大值；同时还发现，界面上和界面附近的微观弛豫过程的数目随破乳剂浓度增加而增大，其贡献也呈规律性变化.     

Equilibrium phase behavior of aqueous two-phase systems containing 17R4/L64 and citrates

The cloud points (CPs) of the copolymers 17R4 and L64 were first measured, and then the effects of salts ((NH₄)₃C₆H₅O₇, K₃C₆H₅O₇) on 17R4 and L64 were researched. After finishing the work described above, the temperature (278.15, 283.15, and 288.15) K of aqueous two-phase systems was determined, which consist of 17R4-(NH₄)₃C₆H₅O₇, 17R4-K₃C₆H₅O₇, L64-(NH₄)₃C₆H₅O₇, and L64-K₃C₆H₅O₇. Finally, the liquid–liquid equilibrium (LLE) data of binodal curve and the tie line for 17R4-(NH₄)₃C₆H₅O₇ aqueous two- phase systems (ATPSs) 17R4-K₃C₆H₅O₇ ATPSs, L64-(NH₄)₃C₆H₅O₇ ATPSs, and L64-K₃C₆H₅O₇ ATPSs were obtained. Nonlinear fitting of the empirical equation was used for making the diagram. The results showed that the change in the size of the two-phase areas increases with the increase of temperature. The capacity of the salts to induce phase segregation follows the Hofmeister series, that is, K₃C₆H₅O₇?>?(NH₄)₃C₆H₅O₇. In addition, the findings also showed that the phase separation ability of 17R4 is better than that of L64.     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

Dilational Rheological Properties of P-(n-alkyl)-benzyl Polyoxyethylene Ether Carboxybetaine at Water–Decane Interface

The dilational rheological behaviors of absorbed films of p-(n-alkyl)-benzyl polyoxyethylene ether carboxybetaine C_xBE₂CB (x = 8, 10, 12) at the water–decane interface have been investigated by the drop-shape analysis method. The influences of time, oscillation frequency, and bulk concentration on dilational modulus and phase angle have been expounded. The experimental results show that the phase angle of C_xBE₂CB (x = 10, 12) decreases with the increase of time, the slope of the log ? ? log ω curve and phase angle of C_xBE₂CB (x = 10, 12) decrease in a wide concentration range. These phenomena become more and more apparent with the increase of hydrocarbon chain length and it cannot be attributed to the diffusion-exchange process between the bulk and the interface. It is reasonable to consider that ethylene oxide groups are flexible and can be compressed and expanded, just like a spring. Therefore, the compression and expansion of the ethylene oxide groups in the interfacial layer and the exchange between interface and sublayer play a more important role for C_xBE₂CB (x = 10, 12) adsorption film. The dependence of dilational modulus on interfacial pressure can support our provided mechanism strongly.     

Effect of Glyphosate Isopropylamine on the Surface Tension and Surface Dilational Rheology Properties of Polyoxyethylene Tallow Amine Surfactant

In order to develop the substitutes for polyoxyethylene tallow amine (POEA), the understanding the interaction of glyphosate isopropylamine and POEA is essential. The surface behaviors of POEA and POEA in the presence of 1 wt% glyphosate isopropylamine have been investigated at the air-water interface by the drop shape analysis method. The influences of surface tension, dilational frequency, and bulk concentration on the surface properties were expounded. The experiment results show that the adsorption films of POEA behave elastic in nature at low bulk concentration. With increasing in bulk concentration, the dilational modulus, dilational elasticity, and dilational viscosity pass through a maximum value, the phase angle increase monotonically. These phenomena can be attributed to the diffusion-exchange process between the bulk and the interface. The addition of 1 wt% glyphosate isopropylamine significantly influences on the POEA surface tension and dilational properties. The dilational modulus, dilational elasticity, and dilational viscosity obvious decrease in general, and the values of phase angle significant change after the addition of 1 wt% glyphosate isopropylamine. Glyphosate isopropylamine and POEA form a new complex in the solution and the surface activity and surface dilational properties of complex is different from POEA.