On the mechanism of surfactant adsorption on solid surfaces: free-energy investigations

The adsorption free-energy of surfactant on solid surfaces has been calculated by molecular dynamics (MD) simulation for a model surfactant/solvent system. The umbrella-sampling with the weight histogram analysis method (WHAM) was applied. The entropic and enthalpic contributions to the full potential of mean force (PMF) were obtained to evaluate the detailed thermodynamics of surfactant adsorption in solid/liquid interfaces. Although we observed that this surfactant adsorption process is driven mainly by a favorable enthalpy change, a highly unfavorable entropic contribution still existed. By decomposing the free energy (including its entropic and enthalpic components) into the solvent-induced contribution and the surfactant-wall term, the effect of surface and solvent on the adsorption free-energy has been distinguished. The contribution to the PMF from the surface effect is thermodynamically favorable, whereas the solvent term displays an obviously unfavorable component with a monotonic increase as the surfactant approaches to the surface. The impact of various interactions from the surfaces (both solvent-philic and solvent-phobic) and the solvent on the adsorption PMF of surfactant has been compared and discussed. Compared to the solvent-philic surface, the solvent-phobic surface generates more stable site for the surfactant adsorption. However, the full PMF profile for the solvent-phobic system shows a clear positive maximum value at the bulk-interface transition region, which leads to a considerable long-range free-energy barrier to the surfactant adsorption. These results have been analyzed in terms of the local interfacial structures. In summary, this comprehensive study is expected to reveal the microscopic interaction mechanisms determining the surfactant adsorption on solid surfaces.     

Self-aggregation of cationic surfactants onto oxidized cellulose fibers and coadsorption of organic compounds

In this work, the adsorption of cationic surfactant and organic solutes on oxidized cellulose fibers bearing different amounts of carboxylic moieties was investigated. The increase in the amount of -COOH groups on cellulose fibers by TEMPO oxidation induced a general rise in surfactant adsorption. For all tested conditions, that is, cellulose oxidation level and surfactant alkyl chain length (C12 and C16), adsorption isotherms displayed a typical three-region shape with inversion of the substrate zeta-potential which was interpreted as reflecting surfactant adsorption and aggregation (admicelles and hemimicelles) on cellulose fibers. The addition of organic solutes in surfactant/cellulose systems induced a decrease in surfactant cac on the cellulose surface thus favoring surfactant aggregation and the formation of mixed surfactant/solute assemblies. Adsorption isotherms of organic solutes on cellulose in surfactant/cellulose/solute systems showed that solute adsorption is strictly correlated to (i) the surfactant concentration, solute adsorption increases up to the surfactant cmc, where solute partitioning between the cellulose surface and free micelles causes a drop in adsorption, and to (ii) solute solubility and functional groups. The specific shape of solutes adsorption isotherms at a fixed surfactant concentration was interpreted using a Frumkin adsorption isotherm, thus suggesting that solute uptake on cellulose fibers is a coadsorption and not a partitioning process. Results presented in this study were compared with those obtained in a previous work investigating solute adsorption in anionic surfactant/cationized cellulose systems to better understand the role of surfactant/solute interactions in the coadsorption process.     

A review on experimental studies of surfactant adsorption at the hydrophilic solid-water interface

The progresses of understanding of the surfactant adsorption at the hydrophilic solid-liquid interface from extensive experimental studies are reviewed here. In this respect the kinetic and equilibrium studies involves anionic, cationic, non-ionic and mixed surfactants at the solid surface from the solution. Kinetics and equilibrium adsorption of surfactants at the solid-liquid interface depend on the nature of surfactants and the nature of the solid surface. Studies have been reported on adsorption kinetics at the solid-liquid interface primarily on the adsorption of non-ionic surfactant on silica and limited studies on cationic surfactant on silica and anionic surfactant on cotton and cellulose. The typical isotherm of surfactants in general, can be subdivided into four regions. Four-regime isotherm was mainly observed for adsorption of ionic surfactant on oppositely charged solid surface and adsorption of non-ionic surfactant on silica surface. Region IV of the adsorption isotherm is commonly a plateau region above the CMC, it may also show a maximum above the CMC. Isotherms of four different regions are discussed in detail. Influences of different parameters such as molecular structure, temperature, salt concentration that are very important in surfactant adsorption are reviewed here. Atomic force microscopy study of different surfactants show the self-assembly and mechanism of adsorption at the solid-liquid interface. Adsorption behaviour and mechanism of different mixed surfactant systems such as anionic-cationic, anionic-non-ionic and cationic-non-ionic are reviewed. Mixture of surface-active materials can show synergistic interactions, which can be manifested as enhanced surface activity, spreading, foaming, detergency and many other phenomena.     

Dynamic surface tension of polyelectrolyte/surfactant systems with opposite charges: two states for the surfactant at the interface

The molecular reorientation model of Fainerman et al. is conceptually adapted to explain the dynamic surface tension behavior in polyelectrolyte/surfactant systems with opposite charges. The equilibrium surface tension curves and the adsorption dynamics may be explained by assuming that there are two different states for surfactant molecules at the interface. One of these states corresponds to the adsorption of the surfactant as monomers, and the other to the formation of a mixed complex at the surface. The model also explains the plateaus that appear in the dynamic surface tension curves and gives a picture of the adsorption process.     

Surfactant adsorption onto cellulose surfaces

The adsorption of the cationic surfactant, hexadecyl trimethyl ammonium bromide, C16TAB, onto model cellulose surfaces, prepared by Langmuir-Blodgett deposition as thin films, has been investigated by neutron reflectivity. Comparison between the adsorption of C16TAB onto hydrophilic silica, a hydrophobic cellulose surface, and a regenerated (hydrophilic) cellulose surface is made. Adsorption onto the hydrophilic silica and onto the hydrophilic cellulose surfaces is similar, and is in the form of surface aggregates. In contrast, the adsorption onto the hydrophobic cellulose surface is lower and in the form of a monolayer. The impact of the surfactant adsorption and the in situ surface regeneration on the structure of the cellulose thin films and the nature of solvent penetration into the cellulose films are also investigated. For the hydrophobic cellulose surface, intermixing between the cellulose and surfactant occurs, whereas there is little penetration of surfactant into the hydrophilic cellulose surface. Measurements show that solvent exchange between the partially hydrated cellulose film and the solution is slow on the time scale of the measurements.     

Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide

This article describes the adsorption of sodium dodecyl benzene sulfonate, an anionic surfactant, on a hematite surface and that when the surface is preadsorbed with polyacrylamide. The adsorption of surfactant on a hematite surface has been studied through equilibration and during kinetics measurements at three pH levels, viz. 4.0, 7.0, 8.9. The surfactant adsorbs strongly on the hematite surface. The adsorption density at equilibrium as well as the rate of adsorption are dependent on the suspension pH. The maximum adsorption density has been observed at pH 4, which reflects strong adsorption of negatively charged sulfonate ions on the oppositely charged Fe₂O₃ surface (point of zero charge, 6.4). The adsorption density reaches its equilibrium value sooner in the case of an alkaline suspension and later in the case of acidic pH. The polymer surfactant interaction has been noticed in the present study and is also a function of pH. The hematite mineral when preadsorbed with the polymer draws fewer of the surfactant molecules at lower surface coverage (during the initial period of the kinetics measurement) irrespective of the pH. When the adsorption of the surfactant reaches a value which is near the equilibrium one, the pH effect is evident. In the case of acidic pH, the surfactant adsorbs more on the hematite surface when preadsorbed with the polymer compared to the bare surface. In the case of neutral or alkaline pH, however, the density of surfactant adsorption remains lower throughout the kinetics measurement when the surface is preadsorbed with the flocculant compared to the bare surface. The particles also remain flocculated till the end of the experiment, whereas at pH 4 the particles are deflocculated. In addition to pH, the electrostatic nature of the adsorbent and the presence of anionic surfactant have an influence on the flocculation–deflocculation phenomena. The polymer–surfactant interaction has been schematically represented. The surfactant is bound with polymeric chains as a combination of its monomeric form as well as in the form of association in the case of acidic media and in competition with polymer in the case of alkaline media. Received: 18 April 2000/Accepted: 2 August 2000     

The impact of electrolyte on the adsorption of sodium dodecyl sulfate/polyethyleneimine complexes at the air-solution interface

The addition of electrolyte (0.1 M NaCl) is shown to have a significant impact upon the surfactant concentration and solution pH dependence of the adsorption of sodium dodecyl sulfate (SDS)/polyethyleneimine (PEI) complexes at the air-solution interface. Substantial adsorption is observed over a wide surfactant concentration range (from 10(-6) to 10(-)2 M), and over much of that range of concentrations the adsorption is characterized by the formation of surface multilayers. The surface multilayer formation is most pronounced at high pH and for PEI with a lower molecular weight of 2K, compared to the higher molecular weight of 25K. These results, obtained from a combination of neutron reflectivity and surface tension, highlight the substantial enhancement in surfactant adsorption achieved by the addition of a combination of the polyelectrolyte, PEI, and a simple electrolyte. Furthermore the effect of electrolyte on the pH dependence of the adsorption further highlights the importance of the hydrophobic interaction in surface surfactant/polyelectrolyte complex formation.     

Adsorption and self-assembly of surfactant/supercritical CO2 systems in confined pores: a molecular dynamics simulation

A coarse-grained molecular dynamics simulation has been carried out to study the adsorption and self-organization for a model surfactant/supercritical CO2 system confined in the slit-shape nanopores with amorphous silica-like surfaces. The solid surfaces were designed to be CO2-philic and CO2-phobic, respectively. For the CO2-philic surface, obviously surface adsorption is observed for the surfactant molecules. The various energy profiles were used to monitor the lengthy dynamics process of the adsorption and self-assembly for surfactant micelles or monomers in the confined spaces. The equilibrium properties, including the morphologies and micelle-size distributions of absorbed surfactants, were evaluated based on the equilibrium trajectory data. The interaction between the surfactant and the surface produces an obvious effect on the dynamics rate of surfactant adsorption and aggregation, as well as the final self-assembly equilibrium structures of the adsorbed surfactants. However, for the CO2-phobic surfaces, there are scarcely adsorption layers of surfactant molecules, meaning that the CO2-phobic surface repels the surfactant molecules. It seems to conclude that the CO2 solvent depletion near the interfaces determines the surface repellence to the surfactant molecules. The effect of the CO2-phobic surface confinement on the surfactant micelle structure in the supercritical CO2 has also been discussed. In summary, this study on the microscopic behaviors of surfactant/Sc-CO2 in confined pores will help to shed light on the surfactant self-assembly from the Sc-CO2 fluid phase onto solid surfaces and nanoporous media.     

Monitoring surfactant-induced hemolysis by surface tension measurement

Surface tension measurements were employed to monitor the erythrocyte hemolysis process induced by surfactants. Two types of surfactants were used: the cationic surfactant DTAB and the anionic surfactant SDS. During DTAB-induced hemolysis, the changes in surface tension clearly demonstrate three stages. The first stage is characterized by surface tension increase, which is explained by surfactant removal from the suspending solution, due to adsorption onto cell membranes. In the second stage, surface tension remains constant, implying that equilibrium is attained between the membrane-bound surfactant and the surfactant in solution. The third stage is characterized by surface tension decrease that begins simultaneously with measurable cell-interior release, and lasts until hemolysis is completed. With SDS-induced hemolysis, the same three stages are observed at a low concentration; however, fluctuational increase in surface tension is obtained for higher concentrations. The latter is explained by additional adsorption of surfactant to solubilized membrane fragments.     

pH dependence of adsorption of n-dodecyl-beta-D-maltoside on solids

Adsorption of surfactants on solids plays an important role in industrial operations such as separation, lubrication, flotation, dispersion, chemical mechanical polishing, and enhanced oil recovery. In this work, adsorption of a typical biodegradable nonionic surfactant, n-dodecyl-beta-d-maltoside, on solids was studied to explore its potential applications. Even though it is a nonionic surfactant, significant pH-dependence was revealed for the adsorption on alumina in the range from pH 4 to 7. The adsorption density was found to be proportional to the concentration of surface AlOH group among Al(OH(2))(+) and AlO(-) groups. The equilibriums among the surface species are governed by pH through surface ionization reactions. The surface AlOH group evidently determines the formation of hydrogen bonding between the surfactant molecules and the solid surface and thus the adsorption. Similar correlation was also found in the case of hematite. The results help to understand the mechanism of adsorption of sugar-based surfactant on solids.     

Surface complexation of DNA with a cationic surfactant

We have studied the surface complexation of DNA with a cationic surfactant (DTAB) using a combination of methods: dynamic surface tension, ellipsometry and Brewster angle microscopy. Below the surfactant critical aggregation concentration (cac), complexation occurs only at the surface, and the results are consistent with neutralization of the surfactant charges by the free polymer ions. Above the cac, surfactant starts to bind cooperatively to DNA in the bulk, and adsorption of the preformed hydrophobic surfactant DNA aggregate is now possible, leading to thick surface layers. At still higher concentrations of surfactant (still below saturation of binding in the bulk), there is decrease in adsorption due to competition with bulk aggregates. Finally, as surfactant concentration is increased still further, bulk aggregates become less soluble and large amounts are adsorbed, forming a surface layer, which is solid-like and brittle.     

The adsorption of alkylpyridinium chlorides and their effect on the interfacial behavior of quartz

This research was directed at understanding cationic surfactant adsorption phenomena on wet-ground natural quartz, mainly with dodecylpyridinium chloride as the model surfactant. How these surfactant ions adsorb at the interface was delineated through measurements of adsorption isotherms, zeta potentials, suspension stability, contact angles, induction times, and flotation response. Hydrocarbon chain association of adsorbed surfactant ions (or self-association) leads to four distinct adsorption regions as the concentration of surfactant is increased in solution. The same four regions manifest themselves in the behavior of all of the interfacial processes studied. At low concentrations, adsorption is controlled primarily by electrostatic interactions, but when the adsorbed surfactant ions begin to associate into hemimicelles at the surface, hydrophobic chain interactions control the adsorption process. The results of experiments with alkylpyridinium chlorides of 12, 14 and 16 carbon atoms can be normalized in terms of their CMCs, which clearly show that surface aggregation phenomena are driven by the same hydrophobic interactions that lead to micelle formation in bulk solution.     

Modeling of the adsorption kinetics of surfactants at the liquid-fluid interface of a pendant drop

This paper presents a theoretical model for simulating the adsorption kinetics of a surfactant at the liquid-fluid interface of a pendant drop. The diffusion equation is solved numerically by applying the semidiscrete Galerkin finite element method to obtain the time-dependent surfactant concentration distributions inside the pendant drop and inside the syringe needle that is used to form the pendant drop. With the obtained bulk surfactant concentration distributions, the adsorption at the interface is determined by using the conservation law of mass. It should be noted that the theoretical model developed in this study considers the actual geometry of the pendant drop, the depletion process of the surfactant inside the pendant drop, and the mass transfer of the surfactant from the syringe needle to the pendant drop. The present pendant-drop model is applied to study the adsorption kinetics of surfactant C10E8 (octaethylene glycol mono n-decyl ether) at the water-air interface of a pendant drop. The numerical results show that the Ward and Tordai equation, which was derived for adsorption from a semi-infinite surfactant solution to a planar interface, is unsuitable for interpreting the dynamic surface or interfacial tension data measured by using the pendant-drop-shape techniques, especially at low initial surfactant concentrations. The spherical-drop model, which assumes the pendant drop to be a perfectly spherical drop with the same drop volume, can be used to interpret the dynamic surface or interfacial tension data for pendant drops either with high initial surfactant concentrations or with low initial surfactant concentrations in short adsorption durations only. For pendant drops with low initial surfactant concentrations in long adsorption durations, the theoretical model developed in this study is strongly recommended.     

Adsorption Behavior of Lysozyme and Tween 80 at Hydrophilic and Hydrophobic Silica–Water Interfaces

Nonionic surfactants such as Tween 80 are used commercially to minimize protein loss through adsorption and aggregation and preserve native structure and activity. However, the specific mechanisms underlying Tween action in this context are not well understood. Here, we describe the interaction of the well-characterized, globular protein lysozyme with Tween 80 at solid–water interfaces. Hydrophilic and silanized, hydrophobic silica surfaces were used as substrates for protein and surfactant adsorption, which was monitored in situ, with ellipsometry. The method of lysozyme and Tween introduction to the surfaces was varied in order to identify the separate roles of protein, surfactant, and the protein–surfactant complex in the observed interfacial behavior. At the hydrophobic surface, the presence of Tween in the protein solution resulted in a reduction in amount of protein adsorbed, while lysozyme adsorption at the hydrophilic surface was entirely unaffected by the presence of Tween. In addition, while a Tween pre-coat prevented lysozyme adsorption on the hydrophobic surface, such a pre-coat was completely ineffective in reducing adsorption on the hydrophilic surface. These observations were attributed to surface-dependent differences in Tween binding strength and emphasize the importance of the direct interaction between surfactant and solid surface relative to surfactant–protein association in solution in the modulation of protein adsorption by Tween 80.     

Adsorption of nonionic surfactants on cellulose surfaces: adsorbed amounts and kinetics

Kinetic and equilibrium aspects of three different poly(ethylene oxide) alkylethers (C12E5, C12E7, C14E7) near a flat cellulose surface are studied. The equilibrium adsorption isotherms look very similar for these surfactants, each showing three different regions with increasing surfactant concentration. At low surfactant content both the headgroup and the tail contribute to the adsorption. At higher surface concentrations, lateral attraction becomes prominent and leads to the formation of aggregates on the surface. The general shape of the isotherms and the magnitude of the adsorption resemble mostly those for hydrophilic surfaces, but both the ethylene oxide and the aliphatic segments determine affinity for the surface. The adsorption and desorption kinetics are strongly dependent on surfactant composition. At bulk concentrations below the CMC, the initial adsorption rate is attachment-controlled. Above the CMC, the micellar diffusion coefficient and the micellar dissociation rate play a crucial role. For the most hydrophilic surfactant, C12E7, both parameters are relatively large. In this case, the initial adsorption rate increases with increasing surfactant concentration, also above the CMC. For C12E5 and C14E7 there is no micellar contribution to the initial adsorption rate. The initial desorption kinetics are governed by monomer detachment from the surface aggregates. The desorption rate constants scale with the CMC, indicating an analogy between the surface aggregates and those formed in solution.     

Adsorption of Cationic Surfactants on Silica Surface: 1. Adsorption Isotherms and Surface Charge

Adsorption isotherms of cationic surfactant, dodecylpyridinium chloride, on an Aerosil OX50 and isotherms of surface charge against the background of 0.001- and 0.1-M KCl solutions at pH 7 and 9 were measured and analyzed. Different forms of adsorption isotherms of surfactants at low and high electrolyte concentrations are explained from differences in the formation of the surface charge of Aerosil. Comparison of the isotherms of surfactant adsorption and surface charge allowed us to make conclusions about the surfactant orientation and structure of an adsorption layer, as well as to determine the fraction of surfactant molecules in the first and second adsorption layers.     

Adsolubilization of toluene and acetophenone as a function of surfactant adsorption

Adsolubilization, solubilization of organic compounds into adsorbed surfactant aggregates, has attracted much attention in the past few years. It is being explored for a variety of new commercial applications including the formation of engineered surfaces, pharmaceutical applications, and nanotechnology. Adsolubilization is strongly influenced by the amount of adsorbed surfactant, which in turn depends upon pH, ionic strength, and surfactant type and concentration. In this study, the adsorption of a cationic surfactant, cetyltrimethylammonium bromide (CTAB) on precipitated silica and the adsolubilization of organic solutes (toluene and acetophenone) into the adsorbed surfactant aggregates were examined as a function of surfactant adsorption at two pH values (5 and 8). Three levels of surfactant adsorption, corresponding to equilibrium concentration low in region II, high in region II, and low in region III of the adsorption isotherm, and the adsolubilization of toluene and acetophenone were investigated both in single- and mixed-solute systems. The results showed that the adsorption of CTAB depended strongly on pH and for each pH the adsolubilization increased with increasing surface adsorption. However, the adsolubilization behaviors of the adsorbed CTAB aggregates in different adsorption regions were quite distinct, suggesting that the structural arrangement of the surfactant aggregates may play an important part in addition to the amount of adsorbed surfactant. This phenomenon was more noticeable at low surfactant adsorption than at higher surface adsorption. In mixed-solute systems, the presence of acetophenone had little effect on the toluene adsolubilization. In contrast, a synergetic effect was observed in the adsolubilization of acetophenone in the presence of toluene.     

Drop profile analysis tensiometry with drop bulk exchange to study the sequential and simultaneous adsorption of a mixed β-casein /C12DMPO system

The formation of mixed protein/surfactant adsorption layers is studied by the drop profile analysis tensiometry equipped with a special tool for drop volume exchange during experiments. This arrangement allows investigating in the traditional way by simultaneous adsorption from a mixed solution and also by a subsequent adsorption of the protein followed by surfactant. The experiments are performed for β-casein as the protein in the presence of different amounts of the non-ionic surfactant C₁₂DMPO. The surface layers formed via the two routes show similar equilibrium surface properties. However, the dynamics of desorption of the protein complexes into the pure buffer solution deviate significantly, which is explained by the different locations of the protein/surfactant interaction. Although in both cases the complex formation is based on hydrophobic interaction, the accessibility of the hydrophobic parts of pre-adsorbed proteins due to unfolding is more favourable by the surfactant than in the solution bulk. Therefore, the amount desorbed from surface layers formed from mixed solutions is significantly less as compared to the displacement of proteins by subsequently injected surfactants interacting at the surface.     

Interplay between the surface adsorption and solution-phase behavior in dialkyl chain cationic-nonionic surfactant mixtures

Neutron reflectivity, NR, and surface tension have been used to study the adsorption at the air-solution interface of mixtures of the dialkyl chain cationic surfactant dihexadecyl dimethyl ammonium bromide (DHDAB) and the nonionic surfactants monododecyl triethylene glycol (C12E3), monododecyl hexaethylene glycol (C12E6), and monododecyl dodecaethylene glycol (C12E12). The adsorption behavior of the surfactant mixtures with solution composition shows a marked departure from ideal mixing that is not consistent with current theories of nonideal mixing. For all three binary surfactant mixtures there is a critical composition below which the surface is totally dominated by the cationic surfactant. The onset of nonionic surfactant adsorption (expressed as a mole fraction of the nonionic surfactant) increases in composition as the ethylene oxide chain length of the nonionic cosurfactant increases from E3 to E12. Furthermore, the variation in the adsorption is strongly correlated with the variation in the phase behavior of the solution that is in equilibrium with the surface. The adsorbed amounts of DHDAB and the nonionic cosurfactants have been used to estimate the monomer concentration that is in equilibrium with the surface and are shown to be in reasonable qualitative agreement with the variation in the mixed critical aggregation concentration (cac).     

Effect of pH on the interfacial adsorption activity of pulmonary surfactant

The effect of pH on the interfacial adsorption activity of pulmonary surfactant was examined. Measurements of the surface tension were made in a Wilhelmy-like surface microbalance specially designed to assay small volumes of hypophase in thermostatically controlled conditions. Alkaline pH caused a significant decrease of the surface activity of both pulmonary surfactant and a lipid extract from surfactant (LES) (containing all of the lipids and surfactant protein-B (SP-B) and surfactant protein-C (SP-C) hydrophobic surfactant proteins, but lacking surfactant protein-A). The pK calculated from the change of surface activity versus pH was 9.18±0.26 and 9.27±0.31 for pulmonary surfactant and LES, respectively. The results from this study support the idea that electrostatic interactions between basic residues of SP-B and SP-C and negatively charged surfactant phospholipids could be important for the interfacial adsorption activity of pulmonary surfactant.