Mixed Micellization Behavior of 12-2-12 Gemini Surfactant with Some Alkyltrimetyl Ammonium Bromide Surfactants

Mixed micellization behavior of dimeric cationic surfactant ethanediyl-1,2-bis (dimethyldodecylammonium bromide) (12-2-12) with a series of monomeric cationic surfactants dodecyltrimethyl ammonium bromide (DTAB), tetradecyltrimethyl ammonium bromide (TTAB), and cetyltrimethyl ammonium bromide (CTAB) has been studied in aqueous and aqueous polyvinylpyrrolidone (PVP) solutions at 298.15, 308.15, and 318.15 K, respectively, using conductometric method. Various thermodynamic parameters like mixed micelle concentration (C_m), micelle mole fraction (X₁), interaction parameter (β), and free energy of mixing (ΔG_ex) of the mixed systems have been determined and analyzed using Rubingh's regular solution theory. The results indicate that in aqueous solutions the binary mixtures of 12-2-12 with DTAB/TTAB behave nonideally with mutual synergism whereas that with CTAB shows almost ideal behavior at 298.15 K. At 318.15 K, all these binary mixtures exhibit antagonistic behavior. The effect of variation in chain length of alkyltrimethyl ammonium bromide surfactants on the interactions with 12-2-12 have also been evaluated and discussed.     

Structural Behavior of Aggregate Assemblies of Cationic Surfactants and Their Mixtures with Triblock Polymers

Small angle neutron scattering (SANS) technique has been employed to study the structural aspects of micellar system of cationic surfactants viz. alkyltriphenylphosphonium bromide (C₁₂-, C₁₄-, C₁₆TPB) and hexadecylpyridinium chloride (C₁₆PyCl) with triblock polymers (L64, F68, and F127). SANS data analysis reveals the prolate ellipsoidal shape of mixed micelles and increase in the micellar size upon addition of triblock polymers (L64, F68, and F127). The influence of effective size of the head group segment on the growth of micelles of HTPB (larger head group) has also been compared with that of HPyCl (smaller head group). A proportionate micellar growth of cationic surfactants has been found with increase in the length of tail segment of cationic surfactants. The observed mixed micellar growth in mixed systems is also accounted on the basis of simultaneous increase in the hydrophobicity of both the components in the mixed system. Results from the present study enlightened the effect of variation in head group segment and hydrophobicity on the structural aspects of mixed micellar system.     

季铵盐型Gemini表面活性剂的胶束化动力学研究

采用停流法并结合Aniannson-Wall理论, 研究了联接基为(CH2)2, (CH2)3, (CH2)4和(CH2)6的季铵盐型Gemini表面活性剂胶束的形成-破坏过程. 动力学的研究结果表明, 胶束形成-破坏过程的弛豫时间(τ2)与联接基的长度、表面活性剂的浓度、反离子的浓度以及温度有关. 随联接基长度的增加, 季铵盐型Gemini表面活性剂胶束形成-破坏过程的弛豫时间缩短. 当温度高于293 K时, 随着反离子浓度的增加, 1/τ2将出现一个最低值. 根据核化焓结果提出了不同的联接基长度的季铵盐型Gemini表面活性剂具有不同的胶束形成-破坏过程的机理.     

支链醇对Gemini表面活性剂表面活性和胶束化行为的影响

Gemini表面活性剂是一类高效的新型表面活性剂,而醇是工业界和日化领域最常采用的表面活性剂助剂,因此研究不同结构的醇对Gemini表面活性剂表面活性和胶束化行为的影响规律和机理对于促进Gemini表面活性剂的发展和实际应用具有重要意义.利用表面张力、电导、等温滴定微量热,低温透射电镜和核磁共振研究了直链醇1-戊醇和具有相同主链的支链醇2-己醇与3-庚醇对具有不同长度连接基团阳离子季铵盐型Gemini表面活性剂C₁₂C_SC₁₂Br₂ （S=2,4,6,8,10,12）的表面活性和胶束化行为的影响,结果发现,支链醇能够显著影响表面活性剂在气/液界面的排布,使得C₂₀ （使溶剂的表面张力降低20 mN/m所需的表面活性剂浓度）和γ_CMC （CMC时表面张力值）随醇支化度的增加而显著降低,而支链醇对表面活性剂在溶液中的临界胶束浓度以及胶束的尺寸和形貌均没有明显影响,同时这些醇对Gemini表面活性剂的影响与连接基团的长度相关.阐述了上述结果产生的机理,将有助于指导如何选择合适结构的醇助剂去调控Gemini表面活性剂的表面和溶液性质.     

十六烷基三甲基氯化铵在β-环糊精水溶液中的胶束化行为

通过测定十六烷基三甲基氯化铵（CTAC）+H_2O和CTAC+β-环糊精（β-CD） +H_2O体系在298.15K时的电导和密度，计算了一系列重要的热力学参数，如临界胶 束浓度、胶束离解主工、CTAC分子碳链从β-环糊精水溶液到胶束的转移自由能、 CTAC的标准偏摩尔体积以及CTAC和β-CD形成的包络物的计量比和包络常数等，结 果表明，β-CD对CTAC的胶束化有较显蓍的影响，由于CTAC的疏水碳链被β-CD空腔 包络，CTAC的热力学活度降低，削弱了其胶束的生成，但是，β-CD及其包络物基 本上不参与CTAC胶束的生成，而且一旦胶束形成，包络物对CTAC的胶束性质也没有 明显的影响，在简单模型的基础上不参与CTAC胶束的生成，而且一旦胶束形成，包 络对CTAC的胶束性质也没有明显的影响，在简单模型的基础上，计算了CTAC分子碳 链进入β-CD疏水空腔的CH_2基团的数目，从另一方面证明β-CD与CTAC分子形成了 包络物，当β-CD的浓度较高时，包络物的计量比为2∶1。     

C16mimBr／Triton X-100混合体系的表面性质和胶团化行为

通过测定表面张力,研究了离子液体型表面活性剂溴化1-十六烷基-3-甲基咪唑（C16mimBr）和非离子表面活性剂TritonX-100（TX100）混合体系分别在水溶液和20％乙二醇（体积分数）水溶液中的表面性质和胶团化行为．结果表明,混合体系在水溶液和20％乙二醇水溶液中都存在协同效应,乙二醇的加入降低了协同作用,混...     

尾链含对硝基苯醚基团的阳离子Gemini表面活性剂的胶束化热力学

利用等温滴定微量量热法和电导法研究了具有不同疏水链长并且疏水链尾部含有对硝基苯醚基团的Gemini表面活性剂胶束化过程的热力学, 分别利用相分离模型和质量作用模型对观察焓与浓度的关系曲线进行拟合, 获得了胶束化过程的热力学参数. 两种模型获得的胶束化焓一致, 均为较大负值, 而吉布斯自由能却相差较大. 用相分离模型得到的胶束化过程的热容变化均为负值, 并随链长增加绝对值增大, 胶束化过程总的热容变化主要来自非极性的烷基链去水合产生的热容变化, 证明处于疏水链末端的对硝基苯醚基团在表面活性剂形成胶束后依然与水相接触. 质量作用模型获得的胶束聚集数随疏水链长增加逐渐下降, 这是由具有长疏水链的表面活性剂形成预胶束所导致.     

两亲无规聚合物的聚集行为及其与非离子表面活性剂的相互作用

以2-丙烯酰胺基-十二烷基磺酸(AMC12S)与2-丙烯酰胺基-2-甲基丙磺酸(AMPS)进行无规共聚,合成了含AMC12S摩尔分数(X)较高(X=0.1,0.3,0.5)的一系列两亲聚合物.采用稳态荧光及动态光散射技术对聚合物在水溶液中的聚集行为及其与三种非离子表面活性剂(HO(CH2CH2O)10C12H25(C12E10)、HO(CH2CH2O)20C12H25(C12E20)和HO(CH2CH2O)40C12H25(C12E40))的相互作用进行了研究,并考察了X对聚集行为的影响以及表面活性剂亲水基团长度对相互作用的影响.随着X的增大,聚合物的临界聚集浓度(CAC)明显减小,X=0.5时聚合物的CAC低达0.0039g·L-1.聚集体的流体力学半径(Rh)都大于26nm,并随着聚合物浓度的升高而增大,说明聚合物分子主要以分子间的聚集方式聚集,形成多分子聚集体.随X的增大,聚集体Rh减小,同时Rh随聚合物浓度升高而增大的幅度减小,说明聚集体结构变得更加紧实.表面活性剂与聚合物之间存在很强的相互作用,在混合溶液中表面活性剂浓度达到临界胶束浓度(CMC)左右时聚合物聚集体开始解离,形成混合聚集体.亲水基团长度增长,表面活性剂对聚合物聚集体的解离能力随之增强.C12E40与X=0.5的聚合物形成的混合聚集体Rh为6.8nm,与C12E40自身形成的聚集体尺寸相当.     

Micellization and Interaction Properties of Aqueous Solutions of Mixed Cationic and Nonionic Surfactants

The micellization process of binary surfactant mixtures containing cationic surfactants viz. dodecyl pyridinium halide (C₁₂PyX; X=Cl, Br, I), tetradecyl pyridium bromide (C₁₄PyBr), and hexadecyl pyridium halide (C₁₆PyX; X=Cl, Br) and a nonionic surfactants viz. dodecyl nonapolyethylene glycol ether (C₁₂E₉), dodecyl decapolyethylene glycol ether (C₁₂E₁₀), dodecyl dodecapolyethylene glycol ether (C₁₂E₁₂), and dodecyl pentadecapolyethylene glycol ether (C₁₂E₁₅) in water at different mole fractions (0–1) were studied by surface tension method. The composition of mixed micelles and the interaction parameter, β evaluated from the CMC data obtained by surface tension for different systems using Rubingh's theory were discussed. Activity coefficient (f₁ and f₂) of cationic surfactant (C_nPyBr)/C₁₂E_m (n=12, 14, 16 and m=10, 12, 15) mixed surfactant systems were evaluated, which shows extent of ideality of individual surfactant in mixed system. The stability factors for mixed micelles were also discussed by Maeda's approach, which was justified on the basis of steric factor due to difference in head group of nonionic surfactant.     

Influence of Glycerol and Temperature on the Phase Behavior and Micellization of CTAB and SDS in Aqueous Solutions

In this work the micellization of sodium dodecylsulfate (SDS) and cetyltrimethyammonium bromide (CTAB) in water-glycerol mixed solvent have been investigated at 25, 35, and 45°C, respectively. The micellization of both surfactants in pure water at different temperatures has also been studied. The phase diagrams of the surfactants in water-glycerol mixed solvent were also established. From the conductivity measurements, the critical micelle concentration (CMC) and the degree of counterion dissociation (β) were obtained as a function of glycerol-water ratio and temperature. Standard free energy of micellization (ΔG°_mic) as a function of glycerol contents and temperature was calculated and discussed. It has been found that the micellization of the two surfactant in solutions with glycerol at 25°C and in pure water at higher temperatures are not the same although they have equal dielectric constants values.     

ESR Studies on the Micellization Behaviors of a Series of Novel Asymmetric Gemini Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ ,ｂｉｓ(ｑｕａｔｅｒｎａｒｙａｍｍｏｎｉｕｍ)ｓｕｒｆａｃ ｔａｎｔｓｏｒｇｅｍｉｎｉｓｕｒｆａｃｔａｎｔｓ ,ｉｎｗｈｉｃｈｔｗｏｃａｔｉｏｎｉｃｓｕｒｆａｃ ｔａｎｔｍｏｉｅｔｉｅｓａｒｅｃｏｎｎｅｃｔｅｄｗｉｔｈｔｈｅａｍｍｏｎｉｕｍｈｅａｄｇｒｏｕｐｂｙａｐｌｏｙｍｅｔｈｙｌｅｎｅｃｈａｉｎ ,ｎａｍｅｌｙ ,ａｓｐａｃｅｒｈａｖｅｂｅｃｏｍｅｏｆｉｎｔｅｒｅｓｔｄｕｅｔｏｔｈｅｉｒｅｘｃｅｐｔｉｏｎａｌｓｕｒｆａｃｅａｃｔｉｖｉｔｙａｎｄｒｅｍ…     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

新型季铵盐氟碳表面活性剂的合成及其表面活性

以六氟环氧丙烷多聚体为原料,与N-甲基哌嗪经酰胺化反应制得含氟化合物(3);3与碘代烷经季铵化反应合成了4个新型的季铵盐型氟碳表面活性剂(5a~5d),其结构经1H NMR,19F NMR,IR和HR-ESI-MS表征。表面性能测试结果表明,5a~5d具有较高的表面活性,水溶液的临界胶束浓度(CMC)分别为1.38×10-4g·mL-1,1×10-4g·mL-1,1.40×10-4g·mL-1和3.72×10-4g·mL-1,对应CMC的表面张力分别为19.47mN·m-1,17.20 mN·m-1,17.98 mN·m-1和19.79 mN·m-1。     

季铵盐阳离子型双子表面活性剂的合成及其表面活性

以二甲基长链烷基叔胺和1,5-二溴戊烷为起始原料合成了系列不同疏水烷基长度的阳离子型双子表面活性剂m-5-m(m=8, 12, 16).对其表面活性进行了初步研究,结果表明:所合成的系列产物都具有较好的表面活性,其中16-5-16具有最低的临界胶束浓度(CMC 0.289 mmol·L-1);随着疏水烷基链的增长,表面活性剂的CMC显著降低.对应的表面张力(γCMC)则随m的增加先降低,后增高,当疏水链为12个碳时为最低值;8-5-8的表面活性最差.     

季铵盐型Gemini表面活性剂诱导囊泡结构改变机理研究

用动态光散射技术以及荧光探针方法, 研究了不同连接基长度的季铵盐型Gemini表面活性剂对卵磷脂囊泡结构改变的影响, 并借助理论模型和临界堆积参数理论探索了Gemini表面活性剂诱导囊泡结构改变的机理. 实验结果表明, 表面活性剂诱导囊泡结构改变的主要原因是表面活性剂嵌入到囊泡的双分子层中, 从而改变了囊泡的表面电荷强度以及嵌入后的表面活性剂在囊泡双分子层中分布的不均匀性. 此外, 表面活性剂分子的结构也会对其产生影响, 不同连接基长度的季铵盐型Gemini表面活性剂对囊泡结构改变的影响不完全相同, 但会呈现出一定的规律性.     

质谱法分析季铵盐型阳离子表面活性剂

以电子轰击质谱法(EI/MS)与电喷雾质谱法(ESI/MS)相结合,分析季铵盐型表面活性剂。由于阳离子表面活性剂在水溶液中离解成正离子,可用电喷雾质谱的正离子模式(ESI /MS)对其结构及组成进行鉴定,同时可判别季铵盐所含的Cl-、Br-、NO3-等阴离子。     

季铵盐型Gemini表面活性剂在金表面的吸附行为

以邻苯二酚(CC)为电化学探针, 利用循环伏安、交流阻抗等方法研究了不同阳离子Gemini表面活性剂(C16H33(CH3)2N-C4H8-N(CH3)2C16H33 (C16-C4-C16)、C12H25(CH3)2N-C4H8-N(CH3)2C12H25 (C12-C4-C12)、C8H17(CH3)2N-C4H8-N(CH3)2C8H17 (C8-C4-C8))在金电极表面的吸附性能. 结果表明, CC在KNO3溶液中可产生两对峰; 当向溶液中加入阳离子Gemini表面活性剂时, 第一对峰降低, 第二对峰升高, 峰电位差变大; 碳链长的表面活性剂对CC的氧化还原峰的影响较大. 同样, 碳链长的表面活性剂使电极界面的阻抗增大较多, 使石英晶片的频率变化较大. 根据CC的第一个氧化峰的面积随表面活性剂吸附的变化, 估测了它们的吸附模式. 发现这三种表面活性剂在金电极表面的吸附基本符合Langmuir吸附模型.     

Surface Activity of Novel Polymerizable Anionic Polyoxyethylene 4-Nonyl-2-Prpylene-Phenyl Ether Ammonium Sulfate Succinate Surfactants

Novel polymerizable surface-active monomers were synthesized by successive treatment of polyoxyethylene 4-nonyl-2-prpylene-phenyl ether ammonium sulfate with maleic anhydride in the presence of hydroquinone at temperature of 180°C. The molecular structures of the polymerizable surfactants were confirmed by ¹H and ¹³C NMR spectroscopy. The surface tension isotherms on the air-water solution interface were obtained. The critical micelle concentrations (cmc) as well as the surface tension at the cmc were determined for these substances. The micellization and adsorption of the prepared anionic surfactants have been investigated by surface tension, and cloud point measurements. Surface parameters such as surface excess concentration (Γ _max), the area per molecule at interface (A _min) and the effectiveness of surface tension reduction (π_CMC) were determined from the adsorption isotherms of the prepared surfactants.      

Effect of Sodium Alkanoates on Micellization of Dodecylbenzyldimethylammonium Chloride in Aqueous Medium

The present study deals with the interaction of sodium alkanoates viz. sodium acetate, sodium propionate, sodium butanoate, sodium hexanoate and sodium benzoate on the micellization of dodecylbenzyldimethylammonium chloride using conductometeric and flourscence quenching experiments carried out at 25°C. The analysis has been made through study of variation of critical micelle concentration (cmc), degree of counterion binding (β), aggregation number (N), and micropolarity with the concentration of these hydrophobic salts. The differentiation between the effects of hydrophobic and inorganic salts was made by comparing the above results with the influence of NaCl on cmc, β, and N.