BUTYL LACTATE: A USEFUL COSURFACTANT TO PREPARE O/W MICROEMULSIONS WITH SDS

The possibility of substitution of the conventional pentanol as cosurfactant by butyl lactate, on the preparation of OAV microemulsions in a system with SDS as anionic surfactant, is investigated. Whereas a narrow region of OAV microemulsion is described for the system with pentanol for a critical ratio 85/15 between water and SDS, butyl lactate leads to wider regions of solubility for different water/surfactant proportions, making easy the preparation of these microemulsions. Besides this advantage, being butyl lactate obtained from renewable resources and considered as a safe and biodegradable product, the microemulsions prepared with this cosurfactant could be applied in technological fields as cosmetic and dermopharmaceutical, where the biological agressivity of pentanol could avoid any practical application. As a complementary study, the influence that 1,3-buryleneglycol as polar cosolvent exert on the microemulsion regions, was also considered. Although according to experimental data given in the paper 1,3-butyleneglycol affects only slightly the OAV region of microemulsions, it can be foreseen that its presence could provide emollient characteristics to the final compositions.     

MICROEMULSION SYSTEMS WITH A NONIONIC COSURFACTANT

The conditions to obtain W/0 microemulsions using ionic surfactants and a nonionic cosurfactant, a polyoxyethylene alkyl ether, were investigated. The length of the polyoxyethylene chain was critical to obtain the typical water solubilization maximum

The variation of the W/0 microemulsion region with hydrocarbon content was different from that of the usual type of microemulsions having a medium chain length alcohol as cosurfactant. In the present systems the W/0 microemulsion region was not a direct continuation of the inverse micellar area at zero content of hydrocarbon. Addition of hydrocarbon was necessary for the formation of inverse micelles

The microemulsion regions were sensitive to the kind of hydrocarbon used; a sign of the importance of the nonionic surfactant for the stability of this kind of microemulsions.     

Microemulsions of Potassium Oleate,Tween-20, Propylene Carbonate,and Ethylene Glycol as Drug Vehicles for Mefenamic Acid

Different microemulsions were prepared with and without mefenamic acid (MFA). The base microemulsion was mainly composed of distilled water; the aqueous phase, propylene carbonate; the oil phase, potassium oleate; the surfactant, and finally di-ethylene glycol; the cosurfactant. The effect of mixing ionic (potassium oleate) with nonionic (Tween-20) surfactant was investigated via constructing the phase diagrams of such systems. Changes in conductivity and viscosity of the freshly prepared microemulsion over time were monitored as an indication for the stability of the microemulsion. Measurements were carried out at room temperature, after a freeze-thaw cycle and also after storage for 3 days at 60°C, where the latter is treated as an accelerated test for the time-temperature effects on the stability of a microemulsion. It was found that a set of surfactants, instead of a single surfactant, and inclusion of cosurfactant resulted in a broader region where a stable microemulsion is predominant. At a mass ratio of 1:2 of potassium oleate to Tween-20, O/W microemulsions were found to have maximum stability among all examined systems, under the accelerated test, such that they have a minimum portion of combined surfactants and cosurfactant of 60 wt% and maximum of 80 wt%. With the aforementioned specifications, no phase separation and neither significant change in the conductivity nor in the viscosity was observed in any of the examined systems after subjecting them both to the accelerated and freeze-thaw cycle test, indicating that such systems were thermodynamically stable. Samples of micro emulsions passing previous tests were further subjected to an acidic medium by dispersing 1 g of MFA-containing microemulsion in 10 g HCl solution (pH 1) in a shaking water bath at 37°C, for a 6 hour period. The maximum solubility of MFA in a stable microemulsion was approximately 5 wt%, evaluated at room temperature.     

混合表面活性剂微乳状液的形成和相行为研究进展

讨论了单一表面活性剂,混合表面活性剂,助溶剂等对油／水微乳状液的形成和相行为的影响。对混合表面活性剂微乳状液的形成和相行为研究工作进行了归纳和总结,重点分析了正负离子表面活性剂微乳状液的相行为和表面活性剂微乳状液的相行为和表面活性剂效率,讨论了微乳状液形成的影响因素,并提出了这一研究领域可能的发展前景。     

Fully dilutable microemulsions embedded with phospholipids and stabilized by short-chain organic acids and polyols

Evidence on the role of phosphatidylcholine (PC) as a membrane permeability enhancer was the driving force in forming new liquid nanosized (modified microemulsions) oral delivery system containing PC molecules. In this study we have demonstrated the feasibility of constructing phase diagrams with a large isotropic regions capable of being fully diluted with water. The microemulsions were stabilized with mixtures composed of PC and nonionic surfactant (polyoxyethylene-40 hydrogenated castor oil, HECO40) and short-chain organic acid as cosurfactant/cosolvent. When propionic acid served as the cosurfactant/cosolvent, the isotropic region was at its maximum (ca. 72% of the total phase diagram area). The presence of a blend of PC and HECO40 seems to have synergistic effects, forming an isotropic region comprising 72% of the area of the phase diagram, in comparison to 20 and 50% in systems stabilized by PC and HECO40, alone, respectively. The role of the PC molecules in the formation of those microemulsions is demonstrated by comparing three soy lecithins. Lecithin with a high PC content forms larger isotropic regions with more "free dilution" lines. Several nonionic surfactants have been investigated, yet only HECO40 seems to have a packing parameter suitable for the formation of large isotropic U-type systems.     

Effect of ionic surfactants on the phase behavior and structure of sucrose ester/water/oil systems

The phase behavior and structure of sucrose ester/water/oil systems in the presence of long-chain cosurfactant (monolaurin) and small amounts of ionic surfactants was investigated by phase study and small angle X-ray scattering. In a water/sucrose ester/monolaurin/decane system at 27 degrees C, instead of a three-phase microemulsion, lamellar liquid crystals are formed in the dilute region. Unlike other systems in the presence of alcohol as cosurfactant, the HLB composition does not change with dilution, since monolaurin adsorbs almost completely in the interface. The addition of small amounts of ionic surfactant, regardless of the counterion, increases the solubilization of water in W/O microemulsions. The solubilization on oil in O/W microemulsions is not much affected, but structuring is induced and a viscous isotropic phase is formed. At high ionic surfactant concentrations, the single-phase microemulsion disappears and liquid crystals are favored.     

Formation of fluorinated nonionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

A structurally related series of fluorinated nonionic oxyethylene glycol surfactants of the type C(m)F(2m+1)(CH(2))(n)O[(CH(2)CH(2)O)(p)H], denoted C(m.n)E(p) (where m=4, 6, or 7, m=1 or 2, and p=4 or 6) were synthesized and their surface behavior in aqueous solution was characterized. The ability of these surfactants to form water-in-hydrofluorocarbon (HFC) propellant 134a microemulsions suitable for use in the aerosolized delivery of water-soluble drugs has been investigated. Phase studies showed that, regardless of the composition used, clear one-phase systems could not be prepared if a fluorinated nonionic surfactant was used alone, or in combination with a short or medium fluorocarbon alcohol cosurfactant. Clear one-phase systems could, however, be prepared if a short-chain hydrocarbon alcohol, such as ethanol, n-propanol, or n-pentanol, was used as cosurfactant, with the extent of the one-phase region increasing with decreased chain length of the alcohol cosurfactant. Light-scattering studies on a number of the hydrocarbon-alcoholcontaining systems in the propellant-rich part of the phase diagram showed that only systems prepared with C(4.2)E(6) and propanol contained microemulsion droplets (all other systems investigated were considered to be cosolvent systems).     

EVALUATION OF TEXTILE DETERGENT EFFICIENCY OF MICROEMULSIONS IN SYSTEMS OF WATER NONIONIC SURFACTANT AND HYDROCARBON AT LOW TEMPERATURE

Washing efficiency of microemulsions in water/nonionic surfactant/hydrocarbon systems has been evaluated. Such microemulsions have proved to have an excellent performance as cleaning systems in conditions of minimum mechanical energy and at low temperatures. Their behaviour in the presence of small amounts of an ionic surfactant as well as the modifications promoted by the presence of builders have also been investigated.     

Phase behavior and microstructure of microemulsions with a room-temperature ionic liquid as the polar phase

Microemulsions of nonionic alkyl oligoethyleneoxide (CiEj) surfactants, alkanes, and ethylammonium nitrate (EAN), a room-temperature ionic liquid, have been prepared and characterized. Studies of phase behavior reveal that EAN microemulsions have many features in common with corresponding aqueous systems, the primary difference being that higher surfactant concentrations and longer surfactant tailgroups are required to offset the decreased solvophobicity the surfactant molecules in EAN compared with water. The response of the EAN microemulsions to variation in the length of the alkane, surfactant headgroup, and surfactant tailgroup has been found to parallel that observed in aqueous systems in most instances. EAN microemulsions exhibit a single broad small-angle X-ray scattering peak, like aqueous systems. These are well described by the Teubner-Strey model. A lamellar phase was also observed for surfactants with longer tails at lower temperatures. The scattering peaks of both microemulsion and lamellar phases move to lower wave vector on increasing temperature. This is ascribed to a decrease in the interfacial area of the surfactant layer. Phase behavior, small-angle X-ray scattering, and conductivity experiments have allowed the weakly to strongly structured transition to be identified for EAN systems.     

Microemulsification of triglyceride sebum and the role of interfacial structure on bicontinuous phase behavior

A unique triblock surfactant is reported that allows for the efficient microemulsification of triglycerides. Unlike the results of all previous efforts, these triglyceride microemulsions can be formed without the use of cosurfactants or dilution with co-oils and follow the classical patterns of surfactant phase behavior exhibited by mixtures of water, alkane oils, and nonionic oligoethylene glycol surfactants, i.e., progression from oil/water emulsions to one-phase microemulsions to water/oil emulsions with increasing temperature. Lamellar phases that usually dominate the aqueous phase behavior of surfactant/triglyceride mixtures are suppressed, allowing for the formation of single-phase microemulsions containing equal amounts of triglyceride and water. These isotropic and low-viscous fluids are particularly useful for cleansing and delivery of functional ingredients in skin care products. The effects of mixing a variety of typical skin care ingredients and components of sebum (skin oil) were also explored. Fatty acids significantly reduce the average microemulsion temperature, while other ingredients and oils, which do not partition at the oil/water interface, have less impact on the phase behavior. In all cases, one-phase microemulsions containing equal amounts of oil and water can be formed even at high additive concentrations. Indeed, partial replacement oftriglyceride with any of the additives examined consistently reduced the amount of surfactant necessary to form single-phase microemulsions. However, the greatest boost in surfactant efficiency was found with the addition of medium molecular weight amphiphilic block copolymers.     

Interfacial composition, thermodynamic properties, and structural parameters of water-in-oil microemulsions stabilized by 1-pentanol and mixed surfactants

The present study is focused on the evaluation of the interfacial composition, thermodynamic properties, and structural parameters of water-in-oil mixed surfactant microemulsions [(cetylpyridinium chloride, CPC+polyoxyethylene (20) cetyl ether, Brij-58 or polyoxyethylene (20) stearyl ether, Brij-78)/1-pentanol/n-heptane, or n-decane] under various physicochemical environments by the Schulman method of cosurfactant titration of the oil/water interface. The estimation of the number of moles of 1-pentanol at the interface (n(a)(i)) and bulk oil (n(a)(o)) and its distribution between these two domains at the threshold level of stability have been emphasized. The thermodynamics of transfer of 1-pentanol from the continuous oil phase to the interface have been evaluated. n(a)(i),n(a)(i), standard Gibbs free energy (ΔG(t)(0)), standard enthalpy (ΔH(t)(0)), and standard entropy (ΔG(t)(0)) of transfer process have been found to be dependent on the molar ratio of water to surfactant (ω), type of nonionic surfactant and its content (X(Brij-58 or Brij-78)), oil and temperature. A correlation between (ΔH(t)(0)) and (ΔS(t)(0)) is examined at different experimental temperatures. Bulk surfactant composition dependent temperature insensitive microemulsions have been reported. Associated structural parameters, such as droplet dimensions and aggregation number of surfactant and cosurfactant at the droplet interface have been evaluated using a mathematical model after suitable modifications for mixed surfactant systems. In light of these parameters, the prospect of using these microemulsion systems for the synthesis of nanoparticles and the modulation of enzyme activity has been discussed. Correlations of the results in terms of the evaluated physicochemical parameters have been attempted.     

Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies

Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room‐temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. ¹H, ¹¹B, and ¹⁹F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim][BF₄]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X‐100 (TX‐100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim]⁺ and [BF₄]^? in the presence of TX‐100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim]⁺ and [BF₄]^? and migration of Cl^? within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures.     

The origin of thermodynamic stability of microemulsions

The adsorption of surfactant and cosurfactant on the surface of the globules decreases the interfacial tension between oil and water to very low values. In addition, the decrease of the bulk concentrations of the surfactant and cosurfactant decreases their chemical potential both in the bulk and at the interface, thus decreasing the free energy of the system (dilution effect). The thermodynamic stability of microemulsions is due to the fact that the total free energy change caused by these effects can become negative. The theory can explain the occurence of stable microemulsions for both non-ionic and ionic surfactants.     

Background and operating parameters in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrodriven separation technique. Separations are generally achieved using microemulsions consisting of surfactant-coated nanometer-sized oil droplets suspended in aqueous buffer. A cosurfactant such as a short-chain alcohol is generally used to stabilize the microemulsion. This review summarizes the various microemulsion types and compositions that have been used in MEEKC. The effects of key-operating variables such as surfactant type and concentration, cosurfactant type and concentration, buffer pH and type, oil type and concentration, use of organic solvent and cyclodextrin additions, and temperature are described. Specific examples of water-in-oil microemulsions and chirally selective separations are also covered.     

Recent advances in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrodriven separation technique. Separations are typically achieved using oil-in-water microemulsions, which are composed of nanometre-sized droplets of oil suspended in aqueous buffer. The oil droplets are coated in surfactant molecules and the system is stabilised by the addition of a short-chain alcohol cosurfactant. The novel use of water-in-oil microemulsions for MEEKC separations has also been investigated recently. This report summarises the different microemulsion types and compositions used to-date and their applications with a focus on recent papers (2002-2004). The effects of key operating variables (pH, surfactant, cosurfactant, oil phase, buffer, additives, temperature, organic modifier) and methodology techniques are described.     

Fluorinated ionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

The factors influencing the formation of water-in-134a-propellant microemulsions using the fluorinated ionic surfactants ammonium perfluorooctanoate, ammonium perfluoroheptanoate, and sodium perfluorooctanoate has been determined. None of the fluorinated ionic surfactants could be used to prepare clear, one-phase systems when used as sole surfactant, but they could be when combined with a short-chain fluoro- or hydrocarbon alcohol in surfactant:cosurfactant weight-mixing ratios (K(m)) in the range 1:2 to 2:1. When hydrocarbon alcohols were used this clear region extended over a wide range of compositions and was confirmed by means of photon correlation spectroscopy (PCS) to contain microemulsion droplets in the propellant-rich part of the phase diagram. PCS studies performed in the presence of the water-soluble drug terbutaline sulfate showed that it was possible to solubilize the drug within water-in-propellant microemulsion droplets. These studies confirm for the first time that it is possible to prepare water-in-propellant 134a microemulsions using fluorinated ionic surfactants and to solubilize water-soluble drugs within these systems.     

Microemulsions from silicone oil with an anionic/nonionic surfactant mixture

Microemulsion phases have been prepared for the first time from the silicone oil "M(2)" (hexamethyldisiloxane) and a surfactant mixture of a nonionic surfactant "IT 3" (isotridecyltriethyleneglycolether) and an ionic surfactant Ca(DS)(2) (calciumdodecylsulfate). For such a surfactant mixture the hydrophilicity of the system can be tuned by the mixing ratio of the two components. With increasing IT 3 content, the surfactant mixtures show a L(1)-phase, a wide L(α)-region and a narrow L(3) sponge phase. For constant temperature, two single phase channels exist in the microemulsion system. The lower channel (low IT 3 content) ends in the middle of the phase diagram with equal amounts of water and oil, the upper channel begins with the L(3)-phase and passes all the way to the oil phase. Conductivity data show that the upper channel has a bi-continuous morphology up to 40% oil while the lower channel consists of oil droplets in water. In contrast to previous studies on nonionic systems, the two single phase channels are not connected and microemulsions with equal amount of oil and water do not have a bicontinuous structure.     

Microemulsion formed by alkyl polyglucoside and an alkyl glycerol ether with weakly charged films

We have studied the effects on phase equilibria of a nonionic surfactant mixture-water-oil system when replacing small amount of surfactant molecules by ionic surfactant, sodium dodecyl sulfate (SDS). The nonionic surfactant system contains dodecyl-beta-D-maltoside (C(12)AG2) and iso-octyl glyceryl ether (i-C(8)GE) as cosurfactant, water and cyclohexane at constant water to oil ratio of 60/40 (w/w). Adding a small amount of SDS has large impact on the phase behavior. Clear liquid crystalline phase and upper microemulsion phase are added to the phase sequence at high i-C(8)GE/(C(12)AG2+i-C(8)GE) ratio. We also compare the phase equilibria of pure dodecyl maltoside system with polyglucosides mixture system.     

Role of the Surfactant Structure in the Behavior of Hydrophobic Ionic Liquids within Aqueous Micellar Solutions

The behavior of an ionic liquid (IL) within aqueous micellar solutions is governed by its unique property to act as both an electrolyte and a cosolvent. The influence of the surfactant structure on the properties of aqueous micellar solutions of zwitterionic SB‐12, nonionic Brij‐35 and TX‐100, and anionic sodium dodecyl sulfate (SDS) in the presence of the “hydrophobic” IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]) is assessed along with the possibility of forming oil‐in‐water microemulsions in which the IL acts as the “oil” phase. The solubility of [bmim][PF₆] within aqueous micellar solutions increases with increasing surfactant concentration. In contrast to anionic SDS, the zwitterionic and nonionic surfactant solutions solubilize more [bmim][PF₆] at higher concentrations and the average aggregate size remains almost unchanged. The formation of IL‐in‐water microemulsions when the concentration of [bmim][PF₆] is above its aqueous solubility is suggested for nonionic Brij‐35 and TX‐100 aqueous surfactant solutions.     

O/W微乳中的2，4-二硝基氯苯水解反应

微乳状液，简称微乳，通常是由表面活性剂、助表面活性剂、水和油形成的澄清、透明、稳定的分散体系．分散相直径一般在20-100nm之间[1].表面活性剂和助表面活性剂通常占微乳的15－25％（质量分数）[2]、典型的助表面活性剂是中等碳键长度的醇．显然，微乳是一种高度分散的间隔