POLYMERIC SURFACTANTS BASED ON OLEIC ACID III. Copolymerization of Sodium Acrylamidostearate and Oleic Acid in a Lamellar Liquid Crystal

Copolymerization of sodium acrylamidostearate (NaAAS) and oleic acid was performed in the lamellar liquid crystal (LLC) formed by NaAAS, oleic acid and water, in the absence of N.N’-methylenebisacrylamide (MBAA) and in the presence of MBAA, respectively. In the absence of MBAA, after the polymerization the lamellar structure remained, and the disorder of the lamellar liquid crystal was, to some extent, enhanced. Surface tension, small-angle X-ray diffraction, viscosity, and fluorescence methods were used to study the properties of the linear copolymer. The linear polymeric surfactant behaves like     

油酸/三乙醇胺/液体石蜡水体系层状润滑性能

采用^2HNMRT和IR,表征了油酸／三乙醇胺／液体石蜡／水体系层状液晶的结构,并以该体系为润滑剂,测定了其在铝合金表面的磨痕宽度和摩擦系数,同时与液体石蜡和商用润滑剂12－羟基硬脂酸锂进行了比较。结果表明,OLA／TEA／LP／H2O体系丑状液晶具有较好的极压性能,对于铝合金材料是一种较好的润滑剂。     

小角X射线散射表征AOT/水层状溶致液晶的有序性

用小角X射线散射研究了AOT/水层状溶致液晶的有序性. 通过对散射曲线的解析, 讨论了表面活性剂浓度、温度和助表面活性剂等三个方面对溶致液晶层状相结构有序性的影响. 在一定的范围内, 提高温度, 改变表面活性剂浓度和加入少量助表面活性剂可使碳氢链排列由稀疏转变为密实, 层状相也相应地由“柔性双层”过渡到更加有序化的“平面双层”. 基于形状因子和体系内分子间作用力, 提出了层状相形成与有序化的机理, 同时采用分子模拟的方法展现了不同浓度下的液晶结构.     

苯胺在十二烷基苯磺酸/水体系中的乳液聚合过程研究

利用光学显微镜和扫描电镜,对以水为介质、十二烷基苯磺酸(DBSA)为乳化剂的苯胺乳液聚合过程进行监测,发现苯胺在水体系中与DBSA反应形成DBSA-苯胺盐的棒状聚集结构,讨论了DBSA、苯胺、氧化剂的配比及浓度对聚合过程中棒状聚集结构的长度和数量及生成聚苯胺的电导率的影响,提出苯胺在DBSA/水体系中的乳液聚合反应是在胶束表面进行的,而棒状聚集结构中的DBSA-苯胺盐单体经水相扩散到乳胶粒子中,形成颗粒状的聚苯胺.     

Vinyl Polymerization. 350. Polymerization of Methyl Methacrylate Initiated by the System Sodium Polyvinyl Sulfonate)/Ferric Chloride/Water

In an aqueous medium, sodium polyvinyl sulfonate)(PVS-Na) initiated radical polymerization of methyl methacrylate (MMA) in the presence of ferric chloride. The presence of water and Fe(III) ion was essential. The polymerization was concluded to take place in the aqueous phase. The effects of the amount of water, MMA, Fe(III) ion, and temperature on the polymerization were studied. The mechanism of the initiation is discussed.     

Triton X-100/正癸醇/水层状液晶制备泡囊

利用层状结构在超声振荡下可以弯曲变形的特点 ,以TritonX 100/n C10H21OH/H2O体系生成的层状液晶为介质制备泡囊,所得泡囊分布比较均匀 ,囊径在0.2～0.5μm之间.研究了层状液晶组成、pH、超声振荡时间等因素对所制泡囊的 ζ电位及微极性的影响.     

NMR.-Investigation of the Formaldehyde Addition and Oligomerisation Equilibria in the System Formaldehyde/Water/Acetic Acid/Hydrochloric Acid

An NMR. investigation of the state of formaldehyde in acidic solutions has been carried out. Solutions of DCl/D₂O/CD₃COOD containing two sources of formaldehyde, i.e. paraformaldehyde (I) and trioxane (II), were used for this purpose. In systems I and II the effect of various D₂O/CD₃COOD ratios, at a constant DCl concentration, was studied, while for II the effect of changing DCl concentration was also investigated. The results show that in aqueous solution, formaldehyde exists primarily as the monomeric and linear oligomeric forms of methylene glycol. Reducing the amount of D₂O (at constant DCl concentration), while increasing the CD₃COOD content, results in an increase in the polymeric species and in trioxane. In addition, substitution of water by acetic acid results in systems that are catalytically more active than aqueous solutions of the same hydrochloric acid concentration. Along with the usual polymer-monomer equilibria which exist in such solutions, side reactions of methylene glycol with the hydrochloric acid present also occur to a small extent, e.g. acetylation, substitution of OH by Cl and the Cannizzaro reaction. It is suggested that these findings will result in a better understanding of the formaldehyde crosslinking reactions in cotton cellulose.     

Phase‐ and Size‐Controllable Synthesis of Hexagonal Upconversion Rare‐Earth Fluoride Nanocrystals through an Oleic Acid/Ionic Liquid Two‐Phase System

Herein, we introduce a facile, user‐ and environmentally friendly (n‐octanol‐induced) oleic acid (OA)/ionic liquid (IL) two‐phase system for the phase‐ and size‐controllable synthesis of water‐soluble hexagonal rare earth (RE=La, Gd, and Y) fluoride nanocrystals with uniform morphologies (mainly spheres and elongated particles) and small sizes (<50 nm). The unique role of the IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BmimPF₆) and n‐octanol in modulating the phase structure and particle size are discussed in detail. More importantly, the mechanism of the (n‐octanol‐induced) OA/IL two‐phase system, the formation of the RE fluoride nanocrystals, and the distinctive size‐ and morphology‐controlling capacity of the system are presented. BmimPF₆ is versatile in term of crystal‐phase manipulation, size and shape maintenance, and providing water solubility in a one‐step reaction. The luminescent properties of Er³⁺‐, Ho³⁺‐, and Tm³⁺‐doped LaF₃, NaGdF₄, and NaYF₄ nanocrystals were also studied. It is worth noting that the as‐prepared products can be directly dispersed in water due to the hydrophilic property of Bmim⁺ (cationic part of the IL) as a capping agent. This advantageous feature has made the IL‐capped products favorable in facile surface modifications, such as the classic Stober method. Finally, the cytotoxicity evaluation of NaYF₄:Yb,Er nanocrystals before and after silica coating was conducted for further biological applications.