Rheology and Rheokinetics of Photosensitive Micelle Composed of 3-Chloro-2-Hydroxypropyl Oleyl Dimethyl Ammonium Acetate and trans-4-Phenylazo Benzoic Acid

A novel rheological reversible photosensitive micelle composed of 3-chloro-2-hydroxypropyl oleyl dimethyl ammonium acetate (ODAA) and trans-4-phenylazo benzoic acid (trans-ACA) was investigated. The mixed micelle system under a suitable molar ratio (ODAA:ACA = 1.25:1) shows great viscoelastic property. Before UV irradiation, the ODAA/ACA micelle system exhibits high viscosity and good viscoelasticity. Upon irradiation by UV light (365 nm), ACA undergoes a photoisomerization from its trans to its cis form, causing a change of the molecular structure, which leads to viscosity decreases obviously; thixotropy and viscoelasticity almost disappear. The above changes of rheological properties can be reversible by exposing to visible light. Furthermore, the rheokinetics process of ODAA/ACA micelle system during UV irradiation was studied and rheokinetics equation was established, which can well describe the changing processes of viscosity and viscoelasticity. The viscoelasticity process is divided into two sections to be simulated by rheokinetics equation. In addition, these photosensitive phenomena are repeatable easily and the mechanism can be validated by UV-vis spectra.     

Interfacial Rheological Property and Rheokinetics of a Novel Photoreversible Micellar System

A new photorheologically reversible micelle composed of a polymerizable cationic surfactant N-cetyl dimethylallyl ammonium chloride (CDAAC) and trans-4-phenylazo benzoic acid (trans-ACA) was prepared. Exposing the CDAAC/trans-ACA (14 mM/10 mM) micellar system to the UV light (365 nm) resulted in a decrease in the relative viscosity, and in turn, the relative viscosity increases to its initial value when the micellar system was exposed to visible light (460 nm), which is caused by the photoisomerization of ACA. The interfacial tension and modulus of the micellar system change significantly after UV irradiation and show the reversible interfacial rheological properties when irradiated by visible light. Furthermore, for the first time the dynamic changing of the rheological properties, i.e., the decreasing of viscosity and viscoelasticity during the UV irradiation, has been studied and well described by a rheokinetics model.     

Rheological property and rheokinetics of novel photogelling fluids

A novel photorheological fluid composed of cationic Gemini surfactant N, N’-bis (octadecyl dimethyl)-1, 2-dichloride-propyl ammonium salt (C₁₈-3-C₁₈) and trans-ortho-methoxycinnamic acid (trans-OMCA) was investigated. When C₁₈-3-C₁₈ and trans-OMCA are mixed in equimolar quantities, the result is a low-viscosity Newtonian fluid with no thixotropy. After irradiation by UV light (365?nm), trans-OMCA is converted to cis-OMCA, and in turn, the solution undergoes more than 50 fold increase in the relative viscosity and exhibits shear thinning and thixotropy. The viscosity rise is associated with the formation of wormlike micellar network in the solution, which was confirmed by cryo-scanning electron microscopy (cryo-SEM). Furthermore, the rheokinetics process of the C₁₈-3-C₁₈/trans-OMCA solutions during UV irradiation was studied and rheokinetics equation was established, which can well describe the dynamic changing of the rheological properties. Critical packing parameter was introduced to explain the mechanism of photo-induced micelle transition.     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.     

Rheological Properties of Mixed Aqueous Solutions of Geminis (12‐3‐12,2Br−) and SDS

The rheological properties of surfactant solutions are the main parameter that affects the surfactant application. In this work, the rheology of the mixed system 12‐3‐12,2Br^?/SDS/H₂O was discussed particularly. The relationship between the microstructure of surfactant aggregates and rheology of mixed solutions was explored. It is shown that the rheological properties of solutions have different behaviors at different molar ratio of two surfactants under given total concentration. With the increase of molar ratio (12‐3‐12,2Br^?/SDS), the solution change from Newtonian liquid into positive thixotropy then to negative thixotropy, at last turn to positive thixotropy again, and ATPS becomes the dividing line. The difference of rheological properties is the embodiment of difference for surfactant aggregates' microstructures. The cryo‐TEM results shown that the solutions containing aggregates with big size, such as rodlike micelles, multilamellar micelles, show positive thixotropy. However, the solutions containing lamellar micelles or liquid crystal will show negative thixotropy. The positive thixotropy endows the mixied system a potential application in enhanced oil recovery.     

Amperometric Glucose Sensor Fabricated by Combining Glucose Oxidase Micelle Membrane and Aminated Glassy Carbon Electrode

Abstract

An amperometric glucose biosensor based on the detection of the reduction of oxygen has been developed by combining an aminated glassy carbon electrode with a polystyrene (PS) membrane containing glucose oxidase (GOD) micelles. The structure of GOD micelles contained in PS membrane was observed by scanning electron microscope. The micelle has a roughly spherical shape, and the enzyme colony is contained inside the micelle. This glucose sensor exhibited good sensitivity with short response time (within 2 min). A good linear relationship was observed in the concentration range of 0.2 mM to 2.6 mM when the applied potential was ? 0.45 V vs. Ag/AgCl.     

Rheological properties of the aqueous mixtures of cationic-anionic surfactants

The rheological properties of the aqueous mixtures of cationic-anionic surfactants, both in single-phase systems and in aqueous two-phase systems, have been studied. Bizarre rheological properties —negative thixotropy, viscoelasticity and hihg viscosity of shear rate dependent at relatively low concentration — have been observed. An unusual viscosity change, that is, viscosity lowering with increasing concentration, was obtained. The negative thixotropy might be due to the existence of lamellar or sheet-like micelles, viscoelasticity might be induced by rodlike and lamellar or sheet-like micelles, the high viscosity might be a consequence of the formation of network by long rodlike micelles and the concentration-induced viscosity lowering could be interpreted in terms of the decrease of micellar dimensions with concentration.     

Rheology and high-temperature stability of novel viscoelastic gemini micelle solutions

To broaden the application of clean fracturing fluid based on surfactant, a gemini cationic C₂₅-tailed surfactant, called FL-25, was synthesized. FL-25 can form a wormlike viscoelastic fluid in aqueous solution without adding any organic or inorganic salts. The rheological properties and thermal stability of the novel gemini micelle solutions were further investigated. The results show that the gemini micelle solution possesses viscoelasticity, thixotropy, and shear-thinning properties. The apparent viscosity of the viscoelastic gemini micelle solution at a shear rate of 170?s^?1 remains approximately 69?mPa?·?s at 110°C for 90 minutes, showing good high-temperature-resistance property. FL-25 may be a novel gemini surfactant applied in clean viscoelastic surfactant fracturing fluids in the oil and gas field.     

Cinnamoyl Pluronic F127 as a Stimuli-Sensitive Amphiphile

Cinnamoyl Pluronic F127 (CP F127) was prepared by reacting cinnamoyl chloride and Pluronic F127. On the ¹H NMR spectrum of CP F127, 1.2 moiety of cinnamoyl group was found to be attached to one molecule of CP F127. Using pyrene as a fluorescence probe, it was found that not only Pluronic F127 but also CP F127 could be readily assembled into micelles, and the critical micelle concentration was around 0.015 mg/ml and 0.03 mg/ml, respectively. Pluronic F127 in aqueous solution (2% w/v) could form no particles in 10–20°C, but particles (ca. 30 nm in diameter) were detected on a dynamic light scattering machine in 25–40°C possibly due to the thermal micellization. However, CP F127 was assembled into particles (ca. 230 nm) even in the lower temperature range, possibly because of the intermolecular hydrophobic interaction of the cinnamoyl group. The particle size of CP F127 strongly depended on the medium temperature and UV irradiation time. CP F127 was a good emulsifier for the preparation of O/W emulsions. The oil droplet size markedly increased upon UV irradiation (254 nm, 6 W), possibly because of the photo-dimerization of cinnamoyl group, but it was little affected by the temperature change (10–40°C).     

Reversible photorheological fluids based on spiropyran-doped reverse micelles

We describe a new class of photorheological (PR) fluids whose rheological properties can be reversibly tuned by light. The fluids were obtained by doping lecithin/sodium deoxycholate (SDC) reverse micelles with a photochromic spiropyran (SP) compound. Initially, the lecithin/SDC/SP mixtures formed highly viscoelastic fluids, reflecting the presence of long, wormlike reverse micelles. Under UV irradiation, the SP was isomerized to the open merocyanine (MC) form, causing the fluid viscosity to decrease 10-fold. When the UV irradiation was switched off, the MC reverted to the SP form, and the viscosity recovered its initial value. This cycle could be repeated several times without loss of response. The rheological transitions are believed to reflect changes in the lengths of the reverse worms. To our knowledge, this is the first example of a simple, reversible PR fluid that can be made entirely from commercially available components.     

Metal-driven viscoelastic wormlike micelle in anionic/zwitterionic surfactant systems and template-directed synthesis of dendritic silver nanostructures

In this work, metal ion-induced viscoelastic wormlike micelles in anionic/zwitterionic surfactant solutions (sodium dodecylsulfate/tetradecyldimethylammoniumpropanesulfonate, SDS/TPS) are reported. Steady and dynamic rheology and cryogenic transmission electron microscopy (cryo-TEM) are employed to characterize wormlike micelles in the SDS/TPS/Ca(NO(3))(2) system. Moreover, the surfactant mixing ratio and surfactant tail length are varied to reveal the factors that influence wormlike micelle growth and solution viscoelasticity. A series of metal ions such as Na(+), Mg(2+), Zn(2+), and Al(3+) are proven to promote viscoelastic wormlike micelle formation in the SDS/TPS system. The metal-containing wormlike micelles are expected to be good candidates for directing the synthesis of inorganic nanomaterials. In this article, dendritic silver nanostructures have been prepared in the surfactant wormlike micelle by in situ UV irradiation for the first time.     

具有温敏性的混合胶束的制备与表征及药物体外释放

通过原子转移自由基聚合(ATRP)合成了以胆固醇为端基的两亲性聚(N-异丙基丙烯酰胺)(Chol-PNIPAAm),利用FTIR、1H-NMR和GPC等方法表征了聚合物的结构.将该两亲性温敏聚合物与聚乙二醇单甲醚硬脂酸酯(mPEG-SA)通过简单混合,即可得到稳定的Chol-PNIPAAm/mPEG-SA混合胶束体系....     

Micellar effects of a triazole-based cationic gemini surfactant on the rate of a nucleophilic aromatic substitution reaction

The reaction between 2,4-dinitrochlorobenzene (DNCB) and hydroxide ion was studied spectrophotometrically at 25 °C in micelles of a triazole-based cationic gemini surfactant 18-triazole-18 or micelles of the conventional cationic surfactant CTAB. Both CTAB and 18-triazole-18 accelerated this nucleophilic aromatic substitution reaction. The binding constant of the substrate to the micelle, K _S, for 18-triazole-18 (K _S=335 M⁻¹) was found to be much larger than that for CTAB (85 M⁻¹) by fitting the kinetic results with pseudophase ion-exchange (PIE) model, which suggests that DNCB binds with gemini micelles more easily than it does with CTAB micelles. It was also found that 18-triazole-18 catalytic system was in accordance with PIE model at surfactant concentrations below ca. 0.5 mM, above which the increase of viscosity and the change of micelle size with increased surfactant concentration may remarkably influence the reaction. This was quite different from the reaction catalyzed by micelles of the conventional surfactant CTAB.     

双亲性光敏感遥爪聚合物C-PNIPAAm的合成与性能

以7-羟基-4-甲基香豆素为原料,依次与环氧氯丙烷、二硫化钠反应得一含香豆素基元的二硫化物(C-S-S-C),并以其与三丁基膦复合体系为链转移剂,偶氮二异丁腈(AIBN)为引发剂,N-异丙基丙烯酰胺(NIPAAm)为单体制备了末端为香豆素光响应基元的双亲性遥爪聚合物(C-PNIPAAm).用傅里叶变换红外(FT-IR)光谱、凝胶渗透色谱(GPC)、氢核磁共振(1H-NMR)等对该聚合物进行了结构表征.研究显示该双亲性遥爪聚合物可在水中直接形成胶束,并以荧光素为疏水性客体考察了聚合物胶束的光控释放行为.在波长大于310 nm的紫外光照射下,聚合物链末端的香豆素单元可进行光二聚,胶束结构随之改变,因而所负载的荧光素可得到逐步有效释放.动态激光光散射(DLS)检测显示,光二聚反应使聚合物胶束平均粒径从56.6 nm增大至101.0 nm.     

Formation and microstructure transition of F127/TX-100 complex

Formation and structure transition of the complex composed of triblock copolymer F127 and nonionic surfactant TX-100 have been investigated by 1H NMR spectroscopy, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC). Three TX-100 concentration regions are identified, within which TX-100/20 mg/mL F127 complex undergoes different temperature-induced structure transitions. In low concentration region (< 9.42 mM), F127 single molecular species (unimers) wrap around TX-100 micelles forming F127/TX-100 complex with TX-100 micelle as the skeleton at a lower temperature (5 degrees C), and the skeleton transfers to F127 micelle at higher temperature (40 degrees C); in intermediate TX-100 concentration region (9.42-94.85 mM), the skeleton of F127/TX-100 complex transfers from TX-100 micelle successively into F127 micelle and TX-100 micelle again upon heating. The interaction of F127 with TX-100 is saturated in high TX-100 concentration region (> 157.57 mM), and free TX-100 micelles coexist with larger clusters of F127/TX-100 complexes. In addition, TX-100-induced F127/TX-100 complex formation and structure transition are also investigated at constant temperatures. The results show that within 5-10 degrees C, F127 unimers mainly adsorb on the surface of TX-100 micelles just like normal water soluble polymers; in the temperature region of 15-25 degrees C, TX-100 micelles prompts F127 micelle formation. Within 30-40 degrees C, TX-100 inserts into F127 micelles leading to the breakdown of F127 aggregates at higher TX-100 concentrations, and the obtained unimers thread through TX-100 micelles forming complex with TX-100 micelle as skeleton.     

Surface and Solution Properties of Cationic Gemini Surfactants with Primary Linear Alkanols

Using surface tension and fluorescence methods, the surface and solution properties of two cationic gemini surfactants {pentanediyl-1,5-bis(dimethylcetylammonium bromide) and hexanediyl-1,6-bis(dimethylcetylammonium bromide)} (referred to as 16-5-16 and 16-6-16) have been studied in the presence and absence of primary linear alkanols. Parameters studied include the critical micelle concentration (CMC), C ₂₀ (the surfactant concentration required to reduce the surface tension of the solvent by 20 mN·m^?1), Г _max (maximum surface excess), and A _min (minimum surface area per molecule). These parameters indicate mixed micelle formation and, therefore, surfactant-additive interaction parameters in mixed micelles and mixed monolayers, as well as activity coefficients, were calculated. A synergistic effect was observed in all instances and was found to be correlated with the chain length of the alkanols. The CMC values of 16-s-16 (s = 5, 6) decrease with increasing alkanol concentration and the extent of this effect follows the sequence: 1-octanol (C₈OH) > 1-heptanol (C₇OH) > hexan-1-ol (C₆OH) > 1-pentanol (C₅OH) > butanol (C₄OH). The micelle aggregation number (N _agg) of mixed micelles has been obtained using the steady state fluorescence quenching method. The micropolarity of gemini/alkanol systems has been evaluated from the ratio of intensity of peaks (I ₁/I ₃) of the pyrene fluorescence emission spectra. Results are interpreted on the basis of the structure of mixed micelles and monolayers.     

Bioinspired core‐crosslinked micelles from thymine‐functionalized amphiphilic block copolymers: Hydrogen bonding and photo‐crosslinking study

Bioinspired core‐bound polymeric micelles, based on hydrogen bonding and photo‐crosslinking, of thymine have been prepared from poly(vinylbenzylthymine)‐b‐poly(vinylbenzyltriethylammonium chloride). The amphiphilic block copolymer was synthesized by 2,2‐tetramethylpiperidin‐1‐oxyl‐mediated living radical polymerization in water/ethylene glycol solution. Micelle characterization and critical micelle concentration measurements demonstrated that the hydrogen bonding of the attached thymine units stabilizes the micelles. Further, core‐crosslinked polymeric micelles were formed by ultraviolet (UV) radiation showing that the stability of the micelle could be controlled by the UV crosslinking of the attached thymines. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effects of Inorganic Salts on Micellization and Solubilization in an Aqueous Solution of Poly(ethylene oxide)/Poly(propylene oxide)/Poly(ethylene oxide) Triblock Copolymer

The effects of inorganic salts on micellization and solubilization of prednisolone in aqueous solution of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer (Pluronic P85) were studied. The effect of inorganic salts on decrease in the cloud point and the critical micelle concentration (cmc) of Pluronic P85 was the order of Na₂HPO₄ > NaH₂PO₄ > NaCl > NaBr. Moreover, it was found that Pluronic P85 forms two kinds of micelles: monomolecular micelles and polymolecular micelles. The polymolecular micelle increased with increasing amount of added inorganic salts. Moreover, solubilization behavior is explained from the standpoint of salting out for prednisolone and association characteristics of Pluronic P85.     

Micellar Aggregation Behavior and Electrochemically Reversible Solubilization of a Redox-Active Nonionic Surfactant

For the purpose of studying the potential of a novel nonionic switchable surfactant, 11-ferrocenylundecyl polyoxyethylene ether (FPEG), applied to surfactant-enhanced remediation (SER), the surface properties and micelle solubilization behavior of FPEG were investigated with different inorganic salts. With the addition of inorganic salts (NaCl and CaCl₂), the critical micelle concentration (CMC) of FPEG dropped from 15 to 12 and 8 mg·L^?1, respectively, due to the salting-out effect on the alkyl chain. Thermodynamic parameters based on the CMCs indicated that micelle formation was an entropy-driven process. Dynamic light scattering measurements verified that these inorganic salts can decrease the hydrodynamic diameters (D _h) of the micelles. Solubilization experiments with three typical polycyclic aromatic hydrocarbons (PAHs) demonstrated that the system of FPEG with NaCl shows the highest solubilization ability, and the molar solubilization ratio and micelle–water partition coefficient (K _m ) values follow the order pyrene > phenanthrene > acenaphthene. After oxidation, PAHs can be released from the micelles through breaking up of the micelles, and the cumulative release efficiency of pyrene, phenanthrene and acenaphthene are 31.2, 42.8 and 44.6 %; the order of release efficiency is opposite to that of the reduced form for solubilization abilities. All the results suggest that the ferrocene-containing, redox-active surfactant FPEG has the potential to be recycled in SER technology through electrochemistry approaches.     

Solubilization of a water-insoluble dye in aqueous NaBr solutions of alkylpyridinium bromides and its relation to micellar size and shape

In order to investigate the effect of added salt on micelle size, shape, and structure the solubilization of Orange OT in aqueous NaBr solutions of decylpyridinium bromide (DePB), dodecylpyridinium bromide (DPB), tetradecylpyridinium bromide (TPB), and hexadecylpyridinium bromide (CPB) has been examined. The solubilization powers of DePB and DPB micelles increase with increasing NaBr concentration up to 2.86 and 3.07 mol dm^–3, respectively, but above these concentrations remain unaltered. This suggests that spherical micelles of DePB and DPB can have a maximum and constant size at NaBr concentrations higher than these threshold concentrations. On the other hand, the solubilization powers of TPB and CPB micelles increase in the whole range of NaBr concentration studied. The dependencies of the solubilization powers of their micelles on the counterion concentration change at 0.10 and 0.03 mol dm^–3 NaBr, respectively, as suggests that TPB and CPB micelles undergo the sphere–rod transition at those concentrations. Orange OT is a more suitable probe for detecting the presence of the maximum- and constant-size spherical micelle than Sudan Red B.