Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.     

Thermodynamic properties of some N-alkyl-N-methylpiperidinium chlorides and N-alkylpiperidine hydrochlorides in water

Densities and heat capacities at 25°C were measured for N-octyl-, N-decyl- and N-dodecyl-N-methylpiperidinium chlorides and for N-octyl- and N-dodecylpiperidine hydrochlorides in water as functions of concentration. Enthalpies of dilution at 25°C and osmotic coefficients at 37°C of the N-methyl-N-alkylpiperidinium chlorides were also measured as functions of concentration. The partial molar volumes, heat capacities, relative enthalpies, nonideal Gibbs energies and entropies at 25°C were derived as functions of the surfactant concentration. By increasing the alkyl chain length of the surfactant, both the apparent molar volume vs. concentration curves are shifted toward greater values while the corresponding ones for the heat capacity are moved toward more negative values. These results are consistent with the higher hydrophobicity the longer the alkyl chain of the surfactant is. In the micellar region, the entropy and enthalpy vs. log m/m _cmc curves increase in a parallel manner by decreasing the alkyl chain length of the surfactant. Consequently, the negligible effect of the hydrophobicity of the surfactant on the Gibbs energy vs. log m/m _cmc trends is due to the enthalpy-entropy compensative effect. The thermodynamic functions of micellization were graphically evaluated on the basis of the pseudo-phase transition model. The absolute values of both the volume and heat capacity of micellization increase with an increasing number of carbon atoms in the alkyl chain (n _c ). The enthalpy and entropy of micellization vs. n _c are convex curves. Comparisons are also made between the present data and those of some alkylpyridinium chlorides reported elsewhere.     

Effect of homologous series of alkyl sulfate surfactants on the emulsion polymerization of styrene. I. Equal total concentrations

There is evidence in the literature that the rates of emulsion polymerization increase by a large factor as the alkyl chain length increases for a homologous series of surfactants. However, the area occupied by a surfactant molecule in a saturated monolayer at the polystryene/water interface is independent of chain length for alkyl sulfates so that, on the basis of Gardon's theory, equal rates of polymerization would be expected when equal concentrations of surfactants are used. There is a large increase in the number of polymer latex particles formed and in the rate of emulsion polymerization as the surfactant concentration is increased through the critical micelle concentration; this accounts for the large increases reported, because the lower members of the homologous series are below their critical micelle concentrations in most of the published studies. When a common concentration is chosen that is above the critical micelle concentration even for the lowest member of the series, only a relatively small increase in latex particle number and rate of emulsion polymerization with alkyl chain length of the surfactant is observed. This is attributable to an increase in the concentration of surfactant micelles. Good agreement with Gardon's theory is obtained when the concentration of micellar surfactant is used instead of the total surfactant concentration.     

The structure of mixed nonionic surfactant monolayers at the air-water interface: the effects of different alkyl chain lengths

The structure of mixed nonionic surfactant monolayers of monodecyl hexaethylene glycol (C10E6) and monotetradecyl hexaethylene glycol (C14E6) adsorbed at the air-water interface has been determined by specular neutron reflectivity. Using partial isotopic labeling (deuterium for hydrogen) of the alkyl and ethylene oxide chains of each surfactant, the distribution and relative positions of the chains at the interface have been obtained. The packing of the two different alkyl chain lengths results in structural changes compared to the pure surfactant monolayers. This results in changes in the relative positions of the alkyl chains and of the ethylene oxide chains at the interface. The role of the alkyl chain length is contrasted with that of the ethylene oxide chain length, determined from results reported previously on the nonionic surfactant mixture of monododecyl triethylene glycol (C12E3) and monododecyl octaethylene glycol (C12E8).     

Effects of Mixed Anionic-Cationic Surfactants and Alcohol on Solubilization of Water-in-oil Microemulsions

The solubilization of water in w/o microemulsions formed with mixed-surfactants containing one anionic and one cationic surfactant and alcohol was studied as a function of alkyl chain length of oil (C6 to C16), mixed-surfactant (sodium dodecyl sulfate, SDS, and cetyltrimethylammonium bromide, CTAB, or cetylpyridinium bromide CPB), and alcohol (1-butanol, 1-pentanol, 1-hexanol). The results show that the solubilization of water in microemulsion systems increases significantly with the mixed-surfactants due to the synergistic effect resulting from the strong Coulombic interactions between cationic and anionic surfactants and the solubilizing efficiency increases as the chain length or concentration of alcohol increases. With increasing the oil chain length the solubilization for water increases, decreases, and has the chain length compatibility effect when the systems contain 1-hexanol, 1-butanol, 1-pentanol, respectively. The total solubilizing capacity increases as the surfactant concentration (keep the ratio of SDS to butanol constant) increases.     

STRUCTURE AND MORPHOLOGY CHANGES OF HYDROBIOTITES MODIFIED BY CATIONIC SURFACTANTS

In this study, X-ray diffraction （XRD）, Fourier transform infrared spectrometer （FTIR） together with Scanning probe microscopy （SPM） were used to characterize the structure and morphology of the complexes, where the hydrobiotites （Xinfiang） were modified by single-chain surfactants octyltrimethylammonium bromide （OTMA） and octadecyltrimethylammonium bromide （ODTMA）. XRD patterns showed that the structure of complexes was significantly influenced by the surfactant concentration and the alkyl chain length, because obvious changes took place in the basal spacing. Furthermore, according to the XRD results, several arrangements of surfactant molecules within the hydrobiotite interlayer space were deduced. The FTIR spectrum indicated that the surfactant contents in complexes dramatically increased with the alkyl chain length. The SPM micrographs demonstrated that the surfaces of complexes prepared at lower surfactant concentration were relatively flat compared with that prepared at higher concentration, while those with higher surfactant concentration had much steeper surface due to the alkyl chain length. It was concluded that structure and morphology of surfactant/hydrobiotite complexes depend not only on the surfactant concentration, but also strongly on the surfactant species.     

Partition coefficients of nonionic surfactants in water/n-alkane systems

In water/oil systems, surfactants partition between the water phase and the oil phase according to their solubility in both phases. The ratio between the concentration of the surfactant in the oil phase and in the water phase at equilibrium is known as the partition or distribution coefficient (K(p)). The partition coefficient (K(p)) is an important fundamental parameter essential to understanding and controlling phenomena in water-oil-surfactant systems under both equilibrium and non-equilibrium conditions. In the present work we report on the partitioning of three different classes of nonionic surfactants in the pre-cmc regime, namely polyoxyethylene alkyl ethers (C(i)E(j)), alkyl dimethyl phosphine oxides (C(n)DMPO) and alkyl glycosides (β-C(n)G(m)) between water and different n-alkanes. We focus on the influence of the surfactant's molecular structure (alkyl chain length, head group size and type), and oil chain length on K(p) to derive systematic structure-property relationships. Moreover, we discuss the influence of the surfactant purity on partition coefficients of technical grade alkyl glycosides and polyoxyethylene alkyl ethers, respectively.     

Preparation and characterization of zwitterionic surfactant-modified montmorillonites

A series of zwitterionic surfactant-modified montmorillonites (ZSMMs) were synthesized using montmorillonite and three zwitterionic surfactants with different alkyl chain lengths at different concentrations [0.2-4.0 cation exchange capacity (CEC)]. These ZSMMs were characterized by X-ray diffraction (XRD), thermo-gravimetric analysis and differential thermo-gravimetric (TG/DTG) analyses. The zwitterionic surfactant could be intercalated into the interlayer spaces of montmorillonites and causing interlayer space-swelling. From XRD measurements, the amount of the surfactants loaded and the basal spacing increased with surfactant concentration and alkyl chain length. One endothermic DTG peak occurred at ~390 °C, which was assigned to the decomposition of the zwitterionic surfactant on the organo-montmorillonites from 0.2 to 0.6 CEC. When the surfactant loading was increased, a new endothermic peak appeared at ~340 °C. From the microstructures of these ZSMMs, the mechanism of zwitterionic surfactant adsorption was proposed. At relatively low loadings of the zwitterionic surfactant, most of surfactants enter the spacing by an ion-exchange mechanism and are adsorbed onto the interlayer cation sites. When the concentration of the zwitterionic surfactant exceeds the CEC of montmorillonite, the surfactant molecules then adhere to the surface-adsorbed surfactant. Some surfactants enter the interlayers, whereas the others are attached to the clay surface. When the concentration of surfactant increases further beyond 2.0 CEC, the surfactants may occupy the inter-particle space within the house-of-cards aggregate structure.     

Interfacial tension between water and high pressure CO2 in the presence of hydrocarbon surfactants

Interfacial tension of water–CO₂ interface was measured by pendant drop method in the presence of a surfactant of various concentrations. The surfactants used were three surfynols which are non-ionic blanched hydrocarbon with different length of the alkyl side chain. Prior to the interfacial tension measurements, the solubility of the surfynols in CO₂ were determined from cloud point method. The measured interfacial tensions indicated that an addition of small amount surfactant did reduce the interfacial tension. The interfacial activities of surfactants were evaluated from the slope of the interfacial tension reduction curve against the surfactant concentration and rationalized in terms of the molecular natures such as hydrophobic alkyl chain length.     

Removal of solvent-based ink from printed surface of HDPE bottles by alkyltrimethylammonium bromides: effects of surfactant concentration and alkyl chain length

Three alkyltrimethylammonium bromides (i.e., dodecyl-, tetradecyl-, and hexadecyltrimethylammonium bromide or DTAB, TTAB, and CTAB, respectively) were used to remove a blue solvent-based ink from a printed surface of high-density polyethylene bottles. Either an increase in the alkyl chain length or the surfactant concentration was found to increase the deinking efficiency. Complete deinking was achieved at concentrations about 3, 8, and 24 times of the critical micelle concentration (CMC) of CTAB, TTAB, and DTAB, respectively. For CTAB, ink removal started at a concentration close to or less than its CMC and increased appreciably at concentrations greater than its CMC, while for TTAB and DTAB, significant deinking was only achieved at concentrations much greater than their CMCs. Corresponding to the deinking efficiency of CTAB in the CMC region, the zeta potential of ink particles was found to increase with increasing alkyl chain length and concentration of the surfactants, which later leveled off at some higher concentrations. Wettability of the surfactants on an ink surface increased with increasing alkyl chain length and concentration of the surfactants. Lastly, solubilization of ink binder in the surfactant micelles was found to increase with increasing alkyl chain length and surfactant concentration. We conclude that adsorption of surfactant on the ink pigment is crucial to deinking due to modification of wettability, zeta potential, pigment/water interfacial tension, and dispersion stability. Solubilization of binder (epoxy) into micelles is necessary for good deinking because the dissolution of the binder is required before the pigment particles can be released from the polymer surface.     

Influence of alkyl chain length of alpha olefin sulfonates on surface and interfacial properties

Alpha olefin sulfonates (AOS) with various alkyl chain lengths have been used to investigate the influence of alkyl chain length on the interfacial properties at air–water, liquid paraffin–water, and parafilm–water interfaces. It was found that the critical micelle concentration decreased with increasing alkyl chain length, while the efficiency of reducing surface tension was inverse relationship with alkyl chain length. The diffusion coefficient obviously reduced with an increase of surfactant concentration and alkyl chain length. The C_14-16AOS shows better wettability and emulsification than C_16-18AOS and C_20-24AOS. For foaming properties, the foamability and foam stability dramatically decreased with increasing alkyl chain length.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Phase behavior of monoglycerol fatty acid esters in nonpolar oils: reverse rodlike micelles at elevated temperatures

We have studied nonaqueous phase behavior and self-assemblies of monoglycerol fatty acid esters having different alkyl chain lengths in different nonpolar oils, namely, liquid paraffin (LP 70), squalane, and squalene. At lower temperatures, oil and solid surfactants do not mix at all compositions of mixing. Upon an increase in the temperature of the surfactant system, the solid melts to give isotropic single or two-liquid phases, depending on the nature of the oil and the surfactant. All monolaurin/oil systems form an isotropic single-phase liquid, but with a decreasing alkyl chain length of surfactant, they become less lipophilic and immiscible in oils. As a result, a two-phase domain is observed in the oil rich region of all monocaprylin/oil systems over a wide range of concentrations. Judging from the phase diagrams, the surfactants are the least miscible with squalane, and the order of miscibility tendency is squalene > LP 70 > squalane. With a further increase of temperature, the solubility of the surfactant in the oil increases, and the two-liquid phase transforms to an isotropic single phase. This phase transformation corresponds to the reverse of the cloud-point phenomenon observed in aqueous nonionic surfactant systems. Small-angle X-ray scattering (SAXS) measurements show the presence of reversed rodlike micelles in the isotropic single phase, and the length of the aggregates decreases with increasing temperature and increasing alkyl chain length of the surfactant. These results indicate a rod-sphere transformation with increasing lipophilicity of the surfactant and confirms the validity of Ninham's penetration model in the reversed system. An addition of a small amount of water dramatically enhances the elongation of the reverse micelles. Increasing the surfactant concentration or changing the oil from squalene to LP 70 also increases the length of the rodlike aggregates.     

Effect of pH on the binding of alkyl sulfates to gelatin

A surfactant-selective eletrode in which the membrane is an o-nitrotoluene phase containing a dissolved complex of cetyltrimethylammonium-dodecyl sulfate has been applied to investigations of the interaction between gelatin and alkyl sulfates as well as gelatin and alkyltrimethylammoniumions in dilute aqueous solutions.The binding isotherms were obtained by comparing emf-values obtained for surfactant in water to the electrode potentials in gelatin solutions plotted in terms of surfactant concentration.The binding of alkyl sulfates was measured as a function of pH at constant free surfactant concentration. At pH values 7 the degree of binding is indpendent of the pH of the solution. The level of binding of alkyl sulfates to gelatin increases strongly with increasing chain length of the alkyl sulfate. At pH values 6 the extent of binding increases steeply with decreasing pH. Octyl sulfate shows a very low level of binding even at low pH. Cationics show much weaker interactions with gelatin than anionic surfactants of comparable alkyl chain length.     

Equilibrium and dynamic surface properties of long-chain quaternary ammonium hydroxides with different chain length and number

The equilibrium and dynamic surface tensions of five long-chain alkyl ammonium hydroxides (AAH) at the air/aqueous solution interface were investigated, and the effects of the length and number of alkyl chain on surface tensions had been discussed. With the increase of the length, the equilibrium surface tension (EST) increased from 28.65 to 40.52?mN/m. While, for the double chains at the critical micelle concentration (CMC), the EST decreased from 32.71 to 26.61?mN/m with the length increasing. In addition, the adsorption behaviors of the AAH were analyzed and the effective diffusion coefficients (D_eff) were calculated on basis of the Ward–Tordai equation. Moreover, the time required to attain the EST decreases with the increase of surfactant concentration. The longer the C–H chain is, the lower surface tension at initial concentration is. What’s more, the diffusion processing of the AAH to air/water interface mainly depends on the surfactant concentration, and the adsorption is controlled by diffusion mechanism in a dilute concentration, while under a high concentration the adsorption is controlled by mixed diffusion–kinetic mechanism.     

Volumetric properties of sodium perfluoroalkylcarboxylates in aqueous solutions at different temperatures

Densities and sound velocities of sodium perfluorohexanoate and sodium perfluorononanoate for different concentrations above and below the critical micelle concentration (cmc) have been obtained at different temperatures. Apparent molar volumes and compressibilities of the surfactants in the monomeric and micellar form have been estimated. The relevant results were plotted as a function of the temperature and the alkyl chain length by using previous data reported for sodium heptanoate and sodium octanoate. The expected linear behaviour in function of temperature and also alkyl chain length have been found. In order to analyze the influence of the substitution of the hydrogen by fluorine in the alkyl chain of the surfactant, the data were compared with the hydrogenated counterpart.     

Evidence of higher complexes between cucurbit[7]uril and cationic surfactants

The host-guest assembly of CB7 with a series of alkyl(trimethyl)ammonium (C(n)TA(+)) surfactants of different chain lengths (n=6-18) has been studied. The complexation behaviour was investigated by NMR spectroscopy, isothermal titration calorimetry and kinetics measurements. The combined results of these techniques provided evidence for the formation of 1:1 inclusion and 2:1 external complexes in the cases of C(n)TA(+) with n=12-18. The binding constants for the 1:1 complexes are independent of the alkyl chain length of the surfactant, whereas a relationship between K(2:1) and the chain length of the surfactant was found for the 2:1 complexes.     

Solution properties of mixed surfactant systems (IV)

Electric properties of mixed anionic-nonionic surfactant systems in aqueous solutions above the CMC have been studied in terms of pNa values, electrical conductivities, and dielectric constants; these systems are sodium 3, 6, 9-trioxaicosanoate (ECL) — alkyl polyoxyethylene ethers (C_mPOE; m=12, 14, 16, and 18). The degree of ionic dissociation of mixed micelle increases with increasing the number of carbon atoms of the alkyl group in the nonionic surfactant. The electrical conductivity increases with increasing the alkyl chain length in the nonionic surfactant, in spite of the increase of the activation energy for conduction. The size of mixed micelles also increases with increasing alkyl chain length. This may be attributed to the fact that the mixed micelle is formed more easily by a nonionic surfactant including long alkyl chains than for one having shorter alkyl chains.     

Sugar-based gemini surfactants with peptide bonds-synthesis, adsorption, micellization, and biodegradability

The sugar-based gemini surfactant with peptide bonds, N,N'-bisalkyl-N,N'-bis[2-(lactobionylamide)ethyl]hexanediamide (2C(n)peLac, in which n represents hydrocarbon chain lengths of 12 and 16), was synthesized by reacting adipoyl chloride with the corresponding monomeric surfactant N-alkyl-N'-lactobionylethylenediamine (C(n)peLac), which was obtained by reacting ethylenediamine with alkyl bromide and lactobionic acid. The adsorption and micellization properties of C(n)peLac and 2C(n)peLac were characterized by the measurement of their equilibrium and dynamic surface tension, steady-state fluorescence using pyrene as a probe, dynamic light scattering (DLS), and time-resolved fluorescence quenching (TRFQ), and their biodegradability was also investigated. The critical micelle concentration (cmc) decreases with an increase in the hydrocarbon chains from monomeric to gemini surfactants, whereas it increases with an increase in the chain length from 12 to 16 for both systems. The increases in both the hydrocarbon chain and the chain length of sugar-based surfactants reduce surface activities such as the ability to lower the surface tension, the occupied area per molecule, and the adsorption rate at the air/water interface. The sugar-based surfactants C(n)peLac and 2C(n)peLac exhibit unique aggregation behavior in aqueous solution. The DLS results indicate that the apparent hydrodynamic diameter of C(n)peLac micelles decreases sharply with increasing concentration, whereas that of 2C(n)peLac micelles decreases gradually. From the TRFQ measurement, it was observed that, as concentration increases, the aggregation numbers are almost constant for C(n)peLac, whereas they increase for 2C(n)peLac. These results imply that loosely packed micelles formed by sugar-based surfactants become tightly packed micelles as the concentration increases. Furthermore, it was found that 2C(n)peLac shows lower biodegradability than does C(n)peLac because it contains tertiary amines in the molecule.     

Heat capacities,volumes and solubilities of pentanol in aqueous alkyltrimethylammonium bromides

Apparent molar heat capacities and volumes of pentanol, 0.05m in decyl-, tetradecyl- and hexadecyltrimethylammonium bromides micellar solutions, were measured at 25°C. They were assumed to approach the standard infinite dilution values and rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase, heat capacity, and volume of pentanol in both phases are simultaneously derived. The present results show that the volume of the micellar core does not seem to have a significant effect on the apparent molar volume and heat capacity of pentanol in the micellar phase and on the free energy of transfer of pentanol from the aqueous to the micellar phase. We report an equation correlating the free energy of transfer of alcohols in alkyltrimethylammonium bromides as a function of the number of carbon atoms in the alcohol and surfactant alkyl chain. Also, the apparent molar heat capacities of pentanol in micellar solutions as a function of surfactant concentration show evidence of two maxima, which, by increasing the alkyl chain length of surfactant display an opposite dependence on concentration. The second maximum can be attributed to a sphere to rod transition. The second transition was also found in the case of butoxyethanol in hexadecyltrimethylammonium bromide. It is more difficult to explain the nature of the first maximum although an attempt is made.