Study on the Polarity of bmimPF6/Tween80/toluene Microemulsion Characterized by UV-Visible Spectroscopy

With the aid of nonionic surfactant Tween80, the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆) forms nonaqueous microemulsions with toluene. The phase diagram of the ternary system was prepared at 25°C. It was demonstrated that there were a single-phase region and a two-phase region in the ternary phase diagram. The single-phase region could be further divided into toluene-in-bmimPF₆, bicontinuous and bmimPF₆-in-toluene microemulsion regions by electrical conductivity. And by the use of methyl orange as an absorption probe, the polarity of the bmimPF₆-in-toluene microemulsion was probed by UV-vis spectroscopy. A relatively constant polarity of the microemulsion droplets is obtained in the bmimPF₆ microemulsion.     

FTIR study of Tween80/1-butyl-3-methylimidazolium hexafluorophosphate/toluene microemulsions

With the aid of Tween80, an environmentally benign nonionic surfactant applied to medicine and food industry, the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆) formed IL microemulsions with toluene. The phase diagram of the ternary system was prepared at 25 °C. It was demonstrated that there were a single-phase region and a multiple phase region in the ternary phase diagram. The single-phase region could be further divided into toluene-in-bmimPF₆, bicontinuous, and bmimPF₆-in-toluene microemulsion regions by electrical conductivity. In particular, the microstructural characteristics of the microemulsions were investigated by Fourier transform infrared spectroscopy. The results indicated that it was the hydrogen-bonded interactions between bmimPF₆ and Tween80 that might be the driving force for the solubilization of bmimPF₆ into the core of the Tween80 aggregates.     

Studies on the micropolarities of bmimBF4/TX-100/toluene ionic liquid microemulsions and their behaviors characterized by UV-visible spectroscopy

Ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), were substituted for polar water and formed nonaqueous microemulsions with toluene by the aid of nonionic surfactant TX-100. The phase behavior of the ternary system was investigated, and microregions of bmimBF4-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF4 (O/IL) were identified by traditional electrical conductivity measurements. Dynamic light scattering (DLS) revealed the formation of the IL microemulsions. The micropolarities of the IL/O microemulsions were investigated by the UV-vis spectroscopy using the methyl orange (MO) and methylene blue (MB) as absorption probes. The results indicated that the polarity of the IL/O microemulsion increased only before the IL pools were formed, whereas a relatively fixed polar microenvironment was obtained in the IL pools of the microemulsions. Moreover, UV-vis spectroscopy has also shown that ionic salt compounds such as Ni(NO3)2, CoCl2, CuCl2, and biochemical reagent riboflavin could be solubilized into the IL/O microemulsion droplets, indicating that the IL/O microemulsions have potential application in the production of metallic or semiconductor nanomaterials, and in biological extractions or as solvents for enzymatic reactions. The IL/O microemulsions may have some expected effects due to the unique features of ILs and microemulsions.     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表面活性剂, 以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂, 对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验, 绘制了不同条件下Tween80离子液体的微乳体系的拟三元相图, 考察了醇的种类、含量对单相微乳区的影响, 并用电导法研究了在乙醇为助表面活性剂情况下, 单相微乳区的结构转变. 结果表明, 当醇(异戊醇)固定时, 随着表面活性剂/醇的质量比增加, 单相微乳区的面积逐渐增大; 不同链长的直链醇对单相微乳区的面积影响与该醇在离子液体中的溶解情况有关, 单相微乳区的面积随着直链醇链长的增加而越小; 当乙醇作助表面活性剂时, 所得到的单相微乳区的面积最大, 且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构. 尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释, 这一现象是由于油主要起到减少离子液体中离子对或离子的积聚, 提高带电离子淌度的作用.     

Microregion detection of ionic liquid microemulsions

Nonaqueous ionic liquid (IL) microemulsion consisting of IL, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), surfactant TX-100, and toluene was prepared and the phase behavior of the ternary system was investigated. Electrical conductivity measurement was used for investigating the microregions of the nonaqueous IL microemulsions. On the basis of the percolation theory, the bmimBF(4)-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF(4) (O/IL) microregions of the microemulsions were successfully identified using insulative toluene as the titration phase. However, this method was invalid when conductive bmimBF(4) acted as the titration phase. The microregions obtained by conductivity measurements were further proved by electrochemical cyclic voltammetry experiments. The results indicated that the conductivity method was feasible for identifying microstructures of the nonaqueous IL microemulsions.     

Research on electrochemical properties of nonaqueous ionic liquid microemulsions

The nonaqueous ionic liquid (IL) microemulsions composed of 1-butyl-3-methylimidazolium tetrafluoroborate, Triton X-100, and toluene were prepared and the electrochemical properties of the nonaqueous IL microemulsions were investigated in this paper. It is shown that characteristics of the nonaqueous IL microemulsions such as electrical conductivity, electrochemical window, and solubility are good, which indicate that the nonaqueous IL microemulsions can be used as electrolyte for electrochemical research. The electrochemical properties of the nonaqueous IL microemulsions were researched by cyclic voltammetry (CV) and electrochemical impedance spectroscopy methods using potassium ferricyanide as electroactive probe. It was found that the reversibility was better and the peak current densities of CV were higher for the [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ electrode reaction in the nonaqueous IL microemulsions than those in IL. However, the electrochemical behavior of the probe in the nonaqueous IL microemulsions with different microenvironments (oil-in-IL, IL-in-oil, and bicontinuous) was different. The electrochemical property of the probe in the oil-in-IL microemulsion was the best, which was studied in detail.     

Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.     

Nonaqueous microemulsion-containing ionic liquid [bmim][PF6] as polar microenvironment

The phase behavior of toluene/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]) was studied. It was demonstrated that the single-phase microemulsion area covered about 75% of the phase diagram at 25 °C. Electrical conductivities of the system with different w ([bmim][PF6]-to-TX-100 molar ratio) values were determined, and the results were used to locate the sub-regions of the single-phase microemulsion. The results showed that a transform from [bmim][PF6]-in-oil ([bmim][PF6]/O) microstructure via a bicontinuous region to an oil-in-[bmim][PF6] (O/[bmim][PF6]) microstructure occurred with the increase of Φ (weight fraction of TX-100 and [bmim][PF6] in the system). The aggregate size of the reverse microemulsions of [bmim][PF6]/O was determined using small-angle X-ray scattering. The results showed that the size of the reverse microemulsions depended markedly on the w values.     

Effect of polyethylene glycol (PEG-400) on the 1-butyl-3-methylimidazolium tetrafluoroborate-in-cyclohexane ionic liquid microemulsion

The effect of a common polymer, polyethylene glycol with molecular weight of 400 (PEG-400) on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF₄)/Triton X-100/cyclohexane ionic liquid (IL) reverse microemulsion has been investigated. The addition of PEG-400 leaded to the linear increase of the microemulsion droplet size, in accordance with the observation of dispersed phase, showing that PEG-400 was only solubilized into the polar interior of the IL microemulsions. FTIR spectroscopic analysis indicated that the addition of PEG-400 decreased the electrostatic interaction between the oxygen atoms of OE units and the positive electrical charged imidazolium cation of bmimBF₄. At the same time, the oxygen atoms of PEG-400 can also interact with the imidazolium cation. These results suggested that small amounts of PEG-400 entered the palisade layers of the IL microemulsion. The conductivity of the IL reverse microemulsions was decreased owing to the dilution of conducting polar cores by the addition of insulative PEG-400, indicating that PEG-400 was only solubilized into the reverse IL microemulsion interior. The conclusion was further supported by viscosity measurement.     

Microstructure and structural transition in palm-kernel oil microemulsion using 1.5-order differential electroanalysis

The microemulsification in palm-kernel oil/cetyltrimethylammonium bromide/iso-pentanol/water system is investigated. The effect of iso-pentanol concentration in microemulsions on the size of single-phase microemulsion region is also discussed. It is found that the maximum microemulsion domain is obtained when iso-pentanol-to-cetyltrimethylammonium bromide mass ratio is 1.75. The diffusion coefficients of electroactive probe (ferrocene) in microemulsion microenvironment are measured by 1.5-order differential electroanalysis. The microstructure and structural transition from water-in-oil to oil-in-water microemulsions through a bicontinuous structure is examined. The results are found to be in agreement with that of conductivity measurements.     

The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.     

Microstructure of microemulsion modified with ionic liquids in microemulsion electrokinetic chromatography and analysis of seven corticosteroids

In this work, the influences of ionic liquid (IL) as a modifier on microemulsion microstructure and separation performance in MEEKC were investigated. Experimental results showed that synergetic effect between IL 1‐butyl‐3‐methylimidazolium tetrafluoro‐borate (BmimBF₄) and surfactant SDS gave a decreased CMC. With increment of IL in microemulsion, negative ζ potential of the microdroplets reduced gradually. The influence of IL on the dimensions of microdroplet was complicated. At BmimBF₄ less than 8 mM, IL made microemulsion droplet smaller in size. While at BmimBF₄ more than 10 mM, the size increased and reached to a maximum value at 12 mM, where the microdroplets were larger than that without IL. After that, the micreodroplet size decreased again. Relative fluorescence intensity of the first vibration band of pyrene to the third one (I₁/I₃) enhanced as IL was added to microemulsion, which indicated that this addition increased environmental polarity in the inner core of microdroplets. Prednisone, hydrocortisone, prednisolone, hydrocortisone acetate, cortisone acetate, prednisolone acetate, and triamcinolone acetonide were analyzed with MEEKC modified with IL to evaluate the separation performance. Cortisone acetate and prednisolone acetate could not be separated at all in typical microemulsion. The seven analytes could be separated by the addition of 10 mM BmimBF₄ into the microemulsion system. The method has been used for analysis of corticosteroids in cosmetic samples with simple extraction; the recoveries for seven analytes were between 86 and 114%. This method provides accuracy, reproducibility, pretreatment simplicity, and could be applied to the quality control of cosmetics.     

Extraction of uranium(VI) from nitric acid medium by 1.1M tri-n-butylphosphate in ionic liquid diluent

Summary A systematic study on the extraction of U(VI) from nitric acid medium by tri-n-butylphosphate (TBP) dissolved in a non-traditional diluent namely 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆) ionic liquid (IL) is reported. The results are compared with those obtained using TBP/n-dodecane (DD). The distribution ratio for the extraction of U(VI) from nitric acid by 1.1M TBP/bmimPF₆ increases with increasing nitric acid concentration. The U(VI) distribution ratios are comparable in the nitric acid concentration range of 0.01M to 4M, to the ratios measured using 1.1M TBP/DD. In contrast to the extraction behavior of TBP/DD, the D values continued to increase with the increase in the concentration of nitric acid above 4.0M. The stoichiometry of uranyl solvate extracted by 1.1M TBP/IL is similar to that of TBP/DD system, wherein two molecules of TBP are associated with one molecule of uranyl nitrate in the organic phase. Ionic liquid alone also extracts uranium from nitric acid, albeit to a small extent. The exothermic enthalpy accompanying the extraction of U(VI) in TBP/bmimPF₆ decreases with increasing nitric acid and with TBP concentrations.     

Fluorimetric and conductometric study of water—n-octane—sodium dodecyl sulfate—n-pentanol microemulsions

The influence of the water concentration in the water—n-octane—sodium dodecyl sulfate—n-pentanol microemulsions on the polarity index I ₁/I ₃, the efficiency of formation of the fluorescent probe (pyrene) excimers I _ex/I _m, and the conductivity of the system in a wide interval of water—oil ratios was studied. Analysis of changes in the polarity index shows that in all types of the microemulsions pyrene is solubilized in the hydrophobic part of the water—oil interface between the surfactant hydrocarbon radicals. Depending on the water—oil ratio, the site of its localization changes, and the effective permittivity of the medium _eff varies from 5 to 11. Variations of the conductivity and polarity index allow one to observe three structures in the mucroemulsion, viz., water—oil, bicontinual region, and oil—water. Variation of the I _ex/I _m ratio reveals only the transition from the water—oil microemulsion to the oil—water microemulsion.     

Role of solubilized water in the reverse ionic liquid microemulsion of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) can form nonaqueous microemulsions with benzene by the aid of nonionic surfactant TX-100. The effect of water on ionic liquid-in-oil (IL/O) microemulsions was studied, and it was shown that the addition of small amount of water to the IL microemulsion contributed to the stability of microemulsion and thus increased the amount of solubilized bmimBF4 in the microemulsion. The conductivity measurements also showed that the attractive interactions between IL microdroplets were weakened, that is, the IL/O microemulsion becomes more stable in the present of some water. Fourier transform IR was carried out to analyze the states of the added water, and the result showed that these water molecules mainly behaved as bound water and trapped water, indicating that the water molecules are located in the palisade layers of the IL/O microemulsion. Furthermore, 1H NMR and 19F NMR spectra suggested that the added water molecules built the hydrogen binding network of imidazolium cations and H2O, BF4- anion and H2O, and at the same time the electronegative oxygen atoms of the oxyethylene units of TX-100 and water in the palisade layers, which made the palisade layers more firm and thus increased the stability of the microemulsion. The study can help in further understanding the formation mechanism of microemulsions. In addition, the characteristic solubilization behavior of the added water can provide an aqueous interface film for hydrolysis reactions and therefore may be used as an ideal medium to prepare porous or hollow nanomaterials.     

Effect of the structures of microemulsions on chemical reactions

Two kinds of chemical reactions were studied in two different microemulsion systems: cetyltrimethylammonium bromide/1-butanol/10 and 25% n-octane/water and sodium dodecyl sulfonate/1-butanol/20% styrene/water. One reaction is a hydrolysis reaction, in which aspirin and 2,4-dinitrochlorobenzene were used as the hydrolysis substrates. The second reaction is the polymerization of styrene, which was initiated by using two initiators, water-soluble K₂S₂O₈ and oil-soluble 2,2′-azobis(isobutyronitrile), and, at the same time, the polymerization of acrylamide, which was initiated by NaHSO₃, was also studied. All the hydrolysis reaction experimental results show that the hydrolysis is greatly affected by the structures and the structural transitions of microemulsions. The hydrolysis rates are higher in water-in-oil (W/O) microemulsion media and decrease with the addition of water. The rates increase in bicontinuous (BC) microemulsions and decrease in oil-in-water (O/W) microemulsions. The transition points of the hydrolysis rates occurred at the two microemulsion structural transition points from W/O to BC and from BC to O/W. The polymerization relationships between the conversions of styrene, the molecular weights of polystyrene and the water contents of the microemulsion system were obtained. The effects of microemulsion structures on the sizes of the polystyrene particles and on the molecular weights of the polymers are discussed. Polystyrene particles with diameters of 10–60 nm were observed by microscopy. Our experimental polymerization results show that microemulsions are suitable as media for the production of polymers, the molecular weights and the particle sizes of which can be controlled and predicted by variations in microemulsion structures. Received: 11 July 1999/Accepted: 26 July 1999     

A novel water-in-ionic liquid microemulsion and its interfacial effect on the activity of laccase

It is of great significance to develop an appropriate water-in-ionic liquid (W/IL) microemulsion suitable for the expression of the catalytic activity of a given enzyme. In this paper, the phase diagram of a new AOT/Triton X-100/H(2)O/[Bmim][PF(6)] pseudo ternary system is presented. With the aid of nonionic surfactant Triton X-100, AOT could be dissolved in hydrophobic ionic liquid [Bmim][PF(6)], forming a large single phase microemulsion region. The water-in-[Bmim][PF(6)] (W/IL) microemulsion domain was identified electrochemically by using K(3)Fe(CN)(6) as a probe. The existence of W/IL microemulsions was demonstrated spectrophotometrically by using CoCl(2) as a probe. New evidences from the FTIR spectroscopic study, which was first introduced to the W/IL microemulsion by substituting D(2)O for H(2)O to eliminate the spectral interference, demonstrated that there existed bulk water at larger ω(0) values (ω(0) was defined as the molar ratio of water to the total surfactant) in the W/IL microemulsion, which had remained unclear before. In addition to the inorganic salts, biomacromolecule laccase could be solubilized in the W/IL microemulsion. The laccase hosted in the microemulsion exhibited a catalytic activity and the activity could be regulated by the composition of the interfacial membrane.     

Kinetics for the Reaction between Potassium Ferricyanide and Cobalt Chloride in Aqueous Solution and Microemulsion

The kinetics for the reaction between potassium ferricyanide (K₃Fe(CN)₆) and cobalt chloride (CoCl₂) in aqueous solution and water/bis(2-ethylhexyl) sodium sulfosuccianate (AOT)/isooctane microemulsions were studied by three-wavelength spectrophotometry at 298.2 K. The second-order rate constants (k₂) were calculated from the time dependence of the concentration of reactant K₃Fe(CN)₆. The result showed that the reaction rates in water/AOT/isooctane microemulsions were slower than that in the aqueous solution, and k₂ decreased with molar ratio (ω) of water to AOT in microemulsions, which was interpreted by the transition state theory and confirmed that the reaction took place at the interfaces of the microemulsion water pools.     

Bulk Properties of n-Heptane–Water–Sodium Dodecyl Sulfate–n-Pentanol Microemulsions

The density, isothermal compressibility, and thermal expansion coefficient of macroscopically single-phase n-heptane–water–sodium dodecyl sulfate–n-pentanol microemulsions are measured by a precision dilatometric method at 25°C. The internal pressure and molar volume of the investigated microemulsion systems are calculated. It was shown that the bulk properties of direct microemulsions with various contents of the dispersed phase markedly differ.     

Microemulsions of triglyceride and non-ionic surfactant — effect of temperature and aqueous phase composition

The phase behavior of soybean oil, polyoxyethylene (40) sorbitol hexaoleate and water—ethanol was investigated. Regions of water-in-oil (W/O) microemulsions were determined and were found to be strongly dependent on temperature and water:alcohol ratios. At a water:ethanol ratio of 80/20 (wt.%), an oil:surfactant ratio of 2/3 and a temperature of 25°C, the microemulsion region extended continuously from the oil—surfactant axis to the phase diagram center. However, at the hydrophilic—lipophilic balance (HLB) temperature (20–22°C) and a water:ethanol ratio of 80/20 or 75/25 (wt.%), a single-phase area separated from the original microemulsion region. Conductivity measurements and dynamic light scattering intensifies at 25°C indicated that association structures were formed with increasing aqueous phase concentrations above 15 wt.%. At 20°C, the single-phase scattering intensifies increased sharply with increasing aqueous phase concentrations (38–46 wt.%) and a plateau in the conductivity was detected.

Transmission electron microscopy results supported the finding that more particles are formed with increasing aqueous phase and form connected particles, resulting in constant conductance.