Synthesis,characterization and water absorbency properties of poly(acrylic acid)/sodium humate superabsorbent composite

A novel poly(acrylic acid)/sodium humate superabsorbent composite was synthesized by aqueous solution polymerization of acrylic acid using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator in the presence of sodium humate. The effects on water absorbency such as initial monomer concentration, degree of neutralization of acrylic acid, amount of crosslinker, initiator and sodium humate, etc. were investigated. The water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with a sodium humate content of 20% exhibited an absorption of 1268 g H₂O/g sample and 93 g H₂O/g sample in distilled water and in 0.9 wt% NaCl solution, respectively. Swelling rate and water retention tests were also carried out. The results show that sodium humate, as a kind of functional filler, can enhance comprehensive properties of superabsorbent composite and reduce the product cost significantly. Copyright © 2005 John Wiley & Sons, Ltd.     

Graft Copolymerization of Artemisia Seed Gum with Acrylic Acid under Microwave and its Water Absorbency

A super‐absorbent polymer was prepared by grafting copolymerization of acrylic acid onto Artemisia seed gum, using microwave irradiation and ammonium persulfate as an initiator. The effect of various preparation conditions on its water absorbency, such as the ratio of acrylic acid to Artemisia seed gum, degree of acrylic acid neutralization, amount of initiator and microwave irradiation time, was investigated by orthogonal tests. The optimal reaction conditions were 3 min (irradiation time), 70% neutralization degree of acrylic acid and 2% initiator on the basis of the mass of acrylic acid used. When the mass ratio of acrylic acid to Artemisia seed gum is 5:0.5, the product has a water absorbency close to 400 times at room temperature in distilled water, this indicated that is has a high water absorbency. The structure of the graft copolymer was confirmed by Fourier transform infrared spectrometer (FT‐IR) and thermogravimetric analysis (TGA). Further more, this microwave irradiation processing method to prepare water absorbent materials has no industrial cast off produced, that is to say, this method is environmentally friendly.     

Modified carrageenan 3. Synthesis of a novel polysaccharide-based superabsorbent hydrogel via graft copolymerization of acrylic acid onto kappa-carrageenan in air

A novel biopolymer-based superabsorbent hydrogel was synthesized through chemically crosslinking graft copolymerization of acrylic acid (AA) onto kappa-carrageenan (κC), in the presence of a crosslinking agent and a free radical initiator. A proposed mechanism for κC-g-polyacrylic acid was suggested and the affecting variables onto graft polymerization (i.e. the crosslinker, the monomer and the initiator concentration, the neutralization percent and reaction temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Maximum water absorbency of the optimized final product was found to be 789 g/g. The swelling capacity of the synthesized hydrogels was also measured in various salt solutions. The time-temperature profile of the polymerization reaction, in order to investigate the effect of molecular oxygen was conducted in terms of the absence and presence of the atmospheric oxygen. The overall activation energy (E_a) of the graft polymerization reaction was found to be 2.93 KJ/mol.     

PAAM高吸水树脂反相悬浮聚合

采用反相悬浮聚合法,通过部分中和丙烯酸与丙烯酰胺共聚制备了聚(丙烯酸-丙烯酰胺)(PAAM)高吸水树脂,讨论了聚合过程主要影响因素对其吸液性能的影响,并对其进行了FTIR、TGA测试,得到最佳的合成工艺配方:单体质量浓度为30%,中和度N为75%,丙烯酸与丙烯酰胺的摩尔比为7∶3,交联剂、引发剂和分散剂质量浓度分别为0.065%、0.7%和0.5%(相对于单体总质量),单体溶液的滴加速度为2～3mL/min,聚合温度和时间分别为70℃和1.5h。此时在蒸馏水、0.9%NaCl溶液%(wt)中最大吸水倍率分别为Qw=1300g/g、Qs=93g/g(Qw为蒸馏水中吸水倍率,Qs为0.9%NaCl溶液中的吸水倍率,下同),树脂在320℃之前都是比较稳定的,可以适应较高的使用温度。     

Inverse Suspension Polymerization of Partially Neutralized and Lightly Cross-Linked Acrylic Acid: Effect of Reaction Parameters

An inverse suspension polymerization was carried out in laboratory in one Liter Buchi glass reactor to produce superabsorbent polymers (SAPs) based on acrylic monomers for hygiene applications. Strongly water absorbing polymers, based on acrylic acid, sodium acrylate were prepared by copolymerization using potassium per sulfate as initiator and N-N′ methylene-bisacrylamide (MBA) as crosslinking agent. The effect of varying monomer, crosslinker, initiator, dispersant concentration, time of reaction and degree of neutralization, on absorption capacities was investigated. In the present studies, the continuous hydrocarbon phase was taken as 50:50 mixture of n-heptane and cyclohexane (aliphatic-alicyclic) because the availability of crosslinker in the aqueous phase is controlled by the partition coefficient of the crosslinker between the aqueous phase and the continuous hydrocarbon phase. The SAPs were evaluated for their free absorption capacities in distilled water, saline (0.9% NaCl), and also absorption under load (AUL). The experimental results show that these SAPs have good absorbency both in water and NaCl solutions. It was observed that SAP synthesized from acrylic acid with about 70% degree of neutralization, containing 1% cross-linker, and 0.5–1.0% initiator concentration with 10% dispersant exhibited absorption capacities in water, saline and AUL as 220 g/g, 70 g/g and 27 g/g respectively.     

Synthesis and properties of clay-based superabsorbent composite

A novel superabsorbent composites based on acrylic acid, acrylamide, and inorganic clay mineral-attapulgite were synthesized through a solution polymerization to improve water and saline absorbencies. The superabsorbent composite was characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The effects of saline solutions, amount of initiator, crosslinker and attapulgite on the water absorbency of superabsorbent composites were investigated. The water retention test of superabsorbent composites were also carried out. The superabsorbent composite exhibited improved water and saline absorbencies compared with that of crosslinked poly(acrylic acid-co-acrylamide) superabsorbent polymer. The water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% reaches more than 1400 g H₂O/g and 110 g H₂O/g in distilled water and 0.9% NaCl solution, respectively.     

碳纳米管复合聚丙烯酸钠的制备及吸水性能

以过硫酸铵(APS)为引发剂,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了碳纳米管/聚丙烯酸钠高吸水树脂。系统考察了碳纳米管质量分数、引发剂、交联剂和聚合温度对树脂吸水性能的影响。结果表明,以单体丙烯酸质量为基准,当交联剂,引发剂和碳纳米管质量分数分别为0.04%、0.3%和0.3%,聚合温度75℃时,所合成树脂的吸水性能最佳。添加碳纳米管后树脂表面粗糙和形成孔结构导致了其吸水性能的变化,使得碳纳米管/聚丙烯酸钠的吸水量和吸水速率明显提高,其吸去离子水和生理盐水能力分别达到1423和104g/g。该树脂重复吸水5次后,其吸水能力为1081.5g/g,达到最大吸水倍数的76.0%。     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Preparation and characterization of cellulose acetate‐coated compound fertilizer with controlled‐release and water‐retention

A novel cellulose acetate‐coated compound fertilizer with controlled‐release and water‐retention (CAFCW) was prepared, which possessed the three‐layer structure. Its core was water‐soluble compound fertilizer granular, the inner coating was cellulose acetate (CA), and the outer coating was poly(acrylic acid‐co‐acrylamide)/unexpanded vermiculite (P(AA‐co‐AM)/UVMT) superabsorbent composite. The effects of the amount of acrylamide, crosslinker, initiator, degree of neutralization of acrylic acid (AA), and unexpanded vermiculite concentration on water absorbency were investigated and optimized. The water absorbency of CAFCW was 72 times its own weight if it was allowed to swell in tap water at room temperature for 90 min. Element analysis and atomic absorption spectrophotometer results showed that the product contained 11% nitrogen, 6% phosphorus (shown by P₂O₅), 9% potassium (shown by K₂O), 1% calcium (shown by CaO), and 0.4% magnesium (shown by MgO). Swelling rate, slow‐release, and water‐retention properties of CAFCW were also investigated. This product with good controlled‐release and water‐retention capacity, being degradable in soil and environmentally friendly, could be especially useful in agricultural and horticultural applications. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and Properties of Poly(acrylic acid)/Mica Superabsorbent Nanocomposite

A novel poly(acrylic acid)/mica superabsorbent composite was synthesized by graft polymerization reaction between partially neutralized acrylic acid and ultrafine mica mineral powder. The water absorbency of the composite is higher than 1 100 g H₂O/g. The influence of the neutralization degree of acrylic acid, as well as of the amounts of mica and crosslinker on the absorbing properties are discussed in this paper.     

Frontal polymerization synthesis and characterization of Konjac glucomannan‐graft‐acrylic acid polymers

Konjac glucomannan‐graft‐acrylic acid polymers, used as superabsorbent polymers (SAPs), were synthesized by frontal polymerization (FP). The features of front propagation including front velocity and maximum temperature (T_max) were influenced by the amount of glucomannan, initiator, and environment temperature. The graft copolymer was characterized by FTIR, DSC, and SEM. The amount of crosslinking agent mainly determined the crosslinking degree of SAPs that would affect the water absorbency and microstructure. Water absorbency of SAP was also investigated and most of them displayed high water absorption rate. The aforementioned results allow us to conclude that FP can be considered as a promising method to fabricate SAP for its excellent advantages. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3391–3398, 2009     

丙烯酸与丙烯酰胺共聚制备高吸水性树脂

采用溶液聚合法,以N,N’-亚甲基双丙烯酰胺（NMBA）为交联剂,过硫酸钾（KPS）为引发剂合成了高吸水性树脂聚（丙烯酸-丙烯酰胺）（P（AA—AM））,研究了单体配比、丙烯酸中和度、引发剂及交联剂用量、反应温度对树脂在去离子水和0．9％盐水中吸水率的影响．最佳条件下制备的树脂在去离子水中吸水率为750g·g^-1,在0．9％盐水中吸水率为85g·g^-1．     

氧化淀粉基高吸水性树脂的制备及表征

以过硫酸铵为引发剂,N,N’-亚甲基双丙烯酰胺为交联剂,制备氧化淀粉―丙烯酸―丙烯酰胺高吸水性树脂,并采用红外光谱、X射线衍射等手段对产品的结构进行表征。通过单因素实验优化其制备工艺,最佳工艺条件为:氧化淀粉基体用量为50%,丙烯酸/丙烯酰胺质量比为4∶1,丙烯酸中和度为70%,引发剂过硫酸铵用量为0.5%,交联剂N,N’-亚甲基双丙烯酸胺用量为0.15%,反应温度为80℃,反应时间为3 h。此条件下,氧化淀粉基高吸水性树脂的吸水率达到972.4 g/g。     

Preparation and Properties of Novel Slow-release PK Agrochemical Formulations Based on Carboxymethylcellulose-Graft-Poly(acrylic acid-co-itaconic acid) Superabsorbents

To improve the utilization of fertilizer and water resources at the same time, a new slow-release PK compound fertilizer (SRCF) with the function of water retention was prepared. Element analysis results showed that the product contained 20.46% potassium (shown by K₂O) and 15.45% phosphorus (shown by P₂O₅), which were trapped in the matrix of carboxymethylcellulose-graft-poly(acrylic acid-co-itaconic acid) superabsorbent polymer. Major factors affecting the water absorbency of SRCF such as weight ratio of itaconic acid (IA) to acrylic acid (AA), contents of crosslinker, K₂HPO₄, and carboxymethylcellulose (CMC) were investigated and optimized. The water absorbency of the product was 130 times its own weight if it was allowed to swell in tap water at room temperature for 1 h. Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric/Differential thermal analysis (TG/DTA) confirmed that AA and IA monomers were graft-copolymerized onto CMC backbone and presented the improved thermal stability. The water evaporation of the fertilizer-containing superabsorbents, as well as their nutrients release in sandy soil was carried out, and a possible slow-release mechanism was proposed. Additionally, compressive modulus measurements revealed that the introduction of CMC could improve the mechanical properties of the superabsorbents. These studies showed that the product with good slow-release and water retention properties, being economical and environment-friendly, could be expected to have wide potential applications in modern agriculture and horticulture.     

Converting water absorbent polymer to alcohol absorbent polymer

In this paper, a commercial water absorbent polymer based on poly (sodium acrylate) (PAANa) was converted to an alcohol absorbent polymer. PAANa collapses in alcoholic swelling media such as ethanol and methanol. In the present paper, first, a full interpenetrating polymer network (IPN) gel was prepared through immersing PAANa hydrogel in a solution containing 2‐acrylamido2‐methyl propane sulfonic acid (AMPS), polyethylene glycol dimetahcrylate and ammonium persulfate. The second network was formed in hydrated PAANa through heating. It was synthesized in two conditions by chemical crosslinker and crosslinker‐free. The IPN was acid treated to investigate the effect of removing Na⁺ on alcohol absorbency. The synthesized IPN gels have the ability of absorbing up to 21 and 39 g/g ethanol and methanol, respectively. The samples which were synthesized using the chemical crosslinker in the second stage had more alcohol absorbency in comparison with the crosslinker‐free samples. Unexpectedly, acid treatment caused a decrease in alcohol absorbency. The IPN gels were characterized through thermogravimetric analyses (TGA) and dynamic mechanical thermal analysis (DMTA). The DMTA results confirmed the IPN structure of the gels, two distinctive peaks, which can be attributed to PAANa, and poly (AMPS) was observed in tan delta figures. TGA thermograms demonstrated that IPN had lower thermal stability in comparison with the initial PAANa, which can be attributed to higher vulnerability of SO₃H group for degradation that reduced initial decomposition temperature. Copyright © 2012 John Wiley & Sons, Ltd.     

钻井液用交联-接枝淀粉的制备及性能

以N,N′-亚甲基双丙烯酰胺为交联剂,过硫酸铵为引发剂,采用“溶剂法”工艺合成了高粘度抗剪切丙烯酸钠接枝淀粉(St),考察了单体、引发剂和交联剂用量、丙烯酸中和度、反应时间及反应温度对合成交联丙烯酸钠接枝淀粉糊液粘度的影响。 结果表明,其优化反应条件为：m(淀粉)∶m(丙烯酸）=1∶1.5,乙醇质量分数为80%,过硫酸铵的用量为单体总质量的1%,交联剂为单体总质量的0.6%,反应时间2.5 h,反应温度为55 ℃,丙烯酸中和度为70%。 该交联接枝淀粉糊液具有良好的触变性,在4%盐水泥浆中的添加量为14.0 g/L时,表观粘度为26.0 mPa·s,滤失量为7.2 mL;在饱和盐水泥浆中添加量为23.5 g/L时,表观粘度为54.5 mPa·s,滤失量为3.1 mL;在80 ℃高温下老化16 h其表观粘度及滤失量等性能基本保持不变,表现出良好的增粘、降失水作用和抗盐、抗老化性能。     

Preparation and properties of superabsorbent containing starch and sodium humate

Starch and sodium humate were utilized as raw material for synthesizing starch‐g‐poly(acrylic acid)/sodium humate (St‐g‐PAA/SH) superabsorbent by graft copolymerization reaction of starch (St) and acrylic acid (AA) in the presence of sodium humate (SH) in aqueous solution. The effect of weight ratio of AA to St, initial monomer concentration, neutralization degree of AA, amount of crosslinker, initiator and SH on water absorbency of the superabsorbent were studied. The swelling rate and swelling behavior in NaCl solution as well as reswelling ability of the superabsorbent were systematically investigated. The results showed that the superabsorbent synthesized under optimal conditions with SH content of 7.7 wt% and St content of 11.5 wt% exhibits water absorbency of 1100 g/g in distilled water and 86 g/g in 0.9 wt% NaCl solution, respectively. Introducing SH into the St‐g‐PAA polymeric network can improved the swelling rate and reswelling capability of the superabsorbent. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and Properties of Biodegradable Slow-Release PAA Superabsorbent Matrixes for Phosphorus Fertilizers

Biodegradable superabsorbent matrixes for a slow-release fertilizer were prepared by using crosslinked acrylic acid and water-soluble granular phosphorus fertilizer KH₂PO₄. The effects of the amount of crosslinker, initiator and phosphorus fertilizer concentration on water absorption were investigated and optimized. The products show excellent slow release and water-retention capacity, being nontoxic in soil and environment-friendly, and could be useful especially in agricultural and horticultural applications. The results showed that the hydrogel structure and swelling capacity was affected by various factors, such as concentration of crosslinker and initiator, as well as by the amount of KH₂PO₄.     

Syntheses and properties of superabsorbent composites based on natural guar gum and attapulgite

Utilization of raw materials available in nature and their application to derive other useful products without any adverse impact on the environment has long been a desired goal. In this work, guar gum (GG) and attapulgite (APT) clay were used as raw materials for preparing guar gum‐g‐poly(acrylic acid)/attapulgite (GG‐g‐PAA/APT) superabsorbent composites through the graft copolymerization of GG, partially neutralized acrylic acid (AA) and APT in aqueous solution. The effects of reaction conditions such as concentrations of the initiator and crosslinker, APT content, etc. on water absorbency were investigated. The composite prepared under optimal conditions gave the best absorption of 529 g/g sample in distilled water and 61 g/g sample in 0.9 wt% NaCl solution. Swelling behaviors revealed that the superabsorbent composites retained a high water absorbency over a wide pH range of 4–11, and the developed composites also exhibited improved reswelling and water‐retention capabilities. The superabsorbent composites can be utilized as eco‐friendly water‐manageable materials for agricultural and horticultural applications. Copyright © 2008 John Wiley & Sons, Ltd.     

Gel strength and swelling of acrylamide‐protic acid superabsorbent copolymers

The viscoelastic and swelling properties of polyacrylamide‐based superabsorbent copolymers were investigated as a function of the ionic comonomer structure. Superabsorbent copolymers were synthesized by free‐radical crosslinking copolymerization of acrylamide and one of the monoprotic acids (acrylic acid and crotonic acid) or the diprotic acids (maleic acid and itaconic acid) as the investigated ionic comonomer. The reaction composition of all components, i.e. monomer, comonomer, initiator, co‐initiator, and crosslinker, was fixed to be the same for the synthesis of all four superabsorbent copolymer systems. Viscoelastic measurements were performed in all systems where the particles were closely packed. The network structures of all systems were evaluated via viscoelastic and swelling measurements. The results indicated that superabsorbent polymers (SAPs) with high water absorbency were accompanied by low gel strength and the calculated high value of molecular weight between crosslinks ($\bar {M}{}_c$ ) and low value of effective crosslinking density (ν_e). Diprotic acid‐containing SAPs showed higher water absorbency over monoprotic acid‐containing and non‐ionic ones. The differences in $\bar {M}{}_c$ and ν_e values of each system were explained with respect to the differences in the monomer reactivity ratio and hydrophilicity of the comonomers. Copyright © 2010 John Wiley & Sons, Ltd.