Surfactant-to-Dye Binding Degree Method for the Determination of Morphine Hydrochloride and Codeine Phosphate in Pharmaceuticals

Abstract

The surfactant-to-dye binding degree method was used to determine morphine hydrochloride and codeine phosphate. Neutral red and bis(2-ethylhexyl) sulfosuccinate (AOT) were used as the dye and surfactant, respectively, to form dye–surfactant aggregates. Addition of the drug resulted in a decrease in the dye–surfactant binding degree, proportional to the drug concentration. This was measured by monitoring the absorbance changes of the dye at 532 nm. Under the optimum conditions, the calibration graphs were linear up to 32 and 28 µg mL^?1 for morphine hydrochloride and codeine phosphate, respectively, with the corresponding detection limits of 0.40 and 0.35 µg mL^?1.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

A Sensitive Colorimetric Method for the Determination of Arsenic in Environmental and Biological Samples

Results of a thorough study and application of leucocrystal violet for the determination of arsenic in parts per million (ppm) levels in environmental and biological samples is described here. The proposed method is based on the reaction of arsenic with potassium iodate to liberate iodine. The liberated iodine selectively oxidises leucocrystal violet to form crystal violet dye in the presence of sodium hydroxide. The dye formed shows maximum absorbance at 592 nm. The detection limit of arsenic is 0.002 μgmL^?1 and the method obeys Beer's law over the concentration range of 0.1 μg - 1.0 μg of per 25 mL of final solution (0.004–0.04 ppm). The molar absorptivity was found to be 1.49 × 10⁶ L mol^?1 cm^?1. The proposed method was successfully applied for the determination of arsenic in various environmental and biological samples. The results are in good agreement with the standard reported method.     

Aminophenyl Benzimidazole as a New Reagent for the Estimation of NO2/Nitrite/Nitrate at Trace Level: Application to Environmental Samples

Abstract

A simple and sensitive spectrophotometric method for the determination of nitrogen dioxide in ambient air and nitrite/nitrate in water and soil samples has been developed. Nitrogen dioxide in air has been fixed as nitrite ion using alkaline sodium arsenite as absorbing medium. The method is based on the reaction of nitrite with aminophenyl benzimidazole in acid medium to form diazonium ion, which is coupled with N‐(1‐naphthyl)ethylenediamine dihydrochloride to form an azo dye with an absorption maximum at 555 nm in aqueous phase. The method obeys Beer's law in the concentration range 0–10 µg of nitrite in 25 ml solution. The molar absorptivity has been found to be 6.3×10⁴ l mol^?1 cm^?1. The dye can be extracted quantitatively into isoamyl alcohol under alkaline condition and the addition of methanolic hydrochloric acid restores the original dye colour. Beer's law is obeyed in the concentration range 0–2 µg of nitrite with a detection limit of 0.009 µg. The effect of interfering species has been studied and the developed method has been applied to determine trace levels of nitrogen dioxide in ambient air and the results have been compared with the standard method. It is also applied to measure the nitrite/nitrate levels of surface and ground water samples collected from lakes, tube wells as well as soil samples.     

Facile and Sensitive Spectrophotometric Determination of Chromium

Abstract

A simple, sensitive, and selective spectrophotometric method is developed for the determination of trace amounts of chromium(VI) in various samples. The method is based on oxidation of 2,4-dinitrophenylhydrazine (DNPH) by chromium in an acidic medium and coupling with β-naphthol to give a red-colored dye, having an absorbance maximum at 663 nm, and/or coupling with α-naphthol to give a violet-colored dye, having an absorbance maximum at 503 nm. The method obeys Beer's law in the concentration range 0.02–4.0µg mL^?1 and 0.05–9.0 µg mL^?1, respectively. The optimum reaction conditions and other important analytical parameters were established. Interference caused by various nontarget ions was also investigated. The proposed method is applied to the analysis of chromium(VI) in environmental, pharmaceutical, and steel samples. The performance of the proposed method is evaluated using the student's t and F -tests.     

Simultaneous kinetic–spectrophotometric determination of mycophenolate mofetil and mycophenolic acid based on complexation with Fe(III) using chemometric techniques

Determination of pharmaceutical analytes has been subjected to many investigations, especially in transplantations in which accurate and precise detection of drugs is of importance. In this study, a simple and fast complexation reaction has been employed for simultaneous kinetic–spectrophotometric determination of two immunosuppressant drugs, mycophenolate mofetil and its active metabolite mycophenolic acid, which is based on the reaction between drugs and Fe(III) ions in the presence of sodium dodecyl sulfate as anionic surfactant by standard addition method. The effect of influential parameters including type of surfactant, concentration of Fe(III) ions and pH of the solution on the complexation reaction has been studied, and SDS was chosen as suitable surfactant, while reaction proceeds with 0.1 M Fe(III) at pH 4. Multivariate curve resolution-alternating least squares has been employed for analyzing the multiset data obtained from augmentation of resulting standard addition matrices. Values for limit of detection of method have been calculated as 4.88 and 1.62 µg mL^?1 for mycophenolic acid and mycophenolate mofetil, respectively, and Beer’s law is obeyed over the concentration ranges 10–200 µg mL^?1 for MPM and 50–250 µg mL^?1 for MPA. The proposed method was successfully applied for determination of drugs in plasma serum samples. The accuracy and reliability of the method was further ascertained by recovery studies via standard addition procedure.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

Amorphous titanium dioxide as an adsorbent for dye polluted water and its recyclability

Amorphous TiO₂, synthesized from TiCl₄ and diluted NH₃ solution, was characterized by X-ray diffraction spectrometry, UV–Vis diffused reflectance spectroscopy, Fourier-transformed infrared spectroscopy, and scanning electron microscopy. The powder exhibited high specific surface area at 508 m²/g as measured by the Brunauer-Emmett-Teller method. The pH at point of zero charge of the as-prepared amorphous TiO₂ was determined by the pH drift method to be 6.8. The product was studied for its sorption efficiency using two dyes—crystal violet (CV) and malachite green (MG). Studies on the effects of various sorption parameters (contact time, TiO₂ dosage, pH of solution, and initial concentration of dye) were carried out in order to find the optimum adsorption conditions for which the results were: contact time ~30 min, TiO₂ dosage ~0.05–0.1 g, pH 7–9, and initial concentration <1 × 10^?4 M. The adsorption data were analyzed and fitted better with the Langmuir model than the Freundlich model. The maximum adsorption capacities obtained from the Langmuir model were 0.4979 and 0.4075 mmol dye/g TiO₂ for CV and MG dye, respectively. In addition, the regeneration and the recyclability of the prepared amorphous TiO₂ were also studied. The used adsorbent should be regenerated 10–12 h before reuse in the next cycle for the best result.     

Catalyzed Determination of Glucose with a Mimic Enzyme Constructed of Bis‐[‐6‐O‐(‐β‐ethyloic‐butanedioic Acid‐1,4‐ester‐4‐)]β‐Cyclodextrin · Fe3+

Abstract

Catalyzed determination of glucose with mimic glucose oxidase is constructed by the reaction of β‐cyclodextrin, maleic anhydride, and chloroacetic acid with iron trichloride in hydrogen peroxide. The method is simple and convenient, and sensitivity and repeatability are ideal. Beer's law is obeyed in a concentration range of 30–197 µg · ml^?1 glucose with an excellent correlation coefficient (r=0.9994), while the detection limit is 4.10 µg · ml^?1, the RSD is 0.98% (n=8). The recovery of sample is 95.8–103.1%.     

Diaminobenzene as a Novel Reagent for Nitrite Assay in Environmental Samples: Evidence for Its Mechanistic Aspects

Abstract

o-Phenylenediamine has been used as a reagent to quantify nitrites/nitrates in a variety of sample matrices. The method is based on the cyclization reaction between o-phenylenediamine and nitrite in acid medium. The amine undergoes diazotization with nitrite in the presence of acid to form the diazonium ion, which subsequently cyclizes to yield yellowish orange benzotriazole at room temperature with an absorption maximum at 450 nm. The formed dye has been separated, purified, and characterized by IR, NMR, and spectroscopy techniques. The parameters of the reaction between amine and nitrite have been optimized. The effect of interfering ions on the determination of nitrites/nitrates has been described. The developed method has been applied for the determination of residual NO₂ gas present in the ambient air after fixing it as a nitrite ion using sodium arsenite as a trapping medium. The dye formed has been extracted into organic solvent to improve the detection limit during the measurement of low levels of ambient NO₂ in air. The method obeyed Beer's law in the concentration range 0–250 µg in aqueous medium and 0–50 µg in organic medium with molar absorptivity of 4.09 × 10⁴ L mol^?1 cm^?1 and 4.3 × 10⁴ L mol^?1 cm^?1 respectively. Nitrate is determined by reducing it to nitrite after passing through the copperized cadmium reductor column. The developed method has been applied to determine nitrite/nitrate levels in water, soil, and biological samples.     

Evaluation of a Multi-Walled Carbon Nanotube-Hemin Composite for the Voltammetric Determination of Hydrogen Peroxide in Dental Products

A simple, low cost sensor was developed for the voltammetric determination of hydrogen peroxide in mouthwash and dental whitening gel based on multi-walled carbon nanotubes incorporated with hemin. The sensor showed electrocatalytic activity toward the reduction of hydrogen peroxide in 0.05 mol L^?1 Tris-HCl buffer solution (pH 7.0) using cyclic voltammetry. The optimum composition of paste was 20:10:70% (m/m/m) (multi-walled carbon nanotubes:hemin:mineral oil). A linear plot of the square root of scan rate vs. cathodic peak current showed that reduction of hydrogen peroxide is diffusion controlled. Using linear sweep voltammetry, the analytical curve ranged from 0.2 up to 1.4 mmol L^?1 (r = 0.9996) with a sensitivity of 3.62 × 10^?2 mA mol^?1 L. The limits of detection and quantification were found to be 12.5 µmol L^?1 and 41.7 µmol L^?1, respectively. The developed method was applied for hydrogen peroxide determination in dental formulations. The results were compared with a volumetric method as a reference technique. No significant differences at the 95% level (paired student t test) were observed, thus demonstrating the accuracy of the sensor for the analysis of real samples.     

Application of chemometric methods in modeling of competitive multidye biosorption from ternary system

Simultaneous biosorption properties of three cationic dyes (Methylene blue, Crystal violet and Safranin) on Sargassum glaucescens were studied. In the most of previous papers in the field of dye biosorption, one dye or dyes with nearly separate spectra were used and dye concentration was determined by Beer’s law at different λ _max. Significant of this study is application of dyes with highly overlapped spectra (as many real situations) that their concentrations can be determined by chemometric methods. Plackett–Burman design was applied to identify the most significant factors, Box–Behnken design was used to determine optimal conditions, and principal component-wavelet neural network was used for the simultaneous determination of dye concentrations in ternary solutions. The optimum biosorption conditions were determined as dye concentration 10^?4 mol L^?1, biosorbent dosage 0.1 g L^?1 and biosorbent particle size 0.188 µm. At this condition, maximum biosorption capacity was 0.80 mmol g^?1. The biosorption process was slightly slower in the ternary system comparing with single system which was related to competition phenomena between dyes. It was found that the overall biosorption data were described by the pseudo-second-order kinetic model. Fourteen isotherm models were applied to experimental data, and it was concluded that Hill model had the best correlation.     

Spectrophotometric Determination of Nitrite in Water Samples with 4‐(1‐Methyl‐1‐Mesitylcyclobutane‐3‐yl)‐2‐Aminothiazole

Abstract

A simple, sensitive, and specific spectrophotometric method for the measurement of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. The azo dye, 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐(p‐N,N‐dimethylazobenzene)‐1,3‐thiazole was synthesized with the reaction of 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐aminothiazole and N,N‐dimethyl aniline in acidic medium. Obtained azo dye has been characterized by infrared (IR), ¹H nuclear magnetic resonance (NMR), and microanalysis methods. The dye shows an absorption maximum at 482 nm. The method is optimized for acid concentration, pH, amount of reagents required, time, and interfering species. All the determinations were carried out at this wavelength throughout the work. At an analytical wavelength of 482 nm, Beer's law is obeyed over the concentration range 0.05 to 2.00 µg nitrite per mL analyte. The molar absorptivity, Sandell's sensitivity, and relative standard deviation are 2.03×10⁴ L mol^?1 cm^?1±251.3 (95%), 2.28×10^?3 µg cm^?2, and 2.74% (n=10), respectively. The detection limit of the method is 0.012 µg ml^?1 of nitrite ion. The method was succesfully applied to the determination of nitrite in tap water and lake water.     

A New Spectrophotometric Method for the Determination of Ascorbic Acid Using Leuco Malachite Green

A new simple and sensitive and selective spectrophotometric method has been developed for the determination of ascorbic acid (AA) at trace level using a new reagent, leuco malachite green (LMG). AAreacts with potassium iodide‐iodate solution under acidic conditions to liberate iodine and the liberated iodine selectively oxidizes LMG to MG dye. The colour of the dye was measured at 620 nm. Beer's law is obeyed over the concentration range of 0.8–8 iμg μAA per 25 mL of final solution (0.032–0.32 ppm). The apparent molar absorptivity and Sandell's sensitivity of the method were found to be 2.98 × 10⁵ l mol⁻¹ cm⁻¹, 0.0042 μg cm⁻², and respectively. Statistical treatment of the experimental results indicates that the method is precise and accurate. The method is free from interference of common ions and many of the ingredients commonly found in pharmaceuticals. The reliability of the method was established by parallel determination against Leucocrystal violet (LCV) method. The method described was satisfactorily applied for the determination of AA in fruit juices, pharmaceuticals and biological samples.     

Sensitive electrochemical detection of picloram utilising a multi-walled carbon nanotube/Cr-based metal-organic framework composite-modified glassy carbon electrode

This study describes the utilisation of a glassy carbon electrode modified with a composite of multi-walled carbon nanotube and Cr-based metal-organic framework (MIL-101, Cr-BDC, BDC = 1,4-benzenedicarboxylate) for the sensitive, simple and fast voltammetric determination of picloram in environmental samples. Under optimum conditions, additions of picloram using square wave voltammetry showed linear ranges of picloram concentrations from 24.15 to 3018 µg?L^?1 (0.1–12.5 μM) and from 3018 to 9658 µg?L^?1 (12.5–40 μM) with a detection limit of 14.49 µg?L^?1 (0.06 µM). The method was successfully applied to the determination of picloram in tap and river water samples spiked with picloram without any purification step by the standard addition method. The good recovery values obtained ranging from 97.5% to 105.0% revealed the reliability and accuracy of the method.     

A greener microwave-assisted extraction method for rapid spectroscopic determination of selected metals in river and freshwater sediment certified reference materials

The current study describes development of novel, cost-effective, rapid and greener microwave-assisted extraction (MW-AE) method using diluted hydrogen peroxide (H₂O₂) and 400 µL of concentrated aqua-regia for the extraction of 10 selected metals (Ba, Cr, Cu, Co Fe, Mn, Ni, Pb, V and Zn) in sediment certified reference materials (CRMs), prior to inductively coupled plasma-optical emission spectroscopic analysis. The optimum extraction conditions were achieved when 0.2 g of sediment was extracted with 1 mol L^?1 of H₂O₂ (12.00 mL) and 400 µL of concentrated aqua-regia, at 180°C microwave extraction temperature for 30 min. Accuracy of the proposed MW-AE method was evaluated by using river (LGC6187) and freshwater (CRM015-050) sediment CRMs. Quantitative extraction recoveries of 80–120% in LGC6187 and 74–124% in CRM0150-050 were obtained with acceptable precision (0.4–1.0%). The proposed extraction method has a clear advantage over classical approaches as 1 mol L^?1 H₂O₂ was used instead of notorious acidic mixture (Hydrochloric acid/ nitric acid/ hydrofluoric). The method detection limits (MDLs) of 0.03–0.9 μg g^?1 were obtained for all the investigated metals and were fairly comparable with the MDLs of the published literature reports. Therefore, the proposed MW-AE method can be routinely used for monitoring of metal ions in various river and fresh water sediments.     

Square-Wave Anodic Stripping Voltammetry (SWASV) for the Determination of Ecotoxic Metals,Using a Bismuth-Film Electrode

This article reviews the use of square wave anodic stripping voltammetry for the simultaneous determination of ecotoxic metals (Pb, Cd, Cu, and Zn) on a bismuth-film (BiFE) electrode. The BiFE was prepared in situ on a glassy-carbon electrode (GCE) from the 0.1 mol L^?1 acetate buffer solution (pH 4.5) containing 200 µg L^?1 of bismuth (III). The addition of hydrogen peroxide to the electroanalytical cell proved beneficial for the interference-free determination of Cu (II) together with zinc, lead, and cadmium, using the BiFE. The experimental variables were investigated and optimized with the view to apply this type of voltammetric sensor to real samples containing traces of these metals. The performance characteristics, such as reproducibility, decision limit (CC_a), detection capability (CC_β), sensitivity, and accuracy indicated that the method holds promise for trace Cu²⁺, Pb²⁺, Cd²⁺, and Zn²⁺ levels by employment of Hg-free GCE with SWASV. CCa, and CCβ were calculated according to the Commission Decision of 12 August 2002 (2002/657/EC). Linearity was observed in the range 20–280 µg L^?1 for zinc, 10–100 µg L^?1 for lead, 10–80 µg L^?1 for copper, and 5–50 µg L^?1 for cadmium. Using the optimized conditions, the stripping performance of the BiFE was characterized by low limits of detection (LOD). Finally, the method was successfully applied in real as well as in certified reference water samples.     

Flow Injection Chemiluminescence Determination of Phenol in Neutral Medium

A new flow injection chemiluminescence method for the determination of phenol was proposed, based upon the chemiluminescence reaction of phenol, N-bromosuccinimide, and hydrogen peroxide in neutral aqueous medium in the presence of cetyltrimethylammonium bromide surfactant micelles. The chemiluminescence signal was proportional to the concentration of phenol in the range of 1.0 × 10^?7?8.0 × 10^?6 g/mL with a detection limit of 3 × 10^?8 g/mL. The relative standard deviation for 1.0 × 10^?6 g/mL phenol solution was 2.0% (n = 11). The proposed method was successfully applied to the determination of phenol in phenol ear drops. A possible CL reaction mechanism was also discussed briefly.     

Spectrophotometric Determination of Sparfloxacin in Pharmaceutical Preparations by Ternary Complex Formation with Pd(II) and Eosin

Abstract

A simple, sensitive, and direct spectrophotometric method has been developed for the assay of sparfloxacin in bulk and pharmaceutical preparations. The proposed method is based on the formation of ternary complex between an investigated drug, palladium(II) ion and eosin in the presence of methylcellulose as surfactant and acetate buffer of pH 4.2. Spectrophotometrically, under the optimum conditions, the ternary complex showed absorption maximum at 550 nm, with apparent molar absorptivity of 2.69×10⁴ l mol^?1 cm^?1, Sandell's sensitivity of 0.01458 µg ml^?1 and linearity in the concentration range 1.6–16 µg ml^?1. The composition of the ternary complex was studied by Job's method of continuous variation and the result indicated that the molar ratio of SPFX: Pd: eosin is 1∶1∶1. The optimum reaction conditions and other analytical parameters are evaluated. The proposed method was successfully applied for the determination of SPFX in its pharmaceutical product with mean percentage recoveries of 99.71%. The observed data has been subjected to statistical analysis, which revealed high accuracy and precision.     

Ultrasensitive immunoassay of microcystins-LR using G-quadruplex DNAzyme as an electrocatalyst

An electrochemical immunoassay for microcystin-LR (MC-LR) detection was developed using multi-labeled horseradish peroxidase-mimicking DNAzyme on carbon nanotubes (CNTs) as electrocatalyst for signal amplification. CNTs were covalently conjugated to multiple DNAzyme along with MC-LR for a competitive immunoassay. The as-prepared DNAzyme/CNTs/MC-LR biolabel was specifically captured on the electrode surface, and current responses were obtained upon the electro-catalytic reduction of hydrogen peroxide by the captured biolabels. Under optimal conditions, the electro-catalytic current decreased linearly with the increase amount of MC-LR in the range from 0.01 to 7.0 µg L^?1. The linear regression equation was I (µA) = 12.96 ? 1.48 X _[MC–LR] (µg L^?1), with a correlation coefficient of 0.989. The limit of detection of MC-LR was 2.31 ng L^?1. Application of the immunoassay method and LC/MS/MS method for MC-LR determination on spiked reservoir water gave recovery range of 91.7–105.2% and 94.0–105.0%, respectively. The resulting versatile immunoassay exhibited high sensitivity, good precision and satisfactory reproducibility, which could have vast potential in routine water quality monitoring for various environmental toxins.