Cyclization of N-alkyldithiocarbamates in alkaline media,a counter example of well-known chemistry – an experimental and theoretical study

In strong alkaline media, the reaction of 2-(tert-butylamino)ethanol (3: R?=?Bu^t) with CS₂ at 0°C produced a cyclic dithiocarbamate, 3-tert-butylthiazolidine-2-thione (1: R?=?Bu^t), rather than alkaline metal or ammonium salts of [S₂CN(Bu^t)CH₂CH₂OH]^?. This is in contrast to isolation of stable alkaline metal or ammonium salts of [S₂CN(R)CH₂CH₂OH]^? (R?=?Me, Et, Pr, or CH₂CH₂OH) obtained in analogous reactions. The use of Ni(OAc)₂, both as a source of Ni(II) and a weaker base, in a one-pot reaction with (3: R?=?Bu^t) and CS₂, successfully gave the first reported metal complex of [S₂CN(Bu^t)CH₂CH₂OH]^?, namely [Ni{S₂CN(Bu^t)CH₂CH₂OH}₂] (2: R?=?Bu^t). Compounds 1 and 2 have been fully characterized by infrared and NMR spectroscopies, and by X-ray crystallography. DFT calculations on the cyclization and stabilities of [S₂CN(R)CH₂CH₂OH]^? (R?=?Pr and Bu^t) have been carried out.     

A comparative study of amide-bond forming reagents in aqueous media – Substrate scope and reagent compatibility

A survey of amidation reagents demonstrating DIC-HOPO, DMT-MM, COMU-collidine, TPTU-NMI, EEDQ, CDI and EDC-Oxyma to be effective for the coupling of carboxylic acids with amines in the presence of water and the absence of problematic dipolar aprotic solvents is reported. DMT-MM was shown to provide the best yields for the coupling of a secondary amine, TPTU-NMI and COMU-collidine for aniline, whilst the combination of DIC with HOPO afforded the broadest substrate scope and the highest yields for a sterically demanding carboxylic acid.     

Thermodynamic behavior and stability constants of lanthanides–Schiff base complexes in mixed aqueous solvents

The stability constant of complexes of Ln³⁺ ions and butanamide-3-[(2-hydroxyphenyl methylene)amino]ethylimino N-phenyl were determined potentiometrically in 75% (v/v) dioxane?Cwater, 0.1?M (KNO₃) at different temperatures applying the Irving and Rossotti techniques. The nonlinear variation of the thermodynamic parameters (??G, ??H, and ??S) as a function of ionic potential of lanthanide elements was discussed. This behavior was explained in terms of difference in the dehydration of lighter Ln³⁺ from that of heavier ones. In different organic solvents (75% solvent?Cwater media), the stability constant values follow the order: dioxane?>?methanol?>?DMF, depending upon both the dielectric constant and the hydrogen bonding structure of the medium. The thermodynamic parameters at all complexes have been analyzed in terms of their electrostatic (el) and non-electrostatic (non) parts.     

Optical and nonlinear optical properties of new Schiff’s bases: experimental versus theoretical study of inclusion interactions

Experimentally and theoretically were studied the physical properties of 19 new Schiff’s bases and their different protonated forms, depending on reaction conditions. It was elucidated the correlation between the type of molecular architecture, substituents and pH of the medium on first hyperpolarizability (β) with regard to the potential application of these compounds as organic nonlinear optical materials. The structure and optical properties were also studied, comparing quantum chemical data and experimental results from the mass spectrometry, electronic absorption, diffuse reflectance, and fluorescence spectroscopy, vibrational spectroscopy in condense phase, nuclear magnetic resonance, as well as thermal methods.     

Thermochemical study of the reactions of acid–base interaction in an aqueous solution of α-aminobutyric acid

The heat effects of the interaction between a solution of α-aminobutyric acid and solutions of HNO₃ and KОН are measured by means of calorimetry in different ranges of рН at 298.15 K and values of ionic strength of 0.25, 0.5, and 0.75 (KNO₃). The heat effects of the stepwise dissociation of the amino acid are determined. Standard thermodynamic characteristics (Δ_r H ⁰, Δ_r G ⁰, and Δ_r S ⁰) of the reactions of acid–base interaction in aqueous solutions of α-aminobutyric acid are calculated. The connection between the thermodynamic characteristics of the dissociation of the amino acid and the structure of this compound is considered.     

The Diels–Alder reactions of para-benzoquinone nitrogen-derivatives: an experimental and theoretical study

An experimental and theoretical study of the comparative reactivity and selectivity of the Diels–Alder reactions of para-benzoquinones and three nitrogen derivatives have been performed. The mono-oximes derivatives do not react under the tested reaction conditions, whereas the tosylated mono-oximes react slowly. However, the mono N-tosyl imines show excellent reactivity, and superior to the parent para-benzoquinones. DFT calculations support these experimental results.     

Capacity of layered cathode materials for lithium-ion batteries — a theoretical study and experimental evaluation

The theoretical capacity and the vacancy concentration of metal-ion-doped layered compounds such as LiCoO₂, LiNiO₂, and LiMnO₂, acting as cathodes in high-voltage lithium-ion batteries are calculated. The capacity shows strong dependence on valency of the doped metal ion and vacancy concentration. Experimental verification carried out to check the validity of the proposed equation for aluminium substitution into the potential layered materials shows good agreement between the experimental and theoretical capacity values. The vacancy concentration values of doped layered compounds have been found to be high when compared with that of the doped spinel compounds.     

Synthesis and characterization of nano−zinc wire using a self designed unit galvanic cell in aqueous medium and its reactivity in propargylation of aldehydes

Electrochemistry is used for propargylation of carbonyls in aqueous ZnCl₂ medium. For electrochemical process we designed a unit galvanic cell. ZnCl₂ is used as stoichiometric reagent and causes electrochemical deposition of zinc in cathode. Wire shaped nano zinc architecture has been formed in cathode during electrochemical process which is the active reagent. Homopropergylic alcohols are synthesized in good yields. After the organic reaction is over aqueous solution containing zinc salts can be reused up to 5th cycle without significant loss of reactivity.     

Kinetics of oxidation of phenylhydrazine by a μ-oxo diiron(III,III) complex in acidic aqueous media

Phenylhydrazine (R) quantitatively reduces [Fe₂(μ-O)(phen)₄(H₂O)₂]⁴⁺ (1) (phen?=?1,10-phenanthroline) and its conjugate base [Fe₂(μ-O)(phen)₄(H₂O)(OH)]³⁺ (2) to [Fe(phen)₃]²⁺ in presence of excess 1,10-phenanthroline in the pH range 4.12–5.55. Oxidation products of phenylhydrazine are dinitrogen and phenol. The reaction proceeds through two parallel paths: 1?+?R?→?products (k ₁), 2?+?R?→?products (k ₂); neither RH⁺ nor the doubly deprotonated conjugate base of the oxidant, [Fe₂(μ-O)(phen)₄(OH)₂]²⁺ (3) is kinetically reactive though both are present in the reaction media. At 25.0°C, I?=?1.0?M (NaNO₃), the rate constants are k ₁?=?425?±?10?M^?1?s^?1 and k ₂?=?103?±?5?M^?1?s^?1. An inner-sphere, one-electron, rate-limiting step is proposed.     

Role of hydration in determining the structure and vibrational spectra of L-alanine and N-acetyl L-alanine N′-methylamide in aqueous solution: a combined theoretical and experimental approach

In this work we have utilized recent density functional theory Born-Oppenheimer molecular dynamics simulations to determine the first principles locations of the water molecules in the first solvation shell which are responsible for stabilizing the zwitterionic structure of L-alanine. Previous works have used chemical intuition or classical molecular dynamics simulations to position the water molecules. In addition, a complete shell of water molecules was not previously used, only the water molecules which were thought to be strongly interacting (H-bonded) with the zwitterionic species. In a previous work by Tajkhorshid et al. (J Phys Chem B 102:5899) the L-alanine zwitterion was stabilized by 4 water molecules, and a subsequent work by Frimand et al. (Chem Phys 255:165) the number was increased to 9 water molecules. Here we found that 20 water molecules are necessary to fully encapsulate the zwitterionic species when the molecule is embedded within a droplet of water, while 11 water molecules are necessary to encapsulate the polar region with the methyl group exposed to the surface, where it migrates during the MD simulation. Here we present our vibrational absorption, vibrational circular dichroism and Raman and Raman optical activity simulations, which we compare to the previous simulations and experimental results. In addition, we report new VA, VCD, Raman and ROA measurements for L-alanine in aqueous solution with the latest commercially available FTIR VA/VCD instrument (Biotools, Jupiter, FL, USA) and Raman/ROA instrument (Biotools). The signal to noise of the spectra of L-alanine measured with these new instruments is significantly better than the previously reported spectra. Finally we reinvestigate the causes for the stability of the P_π structure of the alanine dipeptide, also called N-acetyl-L-alanine N′-methylamide, in aqueous solution. Previously we utilized the B3LYP/6-31G* + Onsager continuum level of theory to investigate the stability of the NALANMA4WC Han et al. (J Phys Chem B 102:2587) Here we use the B3PW91 and B3LYP hybrid exchange correlation functionals, the aug-cc-pVDZ basis set and the PCM and CPCM (COSMO) continuum solvent models, in addition to the Onsager and no continuum solvent model. Here by the comparison of the VA, VCD, Raman and ROA spectra we can confirm the stability of the NALANMA4WC due to the strong hydrogen bonding between the four water molecules and the peptide polar groups. Hence we advocate the use of explicit water molecules and continuum solvent treatment for all future spectral simulations of amino acids, peptides and proteins in aqueous solution, as even the structure (conformer) present cannot always be found without this level of theory. Festschift in Honor of Philip J. Stephens’ 65th Birthday. During the proof stage of this article a very relevant article has been published by M. Losada and Y. Xu titled “Chirality transfer through hydrogen-bonding: Experimental and ab initio analyses of vibrational circular dichroism spectra of methyl lactate in water” in Phys Chem Chem Phys 2007, 9: 3127–3135. In that work they confirm that the effects of water are seen in the VCD spectra and hence it is fundamental to include explicit water molecules in modeling studies of the vibrational spectra of biomolecules in aqueous solution.     

A novel synthesis of allyl and benzyl selenides via Sm/SbCl_3 system in aqueous media

Allyl and benzyl selenides were synthesized via reactions of allyl and benzyl bromides and diselenides promoted by Sm/Sb-Cl3 system in aqueous media in moderate to good yields.     

Determination of hydrogen peroxide and organic peroxides in micellar and aqueous–organic media using a spectrophotometric biosensor based on horseradish peroxidase

The expedience of the target-specific control of the properties of a medium (using micellar and aqueous–organic media), in which an indicator process providing the background for the operation of a spectrophotometric sensor based on a polyelectrolyte complex (horseradish peroxidase–chitosan) is conducted, is shown experimentally and proved by calculations of kinetic parameters of the enzymatic reaction. The application of the sensor ensures an increase in the sensitivity of the determination of peroxides of different nature and structures (e.g., hydrogen and urea peroxides, benzoyl peroxide, 2-butanone peroxide and tertbutyl hydroperoxide) in complex matrixes. The proposed approach allows the analyst not only to regulate the performance characteristics of the developed procedures for the determination of peroxides depending on the analytical task, but also to extend the range of test samples (including those insoluble in water) analyzed with no sample preparation.     

Evidence for side-chain π-delocalization in a planar substituted benzene: an experimental and theoretical charge density study on 2,5-dimethoxybenzaldehyde thiosemicarbazone

The charge density in 2,5-dimethoxybenzaldehyde thiosemicarbazone (1) has been studied experimentally using Mo-K(α) X-ray diffraction at 100 K, and by theory using DFT calculations at the B3LYP/6-311++G(2d,2p) level. The quantum theory of atoms in molecules (QTAIM) was used to investigate the extent of π-delocalization in the thioamide side-chain, which is virtually coplanar with the benzene ring. The experimental and theoretical ellipticity profiles along the bond paths were in excellent agreement, and showed that some of the formal single bonds in the side-chain have significant π-bond character. This view was supported by the magnitudes of the topological bond orders and by the delocalization indices δ(Ω(A), Ω(B)). An orbital decomposition of δ(Ω(A), Ω(B)) demonstrated that there was significant π-character in all the interchain non-H chemical bonds. On the other hand, the source function referenced at the interchain bond critical points could not provide any evidence for π-delocalization, showing instead only limited σ-delocalization between nearest neighbors. Overall, the topological evidence and the atomic graphs of the oxygen atoms did not provide convincing evidence for π-delocalization involving the methoxy substituents.     

The formation of a neutral manganese(III) complex containing a tetradentate Schiff base and a ketone – synthesis and characterization

2-Benzoylphenolato-(2,2′-((2,2-dimethylpropane-1,3-diyl)bis((nitrilo)(phenylmethylidyne)))-diphenolato-manganese(III) methanol solvate, [Mn(C₃₁H₂₈N₂O₂)(C₁₃H₉O₂)]·CH₃OH (1), was synthesized and characterized by FTIR, UV–vis, TG-FTIR, TG/DSC, molar conductivity, magnetic moment measurement, and quantum chemical calculations. During the synthesis, partial hydrolysis of ligand is observed. The compound was obtained as amorphous, dark-brown powder. The effects of organic solvents of various polarities on the UV–vis spectra of ligands and complex were investigated. In addition, the IR and UV–vis spectra were also calculated and compared with the experimental data. A single crystal for analysis was obtained by dissolving the amorphous complex in methanol, and slow evaporation of solvent at 4 °C. Single-crystal X-ray analysis indicated that the methanol molecules are not incorporated into the crystal lattice after the recrystallization process ([Mn(C₃₁H₂₈N₂O₂)(C₁₃H₉O₂)] (2)). In the structure Mn(III) is surrounded by two nitrogens and four oxygens of deprotonated Schiff base and α-hydroxy ketone ligands, and adopts a distorted octahedral geometry.     

An experimental study on MWCNT–water nanofluids flow and heat transfer in double-pipe heat exchanger using porous media

Journal of Thermal Analysis and Calorimetry - This paper presents the results of an experimental investigation on the heat transfer characteristics of multi-walled carbon nanotube aqueous...     

Effects of bubble size and approach velocity on bubble–particle interaction – a theoretical study

A theoretical analysis of the atomic force microscopy (AFM) approach–retract dynamic interaction between an air bubble and a hydrophilic silica plane was carried out based on the well-established Stokes–Reynolds–Young–Laplace model. An air bubble with different radii attached to the end of a cantilever approached the silica surface with different approach velocities in a 10^?3?M KCl solution. Results showed that with increasing approach velocity (0.1, 1, and 10?µm/s), the repulsive force, flattened area of the film, and hydrodynamic suction force between the 100-µm bubble and the silica plane increased. The film continued thinning at the initial stages of bubble retraction because of the attractive hydrodynamic pressure. When the bubble size decreased, the influence of hydrodynamic pressure was less evident. The final film thickness before bubble retraction was similar to the theoretical equilibrium thickness when the Laplace pressure was equal to the disjoining pressure.