Radical Graft Polymerization of Vinyl Monomers Initiated by A20 Groups Introduced Onto a Carbon Black Surface: Effect of azo Groups on Graft Polymerization

The radical graft polymerization of vinyl monomers from carbon black initiated by azo groups introduced onto the surface was investigated. The introduction of azo groups onto carbon black surface was achieved by three methods: the reaction of 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (AIP) with (1) epoxide groups, which were introduced by the reaction of carbon black with chlorometh-yloxirane; (2) acyl chloride groups, which were introduced by the reaction of carboxyl groups on the surface with thionyl chloride; and (3) 3-chloroformyl-1-cyano-1-methylpropyl groups, which were introduced by the reaction of carbon black with 4,4′-azobis(4-cyanovaleric acid) and then thionyl chloride. The amount of azo groups introduced onto the surface by the above methods was determined to be 0.07-0.19 mmol/g. The graft polymerization of methyl methacrylate was found to be initiated by azo groups introduced onto the carbon black surface. During the polymerization, poly(methyl methacrylate) was effectively grafted onto carbon black through propagation of the polymer from the radical produced on the surface by the decomposition of the azo groups. The percentage of grafting using carbon black having azo groups introduced by method 1 increased to 40%. It was also found that the graft polymerization of several vinyl monomers such as styrene, acrylonitrile, and acrylic acid was initiated by the azo groups introduced onto the surface and the corresponding polymer was effectively grafted onto the surface. Furthermore, the effect of the amount of carbon black having azo groups on the graft polymerization was investigated.     

Introduction of peroxide groups onto carbon black surface by radical trapping and radical graft polymerization of vinyl monomers initiated by the surface peroxide groups

The introduction of peroxide groups onto carbon black surface was achieved through the trapping of the peroxide radicals formed by the decomposition of polymeric peroxide, such as poly(tetraethylene glycol peroxyadipate) (ATPPO), and bis-peroxide, such as 1,1′-bis (t-butyldioxy)cyclohexane (Perhexa-C), by the surface: the amount of peroxide groups introduced onto carbon black surface by the treatment with ATPPO and Perhexa-C were determined to be 0.07 mmol/g and 0.12 mmol/g, respectively. The polymerization of vinyl monomers with positive e-value, such as methyl methacrylate and 2-hydroxyethy methacrylate, was successfully initiated by the peroxide groups introduced onto carbon black surface. During the polymerization, the corresponding polymers were effectively grafted onto the surface as a result of the propagation of polymer from the surface radicals formed by decomposition of the peroxide groups. The polymerization of vinyl monomers with negative e-value, such as styrene and vinyl acetate, however, was scarcely initiated by the peroxide groups on carbon black. This may be due to the fact that surface active radicals, which were formed by the hydrogen abstraction from carbon black by fragment radicals, inhibit the polymerization of vinyl monomers with negative e-value. © 1996 John Wiley & Sons, Inc.     

Graft polymerization of methyl methacrylate initiated by pendant azo groups introduced onto γ-poly(glutamic acid)

The grafting of poly(methyl methacrylate) (PMMA) onto biosynthesized γ-poly(glutamic acid) (γ-PGA) initiated by pendant azo groups introduced onto γ-PGA was performed. The introduction of pendant azo groups onto γ-PGA was achieved by the reaction of carboxyl groups of γ-PGA with azo initiators having hydroxyl or amino groups, such as 2,2-azobis[2-(hydroxymethyl)propionitrile] (AHP), 2,2′-azobis[2-methyl-N-(2-hydroxyethyl)propionamide] (AMHP), and 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (AIP), using N,N′-dicyclohexylcarbodiimide. The amount of pendant AHP groups introduced onto γ-PGA was estimated to be 0.15 mmol/g. Untreated γ-PGA failed to initiate the polymerization of MMA. On the contrary, the polymerization of MMA was found to be initiated in the presence of γ-PGA having azo groups: the polymerization rate was proportional to the square root of the concentration of γ-PGA having pendant azo groups. During the polymerization PMMA was grafted onto γ-PGA; the percentage of grafting of PMMA onto γ-PGA obtained from the graft polymerization initiated by pendant AHP, AMHP, and AIP groups was evaluated to be 65.0, 53.1, and 29.0%, respectively. Differential scanning calorimetric analysis shows that the endotherm transition point of γ-PGA at 220°C disappears by the grafting of PMMA onto the polymer. © 1993 John Wiley & Sons, Inc.     

Preparation and Thermal Decomposition of Cyclic Azoamidinium Salts as Water-Soluble Radical Initiators for Polymerization over A Wide Temperature Range

Abstract

A series of cyclic azoamidinium chlorides as water-soluble initiators were prepared by reactions of the iminoether derived from 2,2′-azobisisobutyronitrile with substituted alkylene diamines. The first-order rate constants for the decomposition of the azoamidinium salts varied from 0.59 × 10^?5 to 14.1 × 10^?5 s^?1 with the ring size and the alkyl substitution of the ring. Decomposition of 2,2′-azobis[2-(imidazoline-2-yl)propane] dihydrochloride was found to be accelerated by alkyl substitution on the imidazolinium ring. However, the azoamidinium compounds having larger rings, 2,2′-azobis[2-(3,4,5-trihydropyrimi-dine-2-yl)propane] dihydrochloride and 2,2′-azobis[2-(4,5,6,7-tetra-hydro-1H-1,3-diazepine-2-yl)propane] dihydrochloride, decomposed at a slower rate than the unsubstituted azobis[2-(imidazoline-2-yl)-propane] dihydrochloride. These new initiators were found to be capable of initiating radical polymerizations of acrylamide and vinyl acetate.     

Spontaneous vesicle formation and phase behavior in mixtures of an anionic surfactant with imidazoline compounds

Unexpected colloidal assemblies form in aqueous mixtures of sodium dodecylbenzenesulfonate (SDBS) with the following imidazoline compounds: 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (V-44, which is a commonly used free-radical initiator), 2,2'-tetramethylenedi-2-imidazoline (TMI), and the main recombination product (RP) from the decomposition of V-44. All of these imidazoline compounds act as hydrotropes. As the molar ratio of imidazoline to SDBS increases, a gradual transition from micelles to vesicles to bilayers to precipitate is observed. V-44 decomposes slowly at 25 degrees C, and the phase diagrams of V-44/SDBS and RP/SDBS are similar. The vesicular region observed in mixtures of TMI/SDBS is larger in composition than that of V-44/SDBS and RP/SDBS mixtures. At equimolar compositions of SDBS and RP, a novel colloidal structure with multiple closely packed bilayers is observed. In these mixtures, small unilamellar vesicles (<80 nm in diameter) form spontaneously, although with time they coexist with a small amount of precipitate and their size increases steadily. The self-assembly of vesicles occurs over a wide range of compositions when the solution pH is lower than the pK(a) of the imidazoline moiety. Quasi-elastic light scattering, cryogenic transmission electron microscopy, nuclear magnetic resonance, and small-angle neutron scattering were used to determine the characteristic length scales and properties of the assemblies.     

The Synthesis of Poly(2,6-dimethyl-1,4-phenylene oxide)/Polymethylmethacrylate Alloy in Aqueous Medium via a One-Pot Method

An environmentally friendly one-pot synthetic method based on green chemistry was developed to prepare thermodynamically partially compatible poly(2,6-dimethyl-1,4-phenylene oxide)/poly(methylmethacrylate) (PPO/PMMA) alloy in water. The oxidative polymerization of 2,6-dimethylphenol in alkaline aqueous solution was firstly conducted and then methyl methacrylate (MMA) was added into the reactor before the end of polymerization. MMA could penetrate into PPO particles and then in situ reverse atom transfer radical polymerization (RATRP) of methyl methacrylate was initiated by 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride after the oxidative polymerization. Both the oxidative polymerization of 2,6-dimethylphenol and RATRP of methyl methacrylate were catalyzed by the complex of CuCl₂ and 4-dimethylaminopyridine. Finally, thermodynamically partially compatible PPO/PMMA alloy was successfully prepared which possessed a multi-layer core-shell structure with two polymers embedded in each other.     

The direct synthesis of thioesters using an intermolecular radical reaction of aldehydes with dipentafluorophenyl disulfide in water

The combination of the water-soluble radical initiator, 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044), and surfactant, cetyltrimethylammonium bromide (CTAB), was found to be the most suitable condition for the effective direct synthesis of useful active thioesters (pentafluorophenyl thioesters) in water.     

An efficient methodology for the C-C bond forming radical cyclization of hydrophobic substrates in water: effect of additive on radical reaction in water

The combination of the water-soluble radical initiator, 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (VA-061), water-soluble chain carrier, 1-ethylpiperidine hypophosphite (EPHP) and surfactant, cetyltrimethylammonium bromide (CTAB), was found to be the most suitable condition for effective radical cyclization in water for a variety of hydrophobic substrates. The effect of additives and surfactant in the radical cyclization reaction in water was also investigated.     

A simple and efficient radical reduction using water-soluble radical initiator and hypophosphorous acid in aqueous alcohol

A simple, mild, and high-yielding procedure for the reduction of various halogenated compounds using a combination of the water-soluble radical initiator, 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (VA-061), a water-soluble chain carrier, hypophosphorous acid, and the base, triethylamine, in aqueous alcohol is described. The reagents used in this method are all water soluble, and therefore, an almost pure desired product can be readily obtained using only an extraction procedure.     

PREPARATION AND CHARACTERIZATION OF AFFINITY POLYMER BASIC MICROSPHERES BY SOAP-FREE EMULSION POLYMERIZATION

 Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presence of 2,2&#61602;-azobis(2-methylpropionamidine) dihydrochloride as an initiator. The kinetics of soap-free emulsion polymerization and the effects of polymerization factors were examined. In addition, the optimum polymerization conditions of poly(styrene-co-glycidyl methacrylate) latex microspheres for immobilization of biomolecules were obtained.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Radical grafting from glass fiber surface: Graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerization of vinyl monomers from glass fiber surface initiated by alkylazo groups introduced onto the fiber surface. The introduction of azo groups onto the glass fiber surface was achieved by reaction of isocyanate groups which were previously attached onto the surface with two kinds of azo initiators, 4,4′-azobis(4-cyanopentanoic acid) (ACPA) and 2,2′-azobis(2-cyanopropanol) (ACP). The amounts of surface azo groups introduced by ACPA and ACP were both determined to be 1.3 × 10⁻⁵ mol g⁻¹ by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was found to be initiated in the presence of the glass fiber having surface azo groups. During the polymerization, part of resultant poly(MMA) grafted onto the fiber surface through propagation of the polymer from the surface radicals produced by the decomposition of the azo groups. The percentage of grafting of poly(MMA) reached 48.1% after 24 h. The graft polymerizations of other monomers, such as styrene, N-vinylcarbazole, and acrylic acid, were also initiated by the surface azo groups, and the corresponding polymer effectively grafted onto the surface. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2121–2128, 1999     

Grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticle and carbon black surfaces

The surface grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticles and carbon black was investigated. The grafting of hyperbranched cyclotriphosphazene polymer onto these surfaces was achieved by the repeated reactions of hexachlorocyclotriphosphazene with hexamethylenediamine from surface amino groups and sodium carboxylate groups, respectively. The percentage of grafting onto silica and carbon black surfaces exceeded 760 and 390%, respectively. However, it proved difficult to achieve the theoretical growth of cyclotriphosphazene polymer from these surfaces because of steric hindrance. The introduction of sulfonic acid groups was successfully achieved by the reaction of terminal chlorophosphazene groups of the hyperbranched polymer‐grafted silica and carbon black with sulfanilic acid. The content of sulfonic acid groups introduced onto silica and carbon black surfaces was 4.98 mmol/g and 5.70 mmol/g, respectively. The sulfonated cyclotriphosphazene polymer‐grafted carbon black was extremely hydrophilic, yielding stable colloidal dispersions in polar solvents. The sulfonated cyclotriphosphazene polymer‐grafted silica and carbon black showed ionic conductivity, with the conductance increasing exponentially with increasing relative humidity and temperature. This study may offer important leads in the application of silica nanoparticles and carbon black in polymeric membranes for fuel cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4218–4226, 2008     

Structure changes on polymer blends by means of phase growth on microheterophase surface

We have studied the structural changes on poly(2-hydroxyethyl methacrylate) (PHEMA)/polystyrene (PS) blends by means of phase growth of microheterophase pattern on a template surface composed of poly[2-hydroxyethyl methacrylate (HEMA)-g-styrene (S)] graft copolymer (lamellar shape). The PS macromonomer was synthesized by free radical polymerization of S monomer initiated by a functional initiator [2,2'-azobis(2-(2-imidazolin-2-yl)propane: VA-061] in the presence of a degradative chain transfer agent, followed by an end-capping reaction with p-chloromethylstyrene (CMS). Poly(HEMA-g-S) graft copolymers were prepared by free radical copolymerization of these vinylbenzyl-terminated PS macromonomers with HEMA comonomer.     

Efficient synthesis of thioesters and amides from aldehydes by using an intermolecular radical reaction in water

The combination of the water-soluble radical initiator, 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044) and the surfactant, cetyltrimethyl-ammonium bromide (CTAB), was found to be the most suitable condition for the effective and direct synthesis of useful active thioesters (pentafluorophenyl thioesters) in water. In addition, the direct amidation of aldehydes was achieved by the addition of the amines to the thioesterification reaction mixture in water.     

聚二烯丙基甲基苄基氯化铵的合成及粘度行为

以甲胺、烯丙基氯、NaOH、氯化苄和偶氮二异丙基咪唑啉盐酸盐为原料,合成了聚二烯丙基甲基苄基氯化铵(PDAMABC),采用FT IR、1H NMR和元素分析对其结构进行表征,并考察了其在氯化钠、氯化钾、溴化钾、氯化钙、氯化镁、硫酸镁和硫酸钠溶液中的粘度行为。 将所得水相和低沸点馏分回用,二烯丙基甲基胺的收率从72.79%提高至83.41%;以水与乙醇为混合溶剂（V（H2O）∶V（C2H5OH）为1∶3~2∶3）,合成的二烯丙基甲基苄基氯化铵收率较高且水溶性好。 PDAMABC的比浓粘度随外加盐浓度增加而降低。 在0.1 mol/L NaCl溶液中,当其质量浓度低于0.031 25 g/L时,表现为聚电解质行为;质量浓度大于0.125 g/L时,表现为中性聚合物的粘度行为。 外加盐对比浓粘度的影响顺序为：Na2SO4＜NaCl＜KCl＜MgSO4＜MgCl2＜CaCl2＜KBr。 阴离子的屏蔽作用是导致比浓粘度降低的主要原因。     

Graft polymerization of methyl methacrylate from silica initiated by peroxide groups introduced onto the surface

The surface grafting onto ultrafine silica by the radical polymerization of methyl methacrylate (MMA) initiated by peroxide groups introduced onto the surface was investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. The content of diisopropylbenzene peroxide and tert-butyl peroxide groups introduced onto the silica according to the above method was determined to be 0.11 and 0.08 mmol/g, respectively. It was found that the polymerization of MMA is initiated by silica having these peroxide groups. In the polymerization, polyMMA was grafted onto silica surface: the percentage of grafting reached about 70%. Therefore, it was concluded that the polymerization of MMA is initiated by surface radicals formed by the decomposition of peroxide groups on silica and polyMMA is grafted through the propagation from the surface. During the polymerization, ungrafted polyMMA was also formed because of the formation of initiator fragments by the decomposition of peroxide groups: the grafting efficiency of the graft polymerization was 30–40%. PolyMMA-grafted silica produced a stable colloidal dispersion in organic solvents for polyMMA. © 1992 John Wiley & Sons, Inc.     

Surfactant-free emulsion copolymerization of styrene and methyl methacrylate for preparation of water-redispersible polymeric powders

Poly(methyl methacrylate), polystyrene, and poly(styrene-co-methyl methacrylate) cationically stabilized latexes with up to 25% solid content were prepared by surfactant-free emulsion polymerization (SFEP) employing 1 mol % 2,2′-azobis[2-(2-imidazolin-2-yl)propane]dihydrochloride (VA-044) as an initiator and stabilizer (inisurf) with respect to monomer at 70 °C. The latexes had 200–500 nm z-diameter and a very narrow size distribution (PDI < 0.05). The stabilizing amidinium moieties from VA-044 were covalently bound to the particles. After drying in air, poly(styrene-co-methyl methacrylate), PS-co-PMMA latexes were easily redispersible in water simply by addition of water and a few minutes of gentle stirring. The redispersed latex particles had colloidal characteristics very similar to the original latex particles in terms of polydispersity, size, and zeta potential. In contrast, latexes prepared with a similar formulation but using a conventional cationic surfactant (CTAB) that was not covalently bound to the particles were not redispersible. This is the simplest method reported so far for the preparation of redispersible latexes that do not use high stabilizer concentrations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2376–2381     

高固相含量羟基磷灰石浆料的制备及凝胶浇注成型

为提高羟基磷灰石(HAP)浆料在水分散体系中的稳定性, 获得良好的固化性能, 采用二甲基丙烯酰胺(DMAA)作为单体, N,N’-亚甲基双丙稀酰胺(MBAM)作为交联剂, 偶氮二咪唑啉丙烷(AZIP)为引发剂, 研究了不同分散剂含量和不同固相含量HAP浆料的流变性. 使用自制的亚微米级粉体原料, 制备了固相含量高达55%(体积分数)的稳定浆料, 并成功实现了浇注成型. 获得相对密度高达57.5%的素坯, 其抗压强度、抗弯强度最高值分别达到(37.0±6.5)和(13.8±1.0) MPa. 经1250 ℃无压烧结2 h, HAP陶瓷具有优良的烧结性能, 相对密度为98.7%, 抗弯强度和弹性模量分别达到了(85.3±9.9) MPa 和(133.0±10.2) GPa.     

RAFT-mediated polystyrene-clay nanocomposites prepared by making use of initiator-bound MMT clay

The initiator 2,2′-azobis(2-(1-(2-hydroxyethyl)-2-imidazolin-2-yl)propane)dihydrochloride monohydrate (VA060) was used to surface-modify sodium montmorillonite clay (Na-MMT). The obtained organically modified clay was then used as a macro-initiator in the preparation of polystyrene-clay nanocomposites by in situ free radical polymerization of styrene in bulk. The polymerization was carried out in the presence of various reversible addition-fragmentation chain transfer (RAFT) agents: 1,4-phenylenebis(methylene)dibenzenecarbodithioate (PCDBDCP), didodecyl-1,4-phenylenebis(methylene)bistrithiocarbonate (DCTBTCD) and 11-(((benzylthio)-carbonothioyl)thio)undecanoic acid (BCTUA). All of the nanocomposites prepared were found to have intercalated morphologies. In the absence of RAFT agents, typical uncontrolled free radical polymerization occurred, giving polystyrenes with high molar masses and high polydispersity indices. In contrast, when the polymerization was conducted in the presence of any of the RAFT agents, the polymerization was found to occur in a controlled manner, as the polystyrene-clay nanocomposites obtained contained polymer chains of narrow polydispersities. The influences of clay loading and molar mass on thermal stability of the polystyrene-clay nanocomposites were investigated. Increases in the clay loading or the molar masses resulted in improvement of the thermal stability of the nanocomposites.