Gemini表面活性剂(12-6-12)和DNA的相互作用

应用紫外光谱、荧光探针、zeta 电位、动态光散射和凝胶电泳等方法探讨了阳离子gemini 表面活性剂C₁₂H₂₅N⁺(CH₃)₂―(CH₂)₆―(CH₃)₂N⁺C₁₂H₂₅·2Br^-(12-6-12)与DNA之间的相互作用. 研究结果表明, 与传统表面活性剂相比, 偶联表面活性剂特殊的分子结构使其与DNA的作用更强烈. DNA引导表面活性剂在其链周围形成类胶束结构, 开始形成类胶束时对应的表面活性剂临界聚集浓度(CAC)比纯表面活性剂临界胶束浓度(CMC)低两个数量级. CAC与DNA的浓度无关, 而与表面活性剂之间的疏水作用以及表面活性剂与DNA之间的静电吸引作用密切相关. Zeta 电位和凝胶电泳结果显示了DNA链所带负电荷逐渐被阳离子表面活性剂中和的过程. 借助原子力显微镜(AFM)成功观察到了松散的线团状DNA, 球状体随机地分散在DNA链上形成类似于串珠的结构、尺寸较大的球形复合物以及其由于吸附多余的表面活性剂重新带正电而被溶解得到的较小DNA/12-6-12聚集体. 圆二色(CD)光谱结果显示, 12-6-12可以诱导DNA的构象发生改变.     

Determination of critical micelle concentration values by capillary electrophoresis

An improved, simple capillary electrophoresis method for the determination of critical micelle concentration values in an easy way by plotting the corrected electric current values versus the surfactant concentrations at a given field was described. The critical micelle concentrations of sodium dodecyl sulfate in different solutions were obtained, and the values were in good agreement with those found in the literature. The text was submitted by the authors in English.     

Electrophoretic properties of dodecyltrimethylammonium bromide micelles in KBr solution

Charge in ionic micelles determines the trends of their stability and their practical applications. Charge can be calculated from zeta potential (zeta) measurements, which, in turn, can be obtained by Doppler microelectrophoresis. In this study, the electrophoretic properties of dodecyltrimethylammonium bromide (DTAB) in KBr aqueous solution (0-6 mM) were determined by Doppler microelectrophoresis. At very low surfactant concentrations (up to 6 mM), zeta potential was quite constant and due to the ionized monomers (DTA+). Above 6 mM, zeta potential increased to a maximum at surfactant concentrations still below the critical micellar concentration (CMC). This increase could be explained by a formation of nonmicellar aggregates of DTAB. Then, above the CMC, zeta potential underwent an abrupt reduction, which was dependent qualitatively and quantitatively on KBr concentration, and which could be due to an increase of the number of counterions adsorbed on the micelle surface. Calculation of effective micellar charge from zeta potential gave the surface charge density. Comparing this value with the theoretical, obtained from geometrical considerations, a fraction of 0.29 of charged micellar headgroups was obtained when DTAB was in aqueous solution, which is consistent with the value obtained by conductivity measurements.     

The effects of ionization on micelle size of dimethyldodecylamine oxide

Light scattering from aqueous NaCl solutions of dimethyldodecylamine oxide has been measured at different degrees of neutralization adjusted by addition of HCl, and molecular weights of differently charged micelles are determined from the Debye plot. In the absence of added salt, the micelle molecular weight decreases with increasing ionization, indicating the electrostatic effect in micelle formation. In the presence of NaCI above 0.01 M, however, the largest micelle is formed at half-ionization, and its size steeply increases with increasing NaCI concentration. In 0.20 M NaCl the large micelle is composed of about 300 ionized and 300 nonionic molecules, and it grows further with increasing surfactant concentration.     

Hybrid particles of polystyrene and carboxymethyl cellulose as substrates for copper ions

The synthesis of hybrid particles was carried out by emulsion polymerization of styrene in complexes formed by carboxymethyl cellulose (CMC), a polyanion, and a cationic surfactant, cetyltrimethylammonium bromide (CTAB). CMC chains with variable molecular weights and degrees of substitution were tested. The polymerization condition chosen was that corresponding to CMC chains fully saturated with CTAB and to the onset of pure surfactant micelle formation, namely, at the critical aggregation concentration. The hybrid particles were characterized by zeta potential and light scattering measurements. The period of colloidal stability in the ionic strength of 2.0 mol L(-)(1) NaCl was observed visually. Upon increasing the CMC chain length, the particle characteristics remained practically unchanged, but the colloid stability was increased. The increase in the CMC degree of substitution led to particles with more negative zeta potential values. The adsorption of copper ions (Cu(2+)) on the surface of hybrid particles could be described by the Langmuir model, as determined by potentiometric measurements. The increase in the mean zeta potential values and X-ray absorption near-edge spectra evidenced the immobilization of Cu(2+) ions on the hybrid particles.     

Rapid determination of the critical micelle concentration by Taylor dispersion analysis in capillaries using both direct and indirect detection

The critical micelle concentration is a basic characteristic of surfactants. In this article, the process of formation of micelles is studied by Taylor dispersion analysis using capillary electrophoresis instrumentation as a substituent of capillary liquid chromatography. New methods for determination of critical micelle concentration are presented. Sodium octylbenzene sulfonate and sodium dodecylsulfate are used as model compounds with and without chromophore. Two novel approaches based on indirect ultraviolet detection and indirect Taylor dispersion analysis with direct ultraviolet detection are introduced for the determination of critical micelle concentration value of surfactant without any chromophore. The determined critical micelle concentration values are in correspondence with the tabulated values at 95% confidence level.     

Zeta potential of dodecyltrimethylammonium hydroxide micelles in water

 The electrophoretical mobility of dodecyltrimethyl-ammonium hydroxide micelles has been measured at two different concentrations giving values similar to that determined in other surfac-tants. There is a good agreement between micelle ionization degrees computed from zeta potential measurements and those from ion-selective electrodes experiments. This demonstrates that electrophoresis experiments may be replaced by the simpler ion-selective electrode measurements to determine micelle surface potential. It has also been concluded that ion-selective electrodes detect only the non-micellised ions, that only free ions contribute to the intermicellar solution ionic strength, and micelles do not affect the result, and that the dependence of the electrophoretic mobility on the soap concentration is due to the reduction of the micelle net charge when the ionic strength of the intermicellar solution arises. Received: 2 December 1996 Accepted: 24 February 1997     

Near-Infrared Hydrophobic Probes as Molecular Light Switch for CMC Determination of Triton X-100 Solution

The fluorescence behavior of two near-infrared (NIR) chromophores with linear alkyl chains of different lengths, 2-[4′chloro-7′(3″ethyl-2″benzothiaolinylidene)-3′,5′-(1″′3′″-propanediyl)-1′3′,5′-heptantriene-1′-yL]-3-ethylbenzothiazolium iodide (Probe Ⅰ) and 2-[4′chloro-7′(3″hexadecyl-2″benzothiazolinylidene)-3′,5′-(1′″,3′″-propanediyl)-1′,3′,5′-heptantriene-1′-yl]-3-ethylbenzothiazolium iodide (Probe Ⅱ), in aqueous solution containing different concentrations of surfactants was studied. The fluorescence of the probe with a short chain (probe Ⅰ) was completely quenched in water and aqueous solution containing a low concentration (below the critical micelle concentration,CMC) of surfactant Triton X-100. However, the fluorescence reappeared and reached maximum rapidly once the concentration of the surfactant approached the CMC. The probe with a long chain (probe II) displayed a similar fluorescence behavior but more dramatically fluorescent recovery in Triton X-100 system, which gave a direct in- dication for the micelle forming process and provided a simple method for the determination of the critical micelle concentration of the surfactant. The CMC values determined by this method were in good agreement with those obtained by other techniques. The fluorescence behavior of the two probes in other surfactant systems was also investigated.     

Solvation of ions in hydrophilic layer of polyoxyethylated nonionic micelle. Cooperative approach by electrophoresis and ion-transfer voltammetry

Electrophoretic measurements of micellar mobility have revealed that polyoxyethylated nonionic surfactant micelles have negative zeta potential in various electrolytes, indicating that the partition of anions into the micelle dominates the entire electrolyte partition and the induced surface potential of the micelle. Although an excess of a negative charge is thus revealed in the micelle, it is uncertain whether anions are preferably solvated in the micelles or cations are expelled from the micelles. To determine the solvation energies of single ions in the hydrophilic layer of the micelle, we have performed ion transfer voltammetric measurements at microinterfaces between nitrobenzene and aqueous tetraethyleneglycol solution, which acts as a model for the palisade layer of the micelles. The cooperative utilization of these different methods has allowed us to determine the Gibbs free energy of transfer of a single ion without an extrathermodynamic assumption. On the basis of the resulting values, the partition of ions and the zeta potential induced by the imbalance of anionic and cationic partition have been quantitatively explained.     

Determination of critical micelle concentrations of ionic and nonionic surfactants based on relative viscosity measurements by capillary electrophoresis

The critical micelle concentration (CMC) can be obtained by measuring the distinct physical properties of surfactant molecules in the monomeric and micellar states. In this study, two linear increments of relative viscosity with distinct slopes were obtained when increasing surfactant concentrations from dilute solution to above the CMC, which was then determined by the intersection of the two linear extrapolations. Using a capillary electrophoresis (CE) instrument and Poiseuille’s law, the viscosities of surfactants at a series of concentrations covering the monomeric and micellar regions could be obtained by measuring the hydrodynamic flow rates of the corresponding surfactant solutions. We applied this method to determine the CMC values of various types of surfactants including anionic, cationic, zwitterionic, and nonionic surfactants. The resulting CMC values were all in good agreement with those reported in literature. Using this method, the multiple-stage micellization process of a short-chain surfactant was revealed. We have also demonstrated that the CE-based viscometer was applicable to the study of CMC variation caused by organic or electrolyte additives.     

用弱电解质理论研究水溶液中SDS胶团的电离行为

在临界胶团浓度以上,十二烷基硫酸钠(SDS)在溶液中形成聚集态的胶团,从而表现出不同于一般强电解质的电导行为.针对这一特点提出了一种胶团电离模型,即将胶团作为一种弱电解质,用弱电解质电导理论来描述其溶液电导的变化规律,导出SDS胶团电离度的计算式,并得到该溶液电导实测数据的验证.     

Simultaneous control of electrostatic micellar partition and electroosmotic flow-rate by anion-dominated partition into zwitterionic micelles

The zeta potentials of zwitterionic micelles and capillary walls have been evaluated with capillary electrophoresis. The zeta potential of the micelles is predominantly determined by the nature of anions, while cations of identical valence have marginal effects; the linear relation has been found between the induced zeta potential and the hydration energy of an anion. The zeta potential of the capillary wall is also varied with anionic natures, and there is a good correlation between micellar and capillary wall zeta potential. This strongly suggests that the zeta potential of capillary walls is determined by the partition of anions into the surfactant layer formed on the capillary wall. Thus, we can simultaneously control both the electroosmotic flow-rate and micellar surface potential (in turn electrostatic interaction between micelles and ionic solutes) by varying the type and concentration of electrolytes. This idea has been applied to the separation of aromatic cationic solutes.     

A molecular dynamics study of free energy of micelle formation for sodium dodecyl sulfate in water and its size distribution

Free energy of micelle formation has been evaluated for spherical sodium dodecyl sulfate (SDS) in water by a thermodynamic integration method combined with a series of large-scale molecular dynamics calculations following the chemical species model. In particular, free energy change delta mu(n+1)0 with respect to the addition of one surfactant molecule to the spherical micelle of size n was obtained as a function of n. The free energy profile showed a minimum followed by a maximum, which corresponds to a peak in the size distribution. The calculated peak size n = 57 near its critical micelle concentration is in good agreement with the experimental averaged aggregation number n = 55-75 of the SDS micelle. The distribution showed a rather sharp peak, indicating that the size is almost a monodisperse one. The size is likely to be insensitive to the total concentration of the surfactant.     

Influence of cetyltrimethylammonium bromide on physicochemical properties and microstructures of chitosan-TPP nanoparticles in aqueous solutions

The nanoparticles of chitosan (CS) were prepared using pentasodium triphosphate (TPP) as a crosslinking agent and the influences of cetyltrimethylammonium bromide (CTAB) on the physicochemical properties of the CS-TPP nanoparticles were first studied by laser light scattering, zeta potential, and transmission electron microscopy (TEM). The concentration played a significant role in controlling the particle size of CS and the overlap concentration c(*) was testified to be about 1.0 mg/mL. The combination of static light scattering (SLS) and dynamic light scattering (DLS) allowed us to obtain more information about the CS-TPP nanoparticles in the presence of surfactant molecules. The addition of CTAB could reduce the hydrodynamic diameter of nanoparticles effectively in the salt solutions and simultaneously increase the zeta potential of the nanoparticles. The effect of CTAB concentration on the size of CS-TPP nanoparticle was also examined. The critical micelle concentration (CMC) of CTAB was used to interpret the complicated complex formed by the polyelectrolyte and the surfactant. Finally, TEM was used to observe the CS-TPP nanoparticles, which were affected by CTAB, to verify the results obtained by light scattering.     

Pseudo-homogeneous micelle extraction of ion-associates formed between tetrabutylammonium ion and some aromatic sulfonate ions into nonionic surfactant micelle studied through the mobility measurements in capillary zone electrophoresis

Ion-association extraction of some aromatic sulfonate ions including alkylbenzene sulfonates with tetrabutylammonium ion (TBA+) into nonionic surfactant micelle has been investigated through the changes in the electrophoretic mobility. Nonionic surfactants of Brij 35 and Brij 58 were used as micelle substrates to which the ion-associates formed could distribute. The electrophoretic mobility of the aromatic sulfonate ions was measured by capillary zone electrophoresis in the presence of TBA+ and/or the nonionic surfactant to determine ion-association constants (K(ass)), binding constants of the anions to the nonionic surfactant micelle (K(B)), and binding constants of the ion-associates to the nonionic surfactant micelle (K(B,IA)). Nonlinear phenomena induced with the alkyl chain moiety were observed on K(ass) and K(B) by its linear structure and the mixed micelle formation, respectively. Larger K(B) values were obtained with Brij 58 as micelle matrix than with Brij 35, while the differences in K(B,IA) were small between Brij 58 and Brij 35.     

Optimization strategies in micellar electrokinetic capillary chromatography

Summary Computer-assisted procedures for the one-parameter optimization of the surfactant concentration and the concentration of urea or D-glucose as modifiers in micellar electrokinetic capillary chromatography have been developed. These procedures permit a rapid optimization of one parameter on the basis of only two experiments. Predicted values are compared to empirically obtained optimum values. The influence of the modifier concentration on the critical micelle concentration of sodium dodecyl sulfate was experimentally determined in buffers commonly employed in micellar electrokinetic chromatography. The alteration of retention factors of solutes caused by the influence of urea addition on the critical micelle concentration of sodium dodecyl sulfate was calculated under the assumption of constant distribution coefficients and compared to experimentally obtained values. It was demonstrated that the addition of urea or of D-glucose does not alter the phase ratio substantially.     

Interactions and influence of α-cyclodextrin on the aggregation and interfacial properties of mixtures of nonionic and zwitterionic surfactants

The interactions of α-cyclodextrin (α-CD) with the nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) and the zwitterionic surfactant dimethyldodecylammoniopropanesulfonate (DPS) in their mixed system have been studied using interfacial tension, fluorescence, and nuclear magnetic resonance measurements. From the plots of interfacial tension vs. log of total surfactant concentration, we have obtained values of the surface excess of surfactant, the critical micellar concentration (cmc), the standard free energy of micelle formation, and association constant of surfactant/α-CD inclusion complexes (assuming a 1:1 stoichiometry). A comparison of the K _a values obtained for the interaction between α-CD and DPS and Mega-10, respectively, shows that DPS interacts stronger with α-CD than Mega-10. The experimental mixed cmc was analyzed by the pseudophase separation model and regular solution theory for the evaluation of ideality or nonideality of the mixed micelle formation. The interaction parameters in the mixed micelle and the micelle composition at different mole fractions of DPS were also computed. The fluorescence anisotropy (r) values of rhodamine B decreases with the increase of α-CD concentrations.     

Dispersion stability of a ceramic glaze achieved through ionic surfactant adsorption

The adsorption of cetylpyridinium chloride (CPC) and sodium dodecylbenzenesulfonate (SDBS) onto a ceramic glaze mixture composed of limestone, feldspar, quartz, and kaolin has been investigated. Both adsorption isotherms and the average particle zeta potential have been studied in order to understand the suspension stability as a function of pH, ionic strength, and surfactant concentration. The adsorption of small amounts of cationic CPC onto the primarily negatively charged surfaces of the particles at pH 7 and 9 results in strong attraction and flocculation due to hydrophobic interactions. At higher surfactant concentrations a zeta potential of more than +60 mV results from the bilayered adsorbed surfactant, providing stability at salt concentrations < or = 0.01 M. At 0.1 M salt poor stability results despite substantial zeta potential values. Three mechanisms for SDBS adsorption have been identified. When anionic SDBS monomers either adsorb by electrostatic interactions with the few positive surface sites at high pH or adsorb onto like charged negative surface sites due to dispersion or hydrophobic interactions, the magnitude of the negative zeta potential increases slightly. At pH 9 this increase is enough to promote stability with an average zeta potential of more than -55 mV, whereas at pH 7 the zeta potential is lower at about -45 mV. The stability of suspensions at pH 7 is additionally due to steric repulsion caused by the adsorption of thick layers of neutrally charged Ca(DBS)2 complexes created when the surfactant interacts with dissolved calcium ions from the calcium carbonate component.     

Determination of the second critical micelle concentration of benzyldimethyltridecylazanium chloride in aqueous solution by acoustic and conductometric measurements

Density, speed of sound, and conductivity of benzyldimethyltridecylazanium chloride as a cationic surfactant in aqueous solutions have been measured as a function of concentration at atmospheric pressure and at five temperatures (293.15, 298.15, 303.15, 308.15, and 313.15) K. Isentropic compressibility values have also been calculated from the experimental density and speed of sound results. The critical micelle concentration (cmc) values of investigated cationic surfactant were evaluated by using conductivity measurements. The speed of sound, isentropic compressibility and also the conductivity values of the solutions have been employed to determine the second critical micelle concentrations (2nd cmc). The temperature dependence of the speed of sound and isentropic compressibility is shown to be sensitive to the aggregation process. The 2nd cmc values of the surfactant obtained at different temperatures by conductivity, speeds of sound and isentropic compressibility data are in agreement with each other.     

Determination of the critical premicelle concentration, first critical micelle concentration and second critical micelle concentration of surfactants by resonance Rayleigh scattering method without any probe

The purpose of this work is to determine the values of critical premicelle concentration (CPMC), first critical micelle concentration (FCMC) and second critical micelle concentration (SCMC) of surfactants using a common spectrofluorophotometer by recording resonance Rayleigh scattering (RRS) signal without any probe. The plot of the RRS intensities at the maximum scattering wavelength (I(RRS)(max)) versus surfactant concentrations (c) was constructed to obtain the I(RRS)(max)-c curve. From the inflexions in I(RRS)(max)-c curve, the CPMC, FCMC and SCMC values of a surfactant can be obtained sensitively. The FCMC of some anionic, cationic and nonionic surfactants such as sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC), Tween-20, and Tween-80 were determined by RRS method and the values are in good agreement with those obtained from conductivity and surface tension measurements and literature values. The CPMC and SCMC of SDS and CTAB were also determined by RRS method respectively and the values conform to literature values too. Furthermore, RRS method can also be used to determine the FCMC of an amphiphilic macromolecule-hemoglobin, whose structure resembles a surfactant. From the experimental results, it is concluded that RRS method can be applied to the simultaneous determination of the CPMC, FCMC and SCMC values in a sensitive, accurate and no probe way.