Photofragmentation of phase-transferred gold nanoparticles by intense pulsed laser light

Gold nanoparticles with an average diameter of approximately 20 nm were prepared in an aqueous solution by a wet chemistry method. The parent gold nanoparticles were then capped with a 4-aminothiophenol protecting layer and transferred into toluene by tuning the surface charge of the modified nanoparticles. Gold nanoparticles before and after phase transfer were subjected to photofragmentation by a pulsed 532 nm laser. The effects of solvent properties and surface chemistry on the photofragmentation of the gold nanoparticles have been investigated. Fast photofragmentation has been observed in the organic solvent in which the dielectric constant, heat capacity, and thermal conductivity are lower. The results suggest new approaches for the preparation of very small gold clusters from gold nanoparticles.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Enzyme‐Responsive Intracellular‐Controlled Release Using Silica Mesoporous Nanoparticles Capped with ε‐Poly‐L‐lysine

The synthesis and characterization of two new capped silica mesoporous nanoparticles for controlled delivery purposes are described. Capped hybrid systems consist of MCM‐41 nanoparticles functionalized on the outer surface with polymer ε‐poly‐L ‐lysine by two different anchoring strategies. In both cases, nanoparticles were loaded with model dye molecule [Ru(bipy)₃]²⁺. An anchoring strategy involved the random formation of urea bonds by the treatment of propyl isocyanate‐functionalized MCM‐41 nanoparticles with the lysine amino groups located on the ε‐poly‐L ‐lysine backbone (solid Ru‐rLys‐S1 ). The second strategy involved a specific attachment through the carboxyl terminus of the polypeptide with azidopropyl‐functionalized MCM‐41 nanoparticles (solid Ru‐tLys‐S1 ). Once synthesized, both nanoparticles showed a nearly zero cargo release in water due to the coverage of the nanoparticle surface by polymer ε‐poly‐L ‐lysine. In contrast, a remarkable payload delivery was observed in the presence of proteases due to the hydrolysis of the polymer’s amide bonds. Once chemically characterized, studies of the viability and the lysosomal enzyme‐controlled release of the dye in intracellular media were carried out. Finally, the possibility of using these materials as drug‐delivery systems was tested by preparing the corresponding ε‐poly‐L ‐lysine capped mesoporous silica nanoparticles loaded with cytotoxic drug camptothecin (CPT), CPT‐rLys‐S1 and CPT‐tLys‐S1 . Cellular uptake and cell‐death induction were studied. The efficiency of both nanoparticles as new potential platforms for cancer treatment was demonstrated.     

Thermosensitive pluronic micelles stabilized by shell cross-linking with gold nanoparticles

Gold nanoparticles were employed to prepare shell cross-linked Pluronic micelles that exhibit a reversibly thermosensitive swelling/shrinking behavior. Two terminal hydroxyl groups of Pluronic F127 were thiol-functionalized to form self-assembling Pluronic micelles in aqueous solution with exposed -SH groups in an outer shell layer. The thiol groups present in the outer shell were cross-linked by gold nanoparticles synthesized through NaBH4 reduction of gold precursor anions. The resultant shell cross-linked gold-Pluronic micelles exhibited a temperature-dependent volume transition: their hydrodynamic diameter was changed from 157.1 +/- 15.6 nm at 15 degrees C to 53.4 +/- 5.5 nm at 37 degrees C as determined by dynamic light scattering. The critical micelle temperature measured by a pyrene solubilization technique suggested that the reversible swelling/shrinking behavior of the micelles was caused by hydrophobic interactions of cross-linked or grafted Pluronic copolymer chains in the micelle structure with increasing temperature. Transmission electron microscopy directly revealed that the shell cross-linked micelles were indeed produced by gold nanoparticles covalently clustered on the surface. These novel self-assembled organic/inorganic hybrid micelles would hold great potential for diagnostic and therapeutic applications.     

Enhanced resonance light scattering properties of gold nanoparticles due to cooperative binding

The interaction of 11-mercaptoundecanoic acid capped gold nanoparticles (MUA-GNPs) with europium ions and aminoacids has been studied by UV-Vis spectrophotometry, fluorescence, confocal fluorescence microscopy, resonance light scattering and TEM. Results demonstrated that hyper-Rayleigh scattering emission occurs upon the addition of lysine to the MUA-GNPs–Eu(III) system, thus providing an inherently sensitive method for lysine determination. The effects of geometrical factors of the gold nanoparticles (aspect ratio, particle size, cluster formation) and the surrounding medium (pH) on this behavior are discussed. The cooperative binding interactions of Eu³⁺ and lysine with gold nanoparticles permitted the discrimination of lysine from other amino acids. The probable mechanism for the spectral changes and the enhanced resonance light scattering observed is outlined. Figure Gold nanoparticle resonance light scattering plasmon enhancement through cooperative binding with europium and lysine     

金纳米粒子与蛋白质的相互作用及其应用

金纳米粒子与蛋白质间存在多种作用方式,包括物理吸附、化学共价结合以及非共价特异性吸附等.金纳米粒子表面等离子体共振效应引起可见光区的特征吸收及表面增强拉曼散射,常用来研究金纳米粒子与蛋白质间的相互作用.金纳米粒子与蛋白质间的作用与纳米粒子的尺寸、表面化学及蛋白质的大小、电荷、氨基酸残基有关.利用金纳米粒子与蛋白质的相互作用及纳米金的谱学性质,可以对疾病或环境污染进行简单、高效、低成本检测,也可用于疾病治疗.     

Phase transfer of large gold nanoparticles to organic solvents with increased stability

In this paper, we describe a new procedure to phase transfer large gold nanoparticles (diameters > 45 nm) from aqueous solution to organic solvents. This is accomplished using a covalent amide coupling reaction that incorporates dicyclohexylamine (DCHA) headgroups on the surface of mercaptoacetic acid (MAA) functionalized gold nanoparticles. Gold nanoparticles are first synthesized in aqueous solution by the citrate-reduction method, and nanoparticle size is controlled by the molar ratio of the reducing agent (sodium citrate) and the gold precursor (KAuCl4). MAA is then adsorbed to the surface of the gold nanoparticles followed by an amide-coupling reaction to covalently attach DCHA to the surface-immobilized MAA. The bulky dicyclohexyl groups entropically stabilize gold nanoparticles in organic solvents. This procedure was used to reliably transfer gold nanoparticles with diameters between 45 and 100 nm from aqueous solution to organic solvents such as dimethyl sulfoxide and chloroform.     

In situ synthesis of water dispersible bovine serum albumin capped gold and silver nanoparticles and their cytocompatibility studies

A simple and convenient one step room temperature method is described for the synthesis of bovine serum albumin (BSA) capped gold and silver nanoparticles. BSA reduces silver ions to silver nanoparticles but does not directly reduce gold ions to gold nanoparticles at room temperature and varying pH conditions. However, when silver and gold ions are simultaneously added to BSA, silver ions get reduced to metallic silver first and these in turn reduce gold ions to gold nanoparticles through a galvanic exchange reaction. The so synthesized silver and gold nanoparticles are easily water dispersible and can withstand addition of salt even at high concentrations. It is shown that the capped protein retains its secondary structure and the helicity to a large extent on the nanoparticles surface and that the protein capping makes the nanoparticles cytocompatible.     

Effect of Gold Nanosphere Surface Chemistry on Protein Adsorption and Cell Uptake In Vitro

Gold nanoparticles exhibit unique spectral properties that make them ideal for biosensing, imaging, drug delivery, and other therapeutic applications. Interaction of gold nanoparticles within biological environments is dependent on surface characteristics, which may rely on particular capping agents. In this study, gold nanospheres (GNS) synthesized with different capping agents??specifically citric acid (CA) and tannic acid (TA)??were compared for serum protein adsorption and cellular uptake into a lung epithelial cell line (A549). Both GNS samples exhibited noticeable protein adsorption based on surface charge data after exposure to serum proteins. Light scattering measurements revealed that GNS-CA-protein composites were smaller and less dense compared to GNS-TA-protein composites. The cell uptake characteristics of these nanoparticles were also different. GNS-CA formed large clusters and elicited high uptake, while GNS-TA were taken up as discrete particles, possibly through nonendosomal mechanisms. These results indicate that the capping agents used for GNS synthesis result in unique biological interactions.     

Synthesis of Polynucleotide Modified Gold Nanoparticles as a High Potent Anti‐Cancer Drug Carrier

Gold nanoparticles have been developed for the photoacoustic imaging, delivery of genes and laser induced photothermal therapy. In this study, we have developed oligonucleotide conjugated gold nanoparticles as the carrier for simultaneous DNA and anti‐cancer nucleoside delivery. The polynucleotidenanoparticle complex presented higher capacity in carrying 5‐FU anti‐cancer compounds than the original gold particles. The hydrodynamic size of the gold nanoparticles increased from 25 to 35 nm with an increase in the negative surface charge from ?9.58 to 21.66 mV after polynucleotide conjugation and drug loading. A positive association between environmental pH and drug release was observed in PBS, which implied their potential use in the controlled localized drug release in the lower GI tract. The MTT assay revealed dose dependent cytotoxicity to colon cancer cell line than free compounds. These results suggest the potential use of this new polynucleotide‐gold nanoparticles complex as the environmental controlled anti‐cancer nanocapsule, especially suitable for per oral colon cancer chemotherapy.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

Synthesis and capping of water-dispersed gold nanoparticles by an amino acid: bioconjugation and binding studies

We report a novel strategy for the synthesis of aqueous stable, carboxylated gold nanoparticles (GNPs) by using glutamic acid as the reducing agent. The ratio of chloroaurate ions, AuCl(-)(4) to glutamic acid was optimized in the reaction medium to obtain monodispersed GNPs. Glutamic acid reduced gold nanoparticles were characterized by UV-visible, FTIR, dynamic light scattering and transmission electron microscopy, which demonstrated high stability in aqueous solution over a period of time indicating stabilization via surface-bound amino acid. Functionalized nanoparticles were conjugated with protein molecules through electrostatic attraction between the surface-terminated negatively charged carboxylate groups (COO(-)) of glutamic acid and the positively charged amino groups (NH(+)(3)) of the protein. The conjugation efficiency of the GNP:protein conjugates was confirmed qualitatively and quantitatively through gel electrophoresis and critical flocculation concentration analysis. The interaction between functionalized GNPs with protein molecules was investigated using fluorescence spectroscopy showing the fluorescence quenching of the tryptophan residues of protein molecules after conjugation. Circular dichroism (CD) studies of the conjugates confirmed that the protein undergoes a more flexible conformational state on the boundary surface of GNPs after conjugation. There was substantial conformational transition from alpha-helix to beta-sheet structure after conjugation of protein to GNPs.     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Bioreactive surfaces prepared via the self-assembly of dendron thiols and subsequent dendrimer bridging reactions

Here, we report a novel route to prepare bioreactive surfaces on gold by the self-assembly of generation-three hydroxyl-terminated dendron thiols (G3-OH) and subsequent bridging reactions using generation-two amine-terminated dendrimers (G2-NH(2)). It has been shown that G3-OH dendron thiols form a stable and uniform self-assembled monolayer on gold, which can be activated by the homobifunctional cross-linker N,N-disuccinimidyl carbonate (DSC). Subsequent derivatization of the activated monolayer via dendrimer bridging reactions with G2-NH(2) enhances the stability, reactivity, and versatility of the prepared surface. Each step of the surface formation reaction has been monitored, and the resulting surface has been characterized by wetting, electrochemistry, scanning tunneling microscopy (STM), and infrared (IR) spectroscopy measurements. The reactivity of this surface was demonstrated by a Schiff base coupling reaction with 4-cyanobenzaldehyde, by immobilizing biotin molecules onto the peripheral amine groups using one of the conjugation methods, and by further binding avidin onto the biotinylated surface. We believe that the prepared bioreactive surface with a high density of amine groups will be useful for the immobilization of biological macromolecules for various biosensor applications, such as the fabrication of DNA microarrays and protein chips.     

Make conjugation simple: a facile approach to integrated nanostructures

We report a facile approach to the conjugation of protein-encapsulated gold fluorescent nanoclusters to the iron oxide nanoparticles through catechol reaction. This method eliminates the use of chemical linkers and can be readily extended to the conjugation of biological molecules and other nanomaterials onto nanoparticle surfaces. The key to the success was producing water-soluble iron oxide nanoparticles with active catechol groups. Further, advanced electron microscopy analysis of the integrated gold nanoclusters and iron oxide nanoparticles provided direct evidence of the presence of a single fluorescent nanocluster per protein template. Interestingly, the integrated nanoparticles exhibited enhanced fluorescent emission in biological media. These studies will provide significantly practical value in chemical conjugation, the development of multifunctional nanostructures, and exploration of multifunctional nanoparticles for biological applications.     

Tetrazine Click Chemistry for the Modification of 1‐Hydroxy‐1,1‐methylenebisphosphonic Acids: Towards Bio‐orthogonal Functionalization of Gold Nanoparticles

Inverse electron demand Diels–Alder (iEDDA) was evaluated for the functionalization of gold nanoparticles. The reaction was first modelled with the free coating molecule 1‐hydroxy‐1,1‐methylenebisphosphonate bearing an alkene functionality (HMBPene). A model tetrazine 3,6‐dipyridin‐2‐yl‐1,2,4,5‐tetrazine (pyTz) was used, kinetic of the reaction was calculated and coupling products were analysed by NMR and HRMS. The reaction was then transposed at the nanoparticle surface. Gold nanoparticles bearing an alkene functionality were obtained using a one‐pot methodology with HMBPene and the tetrazine click chemistry was evaluated at their surface using pyTz. The successful coupling was assessed by XPS measurements. This click‐methodology was extended to the conjugation of a NIR probe at the NP surface.     

Monofunctionalized Gold Nanoparticles Stabilized by a Single Dendrimer Form Dumbbell Structures upon Homocoupling

The assembly of dumbbell structures as organic-inorganic hybrid materials is presented. Gold nanoparticles (NPs) with a mean diameter of 1.3 nm were synthesized in very good yields using a stabilizing dendrimer based on benzylic thioether subunits. The extended dendritic ligand covers the NP surface and contains a peripheral protected acetylene, providing coated and monofunctionalized NPs. These NPs themselves can be considered as large molecules, and thus, applying a wet-chemical deprotection/oxidative acetylene coupling protocol exclusively provides dimers of NPs interlinked by a diethynyl bridge. The concept not only enables access to novel organic/inorganic hybrid architectures but also promises new approaches in labeling technology.     

Noble-metal nanoparticles directly conjugated to globular proteins

We report the synthesis of gold nanoparticles directly conjugated to bovine serum albumin protein by chemical reduction in aqueous solution. Transmission electron microscopy reveals that the gold nanoparticles are well dispersed with an average diameter less than 2 nm, and elemental analysis verifies the composition of the gold-protein conjugates. Infrared spectroscopy confirms that the polypeptide backbone is not cleaved during the conjugation process and that the side chain functional groups remain intact. Raman spectroscopy demonstrates that the disulfide bonds in the conjugated protein are broken and thus are available for interaction with the nanoparticle surface. This synthesis method is a new technique for directly attaching gold nanoparticles to macromolecular proteins.     

Strong deaggregating effect of a novel polyamino resorcinarene surfactant on gold nanoaggregates under microwave irradiation

Gold nanoparticles were prepared by ethylene glycol (EG) reducing gold chloride under microwave irradiation. The EG-stabilized gold colloids varied from red to blue with increasing amounts of EG, due to particle aggregation. Addition of the macrocyclic polyamine 2,8,14,20-tetranonyl-4,6,10,12,16,18,22,24-octa(1-aminoethylcarbamoyl)methoxyresorcinarene (TNMR) reversed nanoparticle aggregation under microwave irradiation and greatly improved their dispersion stability in aqueous solutions. These effects are likely due to the amphiphilic nature of TNMR, which has a large hydrophilic headgroup with eight amino groups and four hydrophobic chains. Moreover, the large and flexible hydrophilic groups containing more N and O atoms in the TNMR molecule has a strong stretching and penetrating ability in the aqueous solution, and TNMR molecules can easily form a bilayer protecting structure on the surface of gold nanoparticles, which plays a critical role in the color-change process of the EG-stabilized gold colloid.     

Drug Delivery Nanocarriers from a Fully Degradable PEG‐Conjugated Polyester with a Reduction‐Responsive Backbone

The remarkably high intracellular concentration of reducing agents is an excellent endogenous stimulus for designing nanocarriers programmed for intracellular delivery of therapeutic agents. However, despite their excellent biodegradability profiles, aliphatic polyesters that are fully degradable in response to the intracellular reducing environment are rare. Herein, a reduction‐responsive drug delivery nanocarrier derived from a linear polyester bearing disulfide bonds is reported. The reduction‐responsive polyester is synthesized via a convenient polycondensation process. After conjugation of terminal carboxylic acid groups of polyester to polyethylene glycol (PEG), the resulting polymer self‐assembles into nanoparticles that are capable of encapsulating dye and anticancer drug molecules. The reduction‐responsive nanoparticles display a fast payload release rate in response to the intracellular reducing environment, which translates into superior anticancer activity towards PC‐3 cells.