接枝环氧树脂/硅溶胶杂化水分散液的制备与表征

利用原位分散法制备了接枝环氧树脂 硅溶胶杂化水分散液 ,并通过红外光谱和 ζ电位测定 ,表征了接枝环氧树脂与硅溶胶之间的杂化作用 .实验结果表明 ,与接枝环氧树脂水分散液相比 ,杂化水分散液的粒径和粘度均减小 .按此探讨了形成杂化水分散液的历程 .初步测定了杂化水分散液成膜后的表面性能 ,发现它们具有更高的硬度和更好的疏水性能 ,与成膜过程中硅溶胶在膜表面的富集效应有关     

单分散SiO2/PS复合粒子的制备

聚合物包覆无机物的核一壳结构复合粒子研究长期以来受到关注,源于其应用广泛．根据表面性质要求对无机相或者有机相表面进行功能化,可使得到的复合粒子与不同的应用体系相匹配．这类聚合物包覆无机物的有机／无机复合粒子,已在光学器件、分离、药品、农业、涂料等很多领域有广泛和潜在应用．本文制备这类复合粒子用于石油工业模型催化剂和助剂．     

液化膜对胶体悬浮液粘度的影响

Viscosity is one of the most important properties of colloids in mixing, transportation, stabilization, energy consumption, and so on. According to Einstein‘s viscosity equation, the viscosity of a colloidal dispersion increases with the increase of particle concentration. And the equation can be applicable to all micro-particle dispersions, because the effect of solvation films coated on particles can be neglectable in that case. But with the decrease of particle size to nano-scale, the formation of solvation films on nano-particles can greatly affect the viscosity of a dispersion, and Einstein‘s equation may not be applicable to this case. In this work, one kind of micro-size silica particle and two kinds of nano-size silica particles were used to investigate the effect of solvation films on dispersion viscosity, dispersed in water and ethyl alcohol solvents, respectively. The results of theoretical calculation and experimental investigation show that the increase of viscosity is contributed from solvation films by more than 95 percent for nano-particle dispersions, while less than 10 percent for micro-particle dispersions.     

Microfluidic synthesis of colloidal silica

We demonstrate the design, fabrication, and operation of microfluidic chemical reactors for the synthesis of colloidal silica particles. Two reactor configurations are examined: laminar flow reactors and segmented flow reactors. We analyze particle sizes and size distributions and examine their change with varying linear flow velocity and mean residence time. Laminar flow reactors are affected by axial dispersion at high linear velocities, thus leading to wide particle size distributions under these conditions. Gas is used to create a segmented flow, consisting liquid plugs separated by inert gas bubbles. The internal recirculation created in the liquid plugs generates mixing, which eliminates the axial dispersion effects associated with laminar flow reactors and produces a narrow size distribution of silica nanoparticles.     

Factors controlling the formation and stability of air bubbles stabilized by partially hydrophobic silica nanoparticles

Air bubbles have been formed using partially hydrophobic silica nanoparticles as the stabilizer. The particles were of primary particle size 20 nm, chemically treated to different degrees with dichlorodimethylsilane to render them partially hydrophobic. Above a certain bubble size range (typically 80-microm diameter), the bubbles seemed to be almost indefinitely stable, while for any size above 20 microm their stability against disproportionation is far better than bubbles stabilized by any protein film investigated in previous studies. A possible theoretical justification for this observation is presented. Bubbles could be formed by shaking water with the particles, but a much higher volume fraction of bubbles was obtained by pressurizing the aqueous phase to 5 atm overnight followed by suddenly releasing the pressure to nucleate bubbles within the silica dispersion. Sonicating the silica dispersion before nucleation also gave more bubbles, which were also found to be more stable. There appeared to be an optimum degree of surface hydrophobicity that gave maximum foamability and foam stability, where around 20-33% of the silanol groups on the silica surface had been converted to dimethylsilane groups. However, a sharp increase in stability occurred when between 1.8 and 2 mol dm(-3) NaCl was also included in the aqueous phase. The change in stability due to inclusion of salt can be rationalized in terms of changes occurring in the value of the particle contact angle. The effects of increasing sonication and an optimum surface chemical treatment can be explained by the need to make the particles sufficiently hydrophobic so that they adsorb strongly enough, while at the same time minimizing their tendency to aggregate in the bulk aqueous phase, which hinders their adsorption. Furthermore, confocal laser scanning microscopy of the bubble dispersions suggests that a large volume fraction of stable bubbles is only formed when the particles adsorbed to the bubbles are also part of a spanning silica particle network in the bulk aqueous solution, forming a weak gel with a finite yield stress.     

Rheological Properties of Silica Particle Suspensions in Mineral Oil

The rheological properties of particles suspended in a non‐polar mineral oil have been investigated as a function of volume fraction of particles, particle size, surface properties and shear rate. Three different types of particles were investigated; glass microspheres, monodisperse silica particles and fumed silica. The suspensions showed shear thinning behavior at higher volume fractions, and the viscosity increased with decreasing particle size. The hydrophobic particles display lass shear thinning effects. The relative viscosity of all the suspensions was well fitted to the Krieger and Dougherty model.     

Effect of Silica Particle Size on Texture,Structure, and Catalytic Performance of Cu/SiO<Subscript>2</Subscript> Catalysts for Glycerol Hydrogenolysis

The influences of carrier particle sizes of Cu/SiO₂ catalysts for hydrogenolysis of glycerol were studied use mono-dispersed silica as models. Catalysts were prepared by precipitation method with the average size of the mono-dispersed silica supports varying of 10, 20, and 90 nm. Characterization of the catalysts show that the physical properties such as pore volume and BET surface area of the catalysts were largely affected by the carrier particle size of silica. However, the copper dispersion of the three samples were similar. XPS patterns show a difference in the chemical states of copper species, small carrier particle size induced formation of copper phyllosilicate, which benefits on the stability of copper species in reaction. The overall activity in the reaction of glycerol hydrogenolysis shows a correlation with the carrier particle size. The small carrier particles prevent the copper species from aggregation thus such catalysts exhibit good catalytic activity and stability.     

Metal-support interaction in mesoporous silica supported cobalt Fischer-Tropsch catalysts

Summary The pore structure of silica supports (SiO₂ or MCM-41) has little influence on the metal-support interaction in silica supported cobalt catalysts. Cobalt dispersion, reduction behavior, and catalytic properties for the Fischer-Tropsch synthesis were primarily affected by the metal particle size.     

Influence of pyrogenic particles on the micromechanical behavior of thin sol-gel layers

Coatings based on sol-gel technology with different types of nanoparticles embedded into the sol-gel matrix were fabricated, and the resulting properties were investigated. Pyrogenic silica nanoparticles were added to the sol before coating. The silica particles varied in primary particle size and agglomerate size, and in their surface modification. The particles were wetted in ethanol and dispersed to certain finenesses. The difference in agglomerate size was partly caused by varying particle types, but also by the dispersing processes that were applied to the particles. The resulting coatings were examined by visual appearance and SEM microscopy. Furthermore, their micromechanical properties were determined by nanoindentation. The results show an important influence from the added nanoparticles and their properties on the visual appearance as well as the micromechanical behavior of the sol-gel coatings. It is shown that, in fact, the particle size distribution can have a major impact on the coating properties as well as the surface modification.     

Influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles

The experimental results on the influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles were reported. The spherical silica nanoparticles have been synthesized using polyethylene glycol (PEG) as the surfactant and oil shale ash (OSA) as a new silica source. In order to identify the optimal condition for producing the best quality silica nanoparticles with the good dispersion and uniformity, the effects of surfactant surface coverage and aging time were investigated. It was found that the particle size and distribution of silica nanoparticles depend on the concentration of PEG in dispersion. At relatively low concentration, 0–2 wt.%, the existing PEG is not sufficient to prevent further growth of the initially formed silica nanoparticles, leading to large aggregates of silica particles. When the PEG concentration increases to 3 wt.%, self-assembled PEG layer on the surface stabilizes the initially formed silica nanoparticles and the silica particles with average diameter of 10 nm are uniformly distributed. With further increasing the concentration of PEG, the number of PEG aggregates increases and silica nanoparticles are mainly formed inside the entangled PEG chains, resulting in an observation of clusters of silica nanoparticles. Moreover, it was found that as the aging time increased, the shape of silica nanoparticles becomes regular and the particle size distribution becomes narrow.     

Pd nanoparticles dispersed on solid supports: synthesis,characterization and catalytic activity on selective hydrogenation of olefins in aqueous media

Two types of Pd nanoparticle catalysts were prepared having 2–4 nm particle size using silica gel and porous polymer beads as solid supports. 2‐Pyridinecarboxaldehyde ligand was anchored on commercially available 3‐aminopropyl‐functionalized silica gel followed by Pd metal dispersion. Bead‐shaped cross‐linked poly(4‐vinylpyridine‐co‐styrene) gel was prepared by an emulsifier‐free emulsion polymerization of 4‐vinylpyridine, styrene and divinylbenzene in the presence of ammonium persulfate and subsequently dispersing the Pd metal on the synthesized polymer. These catalysts were characterized by SEM, TEM and ICP techiniques with respect to appearance, size and possible leaching out, respectively. Furthermore, the reactivity of these catalysts was tested on hydrogenation of various α,β‐unsaturated carbonyl compounds using aqueous solvent under a hydrogen balloon (1 atm). The results showed that the Pd dispersed on silica was a more efficient catalyst than Pd dispersed on polymer and the former could be recycled more than 10 times without considerable loss in activity. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of polymer monolithic stationary phases for capillary HPLC

Monolithic capillary columns have been prepared in fused‐silica capillaries by radical co‐polymerization of ethylene dimethacrylate and butyl methacrylate in the presence of porogen solvent mixtures containing various concentration ratios of 1‐propanol, 1,4‐butanediol, and water with azobisisobutyronitrile as the initiator of the polymerization reaction. The through pores in organic polymer monolithic columns can be characterized by “equivalent permeability particle size”, and the mesopores with stagnant mobile phase by “equivalent dispersion particle size”. Increasing the concentration of propanol in the polymerization mixture diminishes the pore volume and size in the monolithic media and improves the column efficiency, at a cost of decreasing permeability. Organic polymer monolithic capillary columns show similar retention behaviour to packed alkyl silica columns for compounds with different polarities characterized by interaction indices, I_x, but have different methylene selectivities. Higher concentrations of propanol in the polymerization mixture increase the lipophilic character of the monolithic stationary phases. Best efficiencies and separation selectivities were found for monolithic columns prepared using 62–64% propanol in the porogen solvent mixture. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra‐column contributions.     

原位制备PEI/SiO2复合材料及其改性环氧树脂的研究

在N,N-二甲基乙酰胺/四氢呋喃(DMAc/THF)混合溶剂中,在正硅酸乙酯(TEOS)存在条件下,通过溶胶-凝胶法原位制备了聚醚酰亚胺(PEI)/SiO2复合材料.在该复合材料中,当SiO2含量低于20 wt％时,透射电镜(TEM)和扫描电镜(SEM)的观察表明,SiO2纳米粒子可以均匀分散,粒径可在80～300 n...     

Colloidal particle size of fumed silica dispersed in solution and the particle size effect on silica gelation and some electrochemical behaviour in gelled electrolyte

Commercial-grade fumed silica was dispersed by mechanical shearing and/or ultrasonic force to produce dispersed silica particles with different sizes. The light-scattering technique and a diagrammatic method of extrapolation used to eliminate the influence of particle interaction were applied to determine the size of the particles. Then, the effect of particle size on the gelation of fumed silica in sulphuric acid medium, as well as some electrochemical properties, such as ion transfer and redox capacities of lead, in the gelled electrolyte were examined. The results showed that the size of dispersed particles affected the gelation of fumed silica itself: with increasing size, the thixotropy of the system increased and the gelling time decreased, particularly for those particles obtained only by simple stirring. The strength of the gel increased with increasing particle size. At an identical silica content, the increase in particle size led to a decrease in the density of the particles: this weakened the three-dimensional structure of the silica particle network and reduced the efficiency of ion transfer. However, the effect of silica particle size on the redox capacities of lead was negligible.     

Controlling morphology and particle size of hollow poly(styrene-divinylbenzene) microspheres fabricated by template-based method

Hollow poly(styrene–divinylbenzene) (P(S-DVB)) microspheres were fabricated via template-based method including synthesis of silica particles by sol-gel method, preparation of silica/P(S-DVB) particles by dispersion polymerization and chemical etching of silica cores by NaOH solution. TEM, FTIR and TG analyses confirmed that the hollow P(S-DVB) microspheres were successfully obtained. The morphology of hollow P(S-DVB) microspheres could be controlled by adjusting the amounts of DVB, AIBN and VTES, and the round-ball-like hollow P(S-DVB) microspheres were fabricated when the amount of DVB, AIBN and VTES was 30.0?wt%, 5.0?wt% and 30.0?vol% respectively. Both the size of silica particles and amount of monomers were regarded as the two key factors to control the particle size of the round-ball-like hollow P(S-DVB) microspheres.     

Correcting for a density distribution: particle size analysis of core-shell nanocomposite particles using disk centrifuge photosedimentometry

Many types of colloidal particles possess a core-shell morphology. In this Article, we show that, if the core and shell densities differ, this morphology leads to an inherent density distribution for particles of finite polydispersity. If the shell is denser than the core, this density distribution implies an artificial narrowing of the particle size distribution as determined by disk centrifuge photosedimentometry (DCP). In the specific case of polystyrene/silica nanocomposite particles, which consist of a polystyrene core coated with a monolayer shell of silica nanoparticles, we demonstrate that the particle density distribution can be determined by analytical ultracentrifugation and introduce a mathematical method to account for this density distribution by reanalyzing the raw DCP data. Using the mean silica packing density calculated from small-angle X-ray scattering, the real particle density can be calculated for each data point. The corrected DCP particle size distribution is both broader and more consistent with particle size distributions reported for the same polystyrene/silica nanocomposite sample using other sizing techniques, such as electron microscopy, laser light diffraction, and dynamic light scattering. Artifactual narrowing of the size distribution is also likely to occur for many other polymer/inorganic nanocomposite particles comprising a low-density core of variable dimensions coated with a high-density shell of constant thickness, or for core-shell latexes where the shell is continuous rather than particulate in nature.     

Hydrothermal growth of mesoporous SBA-15 silica in the presence of PVP-stabilized Pt nanoparticles: synthesis, characterization, and catalytic properties

A novel high surface area heterogeneous catalyst based on solution phase colloidal nanoparticle chemistry has been developed. Monodisperse platinum nanoparticles of 1.7-7.1 nm have been synthesized by alcohol reduction methods and incorporated into mesoporous SBA-15 silica during hydrothermal synthesis. Characterization of the Pt/SBA-15 catalysts suggests that Pt particles are located within the surfactant micelles during silica formation leading to their dispersion throughout the silica structure. After removal of the templating polymer from the nanoparticle surface, Pt particle sizes were determined from monolayer gas adsorption measurements. Infrared studies of CO adsorption revealed that CO exclusively adsorbs to atop sites and red-shifts as the particle size decreases suggesting surface roughness increases with decreasing particle size. Ethylene hydrogenation rates were invariant with particle size and consistent with a clean Pt surface. Ethane hydrogenolysis displayed significant structure sensitivity over the size range of 1-7 nm, while the apparent activation energy increased linearly up to a Pt particle size of approximately 4 nm and then remained constant. The observed rate dependence with particle size is attributed to a higher reactivity of coordinatively unsaturated surface atoms in small particles compared to low-index surface atoms prevalent in large particles. The most reactive of these unsaturated surface atoms are responsible for ethane decomposition to surface carbon. The ability to design catalytic structures with tunable properties by rational synthetic methods is a major advance in the field of catalyst synthesis and for the development of accurate structure-function relationships in heterogeneous reaction kinetics.     

Facile method for fabrication of nanocomposite films with an ordered porous surface

This paper presents a novel and facile method for the fabrication of nanocomposite films with ordered porous surface structures. In this approach, a water-borne poly(styrene-co-butyl acrylate-co-acrylic acid)/silica nanocomposite dispersion was synthesized in situ by surfactant-free emulsion polymerization by using 3-allyloxy-2-hydroxy-1-propanesulfonate as a polymerizable surfactant. When this dispersion was dried to form a film at a certain temperature, an ordered porous structure could be directly obtained on the surface of the nanocomposite film. SEM, TEM, and AFM were employed to observe the morphology, and XPS and particle analyzer were used to analyze the surface composition of the ordered porous nanocomposite film and the particle size, respectively.     

阳离子型聚氨酯-脲-胺在二氧化硅水溶胶听吸咐行为

研究了水溶性阳离子聚氨酯-脲-胺乙酸盐在球形、单分散的纳米二氧化硅水分 散注保的吸附行为。PUUA分子链在烯溶液中呈较舒展的构象，分子尺寸小于纳米氧 化硅的粒径。PUUA通过van der Waals作用力和氢键吸附在氧化硅表面。在稳喧吸 附后，等温吸附线呈线性上升，且没有极限值。吸附量随纳米氧化硅粒径的增大、 胶粒表面电荷的减少和电解质乙酸钢加入量的变化均以相同的斜率线性下降。 PUUA分子量增加，吸附量增加，且分子量大的PUUA优先吸附于氧化硅胶粒表面，静 电吸引是PUUA吸附至氧化硅溶胶粒表面的主要作用力。PUUA在氧化硅胶粒上的吸咐 使体系表现粘度下降，敏化作用使体系呈假塑性，而保护作用使体系呈胀流型。     

Encapsulation of Inorganic Particles by Dispersion Polymerization in Polar Media: 2. Effect of Silica Size and Concentration on the Morphology of Silica–Polystyrene Composite Particles

Following a previous work (Bourgeat-Lami, E., and Lang, J.,J. Colloid Interface Sci.197, 293 (1998)), encapsulation of silica beads has been achieved by dispersion polymerization of styrene in an aqueous ethanol medium using poly(N-vinyl pyrrolidone) as stabilizer. Silica beads, prepared according to the Stöber method, were coated prior to polymerization by grafting 3-(trimethoxysilyl)propyl methacrylate onto the surface. A great number of silica beads per composite particle were previously found using beads that had diameters between 49 and 120 nm. In the present work, larger silica beads with diameters between 191 and 629 nm are investigated. We demonstrate by transmission electron microscopy that, consequently, only a small number of silica beads are contained in the composite particles. By counting the composite particles containing precisely zero, one, two, three, four, and more than four silica beads, it clearly appears that the encapsulation of only one silica bead can be obtained simply by increasing the size of the beads. Under our experimental conditions, the optimal bead diameter for achieving composite particles containing only one silica bead turns out to be around 450 nm. We show that increasing the silica bead size above this value results in an increased number of composite particles without silica beads. In contrast, the number of composite particles with two, three, four, or more than four silica beads increases with decreasing silica bead size. In addition to the above variations in composition of the composite particles, changes in particle shapes were also observed as a function of the size of the silica beads and the styrene concentration in the polymerization medium. Hypotheses concerning these variations are presented.