Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

The synthesis and characteristic study of 6FDA-6FHP-NLO polyimide/SiO2 nanohybrid materials

Hybrid nanocomposite films of silica (SiO₂) in polyimide (PI) from 4,4^′-(hexafluoroisopropylidene) diphthalic arhydride (6FDA), 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane (6FHP) and nonlinear optical (NLO) molecule have been successfully fabricated by an in situ sol-gel process. The silica content in the hybrid films was varied from 0 to 22.5 wt%. These nanocomposite films exhibit fair good optical transparency. Fourier transform infrared (FTIR) spectroscopy results confirm the formation of SiO₂ particles in PI matrix. Scanning electron microscope (SEM) images show that the SiO₂ phase is well dispersed in the polymer matrix. Their glass transition behavior and thermal stability were investigated by differential scanning calorimeter (DSC) and thermal gravimetric analysis (TG).     

Preparation and characterization of film-forming raspberry-like polymer/silica nanocomposites via soap-free emulsion polymerization and the sol–gel process

Herein, we report on the synthesis of film-forming poly(styrene-co-butyl acrylate-co-acrylic acid)/SiO₂ [P(St-BA-AA)/SiO₂] nanocomposites by in situ formation of SiO₂ nanoparticles from TEOS via sol–gel process in the presence of poly(acrylic acid) (PAA)-functionalized poly(styrene-co-butyl acrylate) [P(St-BA)] particles fabricated by soap-free emulsion polymerization. The formed silica particles could be absorbed by polyacrylate chains on the surface of PAA-functionalized P(St-BA) particles; thus, raspberry-like polymer/silica nanocomposites would be obtained. Transmission electron microscopy, Fourier transform infrared spectroscopy, attenuated total reflectance infrared spectrum, ultraviolet–visible transmittance spectra, and thermogravimetric analysis were used to characterize the resulting composites. The results showed that the hybrid polymer/silica had a raspberry-like structure with silica nanoparticles anchored on the surface of polymer microspheres. The thermal, fire retardant, and mechanical properties and water resistance of the film were improved by incorporating silica nanoparticles, while the optical transmittance was seldom affected due to nanosized silica particles uniformly dispersed in the film.

Conducting properties of nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and SiO<Subscript>2</Subscript> nanoparticles at the interface with a lithium electrode

Nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and 1 M LiBF₄ solution in γ-butyrolactone with addition of SiO₂ nanoparticles were synthesized and studied. Resistance measurement at the Li/electrolyte and Li/nanocomposite electrolyte interface by the time-resolved electrochemical impedance showed its significant decrease in the presence of SiO₂ nanoparticles. Charge-discharge cycling of prototypes of Li/LiFePO₄ batteries for 50 cycles also showed the advantage of using nanocomposite polymer electrolytes over electrolytes without SiO₂ additives.     

The release of TiO2 and SiO2 nanoparticles from nanocomposites

There is a growing interest in the development of nanocomposites consisting of organic polymers and TiO₂ or amorphous SiO₂ nanoparticles. These nanoparticles may be released from nanocomposites. There is evidence that amorphous SiO₂ and TiO₂ nanoparticles can be hazardous. Thus, in the design of nanocomposites with such nanoparticles, hazard reduction extending to the full nanocomposite life cycle would seem a matter to consider. Options for hazard reduction include: changes of nanoparticle surface, structure or composition, better fixation of nanoparticles in nanocomposites, including persistent suppression of oxidative damage to polymers by nanoparticles, and design changes leading to the release of relatively large particles.     

Moisture and solvent responsive cellulose/SiO<Subscript>2</Subscript> nanocomposite materials

Water responsive SiO₂/cellulose nanocomposite hydrogels and films were constructed, for the first time, by dispersing SiO₂ nanoparticles into cellulose solution in LiOH/urea solvent, and then by crosslinking with epichlorohydrin or regeneration in coagulation bath, respectively. The cellulose nanocomposite materials were characterized by Field emission scanning electron microscopy, FTIR, dynamic rheology, wide angle X-ray diffraction and mechanical test. The SiO₂/cellulose nanocomposites at wet state or in water displayed unique behaviors, showing higher light transmittance than those before contacting with water. The results revealed that strong hydrogen-bonding interaction among water, cellulose and SiO₂ led the good dispersion of SiO₂ nanoparticles in the cellulose matrix. The incorporation of SiO₂ nanoparticles improved the transmittance and mechanical strength of the cellulose hydrogels, and also enhanced the mechanical strength of the films. Especially, the cellulose/SiO₂ nanocomposite films were milky at dry state, and changed to transparent after being soaked in water, different from the cellulose film without the SiO₂ nanoparticles. In our findings, SiO₂ and cellulose with water could form strong hydrogen bonding to create a homogenous network structure. The cellulose/SiO₂ composite as a smart material exhibited moisture and solvent responsiveness, showing potential applications in moisture detection.     

SiO2@CdTe@Au复合纳米粒子的制备与非线性吸收特性

应用SiO₂纳米粒子、CdTe量子点和Au纳米粒子,采用逐层吸附法制备SiO₂@CdTe@Au纳米复合材料。同时对样品进行了测试和表征,从多个方面证明纳米复合材料成功制备。利用Z扫描技术测量了SiO₂@CdTe和SiO₂@CdTe@Au纳米复合材料在纳秒激光脉冲作用下的非线性吸收光学特性。实验结果表明：SiO₂@CdTe和SiO₂@CdTe@Au纳米复合材料均表现出饱和吸收特性。SiO₂@CdTe@Au较SiO₂@CdTe纳米复合材料具有更强的非线性光学特性,并对其机理进行了分析。     

Influence of SiO2 nanoparticles on electro-optical and thermophysical properties of polyacrylate/liquid crystal composites

ABSTRACT

In this paper, SiO₂ nanoparticle-doped polymer dispersed liquid crystal (PDLC) lenses are made from a mixture of prepolymer, 5CB liquid crystal and SiO₂ nanoparticles by the polymerisation induced phase separation (PIPS) process. The effect of SiO₂ nanoparticles on the electro-optical properties of PDLC ?lms are studied. It is established that SiO₂ nanoparticles affect the microstructure of PDLC ?lms signi?cantly because of the formed agglomerates of SiO₂ nanoparticles. Results show an improvement in the electro-optical properties and a decrease in the response time for doped systems with small amount of SiO₂ nanoparticles. We also observe a shift of nematic–isotropic transition temperature as a function of SiO₂ nanoparticle contents. A good agreement between the electro-optical study and thermophysical properties is reached.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Effect of TiO2 nanoparticles on structure and properties of high density polyethylene membranes prepared by thermally induced phase separation method

Polyethylene/TiO₂ membranes were fabricated via thermally induced phase separation (TIPS) method. A set of characterization tests including FE‐SEM, EDX, XRD, DSC, TGA, DMA, mechanical test and relative pure water flux for characterization of membranes were carried out to investigate the effect of TiO₂ nanoparticles on membrane properties. The results of EDX, XRD and TGA analyses confirmed the presence of TiO₂ nanoparticles in the polymer matrix. The results of DSC analysis revealed that the melting point as well as the crystallinity of the membranes increased slightly with increasing TiO₂ content. However, the glass transition temperature of the membranes was not affected by the presence of particles. Addition of nanoparticles also increased storage modulus, loss modulus and tensile strength at break of the membranes due to the stiffness improvement effect of inorganic TiO₂. Finally, it was observed that incorporation of the nanoparticles improved pure water flux of the membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Pickering emulsion polymerization kinetics of styrene: Comparison of bare and surface modified SiO2 nanoparticles

A step towards the understanding of some mechanistic events occurring in the styrene Pickering emulsions, using a SiO₂ dispersion, is presented. Polymerizations at 80°C with different levels of a water soluble initiator were performed. The emulsion polymer content was ca. 15% with conversions close to 90%. With conversion and particle size measurements, the particle density was estimated for bare and surface modified SiO₂ particles. Then, the average number of radicals per particle was inferred, yielding a pseudo-bulk type polymerization. It was found that bare SiO₂ nanoparticles do not participate in the nucleation mechanism; however, they, along with the initiator, promote an enhanced oligomer coagulation. On the other hand, the hexadecyltrimethylammonium bromide modified SiO₂ nanoparticles do participate in the nucleation and coagulation mechanisms, yielding more stable and smaller poorly-covered polymer particles. This approach allowed untangling some events such as: particle nucleation, radical entry to particles, particle density, coagulation and vitreous and Trommsdorff effects.     

Syntheses of MO2 (M=Si, Ce, Sn) nanoparticles by solid-state reactions at ambient temperature

Nano oxides (SiO₂, CeO₂, SnO₂) were successfully synthesized by solid-state reactions at ambient temperature. The nanoparticles were characterized by X-ray powder diffraction, TEM, BET, and TGA-DTA. The SiO₂ particles were also investigated using IR spectra. Effects of calcination on the nanoparticles were studied in this paper. The solid-state reaction technique is a convenient, inexpensive and an effective preparation method of monodisperse oxide nanoparticles in high yield. The mechanisms of the formation of nano materials by solid-state reactions at ambient temperature were primarily investigated.     

Polyurethane-TiO2 nanocomposite coatings from sunflower- oil-based amide diol as soft segment

Abstract

Vegetable oil based environmentally friendly polyurethane-TiO₂ nanocomposite coatings have been synthesized by using sunflower oil derived diol, toluene diisocyanate and TiO₂ nanoparticles. The chemical structure was confirmed by FTIR and NMR techniques while physico-chemical testing was carried out by standard laboratory methods. Physico-mechanical and anticorrosive tests of the coatings (in different corrosive media) have been investigated by standard methods. In addition to this the morphology and thermal stability behavior of the coatings have been carefully investigated by different techniques like XRD, TEM, TGA/DTG and DSC. The comparison of the performance of nanocomposites with the respective virgin polyurethane coatings reveals that the dispersion of nanoTiO₂ enhanced the mechanical, corrosion and thermal stability behavior of the polymer. The synthesized nanocomposites can be used safely upto 250–275?°C. These sunflower oil derived polyurethane nanocomposites can be used in the world of protective coatings, as an alternative of petroleum derived corrosion protective coating materials.     

In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles

Surface modified TiO₂ nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The surface modification of the TiO₂ nanoparticles (average diameter of 4.5 nm) was achieved by the formation of a charge transfer complex between TiO₂ nanoparticles and 6-palmitate ascorbic acid. The surface modified TiO₂/nanoparticles were characterized using UV−Vis and FTIR spectroscopy, while the obtained polymer nanocomposites were characterized using reflection and ¹H NMR spectroscopy, as well as gel permeation chromatography. The influence of the TiO₂ nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. The glass transition temperature of the polymer was not influenced by the presence of the nanoparticles while the thermal stability was significantly improved.     

Nanocomposites of poly(l-lactide) and surface-grafted TiO2 nanoparticles: Synthesis and characterization

A new method of surface modification of TiO₂ nanoparticles by surface-grafting l-lactic acid oligomer was developed. The surface-grafting reaction was evaluated by Fourier transformation infrared (FTIR) and thermal gravimetric analysis (TGA). The results showed that l-lactic acid oligomer could be easily grafted onto the TiO₂ nanoparticles surface in the presence of stannous octanoate and the highest amount of grafted polymer was about 8.5% in weight. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) results showed that grafted TiO₂ (g-TiO₂) in chloroform or PLLA matrix approximated to uniform, while unmodified TiO₂ nanoparticles tended to aggregate. The tensile strength of this material was greatly improved by the addition of g-TiO₂ nanoparticles in poly(l-lactide) (PLLA) matrix. The tensile strength of the g-TiO₂/PLLA nanocomposite containing 5 wt.% of g-TiO₂ was 72 MPa, which was 23.1% higher than that of pure PLLA. Even though the incorporation of the TiO₂ nanoparticles into PLLA led to the deterioration of its elongation at break, the g-TiO₂/PLLA nanocomposite also exhibited better ductility than that of TiO₂/PLLA nanocomposite.     

Analysis of Variance (ANOVA) for Optimizing the Nano-SiO2 Content of High Performance Epoxy Nanocomposites

Epoxy based nanocomposite samples containing SiO₂ nanoparticles (0.0–3.0 %w) were prepared for physical and mechanical evaluation. Some thermomechanical and physical properties of samples were investigated using dynamic mechanical analysis (DMA), tensile strength, hardness and abrasion tests. The main aim of experimentation was to realize the optimum amount of nano-SiO₂ which would demonstrate the best improving effect on mechanical and physical properties of nanocomposite samples and finding how significant a factor is for improving in physical and mechanical properties. Analysis of variance (ANOVA) was applied for optimization of SiO₂ content in epoxy based nanocomposites.     

Structures and properties of nanocomposites based on a cured cycloaliphatic epoxy resin

The effect of nanoparticles on glass-transition temperature T _g and the elastic modulus of a cycloaliphatic epoxy resin cured with methylhexahydrophthalic anhydride is theoretically analyzed. The analysis was performed with allowance for the following factors: the chemical structure of the polymer, the chemical structures of the nanoparticles and their surfaces if they are modified, the concentrations and shapes of nanoparticles (spherical, plate, cylindrical), the concentration of functional groups on the surfaces of nanoparticles, the energy of intermolecular interaction between a polymer and a nanoparticle, and the possibility of chemical interaction between a polymer and the surfaces of nanoparticles. The most pronounced effect on T _g is exerted by cylindical nanotubes, whose surfaces are modified with OH groups, which give rise to hydrogen bonding. The least effect is exerted by spherical nanoparticles. After the introduction of SiO₂ nanoparticles, the elastic moduli of nanocomposites increase by a factor of 1.15 at an amount of nanoparticles up to 20%.     

Enhanced ionic conductivity in novel nanocomposite gel polymer electrolyte based on intercalation of PMMA into layered LiV3O8

In the present work, a novel polymer electrolyte based on poly(methyl methacrylate) (PMMA)/layered lithium trivanadate (LiV₃O₈) nanocomposite has been investigated. X-ray diffraction (XRD) study shows that d-spacing is increased from 6.3?±?0.1 Å to 12.8?±?0.1 Å upon intercalation of the polymer into the layered LiV₃O₈. Room temperature ionic conductivity of the obtained nanocomposite gel polymer electrolyte is found to be superior to that of conventional PMMA-based gel polymer electrolyte. Enhancement in ionic conductivity of the nanocomposite gel electrolyte is attributed to the formation of a two-dimensional channel as a result of decreased interaction between Li⁺ and V₃O ₈ ^? layers as confirmed by FTIR. SEM results show aggregation of nanocomposite particles resulting from extension of some of the polymer chains from interlayer to the edge providing paths for Li⁺ ion transport. Interfacial stability of nanocomposite gel electrolyte is also found to be better than that of the conventional PMMA-based gel polymer electrolyte.     

Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability

Poly(l-lactic acid)-TiO₂ nanoparticle nanocomposite films were prepared by incorporating surface modified TiO₂ nanoparticles into polymer matrices. In the process of preparing the nanocomposite films, severe aggregation of TiO₂ nanoparticles could be reduced by surface modification by using carboxylic acid and long-chain alkyl amine. As a result, the nanocomposite films with high transparency, similar to pure PLA films, were obtained without depending on the amount of added TiO₂ nanoparticles. A TEM micrograph of the nanocomposite films suggests that the TiO₂ nanoparticles of 3-6 nm in diameter were uniformly dispersed in polymer matrices. Photodegradation of PLA-TiO₂ nanoparticle nanocomposite films was also investigated. The results showed that nanocomposite films could be efficiently photodegraded by UV irradiation in comparison with pure PLA.     

Ultrasonically assisted in situ emulsion polymerization: a facile approach to prepare conducting copolymer/silica nanocomposites

Ultrasonically assisted in situ emulsion polymerization was used to prepare electrically conducting copolymer poly(aniline‐co‐p‐phenylenediamine) [poly(Ani‐co‐pPD)] and silica (SiO₂) nancomposites. This approach can solve problems in the dispersion and stabilization of SiO₂ nanoparticles in the copolymer matrix. It was found that the aggregation of SiO₂ nanoparticles could be reduced under ultrasonic irradiation. Scanning transmission electron microscopy (STEM) confirmed that the resulting poly(Ani‐co‐pPD)/SiO₂ nanocomposite particles were spherical in shape, in which SiO₂ nanoparticles were well dispersed. The comonomer molecules were absorbed on the surface of SiO₂ particles and then polymerized to form core–shell nanocomposite. The incorporation of SiO₂ in the nanocomposite was supported by Fourier transform infrared spectroscopy (FT‐IR). UV‐visible spectra of the diluted colloid dispersion of nanocomposite particles were similar to those of the neat copolymer. Conductivity of nanocomposites was higher than the value obtained for the neat copolymer. Copyright © 2009 John Wiley & Sons, Ltd.