NHC-Palladium-Catalyzed Cascade Annulation of Alkynoic Acids with Unactivated Alkenes in Ionic Liquids

An N-heterocyclic carbene palladium (NHC-palladium)-catalyzed cascade annulation of alkynoic acids with unactivated alkenes under an oxygen atmosphere in ionic liquids is described. This protocol enables facile access for the preparation of diverse alkyl substituted α-methylene-γ-lactones in moderate to good yields with excellent Z/E selectivity. Moreover, the ionic liquid not only acts as the green solvent, but also as the eco-friendly chlorine source, thus avoiding the use of excess metal halides such as cupric chloride. Some preliminary mechanistic studies were performed, which further revealed possible pathways for this cascade annulation.     

Natural terpene derivatives as new structural task‐specific ionic liquids to enhance the enantiorecognition of acidic enantiomers on teicoplanin‐based stationary phase by high‐performance liquid chromatography

We present the specific cooperative effect of a semisynthetic glycopeptide antibiotic teicoplanin and chiral ionic liquids containing the (1R ,2S ,5R )‐(–)‐menthol moiety on the chiral recognition of enantiomers of mandelic acid, vanilmandelic acid, and phenyllactic acid. Experiments were performed chromatographically on an Astec Chirobiotic T chiral stationary phase applying the mobile phase with the addition of the chiral ionic liquids. The stereoselective binding of enantiomers to teicoplanin in presence of new chiral ionic liquids were evaluated applying thermodynamic measurements and the docking simulations. Both the experimental and theoretical methods revealed that the chiral recognition of enantiomers in the presence of new chiral ionic liquids was enthalpy driven. The changes of the teicoplanin conformation occurring upon binding of the chiral ionic liquids are responsible for the differences in the standard changes in Gibbs energy (ΔG ⁰) values obtained for complexes formed by the R and S enantiomers and teicoplanin. Docking simulations revealed the steric adjustment between the chiral ionic liquids cyclohexane ring (chair conformation) and the β‐d ‐glucosamine ring of teicoplanin and additionally hydrophobic interactions between the decanoic aliphatic chain of teicoplanin and the alkyl group of the tested salts. The obtained terpene derivatives can be considered as “structural task‐specific ionic liquids” responsible for enhancing the chiral resolution in synergistic systems with two chiral selectors.     

Polyaddition of bifunctional cyclic carbonate with diamine in ionic liquids: In situ ion composite formation and simple separation of ionic liquid

Polyaddition of bifunctional cyclic carbonates and diamines in ionic liquids proceeded smoothly to afford polyurethanes having hydroxyl groups in the side chain (i.e., poly(hydroxyurethane)). The reaction mixtures separated into ionic liquids and ionic composites consisting of poly(hydroxyurethane) and ionic liquids. The ionic composites originated from the interactions between hydroxyl groups in the side chains and the ionic liquids, confirmed by IR spectroscopic analysis. When the polyaddition was conducted in the mixed solvent consists of water and N‐n‐butylimidazolium hexafluorophosphate. After the reaction, the polymer and the ionic liquid could be separated easily. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4629–4635, 2009     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

以Schiff碱为阳离子的新型离子液体的制备与表征

Two novel ionic liquids, N,N＇-disalicylideneethylenediaminium acetate and N,N＇-disalicylideneethylenediaminium trifluoroacetate, were prepared and characterized by IR, ^1H NMR, DTA-TG and elemental analysis. The experimental results indicate that the new ionic liquids possess lower melting point and higher electrical conductivity. It is noteworthy that the ionic liquids reported herein are the first member of the ionic liquid family with the Schiff base functional group in the cation.     

离子液体溶剂中5-氧代-5,6,7,8-四氢苯并吡喃衍生物的一种温和有效的合成

A one-pot synthesis of a series of 5-oxo-5,6,7,8-tetrahydro-4H-benzo-[b]-pyran derivatives via three-component coupling reactions of aldehydes, dimedone and malononitrilein room temperature ionic liquids （RTILs） without any catalyst has been reported. In the meantime, the reuse of ionic liquids and the effect of different ionic liquids as solvent on the reaction have also been investigated.     

Ionic Liquids in Polyethylene Glycol Aqueous Solutions: Salting-in and Salting-out Effects

Changes of the fluid phase behaviour of polyethylene glycol (PEG) aqueous solutions – viz. critical solution temperature shifts at atmospheric pressure – were produced by the addition of different ionic liquids, namely 1-ethyl-3-methylimidazolium ethyl sulfate and 1-alkyl-3-methylimidazolium chloride (alkyl = ethyl to decyl). The addition of ionic liquids with long alkyl chains improves the solubility of PEG in water (salting-in effect), whereas the impact of short-chain ionic liquids is usually the contrary (salting-out effect). The results are interpreted taking into account the kosmotropic (water-structuring) or chaotropic (water-structure-breaking) nature of ionic liquids, as compared to other inorganic salts.     

Ionic Liquids in Polyethylene Glycol Aqueous Solutions: Salting-in and Salting-out Effects

Summary. Changes of the fluid phase behaviour of polyethylene glycol (PEG) aqueous solutions – viz. critical solution temperature shifts at atmospheric pressure – were produced by the addition of different ionic liquids, namely 1-ethyl-3-methylimidazolium ethyl sulfate and 1-alkyl-3-methylimidazolium chloride (alkyl = ethyl to decyl). The addition of ionic liquids with long alkyl chains improves the solubility of PEG in water (salting-in effect), whereas the impact of short-chain ionic liquids is usually the contrary (salting-out effect). The results are interpreted taking into account the kosmotropic (water-structuring) or chaotropic (water-structure-breaking) nature of ionic liquids, as compared to other inorganic salts.     

Spectroscopic evaluation of chiral and achiral fluorescent ionic liquids

In this study, spectroscopic investigation of chiral and achiral room temperature ionic liquids is achieved. New ionic liquids were prepared via metathesis, accomplished by the reaction of either L-phenylalanine ethyl ester hydrochloride, chlorpromazine hydrochloride or 1,10-Phenanthroline monohydrate hydrochloride with lithium bis(trifluoromethane) sulfonamide in water. The resulting ionic liquids were produced in high yield and purity. The results obtained by use of ¹H NMR and IR experiments were in very good agreement with the chemical structures of the synthesized ionic liquids. In addition, the results of thermal gravimetric analysis suggested that these ionic liquids have good thermal stability. UV-Vis and fluorescence spectroscopy measurements indicated that these ionic liquids are strongly optically absorbent and fluorescent. Lastly, time-based fluorescence steady-state measurements demonstrated the high photostability of these ionic liquids.      

Electrodeposition of Metals and Semiconductors in Air‐ and Water‐Stable Ionic Liquids

In addition to their stability, the advantages of air‐ and water‐stable ionic liquids over chloroaluminate ionic liquids, which were intensively investigated in the past, are that they are easy to dry, purify, and handle. Moreover, some of these ionic liquids have an extremely large electrochemical window of more than 5 V, and hence they give access to the electrodeposition of many metals and semiconductors, such as Ta, Ti, Si, and Ge. The results to date for the electrodeposition of metals and semiconductors in the most popular air‐ and water‐stable ionic liquids are presented.     

Ionic liquids in the synthesis and modification of polymers

Ionic liquids are organic salts that are liquid at ambient temperatures, preferably at room temperature. They are nonvolatile, thermally and chemically stable, highly polar liquids that dissolve many organic, inorganic, and metallo‐organic compounds. Many combinations of organic cations with different counterions are already known, and the properties of ionic liquids may be adjusted by the proper selection of the cation and counterion. In the last decade, there has been increasing interest in using ionic liquids as solvents for chemical reactions. The interest is stimulated not only by their nonvolatility (green solvents) but also by their special properties, which often affect the course of a reaction. In recent years, ionic liquids have also attracted the attention of polymer chemists. Although the research on using ionic liquids in polymer systems is still in its infancy, several interesting possibilities have already emerged. Ionic liquids are used as solvents for polymerization processes, and in several systems they indeed show some advantages. In radical polymerization, the k_p/k_t ratio (where k_p is the rate constant of propagation and k_t is the rate constant of termination) is higher than in organic media, and thus better control of the process can be achieved. Ionic liquids, as electrolytes, have also attracted the attention of researchers in the fields of electrochemical polymerization and the synthesis of conducting polymers. Finally, the blending of ionic liquids with polymers may lead to the development of new materials (ionic liquids may act as plasticizers, electrolytes dispersed in polymer matrices, or even porogens). In this article, the new developments in these fields are briefly discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4675–4683, 2005     

Chlorozincate(II) acidic ionic liquid: Efficient and biodegradable silylation catalyst

A practical and highly efficient silylation of alcohol and phenol derivatives with hexamethyldisilazane (HMDS) using acidic ionic liquids under mild reaction conditions is described. A series of Brønsted as well as Brønsted–Lewis acidic ionic liquids were prepared and their performance investigated for the silylation of a wide variety of alcohols and phenols with HMDS. Imidazole‐ as well as N ‐methyl‐2‐pyrrolidone‐based acidic ionic liquids have a higher catalytic activity for the protection of sensitive, hindered alcohols and phenols, thus providing an environmentally begin and versatile alternative to current acid catalysts. In addition, the acidic ionic liquids are reusable, being recovered easily and reused several times without significant deterioration in catalytic activity.     

Lewis Superacidic Ionic Liquids with Tricoordinate Borenium Cations

The first examples of ionic liquids based on borenium cations, [BCl₂L]⁺, are reported. These compounds form highly Lewis acidic liquids under solvent‐free conditions. Their acidity was quantified by determining the Gutmann acceptor number (AN). Extremely high ANs were recorded (up to AN=182, δ_31P=120 ppm), demonstrating that these borenium ionic liquids are the strongest Lewis superacids reported to date, with the acidity enhanced by the ionic liquid environment.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

以N为中心的阴离子离子液体的合成、表征及应用

首次通过不同阴离子的钾盐和不同的季铵化的咪唑,吡咯溴盐/氯盐进行离子交换,合成了一系列含氰基官能团的阴离子功能化离子液体。通过红外、核磁共振、质谱对离子液体的结构进行表征;通过TGA对离子液体的热稳定性进行测定,结果发现功能化离子液体具有良好的热稳定性,其分解温度在224-289℃范围内。将功能化离子液体[EMIm][N(CN)COC2H5]作为配体应用于无膦配体的Suzuki偶联反应,发现在反应中加入功能化离子液体[EMIm][N(CN)COC2H5]可以使反应收率提高10-20%。     

Synthesis of derivatives of prenylacetic acids by reactions of alkyl malonate, cyanoacetate, and acetoacetate with alkylating reagents in ionic liquids

A method for the synthesis of carboxylic acid derivatives containing one or two —CH₂CH _n (Me)CH _n+1CH₂— fragments (n = 0, 1) was developed. The method is based on the alkylation of (di)alkyl malonates, cyanoacetates, and acetoacetates with acyclic prenyl halides in ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate. For the ambident ethyl acetoacetate anion, the reactions with prenyl halides devoid of a double bond in the allylic position relative to the halogen atom carried out in the ionic liquids give mixtures of C- and O-alkylation products, while in the case of allylic prenyl halides, only C-alkylation products are formed. The reactions of ethyl 2-geranylmalonate and 2-geranylacetoacetate with bromocyclohexane and 1-chloro-3-dimethylaminopropane in ionic liquids provided derivatives of pharmacologically active geranylacetic acids. The product yields are higher than those in molecular organic solvents. The ionic liquids were recovered and reused in the alkylation.     

Dissolution and forming of cellulose with ionic liquids

The dissolution of cellulose in different ionic liquids will be described as a very recent subject for a direct dissolving process, which was used to prepare regenerated cellulose fibres. The preparation of the dopes was arranged starting from slurry of cellulose in the aqueous ionic liquid by removing the water at elevated temperature, vacuum and high shearing rates. As ionic liquids, the 1-N-Butyl-3-methylimidazolium chloride, the 1-Ethyl-3-methylimidazolium chloride, the 1-N-Butyl-2,3-dimethylimidazolium chloride, the 1-N-Butyl-3-methylimidazolium acetate and the 1-Ethyl-3-methylimidazolium acetate were investigated. The cellulose solutions in ionic liquids were characterised by means of light microscopy, cone-plate rheometry and particle analysis. In addition these results were compared with cellulose solutions in N-methyl-morpholine-N-oxide monohydrate. Finally the cellulose dopes were shaped by a dry-wet spinning process to manufacture cellulose fibres. The properties of the resulted fibre had been determined and will be discussed.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Stability of Ag<Superscript>+</Superscript> Complexes with Cryptand 222 in Ionic Liquids

Stability constants of silver(I) complexes with cryptand 222 were measured in a number of ionic liquids, applying potentiometric titration. The ionic liquids were based on 1-butyl-3-methylimidazolium, 1-ethyl-3-methylimidazolium, 1-butyl-1-methyl-pyrrolidinium and 1-methyl-1-propyl-pyrrolidinium cations, as well as on tetrafluoroborate, triflate and bis(trifluoromethane sulfonyl) imide. The stability constants, expressed in log K scale, were within the broad range of 8.4–17.2. The formation of the Ag⁺222 cryptates was not detected in ionic liquids based on halide anions. Free enthalpy of silver(I) transfer from dimethylsulfoxide as a reference molecular solvent to ionic liquids was calculated applying the cryptate assumption. The results were discussed in terms of the competition between silver(I) complexation by ion forming ionic liquid and its complexation by cryptand 222.in final form: 6 December 2004This revised version was published online in July 2005 with a corrected issue number.     

Perspectives of ionic liquids applications for the synthesis of five- and six-membered O,N-heterocycles

A considerable attention has been paid on the use of ionic liquids in chemical research. Modern synthetic chemistry is benefited as ionic liquid methodology provided an environmentally benign approach. In comparison to traditional processes the use of ILs resulted in improved, complimentary or alternative selectivities in organic synthesis. This review focuses on the advances in the development of innovative applications of ionic liquids for the synthesis of five- and six-membered O,N-heterocycles.