Synthesis of a hyperbranched polythioketal with 100% degree of branching

A 100% hyperbranched polymer was successfully prepared by using 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one as an AB₂ monomer in trifluoroacetic acid. The kinetics of the model reaction between 9‐fluorenone and 3‐mercaptopropionic acid was investigated. The reaction obeyed the second‐order kinetics, indicating that the first reaction, that is, the formation of the intermediate from 9‐fluorenone and 3‐mercaptopropionic acid, is considerably slower than the second one, that is, the reaction of the intermediate with 3‐mercaptopropionic acid. On the basis of this finding, a new monomer expected to produce a 100% branched hyperbranched polymer, 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one, was designed and prepared. The obtained polymer was characterized by ¹H and ¹³C‐NMR spectroscopy, which confirmed that the polymer was a 100% branched hyperbranched polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2689–2700, 2008     

Hyperbranched polymers with a degree of branching of 100%

4‐Methoxy‐4′‐(3″‐N‐maleimidopropoxy)benzaldazine has been prepared and used for the synthesis of hyperbranched polymers by ,criss‐cross'‐cycloaddition. In this type of reaction two unsaturated groups, such as the maleic imide groups, are added to the azine function. Hence, the azine behaves as a difunctional system, and therefore 4‐Methoxy‐4′‐(3″‐N‐maleimidopropoxy)benz‐aldazine is an AB₂ monomer, with the maleic imide group being the A‐function, and the azine group representing the B₂ part. The nature of this cycloaddition reaction ensures the coupled reaction of the two B‐functions of each monomer unit. Consequently, the resulting polymer consists exclusively of branched and terminal repeating units and therefore has a degree of branching of 100%.     

Synthesis and characterization of a novel AB2 monomer and corresponding hyperbranched poly(arylene ether phosphine oxide)s

A novel AB₂ monomer, 4‐(fluorophenyl)‐4′,4″‐(bishydroxyphenyl) phosphine oxide, was synthesized. The monomer was successfully polymerized to a modest molecular weight with various catalysts, including K₂CO₃ and Cs₂CO₃/Mg(OH)₂. Hyperbranched polymers exhibited exceptionally high thermal stability and solubility in conventional polar organic solvents and basic water solutions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3736–3741, 2000     

Synthesis and characterization of poly(arylene ether imidazole)s

Poly(arylene ether imidazole)s were prepared by the aromatic nucleophilic displacement reaction of a bisphenol imidazole with activated aromatic dihalides. The polymers had glass transition temperatures ranging from 230 to 318°C and number-average molecular weights as high as 82,000 g/mol. Thermogravimetric analysis showed a 5% weight loss occurring ～ 400°C in air and ～ 500°C in nitrogen. Typical neat resin mechanical properties obtained at room temperature included tensile strength and tensile modulus of 14.2 and 407 ksi and fracture energy (G_lc) of 23 in. lb/in.² Titanium-to-titanium tensile shear strengths measured at 23 and 200°C were 4800 and 3000 psi, respectively. In addition, preliminary data were obtained on carbon fiber laminates. The chemistry, physical, and mechanical properties of these polymers are discussed.     

Synthesis and characterization of deuterated poly(arylene ether sulfones)

Selectively deuterated poly(arylene ether sulfones) were prepared for neutron scattering studies and for deuterium NMR investigations. The availability of these model macromolecules permits molecular-level identification of the motions responsible for the low temperature relaxations that have been observed in the dynamic mechanical spectra of these engineering polymers. Three labeled sites on the appropriate monomers (bisphenol-A and 4,4′-dichlorodiphenylsulfone) were prepared from deuterated intermediates and characterized via chromatographic, spectroscopic, and thermal analysis. The deuterium exhcange between methyl and aromatic sites that occurred during synthesis was quantified. These labeled monomers were mixed with hydrogenous monomers to synthesize high molecular weight, selectively deuterated poly(arylene ether sulfones). A synthetic technique involving N-methyl-2-pyrrolidone/potassium carbonate was employed to afford high molecular weight polymers. The polymers were characterized by FT-IR, proton, carbon, and deuterium NMR, intrinsic viscosities, and thermal analysis. Molecular weights of the labeled polymers were similar to unlabeled systems.     

Synthesis and characterization of soluble,fluorescent poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s containing 1,3,5‐triphenylbenzene segments

The bisphenol 4,4″‐dihydroxy‐5′‐phenyl‐m‐terphenyl ( 4 ), containing a 1,3,5‐triphenylbenzene moiety, was synthesized from a pyrylium salt obtained by the reaction of benzaldehyde with p‐methoxyacetophenone with boron trifluoride etherate as a condensing agent. Polymers were obtained from 4 by a nucleophilic displacement reaction with various activated difluoro monomers and with K₂CO₃ as a base. A series of new poly(arylene ether)s ( 8a – 8f ) were obtained that contained phenyl‐substituted m‐terphenyl segments in the polymer chain. Polymers with inherent viscosities of 0.41–0.99 dL/g were obtained in yields greater than 96%. The polymers were soluble in a variety of organic solvents, including nonpolar solvents such as toluene. Clear, transparent, and flexible films cast from CHCl₃ showed high glass‐transition temperatures (T_g = 198–270 °C) and had excellent thermal stability, as shown by temperatures of 5% weight loss greater than 500 °C. 4 was converted via N,N‐dimethyl‐O‐thiocarbamate into the masked dithiol 4,4″‐bis(N,N′‐dimethyl‐S‐thiocarbamate)‐5′‐phenyl‐m‐terphenyl and was polymerized with activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃ as a base in diphenyl sulfone as a solvent. A series of new poly(arylene thioether)s ( 9a – 9e ) were obtained with T_g values similar to those of 8a – 8e . 9a – 9e were further oxidized into poly(arylene sulfone)s with T_g values 40–80 °C higher than those for 8a – 8e and 9a – 9e . These polymers also had good solubility in organic solvents. A sulfonic acid group was selectively introduced onto the pendent phenyl group of polymers 8a and 8f by reaction with chlorosulfonic acid. The polymers were soluble in dipolar aprotic solvents and formed films via casting from dimethylformamide. Polymers 8a – 8f , 11a , and 11f showed blue and red fluorescence under ultraviolet–visible light with emission maxima at 380–440 nm. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 496–510, 2002; DOI 10.1002/pola.10136     

Synthesis and characterization of new fluorescent poly(arylene ether)s

The poly(arylene ether)s were prepared by the nucleophillic aromatic substitution polymerization of phenolphthalin and its derivatives with activated aromatic difluorides. The polymers had glass transition temperatures ranging from 210 to 240°C. Though the monomers have no fluorescence, the resulting polymers fluoresced a light green color in solid and solution states. The maximum excitation and emission wavelengths are 420 nm and 470 nm, respectively. In the polymer solutions, the fluorescence intensity decreased gradually, but the intensity was recovered by heating the polymer at 220°C for a few minutes. The fluorescent polymer had a stable radical. A model compound having the same repeating unit of the polymer was also prepared. The fluorescence properties of this model were almost the same as those of the polymers. © 1994 John Wiley & Sons, Inc.     

Star macromolecules with hyperbranched poly(arylene oxindole) cores and polyacid arms: Synthesis and solution behavior

The synthesis of pH‐sensitive star polymers with 100% hyperbranched cores and polyacrylic or polymethacrylic acid arms is reported. A series of stars obtained via atom transfer polymerization of tert‐butyl acrylate and methacrylate onto poly(arylene oxindole)s were subjected to acidic hydrolysis to obtain structures with polyacid arms. The obtained polyacid stars were characterized by NMR and FTIR spectroscopy. Dynamic and static light scattering experiments were performed to provide information regarding the shape of these macromolecules in solution. In an aqueous solution, the stars formed aggregates with a radius of gyration reaching 130 nm and aggregation numbers of up to 280 stars per particle. Similar to other polyacid‐based copolymers with different branched topologies, the dimensions and aggregation numbers were found to decrease with increasing pH. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes

A new family of hyperbranched polymers with chemical bonds between the hyperbranched polyimide and polysilsesquioxane network was synthesized by the reaction of an amine‐terminated aromatic hyperbranched polyimide with 3‐glycidoxypropyl trimethoxysilane, followed by hydrolysis and polycondensation in the presence of an acid catalyst. The hyperbranched poly(imide silsesquioxane) membranes were fabricated by the casting the aforementioned polymer solution onto a NaCl optical flat, which was followed by heating at 80 °C for 24 h. The membranes were characterized by Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, N₂ adsorption and desorption, and CO₂ adsorption and desorption. The presence of covalent bonds between the hyperbranched polyimide and polysilsesquioxane segments had a significant effect on the properties of the membranes. N₂ adsorption–desorption isotherms for these membranes showed surface areas of 6–16 m²/g, whereas CO₂ adsorption–desorption isotherms showed much higher surface areas in the range of 106–127 m²/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3736–3743, 2003     

Synthesis and characterization of thermotropic poly(alkylene fumarates)-block-poly(arylene fumarates)

Thermotropic poly(2,2′-oxydiethylene fumarate)-block-poly(2-methyl-1,4-phenylene fumarate) C is synthesized by interfacial polycondensation of α,ω-dichlorocarbonyl-poly(2,2′-oxydiethylene fumarate) and fumaroyl chloride with 2-methyl-1,4-dihydroxybenzene. A study of each block is carried out on the corresponding homopolymers as models of flexible A and rigid B blocks. Copolymer C and models are characterized by ¹H and ¹³C NMR, I.R. spectroscopy, SEC, DSC, TGA, X-Ray diffractometry and electron microscopy. A phase segregation is observed in C when B content is above 50%. Copolymer C exhibits a nematic mesophase and can be crosslinked.     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

交联型聚芳醚砜两亲嵌段聚合物的合成与表征

首先分别合成了主链上含有查尔酮结构的疏水段和侧链上含有叔胺的亲水段,然后通过疏水段与亲水段的末端缩合反应合成了一系列光敏性聚芳醚砜两亲嵌段聚合物,其结构和热性能分别通过1 H NMR,FT-IR,UV-Vis光谱,TGA和万能力学试验机等进行表征测试.该两亲性嵌段聚合物具有良好的溶解性、热稳性、力学性能和光敏性,在紫外光谱322nm处有最大吸收峰,在常温下经紫外光照射,分子链之间发生[2+2]环加成反应,聚合物分子之间形成交联结构,最大交联度可达到64%.     

Thiol-promoted catalytic synthesis of diphenolic acid with sulfonated hyperbranched poly(arylene oxindole)s

Acid-catalyzed condensation of levulinic acid and phenol into high yields of diphenolic acid (>50%) is possible with a combination of sulfonated hyperbranched polymers and thiol promotors, either added as a physical mixture or bound to the polymer by ion-pairing.     

Synthesis and characterization of cellulose fibers grafted with hyperbranched poly(3-methyl-3-oxetanemethanol)

Hyperbranched poly(3-methyl-3-oxetanemethanol) (HBPO) was directly grafted from the surface of cellulose fibers (CF) through a surface hydroxyl group-initiated ring-opening polymerization of 3-methyl-3-oxetanemethanol (MOM). TOF–SIMS, XPS, AFM, ATR-FTIR, and TGA were utilized for characterizing the resultant HBPO-grafted cellulose fibers. The content of grafted HBPO is easily adjustable by controlling feeding dosage of the MOM. To verify the reactivity of hydroxyl groups in the grafted HBPO, poly(ε-caprolactone) (PCL) was further grafted from the HBPO-grafted cellulose surface.     

Poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s derived from a dihydroxy(imidoarylene) monomer

Novel poly(arylene ether)s, poly(arylene thioether)s, and poly(arylene sulfone)s were synthesized from the dihydroxy(imidoarylene) monomer 1 . The syntheses of poly(arylene ether)s were carried out in DMAc in the presence of anhydrous K₂CO₃ by a nucleophilic substitution reaction between the bisphenol and activated difluoro compounds. Poly(arylene thioether)s were synthesized according to the recently discovered one-pot polymerization reaction between a bis(N,N′-dimethyl-S-carbamate) and activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃. The bis(N,N′-dimethyl-S-carbamate) 3 was synthesized by the thermal rearrangement reaction of bis(N,N′-dimethylthiocarbamate) 2 , which was synthesized from 1 by a phase-transfer catalyzed reaction. The poly(arylene thioether)s were further oxidized to form poly(arylene sulfone)s, which would be very difficult, if not impossible, to synthesize by other methods. All of the polymers described have extremely high T_gs and thermal stability as determined from DSC and TGA analysis. Poly(arylene sulfone)s have the highest T_gs and they are in the range of 298–361°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1201–1208, 1998     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Synthesis and characterization of ultraviolet‐curable hyperbranched poly(siloxysilane)s

Two UV‐curable hyperbranched poly(siloxysilane)s ( I and III ) containing vinyl and allyl end groups were synthesized via polyhydrosilylation with methylbis(methylethylvinylsiloxy)silane and methylbis(dimethylallylsiloxy)silane monomers. A cationic UV‐curable hyperbranched polymer ( II‐Ep ) with epoxy end groups was prepared via the hydrosilylation of hyperbranched polymer II with Si? H terminated groups and glycidyl methacrylate, and II was also obtained via the polyhydrosilylation of AB₂‐type monomer methylvinylbis(methylethylsiloxy)silane. All hydrosilylation reactions were catalyzed by Pt/C or chloroplatinic acid. Three AB₂‐type monomers were synthesized via the hydrolysis of functional chlorosilane, which was prepared with Grignard reagents and dichlorosilane. The molecular structures of the polymers were characterized with ¹H NMR, Fourier transform infrared, and gel permeation chromatography, and the UV‐curing behaviors of the polymers under different atmospheres and with different photoaccelerators were also investigated. The thermostability of uncured and cured polymers was examined with thermogravimetric analysis, and the data indicated that the orders of the onset decomposition temperatures for the cured polymers and the residue weights were as follows: III (380 °C) > I (320 °C) > II‐Ep (280 °C) and I (70.4%) > III (64.1%) > II‐Ep (60.9%), respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1883–1894, 2005     

Synthesis and characterization of novel poly(arylene ether)s containing 1,3,4-oxadiazole units

Starting from some new 2,5-disubstituted-1,3,4-oxadiazole difluorides, synthesized by cyclocondensation of dihydrazides with 4-fluorobenzoic acid, novel poly(arylene ether)s were prepared by halo displacement polymerizations with bisphenol A in the presence of potassium carbonate. Model reactions demonstrated the unsuitableness for halo displacement reactions of the difluoride containing the SO₂ group. The synthesis and characterization of polymers are discussed and the thermal properties are compared with those of other polymers reported in literature.