超声测距变结构控制系统的研究

本文在超声测距系统中采用了变结构控制理论，根据所测物体的反射界面和介质性质，自动调节超声波发射换能器的功率，建立了超声测距系统的数学模型，对系统方程进行了理论分析，研究了变结构控制系统的设计方法，并结合应用实例，对钻井法凿井用超声波测井仪中超声测距系统进行了计算机仿真，并在实验室进行了实验。     

超声频谱分析中应用自适应学习网络技术进行缺陷自动鉴别的研究

超声频谱分析是把频谱分析用于超声检验的技术，本文介绍了自行设计的超声频谱分析系统和研究开发的对频谱与缺陷作出相关分析的计算机程序，超声频谱分析系统中，研制了超声频谱探伤装置，以微机作为基本工具，利用步进采样技术对缺陷回波进行采样，通过软件进行快速傅里叶变换，获得频谱信号，然后，应用非线性自动增长的自适应学习网络技术，实现了对缺陷的自动鉴别，对有尖锐边缘与平滑边缘的两类人工缺陷所作的定性分析与横孔直径的定量分析都获得了较好的结果。     

钢质薄壁气缸套超声珩磨的研究

作者作用自行研制的立式超声珩磨装置对钢质薄壁气缸套本体进行了超声珩磨试验，分别以表面粗糙度和珩磨效率为指标对超声珩磨油石进行了正交试验，确定了超硬磨料，粒度和结合剂对表面粗糙度和珩磨效率的影响顺序，试验结果表明，超声珩磨钢质薄壁气缸套可提高珩磨效率１－３倍，表面粗糙度Ｒａ可达０．５－２．１μｍ，超声珩磨解决了钢质薄壁气缸的加工难题，开辟了一条高效率珩磨加工软钢的途径。     

一种纵扭复合换能器型超声马达的原理及实验研究

本文从纵扭振动换能器理论出发，计算了一种新的复合换能器型超声马达，并进行了实验研究，测出了其主要性能参数。     

纵-扭复合振动模式指数型复合超声变幅杆的研究

本文对指数型纵－扭复合振动模式的复合超声变幅杆进行了理论及实验研究，该变幅杆由均匀截面直棒及指数型截面杆组成。文中推出了变幅杆中纵向振动及扭转振动的共振频率方程，通过发迹指数型变截面棒的截面变化规律，实现了同一变幅杆中纵向振动与扭转振动的同频共振。     

超声溶栓

超声溶栓长期为人们所重点研究。本文对超声溶栓技术进行了综述，着重介绍和分析了其发展历史、溶栓机理、技术特点和研究现状，最后对以后的研究工作提出了一些看法。     

超声多普勒效应与人体血流彩色显象

超声医学的重大进展之一是成功地将多普勒效应用于显现人体的血流运动状况，并以彩色加以显示，使之成为对血管类疾病，特别是心血管疾病进行无损伤诊断的理想途径．本文对彩色血流显象原理、系统实现方法及其重要发展方向进行了论述．     

压电换能器阻抗匹配技术研究

超声测距传感器是由压电换能器及其收、发电路所组成的，其中压电换能器的阻抗特性直接影响着超声测距传感器的性能。为提高超声波回波信号的强度，扩大超声测距传感器的作用距离，对压电换能器的阻抗特性进行了分析与测试，设计了压电换能器的阻抗匹配电路，并进行了实验验证。     

超声耦合振动与“局部共振”现象

本文从耦合振动的角度出发，对超声加工系统中出现的“局部共振”现象进行了研究，通过对振动系统的分析用计算，指出“局部共振”流言是耦合振动的一种表现。     

对超声DOPPLER声谱图进行分类决策的两种方法

本文介绍了两种对超声多普勒血流声谱图进行了波形自动分类法决策的方法，方法一与统计得到的标准波形相比，按适当判据进行自动分类，方法二，送入训练的人工神经网络进行自动分类，待分类波形由计算多普勒信号的最大频率提取声谱包络并经分段，平均和归一化等处理得以，文中给出了计算机模拟的结果。     

A study on the best irradiation dose of X-ray for Hep-2 cells by Fourier transform infrared spectroscopy

Fourier transform infrared spectroscopy (FTIR) was employed to study the human epidermis larynx carcinoma cell lines (Hep-2) which were irradiated by different doses of X-ray.The results show that (1) the irradiation of X-ray damages the structure of the CH3 groups of the thymine in DNA,which restrains the reproduction of Hep-2 cells effectively,(2) the 8 Gy dose of X-ray irradiation changes the framework and the relative contents of some proteins,lipids and the nucleic acid molecules intercellular in the greatest degree,and (3) the 8 Gy dose of X-ray irradiation is the best irradiation dose for lowering the degree of the cancerization of Hep-2 cells according to the criteria for the degree of the cancerization reported recently.Meanwhile,the apoptosis of these cells were detected by using flow cytometry (FCM) primarily.It shows that the apoptotic ratio of the Hep-2 cells depends on the irradiation dose to some extent,but is not linearly.And the apoptotic ratio of the 12 Gy dose group is the maximum (20.36%),but the apoptotic ratios of the 2 to 8 Gy dose groups change little.     

Modification to first-order Born approximation for improved prediction of scattered sound from weakly scattering objects

When deriving the Fourier diffraction theorem based on the first-order Born approximation,the difference between wave number of the scattering object and that of the surrounding medium is ignored,causing substantial errors in sound scattering prediction.This paper modifies the Born approximation by taking into account the amplitude and phase changes between the scattering object and the water due to the wave number difference.By changing the radius and center position of the sampling circle in the Fourier domain,accuracy of the predicted sound scattering is improved.With the modified Born approximation,the computed far-field directional pattern of the scattered sound from a circular cylinder is in good agreement with the rigorous solution.Numerical calculations for several objects with different shapes are used to show applicability and effectiveness of the proposed method.     

Study on the radiation problem caused by electron beam loss in accelerator tubes

The beam dynamic code PARMELA was used to simulate the transportation process of accelerating electrons in S-band SW linacs with different energies of 2.5, 6 and 20 MeV. The results indicated that in the ideal condition, the percentage of electron beam loss was 50% in accelerator tubes. Also we calculated the spectrum, the location and angular distribution of the lost electrons. Calculation performed by Monte Carlo code MCNP demonstrated that the radiation distribution of lost electrons was nearly uniform along the tube axis, the angular distributions of the radiation dose rates of the three tubes were similar, and the highest leaking dose was at the angle of 160° with respect to the axis. The lower the energy of the accelerator, the higher the radiation relative leakage. For the 2.5 MeV accelerator, the maximum dose rate reached 5% of the main dose and the one on the head of the electron gun was 1%, both of which did not meet the eligible protection requirement for accelerators. We adopted different shielding designs for different accelerators. The simulated result showed that the shielded radiation leaking dose rates fulfilled the requirement.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Factors affecting the spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium

The spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium is discussed within the accuracy of the first-order Born approximation. It is shown that spectral shifts and spectral switches are affected both by the polarization of the incident light wave and by the characters of the scat-tering medium. Moreover, numerical results show that the direction at which the spectral switch occurs is governed by the characters of the scattering medium, whereas the magnitude of the spectral switch is affected by the polarization of the incident light wave.     

Temperature Sensitivity Control and Mechanical Stress Effect of Boron-Doped Long-Period Fiber Gratings

We will present in this work the quantitative analysis of the relationship between the doping concentrations of GeO 2 and B 2 O 3 in the core and cladding regions and the temperature sensitivity of the resonance wavelength shift in long-period fiber gratings (LPFGs). Based on this analysis, the temperature sensitivity was suppressed and enhanced to 0.002 nm/°C and 0.28 nm/°C, respectively. We will also discuss the effect of the residual mechanical stress on the optical and mechanical properties of LPFGs. In particular, we will present the measurement results of the dependence of the refractive index change and mechanical strength on the residual mechanical stress in the boron-doped fibers with depressed clad and matched clad.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Exploitation of the Fiber Capacity in Optical Networks Using Time, Frequency, and Space Division Multiple Accesses

In this work we investigate how to obtain very high capacity transmissions in optical networks taking into account the limitations due to the physical channel. We consider both the case in which all the users are connected by a star coupler and the case in which the users are directly connected by the network topology. As a reference, we consider a ring network and a Shuffle Multihop Network (SMN). The use of optical systems to implement high-capacity networks is numerically investi gated by means of numerical simulations taking into consideration the channel limitations due to the chromatic dispersion, the Kerr effect, and the amplified spontaneous emission (ASE) noise of the optical amplifiers. In our model, we consider that the signal, during the routing process that is performed at the user position, undergoes only an attenuation. We suppose the use of intensity modulated signals and receivers with direct detection. Packet switching and digital transmission are assumed with soliton and conventional nonreturn to zero signals. Both wave length and time division multiple accesses are considered. The results show that, in the case of the Time Division Multiple Access (TDMA) technique, the use of a star coupler to connect the users reduces the capacity of a network with respect to the case in which a direct connection of the users is used. This is due to the strong power fluctuations that are present during the signal propagation and to the large quantity of accumulated ASE noise. On the other hand, the use of a star coupler shows the advantage to being easily reconfigurable. The Wavelength Divison Multiple Access (WDMA) technique permits us to achieve higher capacities with respect to the TDMA. This is due to the fact that in the propagation conditions, due to the presence of a star coupler, high bit rate signals are strongly degraded. On the other hand, several low bit rate signals operating at different wavelengths can propagate with a low power level, avoiding strong degradation due to the Four Wave Mixing (FWM) effect. Among the topologies considered in this work, the SMN is the one that generally permits us to reach the highest throughput because in the SMN the signal hops in a limited number of Network Interface Units (NIUs) before reaching the final destination.     

Time domain finite volume method for the transient response and natural characteristics of structural-acoustic coupling in an enclosed cavity

A time domain finite volume method（TDFVM）based on wave theory is developed to analyze the transient response and natural characteristics of structural-acoustic coupling problems in an enclosed cavity.In the present method,the elastic dynamic equations and acoustic equation in heterogeneous medium are solved in solid domains and fluid domains respectively.The structural-acoustic coupling is implemented according to the continuity condition of the particle velocity along the normal direction and the normal traction equilibrium condition on the interface.Several numerical examples are presented to validate the effectiveness and accuracy of the present TDFVM.Then the effects of water depth on the acoustic and vibration characteristics and the natural characteristics of a structural-acoustic coupling system are analyzed.The numerical results show that the increase of water depth leads to a stronger coupling between the water and structure and the decrease of natural frequencies of coupling system,The computational cost and memory of this method are small and it can be applicable to structural-acoustic coupling problems in the heterogeneous fluid.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.