Investigation of a Cr: YAG passive Q-switch in CW pumped Nd: YAG lasers

This work describes the experimental results obtained on the Cr⁴⁺:YAG crystal used as a passive Q-switch in Nd: YAG lasers. In addition, the combination of a Cr⁴⁺: YAG passive Q-switch with an acousto-optical Q-switch operating simultaneously in one cavity was investigated. More than 180 W average output in the passive Q-switched mode was obtained with the C⁴⁺: YAG crystal. The pulse-to-pulse stability was better than 1%. A mode selection occurred when the laser system operated near threshold.     

Active–passive mode-locking using Cr:YAG crystal as saturable absorber

Cr⁴⁺ : YAG crystal was used as a saturable absorber in an active–passive mode-locked Nd : YAG laser. The stable and complete mode-locked pulse train was achieved at 1064 nm. The duration of a single pulse was obtained from 0.8 to 2.4 ns by changing the Cr⁴⁺ : YAG crystal with different initial transmission, when there was the shortest pulse width. The mode-locking dynamic process of Cr⁴⁺ : YAG crystal was analyzed by the rate equations to explain the experimental result, and the effect of excited-state absorption was considered.     

A thermally-insensitive passively Q-switched Cr:YAG/Nd:YAG laser

A passively Q-switched laser with Cr⁴⁺:YAG/Nd:YAG composite crystal using a corner cube prism cavity has been realized, in which the corner cube prism is the key element as it aids the compensation of the thermal lens effect of laser crystal. Compared with plane–plane mirror cavities under the same conditions, the stability of the laser performance using the corner cube prism cavity was improved remarkably over temperatures ranging from −40 to 65 °C. The decrease of Nd:YAG stimulated emission cross section with temperature was considered to be the main reason for the increase of average output pulse energy under the same cycle for the two different cavities when the ambient temperature changed −40 to 65 °C. The mode properties produced by the prism cavity were analyzed, and the theoretical results were verified by experimental observations.     

Investigation of kerr-lens mode-locking of a flashlamp-pumped Nd:YAG laser

In this paper, we report that mode-locked operation is realized in a flashlamp-pumped Nd:YAG laser with a nearly critical stable resonator, using LiF:F₂⁻ color center crystal as a modulation device. A single pulse train with the energy of 25 mJ and the pulse duration of 82 ps is obtained. Both the theoretical and experimental results have shown that the mode-locked operation has resulted from kerr-lens effect formed in combination with self-focusing within Nd:YAG and an aperture at a specific point, but not directly from the saturable absorption of LiF:F₂⁻ crystal.     

Nd：YAG激光器中的自锁模

本文报道在Nd:YAG激光器中首次获得的自锁模脉冲序列.自锁模是由于Nd:YAG棒中的自相位调制引起的.在主被动对撞锁模运转情况下,自锁模对脉冲波形有较大的影响.     

Diode-Pumped Passively Q-switched Single-Frequency Nd:YAG Lasers

Laser-diode pumped passively Q-switched single-frequency Nd:YAG laser has been demonstrated with a Cr⁴⁺:YAG crystal as the saturable absorber. When pumped with a fiber-coupled CW laser diode, the laser produces pulses of 1.4-20.9 ns duration, with a repetition rate of 1.9-52.0 kHz. The highest peak power of 17.6 kW was obtained at an incident pump power of 1.8 W. The use of a Cr⁴⁺:YAG saturable absorber enables the laser to operate not only in a single-frequency mode but also linearly polarized. The mode selection mechanism is discussed.     

Investigation on a colliding pulse mode-locking(Ce~(3 ),Nd~(3 )):YAG laser using an unstable resonator

An investigation on the characteristics of a passive colliding pulse mode-locking(Ce~(3 ),Nd~(3 )):YAG laser using an unstable resonator containing an antiresonant ring hasbeen completed.Using a Ф3×40mm active medium and the pentanethine cyanine dissolved in1,2-dichloethane as a saturable absorber,9 picosecond pulse-width and 3.2 mJ output energywere obtained.The optimum initial transmission of the absorbing cell was determined.     

High power Nd:YAG slab laser sidepumped by diode laser array

ＨｉｇｈｐｏｗｅｒＮｄ：ＹＡＧｓｌａｂｌａｓｅｒｓｉｄｅｐｕｍｐｅｄｂｙｄｉｏｄｅｌａｓｅｒａｒｒａｙＣＨＥＮＹｏｕｍｉｎｇ；ＺＨＯＵＦｕｚｈｅｎｇ；ＨＵＷｅｎｔａｏ；ＬＩＺｈｉｓｈｅｎ；ＹＡＮＧＸｉａｎｇｃｈｕｎ；ＷａｎｇＺｈｉｊｉａｎｇ（Ｓｈａｎ...     

Cr,Nd:YAG self-Q-switched laser with high efficiency output

The high efficient laser performance of self-Q-switched laser in the co-doped Cr⁴⁺,Nd³⁺:YAG microchip with 1.8 mm thickness was demonstrated. The slope efficiency is varied with the reflectivity of output coupler at 1064 nm, and the highest slope efficiency of 26% was obtained for 95% reflectivity of output coupler at 1064 nm. The pulse width, the single pulse energy and the pulse repetition rate for different reflectivity of the output couplers were measured, and the experimental results agree with the numerical calculations of the passively Q-switched rate equations. This can lead to develop the diode laser pumped monolithic self-Q-switched solid-state microchip lasers, especially for the intracavity frequency-doubled solid-state microchip lasers.     

Experimental study of electro-optical Q-switched pulsed Nd:YAG laser

We report the specification of a compact and stable side diode-pumped Q-switched pulsed Nd:YAG laser. We experimentally study and compare the performance of the pulsed Nd:YAG laser in the free-running and Q-switched modes at different pulse repetition rates from 1 Hz to 100 Hz. The laser output energy is stabilized by using a special configuration of the optical resonator. In this laser, an unsymmetrical concave-concave resonator is used and this structure helps the mode volume to be nearly fixed when the pulse repetition rate is increased. According to the experimental results in the Q-switched operation, the laser output energy is nearly constant around 70 mJ with an FWHM pulse width of 7 ns at 100 Hz. The optical-to-optical conversion efficiency in the Q-switched regime is 17.5%.     

Optimization of passively Q-switched and mode-locked laser with Cr:YAG saturable absorber

By considering the Gaussian spatial distributions of the intracavity photon density and the initial population-inversion density, the coupled rate equations for a diode-pumped passively Q-switched and mode-locked (QML) laser with Cr⁴⁺:YAG saturable absorber are given. These coupled rate equations are solved numerically and the key parameters of an optimally coupled passively QML laser are determined for the first time. These key parameters include the parameters of the gain medium, the saturable absorber and the resonator, which can maximize the pulse energy of singly Q-switched envelope. The optimal calculations for a diode-pumped passively QML Nd:GdVO₄ laser with Cr⁴⁺:YAG saturable absorber are presented to demonstrate the numerical simulation applicable.     

角锥棱镜腔Nd:YAG/Cr4+:YAG被动锁模激光器的研究

理论分析并数值模拟了腔内光强随角锥棱镜旋转的变化,实验证明在角锥棱镜腔Nd:YAG/Cr4 :YAG被动锁模激光器中,偏振耦合输出得到了锁模深度和锁模几率近乎100%的线偏振被动锁模脉冲输出.通过旋转角锥棱镜改变偏振耦合输出、调节腔内光强,可以得到被动锁模和被动调Q两种状态的脉冲输出,脉冲能量166.5 mJ/pulse,脉冲动静比高达59.7%.     

A parametric study of pulsed Nd:YAG laser micro-drilling of gamma-titanium aluminide

In the present research, Nd:YAG laser micro-drilling of gamma-titanium aluminide, a new material which has performed well in laboratory tests as well as in different fields of engineering, is studied. The effect of different process parameters in the optimization of the process is investigated. The aspects considered are the hole circularity at exit and the hole taper of the drilled hole. Lamp current, pulse frequency, air pressure and thickness of the job are selected as independent process variables. The central composite design (CCD) technique based on response surface methodology (RSM) is employed to plan the experiments to achieve optimum responses with a reduced number of experiments.     

Cr^4＋：YAG在对撞脉冲锁模的Nd：YAG激光器中实现被动锁模的研究

在理论上提出了Ｃｒ＾４＋：ＹＡＧ作为可饱和吸收体在Ｎｄ：ＹＡＧ激光器中实现被动锁模的可能性，运用速率方程组导出在强激光脉冲作用下Ｃｒ＾４＋：ＹＡＧ激发态吸收的恢复时间和饱和光强。实验上在带有抗共振环结构的接近于介稳腔的脉冲式Ｎｄ：ＹＡＧ激光器中用Ｃｒ＾４＋：ＹＡＧ作为可饱和吸收体实现被动锁模运转，得到能量１３．５ｍＪ、平均脉宽１８０ｐｓ的锁模脉冲序列。     

Laser performance of monolithic Cr,Nd:YAG self-Q-switched laser

The self-Q-switched laser performance of monolithic Cr⁴⁺,Nd³⁺:YAG concave-planar resonator with 5-mm length was studied experimentally and theoretically. The slope efficiency is as high as 24% and pump threshold is as low as 64 mW. The pulse width, the single pulse energy and the pulse repetition rate of monolithic Cr,Nd:YAG self-Q-switched laser were measured as a function of absorbed pump power. With the increase of pump power, the pulse width decreases and the pulse energy and the pulse repetition rate increase. The average output power of 91 mW with pulse width of 7 ns at repletion rate of 35.5 kHz was obtained at the maximum absorbed pump power of 440 mW, the peak power is as high as 370 W. The theoretical prediction of pulse energy, pulse width and pulse repetition rate as a function of absorbed pump power based on rate equations is in a good agreement with our experimental data. This can lead to develop the diode laser-pumped monolithic self-Q-switched solid-state microchip lasers.     

透明Nd:YAG激光陶瓷的研究与应用进展

综述了近年来,特别是近两年来国内外透明Nd:YAG激光陶瓷的研究与应用情况,重点对我国的透明Nd:YAG激光陶瓷研究近况进行了分析,指出了透明Nd:YAG激光陶瓷是目前陶瓷研究的热点。提出了透明Nd:YAG激光陶瓷研究中尚存在的问题和我国在此领域中与国外研究的巨大差距。分析指出:我国研究透明Nd:YAG激光陶瓷的各个院所之间,应该强强联合,优势互补,对该领域的理论和制备工艺进行更为深入的研究。     

高平均功率六棒串接脉冲Nd:YAG激光器

报道了一种腔内六棒串接的脉冲Nd:YAG激光器。采用44矩阵对晶体棒失调角度对谐振腔光轴的影响进行了理论分析,给出了六棒串接脉冲激光器中晶体棒失调角度的允许范围。在串接实验中,谐振腔采用对称平平腔结构,通过调整每根晶体棒的失调角度到允许范围内,实现了六棒串接脉冲Nd:YAG激光器。在输入电功率86 kW,占空比17%时,获得了平均功率3 018 W的脉冲激光输出,峰值功率17.75 kW,最高单脉冲能量为66 J,光束参数乘积为26.3 mmmrad,电光转换效率3.5%,长时间工作不稳定性小于2%。     

Tunable single-mode pulsed Ti3+:Sapphire laser injection-seeded by a continuous-wave Cr3+:LiSrAlF6 laser

Spectrally pure high-power tunable single-mode operation of a pulsed Ti³⁺:sapphire laser by a tunable injection-seeding is reported. The injection laser was a cw diode laser pumped, spectrally narrowed tunable Cr³⁺:LiSrAlF₆ (Cr³⁺:LiSAF) laser with a grating in the auxiliary cavity. Single-mode tunable operation of a pulsed Ti³⁺: sapphire ring oscillator was obtained at different wavelengths in the range between 818 nm and 848 nm with a typical linewidth of 0.006 cm^-1. To extend the applicability of this operation to a differential absorption lidar system, the single-mode Ti³⁺:sapphire oscillator output was amplified and a high energy output of 38 mJ was obtained with the same linewidth.     

Potential of Nd:YAG pulsed laser deposition method for coated conductor production

A Nd:YAG laser is environmentally safe and economical with no poisonous or hazardous gases and no expensive gases. We prepared Y123 films by using the fourth harmonic Nd:YAG pulsed laser deposition (PLD) method and optimized the deposition conditions on MgO single crystalline substrates and IBAD-MgO substrates for Y123 coated conductor. We found that the optimal deposition conditions acquired bi-axially aligned Y123 films on both substrates with T_c ∼ 90 K and J_c > 1 MA/cm² at 77 K in self-field. For obtaining high I_c, we fabricated thick Y123 films on both substrates and the maximum I_c per 1 cm in width reached 186 A/cm-width on the IBAD-MgO substrate. Interestingly, there were no a-axis oriented grains within the films up to 1.8 μm thick. This might be an especial feature of the Nd:YAG-PLD method. We believe that the Nd:YAG-PLD method is promising method for RE123 coated conductor production.     

Nd:YVO4自受激拉曼激光器调Q锁模特性

利用Nd:YVO4激光晶体的自受激拉曼效应,结合Cr:YAG被动锁模技术和倍频技术,实现了结构紧凑的1176 nm和588 nm黄光锁模激光输出。激光器为LD端面泵浦,三镜折叠腔结构,并且采用了透过率为10%的输出镜。Nd:YVO4晶体长度为10 mm,Nd3+离子掺杂质量分数为0.2%,Cr:YAG晶体的初始透过率为67%。10 W激光泵浦时,1176 nm激光平均输出功率为123 mW,调Q包络宽度为6 ns,调Q包络内的锁模脉冲重复频率高达1 GHz。588.2 nm 黄光的平均输出功率为8 mW。