Assessing protease activity pattern by means of multiple substrate ESI-MS assays

The development of a simultaneous multiple substrate enzymatic assay based on electrospray ionization mass spectrometry (ESI-MS) detection is described. This multiplexing assay scheme was employed in a parallel proteolytic enzyme activity screening. As model systems, the respective activities of trypsin, thrombin, chymotrypsin, bromelain, ficin and elastase towards seven different substrates were assessed. The resulting activity patterns were evaluated semi-quantitatively ranking the enzymatic activities in five classes of activity (very high, high, medium, low and no activity) with respect to the individual substrates. The validity of the MS-based multiplexing assay scheme was proved by comparison with the results obtained from single substrate assays detected by means of UV/vis absorption at 405 nm, showing good agreement of the resulting activity patterns and classifications.     

Electrophoretic assay for penicillinase: substrate specificity screening by parallel CE with an active pixel sensor

We report application of a new UV imaging detector incorporating an active pixel sensor in an electrophoretic enzyme assay for penicillinase (beta-lactamase) with multiple substrates. The method based on electrophoretically mediated microanalysis was developed on a standard CE system with a single-point diode array detector and 200 nm UV wavelength, then transferred to a parallel capillary setup with the UV imaging detector for screening of penicillinase substrate specificity. One capillary is used for the assay and the other for reference, with an enzyme solution plug introduced into the first at the same time as a water plug into the second capillary. A mixture of antibiotics and markers is subsequently introduced as a sample plug to both capillaries, and driven through the enzyme (or water) plug by application of voltage. Most individual reactant and product peaks were separated and compounds amenable to beta-lactam hydrolysis could readily be identified and the extent of the reaction quantified within a single electrophoretic run.     

Multiplex inhibitor screening and kinetic constant determinations for yeast hexokinase using mass spectrometry based assays

An electrospray ionization mass spectrometry based assay was developed for kinetic measurements and inhibitor screening of yeast hexokinase. There is considerable discrepancy in the literature as to the accuracy of kinetic data obtained for hexokinase. In the assay described herein, the product, glucose 6-phosphate was directly monitored by ion trap mass spectrometry and quantified using an internal standard, 2 deoxy-glucose 6-phosphate. The kinetic parameters, K(M) and V(max) for the two substrates were determined without using a coupling enzyme as is normally employed in the traditional spectrophotometric assay for systems lacking a chromophore. In addition, hexokinase was successfully immobilized onto an amino-link gel, and a mock library was screened against the immobilized enzyme for the identification of possible inhibitors. After comparing the mass spectra of the library before and after incubation, trehalose 6-phosphate, ADP, and oxidized glutathione were differentiated from other weak or non-inhibitors. Inhibition behavior of ADP with respect to ATP was further evaluated with the ESI-MS assay and the value of K(i) was determined. This ESI-MS assay was demonstrated to be both accurate and precise for determining kinetic constants and for identifying enzyme inhibitors.     

Peptide microarrays for the determination of protease substrate specificity

A method is described for the preparation of substrate microarrays that allow for the rapid determination of protease substrate specificity. Peptidyl coumarin substrates, synthesized on solid support using standard techniques, are printed onto glass slides using DNA microarraying equipment. The linkage from the peptide to the slide is formed through a chemoselective reaction, resulting in an array of uniformly displayed fluorogenic substrates. The arrays can be treated with proteases to yield substrate specificity profiles. Standard instrumentation for visualization of microarrays can be used to obtain comparisons of the specificity constants for all of the prepared substrates. The utility of these arrays is demonstrated by the selective cleavage of preferred substrates with trypsin, thrombin, and granzyme B, and by assessing the extended substrate specificity of thrombin using a microarray of 361 different peptidyl coumarin substrates.     

Electrophoretic method for assessment of substrate promiscuity of a heterogeneous biocatalyst using an area imaging ultraviolet detector

We report a new electrophoretic set-up and method for rapid specificity screening of an immobilised enzyme against a range of substrates present in a mixture. The penicillinase-catalysed reaction is carried out on-the-fly, following separation of putative substrates and preceding separation of the reaction products. The new active pixel sensor detector gives an option of using multiple detection windows on a single flow line and enables efficient on-line monitoring of this heterogeneous biocatalytic process with multiple putative substrates injected simultaneously.     

Alkaline phosphatase assay using a near-infrared fluorescent substrate merocyanine 700 phosphate

Alkaline phosphatase (ALP) is a phosphomonoester hydrolase that is commonly used as a conjugating enzyme in biological research. A wide variety of substrates have been developed to assay its activity. In this study, we developed an ALP assay method utilizing merocyanine 700 (MC700) based substrate MC700 phosphate (MC700p). MC700 is a near-infrared fluorescent merocyanine dye, and has excitation/emission maxima at 686 nm/722 nm in ALP assay buffer. Upon hydrolysis by ALP, MC700p is converted to MC700. The fluorescence of MC700 is dependent on the pH and detergent concentration in the buffer. The fluorescence signal produced by MC700p hydrolysis is linearly related to the ALP amount and substrate concentration. A stop solution containing EDTA could be used to stop the ALP/MC700p reaction. It was also demonstrated that MC700p could substitute pNpp as the ALP substrate in a commercial 17β-Estradiol enzyme immunoassay kit.     

Mass spectrometric kinetic analysis of human tyrosylprotein sulfotransferase-1 and -2

Protein tyrosine O-sulfation, a widespread post-translational modification, is mediated by two Golgi enzymes, tyrosylprotein sulfotransferase-1 and-2. These enzymes catalyze the transfer of sulfate from the universal sulfate donor 3′-phosphoadenosine-5′-phosphosulfate (PAPS) to the hydroxyl group of tyrosine residues to form tyrosine O-sulfate ester and PAP. More than 60 proteins have been identified to be tyrosine sulfated including several G protein-coupled receptors, such as CC-chemokine receptor 8 (CCR8) that is implicated in allergic inflammation, asthma, and atherogenesis. However, the kinetic properties of purified tyrosylprotein sulfotransferase (TPST)-1 and −2 have not been previously reported. Moreover, currently there is no available quantitative TPST assay that can directly monitor individual sulfation of a series of tyrosine residues, which is present in most known substrates. We chose an MS-approach to address this limitation. In this study, a liquid chromatography electrospray ionisation mass spectrometry (LC/ESI-MS)-based TPST assay was developed to determine the kinetic parameters of individual TPSTs and a mixture of both isozymes using CCR8 peptides as substrates that have three tyrosine residues in series. Our method can differentiate between mono-and disulfated products, and our results show that the K_m,app for the monosulfated substrate was 5-fold less than the nonsulfated substrate. The development of this method is the initial step in the investigation of kinetic parameters of the sequential tyrosine sulfation of chemokine receptors by TPSTs and in determining its catalytic mechanism.     

Determination of kinetic parameters for interfacial enzymatic reactions on self-assembled monolayers

This paper reports a method to characterize the kinetic constants for the action of enzymes on immobilized substrates. This example uses cutinase, a serine esterase that hydrolyzes 4-hydroxyphenyl valerate moieties that are immobilized on a self-assembled monolayer of alkanethiolates on gold. The product of the enzyme reaction is a hydroquinone, which is redox active and therefore permits the use of cyclic voltammetry to monitor the extent of reaction in situ. A kinetic model based on the Michaelis-Menten formalism is used to analyze the dependence of initial rates of reaction on both the substrate density and the enzyme concentration. The resulting value of k(cat)/K(M) for the interfacial reaction is comparable to that for a homogeneous phase reaction with a substrate of similar structure. This strategy of using monolayers presenting substrates for the enzyme and cyclic voltammetry to measure reaction rates provides quantitative and real-time information on reaction rates and permits a level of analysis of interfacial enzyme reactions that to date has been difficult to realize.     

Dependence of transition state structure on substrate: the intrinsic C-13 kinetic isotope effect is different for physiological and slow substrates of the ornithine decarboxylase reaction because of different hydrogen bonding structures

Ornithine decarboxylase is the first and the rate-controlling enzyme in polyamine biosynthesis; it decarboxylates l-ornithine to form the diamine putrescine. We present calculations performed using a combined quantum mechanical and molecular mechanical (QM/MM) method with the AM1 semiempirical Hamiltonian for the wild-type ornithine decarboxylase reaction with ornithine (the physiological substrate) and lysine (a "slow" substrate) and for mutant E274A with ornithine substrate. The dynamical method is variational transition state theory with quantized vibrations. We employ a single reaction coordinate equal to the carbon-carbon distance of the dissociating bond, and we find a large difference between the intrinsic kinetic isotope effect for the physiological substrate, which equals 1.04, and that for the slow substrate, which equals 1.06. This shows that, contrary to a commonly accepted assumption, kinetic isotope effects on slow substrates are not always good models of intrinsic kinetic isotope effects on physiological substrates. Furthermore, analysis of free-energy-based samples of transition state structures shows that the differences in kinetic isotope effects may be traced to different numbers of hydrogen bonds at the different transition states of the different reactions.     

Screening for proteolytic activities in snake venom by means of a multiplexing electrospray ionization mass spectrometry assay scheme

A multiplexed mass spectrometry based assay scheme for the simultaneous determination of five different substrate/product pairs was developed as a tool for screening of proteolytic activities in snake venom fractions from Bothrops moojeni. The assay scheme was employed in the functional characterization of eight model proteases. Time-resolved reaction profiles were generated and the relative reaction progress at each time point was determined. These were used to semi-quantitatively sort the catalytic activities of each enzyme towards the respective substrates into six classes. The resulting activity pattern served as an activity fingerprint for each enzyme. The multiplex assay scheme was then applied to a screening for proteolytic activities in fractions of the pre-separated venom from B. moojeni. Activity patterns of each fraction were generated and used to sort the fractions into three different categories of activity. By comparison of the fingerprint activity patterns of the venom fractions and the model enzymes, a compound with proteolytic properties similar to activated protein C was detected.     

Quantitative analysis of the stabilization by substrate of Staphylococcus aureus PC1 beta-lactamase

BACKGROUND: The stabilization of enzymes in the presence of substrates has been recognized for a long time. Quantitative information regarding this phenomenon is, however, rather scarce since the enzyme destroys the potential stabilizing agent during the course of the experiments. In this work, enzyme unfolding was followed by monitoring the progressive decrease of the rate of substrate utilization by the Staphylococcus aureus PC1 beta-lactamase, at temperatures above the melting point of the enzyme. RESULTS: Enzyme inactivation was directly followed by spectrophotometric measurements. In the presence of substrate concentrations above the K(m) values, significant stabilization was observed with all tested compounds. A combination of unfolding kinetic measurements and enzymatic studies, both under steady-state and non-steady-state regimes, allowed most of the parameters characteristic of the two concurrent phenomena (i.e. substrate hydrolysis and enzyme denaturation) to be evaluated. In addition, molecular modelling studies show a good correlation between the extent of stabilization, and the magnitude of the energies of interaction with the enzyme. CONCLUSIONS: Our analysis indicates that the enzyme is substantially stabilized towards heat-induced denaturation, independently of the relative proportions of non-covalent Henri-Michaelis complex (ES) and acyl-enzyme adduct (ES*). Thus, for those substrates with which the two catalytic intermediates are expected to be significantly populated, both species (ES and ES*) appear to be similarly stabilized. This analysis contributes a new quantitative approach to the problem.     

Studies on the substrate specificity of Escherichia coli galactokinase

In vitro glycorandomization (IVG) technology is dependent upon the ability to rapidly synthesize sugar phosphates. Compared with chemical synthesis, enzymatic (kinase) routes to sugar phosphates would be attractive for this application. This work focuses upon the development of a high-throughput colorimetric galactokinase (GalK) assay and its application toward probing the substrate specificity and kinetic parameters of Escherichia coli GalK. The demonstrated dinitrosalicylic assay should also be generally applicable to a variety of sugar-processing enzymes. [reaction: see text]     

Rational design of transglutaminase substrate peptides for rapid enzymatic formation of hydrogels

Short peptide substrates with high specificity toward transglutaminase (TGase) enzyme were designed, characterized, and coupled to a biocompatible polymer, allowing for rapid enzymatic cross-linking of peptide-polymer conjugates into hydrogels. Eight acyl acceptor Lys-peptide substrates and three acyl donor Gln-peptide substrates were rationally designed and synthesized. The kinetic constants of these peptides toward tissue transglutaminase were measured by enzyme assay using RP-HPLC analysis with the aid of LC-ESI/MS. Several acyl donor and acyl acceptor peptides with high specificities toward TGase were identified, including a few containing the unusual amino acid l-3,4-dihydroxylphenylalanine (DOPA), which is found in the adhesive proteins secreted by marine and freshwater mussels. Acyl donor and acyl acceptor peptides with high substrate specificities were separately coupled to branched poly(ethylene glycol) (PEG) polymer molecules. Equimolar solutions of these polymer-peptide conjugates rapidly formed hydrogels in less than 2 min in the presence of transglutaminase under physiological conditions. The use of biocompatible building blocks, their rapid solidification from a liquid precursor under physiologic conditions, and the ability to incorporate adhesive amino acid residues using biologically benign enzymatic cross-linking are advantageous properties for the use of such materials for tissue repair, drug delivery, and tissue engineering applications.     

Screening for protease substrate by polyvalent phage display

Proteases are key regulators of many physiological and pathological processes [1,2], and are recognized as important and tractable drug candidates. Consequently, knowledge of protease substrate recognition and specificity promotes identification of biologically relevant substrates, helps elucidating a protease's biological function, and the design of specific inhibitors. Traditional methods for establishing substrate recognition profiles involve the identification of the scissile bond within a given protein substrate by proteomic methods such as Edman degradation. Then, synthetic peptide variants of this sequence can be screened in an iterative fashion to arrive at more optimized substrates. Even though it can be fruitful, this iterative strategy is biased toward the original substrate sequence and it is also tremendously cumbersome. Furthermore, it is not amenable to high throughput analysis. In 1993, Matthew & Wells presented a method for the use of monovalent "substrate phage" libraries for discovering peptide substrates for proteases, in which more than 10(7) potential substrates can be tested concurrently [3]. A library of fusion proteins was constructed containing randomized substrate sequences placed between a binding domain and the gene III coat protein of the filamentous phage, M13, which displays the fusion protein and packages the gene coding for it inside. Each fusion protein was displayed as a single copy on filamentous phagemid particles (substrate phage). This method allows one to rapidly survey the substrate recognition and specificity of individual or closely related members of proteases. Over the past decade, substrate phage screening has shown terrific utility in rapidly determining protease specificity and characterization of substrate recognition profile of proteases. In some cases, the structural insights of the catalytic domain were obtained from comparison of substrate specificity among closely related family of proteases [4-6]. The number of proteases (from various classes) characterized by this approach testifies to its power. Since the initial development of substrate phage library, different versions of the substrate phage cloning vectors have been constructed to further improve the utility of substrate phage display. This review will provide an overview of the construction of substrate phage display libraries, screening of substrate phage libraries, examples of application, summary and future directions.     

Substrate specificity and novel selective inhibitors of TNF-alpha converting enzyme (TACE) from two-dimensional substrate mapping

We report a systematic analysis of the P1' and P2' substrate specificity of TNF-alpha converting enzyme (TACE) using a peptide library and a novel analytical method, and we use the substrate specificity information to design novel reverse hydroxamate inhibitors. Initial truncation studies, using the amino acid sequence around the cleavage site in precursor-TNF-alpha, showed that good turnover was obtained with the peptide DNP-LAQAVRSS-NH2. Based on this result, 1000 different peptide substrates of the form Biotin-LAQA-P1'-P2'-SSK(DNP)-NH2 were prepared, with 50 different natural and unnatural amino acids at P1' in combination with 20 different amino acids at P2'. The peptides were pooled, treated with purified microsomal TACE, and the reaction mixtures were passed over a streptavidin affinity column to remove unreacted substrate and the N-terminal biotinylated product. C-terminal cleavage products not binding to streptavidin were subjected to liquid chromatography/mass spectrometry analysis where individual products were identified and semiquantitated. 25 of the substrates were resynthesized as discrete peptides and assayed with recombinant TACE. The experiments show that recombinant TACE prefers lipophilic amino acids at the P1' position, such as phenylglycine, homophenylalanine, leucine and valine. At the P2' position, TACE can accommodate basic amino acids, such as arginine and lysine, as well as certain non-basic amino acids such as citrulline, methionine sulfoxide and threonine. These substrate preferences were used in the design of novel reverse hydroxamate TACE inhibitors with phenethyl and 5-methyl-thiophene-methyl side-chains at P1', and threonine and nitro-arginine at P2'.     

Alterations of lipoxygenase specificity by targeted substrate modification and site-directed mutagenesis

BACKGROUND: Mammalian lipoxygenases (LOXs) are categorised with respect to their positional specificity of arachidonic acid oxygenation. However, the mechanistic basis for this classification is not well understood. To gain a deeper insight into the structural basis of LOX specificity we determined the reaction characteristics of wild-type and mutant mammalian LOX isoforms with native and synthetic fatty acids substrates. RESULTS: The rabbit 15-LOX is capable of catalysing major 12-lipoxygenation when the volume of the substrate-binding pocket is enlarged. These alterations in the positional specificity can be reversed when bulky residues are introduced at the omega end of the substrate. Simultaneous derivatisation of both ends of fatty acids forces a 15-LOX-catalysed 5-lipoxygenation and this reaction involves an inverse head-to-tail substrate orientation. In contrast, for arachidonic acid 5-lipoxygenation by the human 5-LOX the substrate fatty acid may not be inversely aligned. The positional specificity of this isoenzyme may be related to its voluminous substrate-binding pocket. Site-directed mutagenesis, which leads to a reduction of active site volume, converts the 5-LOX to a 15-lipoxygenating enzyme species. CONCLUSIONS: The positional specificity of LOXs is not an invariant enzyme property but depends on the substrate structure and the volume of the substrate-binding pocket. 15-LOX-catalysed 5-lipoxygenation involves an inverse substrate alignment but this may not be the case for 5-LOXs. Thus, both theories for the mechanistic basis of 5-lipoxygenation (straight and inverse substrate orientation) appear to be correct for different LOX isoforms.     

Method development and measurements of endogenous serine/threonine Akt phosphorylation using capillary electrophoresis for systems biology

Signal transduction studies have indicated that Akt is essential for transducing the signals originating from extracellular stimuli. An exploration of the Akt signal transduction mechanism depends on the ability to assay its activation states by determining the ability of Akt to phosphorylate various substrates. This paper describes a CE-based kinase assay for Akt using a UV detection method. The RPRAATF peptide was used as the specific substrate to determine the Akt activity. Under the CE separation conditions used, the phosphorylated and nonphosphorylated forms of the RPRAATF peptide were rapidly resolved in the Akt reaction mixture within 20 min. Using this method for measuring the Akt activity, the incubation time for the Akt reactions as well as the kinetic parameters (KM) were examined. Furthermore, the developed method was applied to a PC12 cell system to assess the dynamics of the Akt activity by examining the effectiveness of the RPRAATF peptide substrate under various cytokine-stimulated environments. These results highlight the feasibility of the CE method, which is a simple and reliable technique for determining and characterizing various enzyme reactions particularly kinase enzymes.     

Systematic re-evaluation of the bis(2-hydroxyethyl)disulfide (HEDS) assay reveals an alternative mechanism and activity of glutaredoxins

The reduction of bis(2-hydroxyethyl)disulfide (HEDS) by reduced glutathione (GSH) is the most commonly used assay to analyze the presence and properties of enzymatically active glutaredoxins (Grx), a family of central redox proteins in eukaryotes and glutathione-utilizing prokaryotes. Enzymatically active Grx usually prefer glutathionylated disulfide substrates. These are converted via a ping-pong mechanism. Sequential kinetic patterns for the HEDS assay have therefore been puzzling since 1991. Here we established a novel assay and used the model enzyme ScGrx7 from yeast and PfGrx from Plasmodium falciparum to test several possible causes for the sequential kinetics such as pre-enzymatic GSH depletion, simultaneous binding of a glutathionylated substrate and GSH, as well as substrate or product inhibition. Furthermore, we analyzed the non-enzymatic reaction between HEDS and GSH by HPLC and mass spectrometry suggesting that such a reaction is too slow to explain high Grx activities in the assay. The most plausible interpretation of our results is a direct Grx-catalyzed reduction of HEDS. Physiological implications of this alternative mechanism and of the Grx-catalyzed reduction of non-glutathione disulfide substrates are discussed.     

Study of substrate inhibition by electrophoretically mediated microanalysis in partially filled capillary

Substrate inhibition is a common phenomenon in enzyme kinetics. We report here for the first time its study by a combination of the electrophoretically mediated microanalysis (EMMA) methodology with a partial filling technique. In this setup, the part of capillary is filled with the buffer best for the enzymatic reaction whereas, the rest of the capillary is filled with the background electrolyte optimal for separation of substrates and products. In the case of haloalkane dehalogenase, a model enzyme selected for this study, the enzymatic reaction was performed in 20 mM glycine buffer (pH 8.6) whereas 20 mM beta-alanine-hydrochloric acid buffer (pH 3.5) was used as a background electrolyte in combination with direct detection at 200 nm. The whole study was performed on poorly soluble brominated substrate--1,2-dibromoethane. As a result it was first necessary to find the compromise between the concentrations of the enzyme and the substrate preserving both the adequate sensitivity of the assay and at the same time the attainable substrate solubility. By means of the developed EMMA methodology we were able to determine the Michaelis constant (K(M)) as well as the substrate inhibition constant (K(SI)). The value of K(M) and K(SI) obtained were 7.7+/-2.5 mM and 1.1+/-0.4 mM, respectively. Observation of the substrate inhibition of haloalkane dehalogenase by 1,2-dibromoethane is in accordance with previous literature data.     

A SNaPshot assay for genotyping 44 individual identification single nucleotide polymorphisms

Single nucleotide polymorphisms (SNPs), which have relatively low mutation rates and can be genotyped after PCR with shorter amplicons compared with short tandem repeats (STRs), are being considered as potentially useful markers in forensic DNA analysis. Those SNPs with high heterozygosity and low Fst (F-statistics) in human populations are described as individual identification SNPs, which perform the same function as STRs used in forensic routine work. In the present study, we developed a multiplex typing method for analyzing 44 selected individual identification SNPs simultaneously by using multiplex PCR reaction in association with fluorescent labeled single base extension (SBE) technique. PCR primers were designed and the lengths of the amplicons ranged from 69 to 125?bp. The population genetics data of 79 unrelated Chinese individuals for the 44 SNP loci were investigated and a series of experiments were performed to validate the characteristic of the SNP multiplex typing assay, such as sensitivity, species specificity and the performance in paternity testing and analysis of highly degraded samples. The results showed that the 44-SNPs multiplex typing assay could be applied in forensic routine work and provide supplementary data when STRs analysis was partial or failed.