Electrical conductivity measurements of aqueous sodium chloride solutions to 600°C and 300 MPa

Electrical conductance measurements of dilute (<0.1>^–1) aqueous NaCl solutions were made primarily to quantify the degree of ion association which increases with increasing temperature and decreasing solvent density. These measurements were carried out at temperatures from 100 to 600°C and pressures up to 300 MPa with a modified version of the apparatus used previously in the high temperature study in this laboratory. Particular emphasis was placed on conditions close to the critical temperaturelpressure region of water, i.e., at 5° intervals from 370 to 400°C. The results verify previous findings that the limiting equivalent conductance A_o of NaCl increases linearly with decreasing density from 0.75 to 0.3 g-cm^–1 and also with increasing temperature from 100 to 350°C. Above 350°C. A_o is virtually temperature independent. The logarithm of the molal association constant as calculated exclusively from the data400°C is represented as a function of temperature (Kelvin) and the logarithm of the density of water (g-cm^–3) as follows:

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Potentiometric Determination of the First Hydrolysis Constant of Gallium(III) in NaCl Solution to 100°C

The hydrolysis equilibrum of gallium (III) solutions in aqueous 1 mol-kg^–1 NaCl over a range of low pH was measured potentiometrically with a hydrogen ion concentration cell at temperatures from 25 to 100°C at 25°C intervals. Potentials at temperatures above 100°C increased gradually because of further hydrolysis of the gallium(III) ion, followed by precipitation. The results were treated with a nonlinear least-squares computer program to determine the equilibrium constants for gallium(III)–hydroxo complexes using the Debye–Hückel equation. The log K (mol-kg^–1) values of the first hydrolysis constant for the reaction, Ga³⁺ + H₂O GaOH²⁺ + H⁺ were –2.85 ± 0.03 at 25°C, –2.36 ± 0.03 at 50°C, –1.98 ± 0.01 at 75°C, and –1.45 ± 0.02 at 100°C. The computed standard enthalpy and entropy changes for the hydrolysis reaction are presented over the range of experimental temperatures.     

The apparent molar heat capacity of aqueous hydrochloric acid from 10 to 140°C

The apparent molar heat capacity of aqueous HCl, C _p,, has been measured at temperatures of 25, 76, 103, 125 and 140°C and molalities from 0.1 to 1.02 mol-kg^–1 using a Picker flow microcalorimeter. The results were analyzed using the Pitzer and the Helgeson-Kirkham-Flowers models to derive standard state heat capacities. The fitted parameters were also used to extrapolate the standard EMF of the silver-silver chloride reference electrode at steam saturation from 0 to 200°C and the mean ionic activity coefficient, _± (HCl,aq) to 225°C, with an accuracy at the highest temperature of 2 mV and 4%, respectively. The results confirm that experimental values of C _p, to just over 100°C can be used to extrapolate standard state and excess Gibbs energies above 250°C, when the corresponding enthalpies at 25°C are accurately known.     

Products of the ozonolysis of epitorulosol

The structure of the products of the ozonization of epitorulosol [13S-labda-8(20),14-diene-13,19-diol] (I) has been established. Compound (I) (1 g) was ozonized at –30°C in 100 ml of absolute CH₃OH until saturation. The O₃ was driven off by nitrogen, 1 ml of (CH₃)₂S was added at –10°C, and the mixture was stirred for 1 h each at –10, 0, and 20°C and was worked up, and the product (1.13 g) was chromatographed on a column containing 45 g of silica gel. The following were eluted in the order of increasing polarity: 420 mg of 19-hydroxy-8,13;8,14-diepoxy-13S-15,20-bisnorlabdan-14-one (II), mp 141.5–142.5°C (from petroleum ether), [] _D ²³ –63° (c 3.1); 255 mg of 8,13;8,14-diepoxy-13S-15,20-bisnorlabdane-14,19-diol (III), characterized in the form of the diacetate (IV) with mp 100–107°C (from petroleum ether); and 117 mg of 19-hydroxy-14,15,20-trisnorlabdane-8,13-dione (V), mp 82–83°C [from petroleum ether-diethyl ether (1:1)], [] _D ²⁶ –40° (c 1.7). The same products but in different ratios were formed on the ozonization of (I) in CH₂Cl₂-Py or in hexane followed by decomposition of the ozonide by heating with H₂O. The []_D values were measured in CHCl₃. Details of the IR and PMR spectra are given.Institute of Chemistry, Academy of Sciences of the Moldavian SSR, Kishinev. Institute of Organic Chemistry, Siberian Branch of the USSR Academy of Sciences, Novosibirsk. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 524–527, July–August, 1987.     

Heterogeneous catalysts in the alkylation of imidazoles

The reaction of imidazoles with alcohols at 300–400°C was studied in the presence of heterogeneous -Al₂O₃ catalysts and Y zeolites. The major reaction was found to be N-alkylation. This reaction is accompanied by C-alkylation on -Al₂O₃ while the selectivity relative to N-alkylation is close to 100% on zeolite catalysts. The greatest activity with 100% selectivity was found for H zeolite. The alkylation of methanol and ethanol by 2-methylimidazole at 310–320°C gave 1,2-dimethylimidazole in -100% yield and 1-ethyl-2-methylimidazole in 90% yield respectively. The reaction of methanol and imidazole gave 1-methylimidazole in 99% yield. This catalyst displays high stability and capacity for oxidative regeneration.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 624–628, May, 1994. Original article submitted April 20, 1994.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Thermal decomposition of silver cyano complex and characterization its decomposition products by ETA,DSC, DTA and TG

It was found by DTA and TG that [Phenyl₂I][Ag(CN)₂] in the solid state is chemically stable on heating in argon up to 160°C. During heating to higher temperatures it decomposes, forming volatile products such as [Phenyl]I, [Phenyl]NC and (CN)₂ [1]. After heating the sample to 500°C metallic silver resulted. The volatile and intermediate solid products were analysed by IR-spectroscopy.It was found by means of DTA and ETA that an isophase reversible transition takes place when the sample is heated and cooled, not higher than 100°C. At heating higher than 100°C the sample melts (melting pointT _m=135°C). The enthalpy melting was determined by means of DSC (H=–28 kJ·mol^–1).By means of ETA the disorder degree of the final decomposition product was estimated. The value of the activation energy of radon diffusion in the temperature range 720°–500°C equals 32.6 kJ·mol^–1.Dedicated to Prof. I. N. Bekman Moscow State University at the occasion of his 50th birthday     

Potentiometric studies of the thermodynamics of iodine disproportionation from 4 to 209°C

The equilibrium constant for the disproportionation of iodine in aqueous solution was determined as a function of temperature from 3.8 to 209.0°C using emf measurements in low ionic strength media. The equilibrium constant and associated molal thermodynamic quantities at 25°C are: K₁=1.17±0.62×10^–47, H^o=273±3 kJ-mol^–1, S^o=16±9 J-K^–1-mol^–1, and C _p ^o =–1802±41 J-K^–1-mol^–1. Although the value of K₁ is in excellent agreement with a previous emf measurement at 25°C, these results conflict with the corresponding parameters obtained from the NBS tables. Moreover, at temperatures above ca. 100°C, our measured values for the equilibrium constant diverge strongly from all previous estimates and predictions.     

Cyclopolymerization XXXIII. Radical polymerizations and copolymerizations of 1,6-dienes with 2-phenylallyl group and thermal properties of polymers derived therefrom

Radical polymerizations of α-allyloxymethylstyrene (1) and copolymerizations of α-(2-phenylallyloxy)methylstyrene (2) were undertaken to acquire comprehensive understanding on polymerization behavior of these dienes and to get polymers with high thermal stability and high glass transition temperature (T_g). One of the monofunctional counterparts of 1 is a derivative of α-methylstyrene, the ceiling temperature of which is low, and the other is an allyl compound that is well-known for the low homopolymerization tendency. This means that the intermolecular propagation reactions leading to pendant uncyclized units are suppressed during the polymerization of 1 to yield highly cyclized polymers. In fact, the degree of cyclization of poly(1) obtained at 140 °C attained the value 92%. Structural studies revealed that repeat cyclic units of poly(1) consist exclusively of five-membered rings. Poly(1) was found to be stable up to 300 °C, but its T_g values were detected at around 100 °C. They are considerably lower than the targeted values which should lie between 180 and 220 °C. An additional drawback of poly(1) is its low molecular weight probably due to a degradative chain transfer. For this reason, copolymerizations of 2 with 1 and with styrene were also carried out to seek for the possibility to control the thermal properties precisely. Monomer 2 was chosen, since it has been reported in our previous work that it yields polymers with thermal stability up to 300 °C and T_g higher than 250 °C. Copolymerization of 2 with styrene afforded polymers with desired thermal properties and high molecular weight.     

Two highly proton-conductive molecular hybrids based on ionized water clusters and poly-Keggin-anion chains

Two proton-conductive molecular hybrid complexes, {[Zn(H₂O)₈][H(H₂O)₂](HINO)₄(PMo₁₂O₄₀)}_n (1) and {[Mn(H₂O)₈][H(H₂O)_2.5](HINO)₄(PMo₁₂O₄₀)}_n (2), were constructed by introducing protonated water clusters, transition metal ionized water clusters and [PMo₁₂O₄₀]³⁻ anions in the gallery of H-bonding networks based on isonicotinic acid N-oxide (HINO). Single-crystal X-ray diffraction analyses at 293 K revealed that both complexes presented exactly the same three-dimensional (3D) hydrogen-bonded networks with large one-dimensional (1D) channels. Interestingly, [PMo₁₂O₄₀]³⁻ anions just filled in the 1D channels and self-assembled into poly-Keggin-anion chains. Thermogravimetric analyses both show no weight loss in the temperature range of 20-100 °C, indicating that all water molecules in the unit structure are not easily lost below 100 °C. Surprisingly, the proton conductivities of 1 and 2 in the temperature range of 85-100 °C under 98% RH conditions reached high proton conductivities of 10⁻³ S cm⁻¹. A possible mechanism of the proton conduction was proposed according to the experimental results.     

Cadmium Malonate Complexation in Aqueous Sodium Trifluoromethanesulfonate Media to 75°C; Including Dissociation Quotients of Malonic Acid

The molal formation quotients for cadmium–malonate complexes were measured potentiometrically from 5 to 75°C, at ionic strengths of 0.1, 0.3, 0.6 and 1.0 molal in aqueous sodium trifluoromethanesulfonate (NaTr) media. In addition, the stepwise dissociation quotients for malonic acid were measured in the same medium from 5 to 100°C, at ionic strengths of 0.1, 0.3, 0.6, and 1.0 molal by the same method. The dissociation quotients for malonic acid were modeled as a function of temperature and ionic strength with empirical equations formulated such that the equilibrium constants at infinite dilution were consistent, within the error estimates, with the malonic acid dissociation constants obtained in NaCl media. The equilibrium constants calculated for the dissociation of malonic acid at 25°C and infinite dilution are log K _1a=-2.86 ± 0.01 and log K _2a=-5.71 ± 0.01. A single Cd–malonate species, CdCH₂C₂O₄, was identified from the complexation study and the formation quotients for this species were also modeled as a function of temperature and ionic strength. Thermodynamic parameters obtained by differentiating the equation with respect to temperature for the formation of CdCH₂C₂O₄ at 25°C and infinite dilution are: K = 3.45 ± 0.09, S° = 7 ± 6 kJ-mol^-1, S° = 91 ± 22 J-K^--mol^-1, and C _p ^o =400±300 J­K^-1­mol^-1.     

Formation and skeletal transformations of perfluoroindan-1-one and perfluoroindan-1,3-dione in the reaction of perfluoroindan with SiO2/SbF5

Perfluoroindan-1-one (2) is obtained in the reaction of perfluoroindan (1) with SiO₂/SbF₅ at 70 °C. Compound 1 heated with SiO₂/SbF₅ at 130 °C and then treated with water, gives 3-hydroxy-perfluoro-3-methylphthalide (4). Ketone 2 is converted, under the action of SbF₅ at 130 °C, to perfluoro-2-ethylbenzoic acid (9) and disproportionates to compound 1 and perfluoroindan-1,3-dione (3); the latter is transformed to phthalide 4 under the reaction conditions.     

Dehydrogenation of N-ethyl perhydrocarbazole catalyzed by PCP pincer iridium complexes: Evaluation of a homogenous hydrogen storage system

The iridium complexes IrH₂{C₆H₃-2,6-(CH₂PBu^t₂)₂ (1), IrH₂{C₆H₃-2,6-(CH₂PPrⁱ₂)₂ (2), and IrHCl{C₆H₃-2,6-(OPBu^t₂)₂ (3) have been found to be highly active catalysts for the dehydrogenation of N-ethyl perhydrocarbazole at 200 °C. However, dehydrogenation to the fully unsaturated ethyl carbazole does not occur in most instances. Complex 3 is the most active catalyst and shows reasonable activity even at 150 °C. No signs of dehydrogenation were found in experiments conducted at 100 °C. This apparently reflects the thermodynamic constraints imposed by the high enthalpy of dehydrogenation of the substrate.     

Cationoid rearrangements in reactions of perfluoro-1-arylbenzocyclobutenes with antimony pentafluoride

In the presence of antimony pentafluoride at 130 °C, the four-membered ring of perfluoro-1-(2-ethylphenyl)benzocyclobutene (2) undergoes cleavage, forming perfluoro-2-ethyl-2′-methyldiphenylmethane (5). Compound 5 is converted, under the action of SbF₅ at 170 °C, to perfluoro-8,9-dimethyl-1,2,3,4-tetrahydrofluorene (8). Perfluoro-1-(4-ethylphenyl)benzocyclobutene (3) remains unchanged at 130 °C, whereas at 170 °C it gives a mixture of perfluorinated 4′-ethyl-2-methyldiphenylmethane (9), 6-ethyl-1,2,3,4-tetrahydroanthracene (11) and 2-ethyl-9,10-dihydroanthracene (12). When heated with SbF₅ at 170 °C, perfluoro-1-phenylbenzocyclobutene (1) remains unchanged. Solution of compounds 2, 3, 5 and 9 in SbF₅-SO₂ClF generated the perfluorinated 1-(2-ethylphenyl)-1-benzocyclobutenyl (29), 1-(4-ethylphenyl)-1-benzocyclobutenyl (30), 2-ethyl-2′-methyldiphenylmethyl (31) and 4′-ethyl-2-methyldiphenylmethyl (32) cations, respectively.     

Activity Coefficients of HCl + GdCl3 + H2O System from 5 to 55°C. Application of Pitzer Formalism

The emf of the cell

Ionization constants of benzoic acid from 25 to 250°C and to 2000 bar

The ionization constant of benzoic acid has been determined by conductivity measurements of dilute aqueous solutions and found to vary from 6.27×10^–5 at 25°C to 0.39×10^–5 at 250°C. The pressure effect to 2000 bar has been measured, and the ratio of ionization constants K₂₀₀₀/K₁ is 2.26 at 25°C and 7.3 at 250°C. V°₁, the standard partial molar volume change for the ionization at 1 bar, varies from –11.7 cm³-mol^–1 at 25°C to –60 cm³-mol^–1 at 250°C. The volume changes are smaller at higher pressures.     

Pd-EDTA as an efficient catalyst for Suzuki-Miyaura reactions in water

PdCl₂-EDTA complex 1 is an efficient catalyst for the Suzuki-Miyaura reactions of aryl and heteroaryl halides with aryl(heteroaryl)boronic acids in water at 20-100 °C. Aryl iodides and bromides undergo the cross-coupling with turnover numbers (TON) up to 97,000 and turnover frequencies (TOF) up to 582,000 h⁻¹.     

Preparation and nonlinear optical properties of novel Y-type polyesters with highly enhanced thermal stability of second harmonic generation

3,4-Di-(2′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters (4-5) containing 3,4-dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer main-chains. The resulting polymers 4-5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 89-91 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 2.47 pm/V. The dipole alignment exhibited high thermal stability even at 10 °C higher than T_g, and there is no SHG decay below 100 °C due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.