气相色谱-质谱监测1-溴-2,4-二氟苯的合成条件、贡献及纯度

采用气相色谱-质谱（GC—MS）法对1,3-二氟苯溴化产物定性分析,采用了峰面积归一化法对产物进行定量分析,并通过正交设计结合多指标综合评价法优化合成条件。结果表明,通过GC—MS监测,对正交实验Z值结果分析得到最佳制备工艺：四氯化碳为溶剂,反应摩尔比（间二氟苯与液态溴）2：1,5℃下反应12h。产物纯度高于99．50％     

由三氟异丙烯基溴化镁制备羧酸

以三氟丙烯和溴为原料加成制得1,2-二溴三氟丙烷,脱溴化氢得到2-溴三氟丙烯,再在一定条件下合成2-溴三氟丙烯的格氏试剂（三氟异丙烯基溴化镁）,与CO2反应最终生成1-溴-2-三氟甲基丙酸。 用碳酸钠溶液萃取的方法得到0.8 g产品,纯度为99.6%,收率为3.6%。 对产物进行了MS、IR、1H NMR和13C NMR等表征,并分析了主要副产物1,2-二氟丙二烯和2,3-二三氟甲基-1,3-丁二烯及其与未反应的2-溴三氟丙烯间的[2+2]或[2+4]环加成反应产物。 确定以2-溴三氟丙烯为原料经格氏反应制羧酸较好的反应条件为：以THF为溶剂,1,2-二溴乙烷作引发剂,制备格氏试剂温度为30 ℃,CO2与格氏试剂反应温度为0 ℃。     

4-溴-2,6-二氟苯基氰的合成

以2,6-二氟苯胺为原料,经溴化、重氮化和 Sandermer反应合成液晶中间体4-溴-2,6-二氟苯基氰,研究了反应条件对反应的影响,各步骤产物结构经IR、MS、NMR分析数据得以确定。     

Wohl-Ziegler反应的研究 芳香醚的侧链溴化与苯环溴化

本文报告对-甲苯甲醚在不同情况下与 N-溴代丁二酰亚胺(NBS)的作用。作者认为溶剂是使溴化反应具选择性的一种重要因素。用四氯化碳则可以得到收率为65%的侧链溴化产物,如用冰醋酸则得到收率为68%的苯环溴化产物。我们在研究苯甲醚与 NBS 作用时,观察到有溴放出,而后又有溴化氢气体出现,由于这些现象,使我们进一步研究 NBS与数种溶剂,例如四氯化碳,氯仿,苯及苯腈的作用。同样发现都在不同的时间内能放出溴,并且过氧化苯甲酰对于在每一种上述溶剂中进行的反应都具催化作用,加速放出溴。我们认为芳香醚与 NBS 所进行的苯环溴化的反应机构基本上是与溴的苯环溴化的反应机构相同。据此我们可以解释,(1)何以三氯化铝与过氧化苯甲酰都能够作为苯环溴化的催化剂,(2)何以间-甲苯甲醚与间-二甲氧基苯即使在四氯化碳中也容易苯环溴化,以及(3)何以间-甲苯甲醚不易进行侧链溴化,此外也研究对-甲氧基苯乙酮的侧链溴化与苯环溴化。我们研究对甲氧基乙苯与2,4-二甲氧基乙苯的溴化反应,发现前者很容易进行侧链溴化,这是符合于游离基丙烯型溴化反应机构的,而后者即使在四氯化碳中首先是苯环溴化,如果再加一克分子 NBS,则第二个溴原子能进入侧链。这结果说明在很活化的苯环上即使有侧链,首先、还是苯环溴化。我们也测定了溴进入苯环的位置,这些事实都符合于我们所设想的,芳香醚的 Wohl-Ziegler 苯环溴化基本上是溴进行苯环溴化的吸电子反应机构。2,4-二甲氧基-5-溴苯甲酸可以从2,4-二甲氧基苯乙酮经侧链氧化再进行苯环溴化合成,方法简便,收率良好。     

3-(2-苯并呋喃酰基)薁-1-羧酸甲酯的有效合成

以苯基三甲铵三溴盐(PTAB)为溴化试剂, 对3-乙酰基薁-1-羧酸甲酯进行了溴代反应研究, 将其单溴代产物与水杨醛在温和反应条件下进行缩合, 以极优的收率高选择性得到3-(2-苯并[b]呋喃酰基)薁-1-羧酸甲酯类衍生物, 其结构经¹H NMR, IR及元素分析等得以证实.     

2-薁基取代的苯并[b]呋喃类化合物的合成

以溴代丁二酰亚胺为溴化试剂, 对1-氰基-2-甲基薁进行了溴代反应研究, 将溴甲基化产物与水杨醛类衍生物在通常的加热反应及微波辐射条件下进行缩合, 以较高的收率得到2-薁基取代苯并[b]呋喃, 其结构经¹H NMR, IR及元素分析等得以证实.     

双齿氮配体钯配合物催化的羰化反应研究

研究了双齿氮配体钯（II）配合物催化剂（1-3）在对邻溴碘苯与胺的羰化合成酰胺反应以及炔烃的氧化羰化制备炔酸酯反应中的催化性能,考察了不同条件下催化剂的催化活性并对其反应产物进行了表征.研究结果表明该催化剂在酰胺化合成氮取代邻苯二甲酰亚胺的反应中表现出了较好的催化活性和选择性,分离收率和选择性高达88%和85%;在芳基...     

新型2-苯并呋喃取代奠类衍生物的合成

以溴乙酰溴为酰化剂，对2-甲基奠进行酰基化反应，其酰化产物通过与水杨醛缩合，溴代反应及硫代乙酰胺的环化反应，以较好的收率，高选择性合成了新型的1-（2-苯并[b]呋喃酰基）奠和3-（2-苯并呋喃基）奠类[1，2-c]噻吩类衍生物，其结构经1HNMR，IR及元素分析表征。     

立体选择性合成2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-反式-2,3-二氢呋喃

溴化(a-噻吩甲酰基)甲基三苯鉮1与3-取代苯甲叉基-2,4-戊二酮 2以碳酸钾为碱,在苯中55℃条件下反应,可以较好的收率、高立体选择性地生成反-2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-2,3-二氢呋喃3。产物结构均经波谱予以确定。本文还提出了生成产物的可能机理。     

SO42-/ZrO2催化氯化苄与苯烷基化反应的气相色谱-质谱法分析

采用气相色谱-质谱法(GC/MS)对SO42-/ZrO2固体超强酸催化氯化苄与苯烷基化反应产物的组成与结构进行了分析,并对SO42-/ZrO2催化的选择性进行了初步探讨。结果表明:SO42-/ZrO2固体超强酸对氯化苄与苯的烷基化反应具有良好的催化活性,反应产物主要为二苯甲烷、苄基二苯甲烷与氯甲基二苯甲烷等7种苄基化物。SO42-/ZrO2固体超强酸催化的产物选择性与经典Lew is酸催化特征基本一致。     

Liquid phase bromination of aromatics over zeolite H-beta catalyst

The liquid phase bromination of chlorobenzene, toluene and xylenes (o-, m-, p-) is catalyzed using zeolite as catalyst and N-bromosuccinimide (NBS) as the brominating agent. In addition, the bromination of toluene has been investigated over various zeolites using both NBS and liquid Br₂ as brominating agents. A comparison under similar reaction conditions with H₂SO₄, in the absence of catalyst and FeCl₃ (in the case of toluene) is also investigated for each reaction. Zeolite H-beta is found to be selective compared to the conventional catalysts and other zeolites in the bromination of chlorobenzene and toluene whereas selectivity for 4-bromo-o-xylene (4-BOX/3-BOX) over H-beta and H₂SO₄ was found nearly comparable in the bromination of o-xylene. In the bromination of toluene, acidic H-beta favours the formation of nuclear products whereas in the absence of any catalyst, in the presence of weakly acidic H–Y and potassium exchanged zeolites K-beta and K–L, the concentration of side-chain product, œ-bromotoluene, is enhanced. The conversion of NBS, rate of NBS conversion (mmol g⁻¹ h⁻¹) and selectivity for products are strongly influenced by the reaction parameters. As the reaction time, catalyst amount, reaction temperature and molar ratios of NBS/toluene are increased, an increase in the conversion of NBS is noticed. Presumably, the catalytic bromination of aromatics proceeds by an electrophile (Br⁺) which is generated by the heterolytic cleavage of NBS/Br₂ by an acidic zeolite. Thus, the generated Br⁺ attacks the aromatic ring resulting in the formation of brominated nuclear products.     

Regio - and stereospecific halogenation of 7alogenoalkenes in liquid hydrogen fluoride

The products of bromo and chlorofluorination of E and Z-1,2-dichloroethylenes, 1, 3-dichloro-1-propenes, 1, 1-dichloro- ethylene and 1, 3-dichloro-2-fluoro-1-propene by N-bromosuccinimide and hexachloromelamine in anhydrous hydrogen fluoride have been studied. It was found that the reaction was in all cases 100% regio and 93–100% trans-stereospecific with the exception of E-1, 2-dichloro-ethylene, its trans-stereospecificity being 85%.Threo and erithro-1-bromo-1, 2-dichloro-2-fluoroethanes, 2-bromo-1, 3-dichloro-1-fluoropropanes and 1, 2, 3-trichloro-1-fluoro-propanes as well 1, 1, 2-trichloro-2-fluoroethane, 1-bromo-2, 2-dichloro-2-fluoroethane, 1, 2, 2-trichloro-2 fluoroethane, 1-bromo-1, 3-dichloro-2, 2-difluoropropane, and 1, 1, 3-trichloro-2,2-difluoropropane were obtained in 50–70% yield.The bromination of E and Z-1, 3-dichloro-1-propenes with molecular bromine in carbon tetrachloride in the dark is non-stereospecific and gives a mixture of erithro and threo-1, 2-dibromo-1, 3-dichloropropanes in the ratio about 1:1. However, the bromination reaction in anhydrous hydrogen fluoride solution proceeds with a high degree of stereospecificity (94–95%) and gives threo-1, 2-dibromo-1, 3-dichloropropane from Z and erithro-1, 2-dibromo-1, 3-dichloropropane from E-1, 3-dichloro-1-propene.The data obtained are considered in terms of an electrophilic mechanism of halogenoalkene halogenation in anhydrous hydrogen fluoride and a free-radical mechanism in carbon tetrachloride.     

甲基芳烃的侧链溴化新方法研究

溴苄类化合物在医药、农药和染料等领域有广泛的应用, 在以往的报道中由甲基芳烃制备溴苄类化合物的方法都是采用自由基的历程进行的. 报道了一种以甲基芳烃与三溴化硼直接反应采用非自由基的历程制备系列溴甲基芳烃的新方法. 该方法反应条件温和、收率高、选择性好. 在考察电子效应和位阻效应时发现: 该方法对不同取代基的底物适应范围广, 带推电子取代基对反应有利; 取代基位阻有一定影响但是没有吸电子基团显著, 吸电子基团降低产率. 同时, 在研究溶剂、温度、三溴化硼用量和时间对反应的影响时找到了最佳反应条件.     

气相色谱-质谱法研究多卤代产物的组成和结构

在制备取代的１,４－己二烯过程中,在钯（Ⅱ）催化下烯丙基溴对１,４－二氯－２－丁炔的加成反应生成了一系列未曾预料的复杂产物,运用气相色谱－质谱法（ＧＣ－ＭＳ）对产物进行了逐个分析。分析结果显示：（１）８个化合物中除两个为预期产物外,其余均为氯和溴交换反应的副产物,并且８个化合物中的每两个为一对几何异构体;（２）４对几何异构体中Ｚ／Ｅ的比例随着分子量的增加而逐渐下降。     

Novel synthesis of desymmetrized resorcinol derivatives: aryl fluoride displacement on deactivated substrates

A short, high-yielding synthesis of differentially substituted resorcinol derivatives has been developed that utilizes 1,3-difluorobenzene as the starting material and employs sequential nucleophilic aromatic substitution (S(N)Ar) reactions to generate desymmetrized products. The scope and limitations of the second S(N)Ar reaction on the deactivated 1-alkoxy-3-fluorobenzene intermediates have been investigated. This methodology has also been employed in the synthesis of desymmetrized catechol derivatives from 1,2-difluorobenzene.     

Alkane bromination revisited: "reproportionation" in gas-phase methane bromination leads to higher selectivity for CH3Br at moderate temperatures

The reaction of methane and bromine is a mildly exothermic and exergonic example of free radical alkane activation. We show here that the reaction of methane and bromine (CH4:Br2 > or = 1) may yield either a kinetically or a thermodynamically determined bromomethane product distribution and proceeds in two main phases between 450 and 550 degrees C under ambient pressure on the laboratory time scale. This is in contrast to the highly exothermic methane fluorination or chlorination reactions, which give kinetic product distributions, and to the endergonic iodination of methane, which yields an equilibrium distribution of iodomethanes. The first phase of reaction between methane and bromine is a relatively rapid consumption of bromine to yield a kinetic methane bromination product distribution characterized by low methane conversion, low methyl bromide selectivity, and higher polybromomethane selectivity. In the second slower phase CHxBr(4-x) reproportionation leads to significantly higher methane conversion and higher methyl bromide selectivity. For methane bromination at 525 degrees C, CH4 conversion and CH3Br selectivity reach 73.5% and 69.5%, respectively, after ample (60 s) time for reproportionation. The high selectivity and simple configuration make this pathway an attractive candidate for scale-up in halogen-mediated methane partial oxidation processes.     

二氧化硅负载磷钨酸铵催化苯酚氧化溴代反应

以溶胶-凝胶法制备的二氧化硅负载磷钨酸铵为催化剂,溴化钾为溴源,双氧水为氧化剂,冰醋酸为溶剂,实现了苯酚的催化氧化溴代反应。 探讨了催化剂负载量、催化剂用量和反应时间等反应参数对氧化溴代反应的影响。 结果表明,溶胶-凝胶法制备的负载磷钨酸铵仍具有典型的Keggin结构;在室温的温和条件下,该催化剂表现出较强的催化苯酚氧化溴代反应活性和较高的对溴苯酚选择性,在实验优化条件下,苯酚转化率达到95.4%,对邻比达到3.2;而且催化剂易回收,重复4次使用后,催化活性有所降低,苯酚转化率为87.4%,对邻比为1.6。     

Unexpected regioselectivity observed in the bromination and epoxidation reactions of p-benzoquinone-fused norbornadiene: An experimental and computational study

The bromination reaction of p-benzoquinone-fused norbornadiene was studied at various temperatures (?78, ?50, 0, 25, and 77 °C). At room temperature, the double bonds of the p-benzoquinone units were mainly brominated. The double bond of the norbornene unit also underwent a bromination reaction in a yield of only 2%. However, the reaction at ?78 °C resulted in the formation of products derived from the attack of bromine on the norbornene double bond with higher charge density. In contrast to the bromination reaction, the epoxidation reaction of the same compound with m-chloroperbenzoic acid and dimethyldioxirane exclusively resulted in the formation of products derived from the addition to the double bond of norbornadiene. The regioselectivity observed was investigated and the results were supported by theoretical calculations.